Skip to contentSkip to conversation

staging: greybus: Cleanups in loopback_test

PATCH In review Jack Schofield 2 participants 6 messages Dec 1, 2022 – Dec 2, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover staging: greybus: Cleanups in loopback_test

Correct issues found by checkpatch.

Jack Schofield (3):
staging: greybus: loopback_test: Add blank line after declaration.
staging: greybus: loopback_test: Remove void function return statement
staging: greybus: loopback_test: Remove extra blank lines

 drivers/staging/greybus/tools/loopback_test.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

base-commit: 9dadff066244543780e5d9ee406b3ec7af19e22c

Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/3 staging: greybus: loopback_test: Add blank line after declaration.

Declarations are to be followed by a blank line. Add to follow Linux Kernel coding style. Issue reported by checkpatch.

---
 drivers/staging/greybus/tools/loopback_test.c | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/greybus/tools/loopback_test.c +1 -0
index 4c42e393cd3d..242138c4f6cf 100644
@@ -675,6 +675,7 @@ static int open_poll_files(struct loopback_test *t)
 static int close_poll_files(struct loopback_test *t)
 {
 	int i;
+
 	for (i = 0; i < t->poll_count; i++)
 		close(t->fds[i].fd);
 
Signature · 1 line
2.25.1
#2 lore raw

PATCH 2/3 staging: greybus: loopback_test: Remove void function return statement

In reply to Jack Schofield

Void function return statement is not useful in this case. Issue reported by checkpatch.

---
 drivers/staging/greybus/tools/loopback_test.c | 1 -
 1 file changed, 1 deletion(-)
drivers/staging/greybus/tools/loopback_test.c +0 -1
index 242138c4f6cf..7c1697304ab4 100644
@@ -862,7 +862,6 @@ void loopback_run(struct loopback_test *t)
 
 err:
 	printf("Error running test\n");
-	return;
 }
 
 static int sanity_check(struct loopback_test *t)
Signature · 1 line
2.25.1
#3 lore raw

PATCH 3/3 staging: greybus: loopback_test: Remove extra blank lines

In reply to Jack Schofield

Clean up extra uses of blank lines that do not follow the kernel coding style. Issue reported by checkpatch.

---
 drivers/staging/greybus/tools/loopback_test.c | 13 -------------
 1 file changed, 13 deletions(-)
drivers/staging/greybus/tools/loopback_test.c +0 -13
index 7c1697304ab4..d7ad51ff60c5 100644
@@ -239,7 +239,6 @@ static void show_loopback_devices(struct loopback_test *t)
 
 	for (i = 0; i < t->device_count; i++)
 		printf("device[%d] = %s\n", i, t->devices[i].name);
-
 }
 
 int open_sysfs(const char *sys_pfx, const char *node, int flags)
@@ -274,7 +273,6 @@ float read_sysfs_float_fd(int fd, const char *sys_pfx, const char *node)
 	char buf[SYSFS_MAX_INT];
 
 	if (read(fd, buf, sizeof(buf)) < 0) {
-
 		fprintf(stderr, "unable to read from %s%s %s\n", sys_pfx, node,
 			strerror(errno));
 		close(fd);
@@ -367,7 +365,6 @@ static int get_results(struct loopback_test *t)
 			r->apbridge_unipro_latency_max - r->apbridge_unipro_latency_min;
 		r->gbphy_firmware_latency_jitter =
 			r->gbphy_firmware_latency_max - r->gbphy_firmware_latency_min;
-
 	}
 
 	/*calculate the aggregate results of all enabled devices */
@@ -407,7 +404,6 @@ static int get_results(struct loopback_test *t)
 			r->apbridge_unipro_latency_max - r->apbridge_unipro_latency_min;
 		r->gbphy_firmware_latency_jitter =
 			r->gbphy_firmware_latency_max - r->gbphy_firmware_latency_min;
-
 	}
 
 	return 0;
@@ -536,7 +532,6 @@ static int log_results(struct loopback_test *t)
 			fprintf(stderr, "unable to open %s for appending\n", file_name);
 			abort();
 		}
-
 	}
 	for (i = 0; i < t->device_count; i++) {
 		if (!device_enabled(t, i))
@@ -550,10 +545,8 @@ static int log_results(struct loopback_test *t)
 			if (ret == -1)
 				fprintf(stderr, "unable to write %d bytes to csv.\n", len);
 		}
-
 	}
 
-
 	if (t->aggregate_output) {
 		len = format_output(t, &t->aggregate_results, "aggregate",
 				    data, sizeof(data), &tm);
@@ -741,7 +734,6 @@ static int wait_for_complete(struct loopback_test *t)
 		ts = &t->poll_timeout;
 
 	while (1) {
-
 		ret = ppoll(t->fds, t->poll_count, ts, &mask_old);
 		if (ret <= 0) {
 			stop_tests(t);
@@ -781,7 +773,6 @@ static void prepare_devices(struct loopback_test *t)
 		if (t->stop_all || device_enabled(t, i))
 			write_sysfs_val(t->devices[i].sysfs_entry, "type", 0);
 
-
 	for (i = 0; i < t->device_count; i++) {
 		if (!device_enabled(t, i))
 			continue;
@@ -824,7 +815,6 @@ static int start(struct loopback_test *t)
 	return 0;
 }
 
-
 void loopback_run(struct loopback_test *t)
 {
 	int i;
@@ -853,7 +843,6 @@ void loopback_run(struct loopback_test *t)
 	if (ret)
 		goto err;
 
-
 	get_results(t);
 
 	log_results(t);
@@ -881,10 +870,8 @@ static int sanity_check(struct loopback_test *t)
 			fprintf(stderr, "Bad device mask %x\n", (1 << i));
 			return -1;
 		}
-
 	}
 
-
 	return 0;
 }
 
Signature · 1 line
2.25.1
maintainer Reviewed-by on the v1 series
#4 lore raw
In reply to Jack Schofield
Quoted 4 lines · Jack Schofield

Correct issues found by checkpatch.

Jack Schofield (3):
staging: greybus: loopback_test: Add blank line after declaration.

Nit: no need for a full stop in the commit summary.

Quoted 5 lines

staging: greybus: loopback_test: Remove void function return statement
staging: greybus: loopback_test: Remove extra blank lines

 drivers/staging/greybus/tools/loopback_test.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

Other than that, all of these look good to me:

Johan

#5 lore raw
Quoted 8 lines · Johan Hovold
Quoted 1 line · Jack Schofield

staging: greybus: loopback_test: Add blank line after declaration.

Nit: no need for a full stop in the commit summary.

Other than that, all of these look good to me:

Thank you for the review. I've realized I've left off maintainers and will revise and resend, with correct maintainers and the correction you suggest.

Jack Schofield