arm64: dts: renesas: Remove bogus voltages from OPP table
Subsystems (2)
Geert Uytterhoeven
maintainercover arm64: dts: renesas: Remove bogus voltages from OPP table
Hi all,
The System CPU cores on R-Car E3 and RZ/G2E do not have their own power supplies, but use the common internal power supplies (typical 1.03V). However, their Operating Performance Points tables do list 0.82V voltages for the various operating points, which are clearly bogus. Hence this series removes the bogus properties.
This has been tested on the Ebisu 4D-development board with R-Car E3, where CPUfreq works as before.
I intend to queue this series in renesas-devel for v6.4.
Thanks for your comments!
Geert Uytterhoeven (2):
arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 3 --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 3 --- 2 files changed, 6 deletions(-)
Signature · 12 lines
2.34.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsGeert Uytterhoeven
maintainerPATCH 1/2 arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
According to the R-Car Series, 3rd Generation Hardware User’s Manual Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating Performance Points table. They are optional, and unused, when none of the CPU nodes is tied to a regulator using the "cpu-supply" property.
--- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 3 --- 1 file changed, 3 deletions(-)
arch/arm64/boot/dts/renesas/r8a77990.dtsi +0 -3
@@ -49,17 +49,14 @@ cluster1_opp: opp-table-1 { opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; };
Signature · 1 line
2.34.1
Geert Uytterhoeven
maintainerPATCH 2/2 arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
In reply to Geert UytterhoevenAccording to the RZ/G Series, 2nd Generation Hardware User’s Manual Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating Performance Points table. They are optional, and unused, when none of the CPU nodes is tied to a regulator using the "cpu-supply" property.
--- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 3 --- 1 file changed, 3 deletions(-)
arch/arm64/boot/dts/renesas/r8a774c0.dtsi +0 -3
@@ -49,17 +49,14 @@ cluster1_opp: opp-table-1 { opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; };
Signature · 1 line
2.34.1