Add definitions for AST2600 i3c clocks and resets

PATCH Superseded Jeremy Kerr 2 participants 12 messages Feb 13, 2023

Subsystems (2)

Device tree bindings Common clk

lore

Share & tools

lore

Jeremy Kerr

author

2023-02-13 06:02 UTC #0 lore raw

v2 cover Add definitions for AST2600 i3c clocks and resets

This series adds some base configuration for the i3c controllers on ast2600 hardware. We'll use the reset and clock definitions in the proposed dt binding example, hence sending these first.

v2:
* based on feedback from Joel Stanley: avoid adding RESERVED clock definitions, allowing empty entries in aspeed_g6_gates instead.

Jeremy Kerr (3):
clk: ast2600: allow empty entries in aspeed_g6_gates
clk: aspeed: Add full configs for i3c clocks
dts: ast2600: Add reset config for I3C

 drivers/clk/clk-ast2600.c                 | 41 ++++++++++++++++++-----
 include/dt-bindings/clock/ast2600-clock.h |  9 +++--
 2 files changed, 40 insertions(+), 10 deletions(-)

Signature · 1 line

2.39.1

Jeremy Kerr

author

2023-02-13 06:02 UTC #1 lore raw

PATCH v2 1/3 clk: ast2600: allow empty entries in aspeed_g6_gates

We're about to remove an entry from aspeed_g6_gates, but we won't want to alter existing entries. This change allows empty entries in the gates array.

Signed-off-by Jeremy Kerr <[email protected]>

---
 drivers/clk/clk-ast2600.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/clk/clk-ast2600.c +3 -0

index 9c3305bcb27a..1f08ff3c60fa 100644
@@ -652,6 +652,9 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
 		u32 gate_flags;
 
+		if (!gd->name)
+			continue;
+
 		/*
 		 * Special case: the USB port 1 clock (bit 14) is always
 		 * working the opposite way from the other ones.

Signature · 1 line

2.39.1

Jeremy Kerr

author

2023-02-13 06:02 UTC #2 lore raw

PATCH v2 2/3 clk: aspeed: Add full configs for i3c clocks

In reply to Jeremy Kerr

The current ast2600 i3c clock definitions are top-level (rather than based on their actual hw sources: either HCLK or APLL), and include a couple of definitions for (non-existent) i3c6 and i3c7.

This change re-parents these to the main i3c clock, explicitly sourced from the APLL rather than whatever G6_CLK_SELECTION5 was last set to. We also remove the i3c6 and i3c7 definitions.

This change is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7 from Aspeed's own tree, originally by Dylan Hung <[email protected]>.

Signed-off-by Jeremy Kerr <[email protected]>

---
 drivers/clk/clk-ast2600.c                 | 38 ++++++++++++++++++-----
 include/dt-bindings/clock/ast2600-clock.h |  3 +-
 2 files changed, 31 insertions(+), 10 deletions(-)

drivers/clk/clk-ast2600.c +30 -8

index 1f08ff3c60fa..45549cb18107 100644
@@ -4,6 +4,7 @@
 
 #define pr_fmt(fmt) "clk-ast2600: " fmt
 
+#include <linux/bitfield.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>

@@ -32,6 +33,18 @@
 #define ASPEED_G6_CLK_SELECTION1	0x300
 #define ASPEED_G6_CLK_SELECTION2	0x304
 #define ASPEED_G6_CLK_SELECTION4	0x310
+#define ASPEED_G6_CLK_SELECTION5	0x314
+#define   I3C_CLK_SELECTION		BIT(31)
+#define     I3C_CLK_SELECT_HCLK		0
+#define     I3C_CLK_SELECT_APLL_DIV	1
+#define   APLL_DIV_SELECTION		GENMASK(30, 28)
+#define     APLL_DIV_2			0b001
+#define     APLL_DIV_3			0b010
+#define     APLL_DIV_4			0b011
+#define     APLL_DIV_5			0b100
+#define     APLL_DIV_6			0b101
+#define     APLL_DIV_7			0b110
+#define     APLL_DIV_8			0b111
 
 #define ASPEED_HPLL_PARAM		0x200
 #define ASPEED_APLL_PARAM		0x210

@@ -97,14 +110,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
 	[ASPEED_CLK_GATE_LHCCLK]	= { 37, -1, "lhclk-gate",	"lhclk", 0 },	/* LPC master/LPC+ */
 	/* Reserved 38 RSA: no longer used */
 	/* Reserved 39 */
-	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	NULL,	 0 },	/* I3C0 */
-	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	NULL,	 0 },	/* I3C1 */
-	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	NULL,	 0 },	/* I3C2 */
-	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	NULL,	 0 },	/* I3C3 */
-	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	NULL,	 0 },	/* I3C4 */
-	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	NULL,	 0 },	/* I3C5 */
-	[ASPEED_CLK_GATE_I3C6CLK]	= { 46,  46, "i3c6clk-gate",	NULL,	 0 },	/* I3C6 */
-	[ASPEED_CLK_GATE_I3C7CLK]	= { 47,  47, "i3c7clk-gate",	NULL,	 0 },	/* I3C7 */
+	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	"i3cclk", 0 }, /* I3C0 */
+	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	"i3cclk", 0 }, /* I3C1 */
+	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	"i3cclk", 0 }, /* I3C2 */
+	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	"i3cclk", 0 }, /* I3C3 */
+	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	"i3cclk", 0 }, /* I3C4 */
+	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	"i3cclk", 0 }, /* I3C5 */
+	/* Reserved: 46 & 47 */
 	[ASPEED_CLK_GATE_UART1CLK]	= { 48,  -1, "uart1clk-gate",	"uart",	 0 },	/* UART1 */
 	[ASPEED_CLK_GATE_UART2CLK]	= { 49,  -1, "uart2clk-gate",	"uart",	 0 },	/* UART2 */
 	[ASPEED_CLK_GATE_UART3CLK]	= { 50,  -1, "uart3clk-gate",	"uart",  0 },	/* UART3 */

@@ -775,6 +787,16 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	/* USB 2.0 port1 phy 40MHz clock */
 	hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+	/* i3c clock: source from apll, divide by 8 */
+	regmap_read(map, ASPEED_G6_CLK_SELECTION5, &val);
+	val &= ~(I3C_CLK_SELECTION | APLL_DIV_SELECTION);
+	val |= FIELD_PREP(I3C_CLK_SELECTION, I3C_CLK_SELECT_APLL_DIV);
+	val |= FIELD_PREP(APLL_DIV_SELECTION, APLL_DIV_8);
+	regmap_write(map, ASPEED_G6_CLK_SELECTION5, val);
+
+	hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
 };
 
 static void __init aspeed_g6_cc_init(struct device_node *np)

include/dt-bindings/clock/ast2600-clock.h +1 -2

index d8b0db2f7a7d..600549d7bee8 100644
@@ -57,8 +57,6 @@
 #define ASPEED_CLK_GATE_I3C3CLK		40
 #define ASPEED_CLK_GATE_I3C4CLK		41
 #define ASPEED_CLK_GATE_I3C5CLK		42
-#define ASPEED_CLK_GATE_I3C6CLK		43
-#define ASPEED_CLK_GATE_I3C7CLK		44
 
 #define ASPEED_CLK_GATE_FSICLK		45

@@ -87,6 +85,7 @@
 #define ASPEED_CLK_MAC2RCLK		68
 #define ASPEED_CLK_MAC3RCLK		69
 #define ASPEED_CLK_MAC4RCLK		70
+#define ASPEED_CLK_I3C			74
 
 /* Only list resets here that are not part of a gate */
 #define ASPEED_RESET_ADC		55

Signature · 1 line

2.39.1

Krzysztof Kozlowski

2023-02-13 08:44 UTC #3 lore raw

PATCH v2 2/3 clk: aspeed: Add full configs for i3c clocks

Quoted 3 lines · Jeremy Kerr

The current ast2600 i3c clock definitions are top-level (rather than based on their actual hw sources: either HCLK or APLL), and include a couple of definitions for (non-existent) i3c6 and i3c7.

Why do you use subject prefix in patch 1 different than in patch 2?

Best regards,
Krzysztof

Krzysztof Kozlowski

2023-02-13 09:48 UTC #4 lore raw

PATCH v2 2/3 clk: aspeed: Add full configs for i3c clocks

In reply to Jeremy Kerr

Quoted 8 lines · Jeremy Kerr

The current ast2600 i3c clock definitions are top-level (rather than based on their actual hw sources: either HCLK or APLL), and include a couple of definitions for (non-existent) i3c6 and i3c7.
This change re-parents these to the main i3c clock, explicitly sourced from the APLL rather than whatever G6_CLK_SELECTION5 was last set to. We also remove the i3c6 and i3c7 definitions.

Quoted 8 lines

This change is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7 from Aspeed's own tree, originally by Dylan Hung <[email protected]>.
Signed-off-by Jeremy Kerr <[email protected]>
---
 drivers/clk/clk-ast2600.c                 | 38 ++++++++++++++++++-----
 include/dt-bindings/clock/ast2600-clock.h |  3 +-

My comments from v1:

Bindings are always separate patches.

Quoted 77 lines

 2 files changed, 31 insertions(+), 10 deletions(-)

drivers/clk/clk-ast2600.c +30 -8

index 1f08ff3c60fa..45549cb18107 100644
@@ -4,6 +4,7 @@
 
 #define pr_fmt(fmt) "clk-ast2600: " fmt
 
+#include <linux/bitfield.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>

@@ -32,6 +33,18 @@
 #define ASPEED_G6_CLK_SELECTION1	0x300
 #define ASPEED_G6_CLK_SELECTION2	0x304
 #define ASPEED_G6_CLK_SELECTION4	0x310
+#define ASPEED_G6_CLK_SELECTION5	0x314
+#define   I3C_CLK_SELECTION		BIT(31)
+#define     I3C_CLK_SELECT_HCLK		0
+#define     I3C_CLK_SELECT_APLL_DIV	1
+#define   APLL_DIV_SELECTION		GENMASK(30, 28)
+#define     APLL_DIV_2			0b001
+#define     APLL_DIV_3			0b010
+#define     APLL_DIV_4			0b011
+#define     APLL_DIV_5			0b100
+#define     APLL_DIV_6			0b101
+#define     APLL_DIV_7			0b110
+#define     APLL_DIV_8			0b111
 
 #define ASPEED_HPLL_PARAM		0x200
 #define ASPEED_APLL_PARAM		0x210

@@ -97,14 +110,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
 	[ASPEED_CLK_GATE_LHCCLK]	= { 37, -1, "lhclk-gate",	"lhclk", 0 },	/* LPC master/LPC+ */
 	/* Reserved 38 RSA: no longer used */
 	/* Reserved 39 */
-	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	NULL,	 0 },	/* I3C0 */
-	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	NULL,	 0 },	/* I3C1 */
-	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	NULL,	 0 },	/* I3C2 */
-	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	NULL,	 0 },	/* I3C3 */
-	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	NULL,	 0 },	/* I3C4 */
-	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	NULL,	 0 },	/* I3C5 */
-	[ASPEED_CLK_GATE_I3C6CLK]	= { 46,  46, "i3c6clk-gate",	NULL,	 0 },	/* I3C6 */
-	[ASPEED_CLK_GATE_I3C7CLK]	= { 47,  47, "i3c7clk-gate",	NULL,	 0 },	/* I3C7 */
+	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	"i3cclk", 0 }, /* I3C0 */
+	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	"i3cclk", 0 }, /* I3C1 */
+	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	"i3cclk", 0 }, /* I3C2 */
+	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	"i3cclk", 0 }, /* I3C3 */
+	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	"i3cclk", 0 }, /* I3C4 */
+	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	"i3cclk", 0 }, /* I3C5 */
+	/* Reserved: 46 & 47 */
 	[ASPEED_CLK_GATE_UART1CLK]	= { 48,  -1, "uart1clk-gate",	"uart",	 0 },	/* UART1 */
 	[ASPEED_CLK_GATE_UART2CLK]	= { 49,  -1, "uart2clk-gate",	"uart",	 0 },	/* UART2 */
 	[ASPEED_CLK_GATE_UART3CLK]	= { 50,  -1, "uart3clk-gate",	"uart",  0 },	/* UART3 */

@@ -775,6 +787,16 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	/* USB 2.0 port1 phy 40MHz clock */
 	hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+	/* i3c clock: source from apll, divide by 8 */
+	regmap_read(map, ASPEED_G6_CLK_SELECTION5, &val);
+	val &= ~(I3C_CLK_SELECTION | APLL_DIV_SELECTION);
+	val |= FIELD_PREP(I3C_CLK_SELECTION, I3C_CLK_SELECT_APLL_DIV);
+	val |= FIELD_PREP(APLL_DIV_SELECTION, APLL_DIV_8);
+	regmap_write(map, ASPEED_G6_CLK_SELECTION5, val);
+
+	hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
 };
 
 static void __init aspeed_g6_cc_init(struct device_node *np)

include/dt-bindings/clock/ast2600-clock.h +0 -0

index d8b0db2f7a7d..600549d7bee8 100644

include/dt-bindings/clock/ast2600-clock.h line 61

Quoted 5 lines

include/dt-bindings/clock/ast2600-clock.h +0 -2

@@ -57,8 +57,6 @@
 #define ASPEED_CLK_GATE_I3C3CLK		40
 #define ASPEED_CLK_GATE_I3C4CLK		41
 #define ASPEED_CLK_GATE_I3C5CLK		42
-#define ASPEED_CLK_GATE_I3C6CLK		43
-#define ASPEED_CLK_GATE_I3C7CLK		44

This is an ABI break and commit msg does not really justify it.

Jeremy Kerr

author

2023-02-13 12:34 UTC #5 lore raw

PATCH v2 2/3 clk: aspeed: Add full configs for i3c clocks

Hi Krzysztof,

Quoted 1 line

Bindings are always separate patches.

OK, I'll split these up into the dt-bindings and the clk changes.

Quoted 4 lines

Quoted 4 lines
include/dt-bindings/clock/ast2600-clock.h +0 -0
index d8b0db2f7a7d..600549d7bee8 100644

Quoted 8 lines

include/dt-bindings/clock/ast2600-clock.h
Quoted 6 lines
include/dt-bindings/clock/ast2600-clock.h +0 -0
@@ -57,8 +57,6 @@
?#define ASPEED_CLK_GATE_I3C3CLK????????????????40 ?#define ASPEED_CLK_GATE_I3C4CLK????????????????41 ?#define ASPEED_CLK_GATE_I3C5CLK????????????????42
include/dt-bindings/clock/ast2600-clock.h +0 -2
-#define ASPEED_CLK_GATE_I3C6CLK????????????????43
-#define ASPEED_CLK_GATE_I3C7CLK????????????????44
This is an ABI break and commit msg does not really justify it.

I'll add more rationale there.

Cheers,

Jeremy

Jeremy Kerr

author

2023-02-13 06:02 UTC #6 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

In reply to Jeremy Kerr

This change adds the reset line definitions for the AST2600 I3C block's reset inputs.

Signed-off-by Jeremy Kerr <[email protected]>

---
 include/dt-bindings/clock/ast2600-clock.h | 6 ++++++
 1 file changed, 6 insertions(+)

include/dt-bindings/clock/ast2600-clock.h +6 -0

index 600549d7bee8..16b7389bbb9c 100644
@@ -90,6 +90,12 @@
 /* Only list resets here that are not part of a gate */
 #define ASPEED_RESET_ADC		55
 #define ASPEED_RESET_JTAG_MASTER2	54
+#define ASPEED_RESET_I3C5		45
+#define ASPEED_RESET_I3C4		44
+#define ASPEED_RESET_I3C3		43
+#define ASPEED_RESET_I3C2		42
+#define ASPEED_RESET_I3C1		41
+#define ASPEED_RESET_I3C0		40
 #define ASPEED_RESET_I3C_DMA		39
 #define ASPEED_RESET_PWM		37
 #define ASPEED_RESET_PECI		36

Signature · 1 line

2.39.1

Krzysztof Kozlowski

2023-02-13 08:44 UTC #7 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

Quoted 2 lines · Jeremy Kerr

This change adds the reset line definitions for the AST2600 I3C block's reset inputs.

1. Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

2. This is not DTS. There is nothing from DTS here.
Use subject prefixes matching the subsystem (which you can get for example with git log --oneline -- DIRECTORY_OR_FILE on the directory your patch is touching).

Best regards,
Krzysztof

Jeremy Kerr

author

2023-02-13 09:02 UTC #8 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

Hi Krzysztof,

Quoted 1 line

2. This is not DTS. There is nothing from DTS here.

[and from, your reply on patch 2/3:]

Quoted 1 line

Why do you use subject prefix in patch 1 different than in patch 2?

Ack, will change to "clk:"; there is quite a mix of "dt-bindings:" and "clk:" on the changes within this dir. I'll unify across the series.

Cheers,

Jeremy

Krzysztof Kozlowski

2023-02-13 09:06 UTC #9 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

Quoted 11 lines · Jeremy Kerr

Hi Krzysztof,
Quoted 1 line
2. This is not DTS. There is nothing from DTS here.
[and from, your reply on patch 2/3:]
Quoted 1 line
Why do you use subject prefix in patch 1 different than in patch 2?
Ack, will change to "clk:"; there is quite a mix of "dt-bindings:" and "clk:" on the changes within this dir. I'll unify across the series.

There was clk already, wasn't it? What do you want to change? I asked why do you call it in the same patchset aspeed and as2600?

Best regards,
Krzysztof

Jeremy Kerr

author

2023-02-13 09:23 UTC #10 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

Hi Krzysztof,

Quoted 2 lines

There was clk already, wasn't it? What do you want to change? I asked why do you call it in the same patchset aspeed and as2600?

There was "clk" and "dts", where the latter should have probably been either also "clk" or "dt-bindings".

I'll unify the "aspeed" to "ast2600".

Cheers,

Jeremy

Krzysztof Kozlowski

2023-02-13 09:31 UTC #11 lore raw

PATCH v2 3/3 dts: ast2600: Add reset config for I3C

Quoted 6 lines · Jeremy Kerr

Hi Krzysztof,
Quoted 2 lines
There was clk already, wasn't it? What do you want to change? I asked why do you call it in the same patchset aspeed and as2600?
There was "clk" and "dts",

In patch 1 and 2? Please point me.

Quoted 2 lines

where the latter should have probably been either
also "clk" or "dt-bindings".

Aren't you referring to some other comment now?

Quoted 7 lines

I'll unify the "aspeed" to "ast2600".
Cheers,
Jeremy

Best regards,
Krzysztof