staging: rtl8192e: code cleanup patches
v2 cover staging: rtl8192e: code cleanup patches
Fix several cleanup issues reported by checkpatch.pl in module staging/rtl8192e in file rtllib_rx.c
Changes in v2:
- Resent patchset with the correct email address
Khadija Kamran (4):
staging: rtl8192e: remove extra blank lines
staging: rtl8192e: add blank lines after declarations
staging: rtl8192e: add spaces around binary operators
staging: rtl8192e: remove blank lines after '{'
drivers/staging/rtl8192e/rtllib_rx.c | 73 +++++++++++----------------- 1 file changed, 29 insertions(+), 44 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/4 staging: rtl8192e: remove extra blank lines
Remove extra blank lines as reported by checkpatch.pl
"CHECK: Please don't use multiple blank lines"
--- drivers/staging/rtl8192e/rtllib_rx.c | 13 ------------- 1 file changed, 13 deletions(-)
drivers/staging/rtl8192e/rtllib_rx.c +0 -13
@@ -154,7 +154,6 @@ rtllib_frag_cache_get(struct rtllib_device *ieee,return skb; } -/* Called only as a tasklet (software IRQ) */ static int rtllib_frag_cache_invalidate (struct rtllib_device *ieee,struct rtllib_hdr_4addr *hdr)
@@ -318,7 +317,6 @@ rtllib_rx_frame_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,return res; } -/* Called only as a tasklet (software IRQ), by rtllib_rx */ static inline int rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,
@@ -355,7 +353,6 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,return 0 ; } -/* this function is stolen from ipw2200 driver*/ #define IEEE_PACKET_RETRY_TIME (5*HZ) static int is_duplicate_packet(struct rtllib_device *ieee,
@@ -887,7 +884,6 @@ static u8 parse_subframe(struct rtllib_device *ieee, struct sk_buff *skb,return rxb->nr_subframes; } -static size_t rtllib_rx_get_hdrlen (struct rtllib_device *ieee,struct sk_buff *skb,struct rtllib_rx_stats *rx_stats)
@@ -1569,7 +1565,6 @@ static int rtllib_verify_qos_info(struct rtllib_qos_information_elementreturn 0 ; } -/* Parse a QoS parameter element */ static int rtllib_read_qos_param_element( struct rtllib_qos_parameter_info *element_param,
@@ -1599,7 +1594,6 @@ static int rtllib_read_qos_info_element(return rtllib_verify_qos_info (element_info,QOS_OUI_INFO_SUB_TYPE ); } -/* Write QoS parameters from the ac parameters. */ static int rtllib_qos_convert_ac_to_parameters (struct rtllib_qos_parameter_info *param_elm,struct rtllib_qos_data *qos_data)
@@ -1843,7 +1837,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, } } -if (*tmp_htinfo_len ==0 ) { if (info_element->len >= 4 && info_element->data[0] == 0x00 &&
@@ -1932,7 +1925,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, info_element->data[2] == 0x96) network->cisco_cap_exist = true; - if (info_element->len >= 3 && info_element->data[0] == 0x00 && info_element->data[1] == 0x0a &&
@@ -2142,13 +2134,11 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, network->dtim_data =RTLLIB_DTIM_VALID ; -if (info_element->data[2 ] &1 ) network->dtim_data |=RTLLIB_DTIM_MBCAST ; offset = (info_element->data[2 ] >>1 )*2 ; -if (ieee->assoc_id <8 *offset || ieee->assoc_id >8 *(offset + info_element->len -3 ))break ;
@@ -2203,7 +2193,6 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, &tmp_htcap_len);break ; -case MFIE_TYPE_HT_INFO :netdev_dbg (ieee->dev,"MFIE_TYPE_HT_INFO: %d bytes\n" , info_element->len);
@@ -2392,7 +2381,6 @@ static inline int is_same_network(struct rtllib_network *src, (dst->capability & WLAN_CAPABILITY_ESS))); } -static inline void update_network (struct rtllib_device *ieee,struct rtllib_network *dst,struct rtllib_network *src)
@@ -2580,7 +2568,6 @@ static inline void rtllib_process_probe_response( goto free_network; } -if (!rtllib_legal_channel (ieee, network->channel)) goto free_network;
Signature · 1 line
2.34.1
Re: [PATCH v2 1/4] staging: rtl8192e: remove extra blank lines
Quoted 3 lines · Khadija Kamran
Remove extra blank lines as reported by checkpatch.pl
"CHECK: Please don't use multiple blank lines"
Commit log needs to say why you did it, why this patch need to be merged. Checkpatch itself doesn't satisfy the why requirement.
When we do these white space cleanups, the why is typically "to adhere to the Linux kernel coding-style."
If you are doing a particular checkpatch cleanup and are not sure what to write, check your predecessors.
$ git log --oneline | grep "multiple blank lines"
That'll give you many instances. Reference a few, some poor ones sneak through.
Alison
Quoted 116 lines
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192e/rtllib_rx.c | 13 ------------- 1 file changed, 13 deletions(-)drivers/staging/rtl8192e/rtllib_rx.c +0
-13@@ -154,7 +154,6 @@ rtllib_frag_cache_get(struct rtllib_device *ieee,return skb; } -/* Called only as a tasklet (software IRQ) */ static int rtllib_frag_cache_invalidate (struct rtllib_device *ieee,struct rtllib_hdr_4addr *hdr)@@ -318,7 +317,6 @@ rtllib_rx_frame_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,return res; } -/* Called only as a tasklet (software IRQ), by rtllib_rx */ static inline int rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,@@ -355,7 +353,6 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,return 0 ; } -/* this function is stolen from ipw2200 driver*/ #define IEEE_PACKET_RETRY_TIME (5*HZ) static int is_duplicate_packet(struct rtllib_device *ieee,@@ -887,7 +884,6 @@ static u8 parse_subframe(struct rtllib_device *ieee, struct sk_buff *skb,return rxb->nr_subframes; } -static size_t rtllib_rx_get_hdrlen (struct rtllib_device *ieee,struct sk_buff *skb,struct rtllib_rx_stats *rx_stats)@@ -1569,7 +1565,6 @@ static int rtllib_verify_qos_info(struct rtllib_qos_information_elementreturn 0 ; } -/* Parse a QoS parameter element */ static int rtllib_read_qos_param_element( struct rtllib_qos_parameter_info *element_param,@@ -1599,7 +1594,6 @@ static int rtllib_read_qos_info_element(return rtllib_verify_qos_info (element_info,QOS_OUI_INFO_SUB_TYPE ); } -/* Write QoS parameters from the ac parameters. */ static int rtllib_qos_convert_ac_to_parameters (struct rtllib_qos_parameter_info *param_elm,struct rtllib_qos_data *qos_data)@@ -1843,7 +1837,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, } } -if (*tmp_htinfo_len ==0 ) { if (info_element->len >= 4 && info_element->data[0] == 0x00 &&@@ -1932,7 +1925,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, info_element->data[2] == 0x96) network->cisco_cap_exist = true; - if (info_element->len >= 3 && info_element->data[0] == 0x00 && info_element->data[1] == 0x0a &&@@ -2142,13 +2134,11 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, network->dtim_data =RTLLIB_DTIM_VALID ; -if (info_element->data[2 ] &1 ) network->dtim_data |=RTLLIB_DTIM_MBCAST ; offset = (info_element->data[2 ] >>1 )*2 ; -if (ieee->assoc_id <8 *offset || ieee->assoc_id >8 *(offset + info_element->len -3 ))break ;@@ -2203,7 +2193,6 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, &tmp_htcap_len);break ; -case MFIE_TYPE_HT_INFO :netdev_dbg (ieee->dev,"MFIE_TYPE_HT_INFO: %d bytes\n" , info_element->len);@@ -2392,7 +2381,6 @@ static inline int is_same_network(struct rtllib_network *src, (dst->capability & WLAN_CAPABILITY_ESS))); } -static inline void update_network (struct rtllib_device *ieee,struct rtllib_network *dst,struct rtllib_network *src)@@ -2580,7 +2568,6 @@ static inline void rtllib_process_probe_response( goto free_network; } -if (!rtllib_legal_channel (ieee, network->channel)) goto free_network;Signature · 1 line
2.34.1
Re: [PATCH v2 1/4] staging: rtl8192e: remove extra blank lines
Quoted 8 lines · Alison Schofield
Quoted 3 lines · Khadija Kamran
Remove extra blank lines as reported by checkpatch.pl
"CHECK: Please don't use multiple blank lines"
Commit log needs to say why you did it, why this patch need to be merged. Checkpatch itself doesn't satisfy the why requirement.
Quoted 8 lines
When we do these white space cleanups, the why is typically "to adhere to the Linux kernel coding-style."
If you are doing a particular checkpatch cleanup and are not sure what to write, check your predecessors.
$ git log --oneline | grep "multiple blank lines"
Hey Alison,
I have resent the patchset with the advised changes. Thank you!
Regards,
Khadija
Quoted 121 lines
That'll give you many instances. Reference a few, some poor ones sneak through.
Alison
Quoted 116 lines
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192e/rtllib_rx.c | 13 ------------- 1 file changed, 13 deletions(-)drivers/staging/rtl8192e/rtllib_rx.c +0
-13@@ -154,7 +154,6 @@ rtllib_frag_cache_get(struct rtllib_device *ieee,return skb; } -/* Called only as a tasklet (software IRQ) */ static int rtllib_frag_cache_invalidate (struct rtllib_device *ieee,struct rtllib_hdr_4addr *hdr)@@ -318,7 +317,6 @@ rtllib_rx_frame_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,return res; } -/* Called only as a tasklet (software IRQ), by rtllib_rx */ static inline int rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,@@ -355,7 +353,6 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,return 0 ; } -/* this function is stolen from ipw2200 driver*/ #define IEEE_PACKET_RETRY_TIME (5*HZ) static int is_duplicate_packet(struct rtllib_device *ieee,@@ -887,7 +884,6 @@ static u8 parse_subframe(struct rtllib_device *ieee, struct sk_buff *skb,return rxb->nr_subframes; } -static size_t rtllib_rx_get_hdrlen (struct rtllib_device *ieee,struct sk_buff *skb,struct rtllib_rx_stats *rx_stats)@@ -1569,7 +1565,6 @@ static int rtllib_verify_qos_info(struct rtllib_qos_information_elementreturn 0 ; } -/* Parse a QoS parameter element */ static int rtllib_read_qos_param_element( struct rtllib_qos_parameter_info *element_param,@@ -1599,7 +1594,6 @@ static int rtllib_read_qos_info_element(return rtllib_verify_qos_info (element_info,QOS_OUI_INFO_SUB_TYPE ); } -/* Write QoS parameters from the ac parameters. */ static int rtllib_qos_convert_ac_to_parameters (struct rtllib_qos_parameter_info *param_elm,struct rtllib_qos_data *qos_data)@@ -1843,7 +1837,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, } } -if (*tmp_htinfo_len ==0 ) { if (info_element->len >= 4 && info_element->data[0] == 0x00 &&@@ -1932,7 +1925,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, info_element->data[2] == 0x96) network->cisco_cap_exist = true; - if (info_element->len >= 3 && info_element->data[0] == 0x00 && info_element->data[1] == 0x0a &&@@ -2142,13 +2134,11 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, network->dtim_data =RTLLIB_DTIM_VALID ; -if (info_element->data[2 ] &1 ) network->dtim_data |=RTLLIB_DTIM_MBCAST ; offset = (info_element->data[2 ] >>1 )*2 ; -if (ieee->assoc_id <8 *offset || ieee->assoc_id >8 *(offset + info_element->len -3 ))break ;@@ -2203,7 +2193,6 @@ int rtllib_parse_info_param(struct rtllib_device *ieee, &tmp_htcap_len);break ; -case MFIE_TYPE_HT_INFO :netdev_dbg (ieee->dev,"MFIE_TYPE_HT_INFO: %d bytes\n" , info_element->len);@@ -2392,7 +2381,6 @@ static inline int is_same_network(struct rtllib_network *src, (dst->capability & WLAN_CAPABILITY_ESS))); } -static inline void update_network (struct rtllib_device *ieee,struct rtllib_network *dst,struct rtllib_network *src)@@ -2580,7 +2568,6 @@ static inline void rtllib_process_probe_response( goto free_network; } -if (!rtllib_legal_channel (ieee, network->channel)) goto free_network;Signature · 1 line
2.34.1
PATCH v2 2/4 staging: rtl8192e: add blank lines after declarations
In reply to Khadija KamranAdd blank lines after declarations as reported by checkpatch.pl
"CHECK: Please use a blank line after function/struct/union/enum declarations"
--- drivers/staging/rtl8192e/rtllib_rx.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/staging/rtl8192e/rtllib_rx.c +2 -0
@@ -231,10 +231,12 @@ rtllib_rx_frame_mgmt(struct rtllib_device *ieee, struct sk_buff *skb,static unsigned char rfc1042_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0x00 }; +/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ static unsigned char bridge_tunnel_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0xf8 }; +/* No encapsulation header if EtherType < 0x600 (=length) */ /* Called by rtllib_rx_frame_decrypt */
Signature · 1 line
2.34.1
PATCH v2 3/4 staging: rtl8192e: add spaces around binary operators
In reply to Khadija KamranUse spaces around binary operators as suggested by Linux kernel coding style.
Issues reported by checkpatch.pl for the following binary operators:
+ , - , * , | , <<
--- drivers/staging/rtl8192e/rtllib_rx.c | 54 ++++++++++++++-------------- 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/staging/rtl8192e/rtllib_rx.c +27 -27
@@ -356,7 +356,7 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb, }/* this function is stolen from ipw2200 driver*/ -#define IEEE_PACKET_RETRY_TIME (5*HZ) +#define IEEE_PACKET_RETRY_TIME (5 * HZ)static int is_duplicate_packet (struct rtllib_device *ieee,struct rtllib_hdr_4addr *header) {
@@ -936,7 +936,7 @@ static int rtllib_rx_check_duplicate(struct rtllib_device *ieee,if (GetTs (ieee, (struct ts_common_info **)&pRxTS, hdr->addr2, (u8 )Frame_QoSTID ((u8 *)(skb->data)),RX_DIR , true)) { -if ((fc & (1 <<11 )) && (frag == pRxTS->rx_last_frag_num) && +if ((fc & (1 <<11 )) && (frag == pRxTS->rx_last_frag_num) && (WLAN_GET_SEQ_SEQ (sc) == pRxTS->rx_last_seq_num))return -1 ; pRxTS->rx_last_frag_num = frag;
@@ -1619,23 +1619,23 @@ static int rtllib_qos_convert_ac_to_parameters(struct rtllib_qos_parameter_infocase 1 :/* BIT(0) | BIT(3) */ if (acm) - qos_data->wmm_acm |= (0x01 <<0 )|(0x01 <<3 ); + qos_data->wmm_acm |= (0x01 <<0 ) | (0x01 <<3 );break ;case 2 :/* BIT(4) | BIT(5) */ if (acm) - qos_data->wmm_acm |= (0x01 <<4 )|(0x01 <<5 ); + qos_data->wmm_acm |= (0x01 <<4 ) | (0x01 <<5 );break ;case 3 :/* BIT(6) | BIT(7) */ if (acm) - qos_data->wmm_acm |= (0x01 <<6 )|(0x01 <<7 ); + qos_data->wmm_acm |= (0x01 <<6 ) | (0x01 <<7 );break ;case 0 :default :/* BIT(1) | BIT(2) */ if (acm) - qos_data->wmm_acm |= (0x01 <<1 )|(0x01 <<2 ); + qos_data->wmm_acm |= (0x01 <<1 ) | (0x01 <<2 );break ; }
@@ -1979,7 +1979,7 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, info_element->data[3] == 0x04) {netdev_dbg (ieee->dev,"MFIE_TYPE_WZC: %d bytes\n" , info_element->len); - network->wzc_ie_len =min (info_element->len+2 ,MAX_WZC_IE_LEN ); + network->wzc_ie_len =min (info_element->len +2 ,MAX_WZC_IE_LEN );memcpy (network->wzc_ie, info_element, network->wzc_ie_len); } }
@@ -2139,10 +2139,10 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,if (info_element->data[2 ] &1 ) network->dtim_data |=RTLLIB_DTIM_MBCAST ; - offset = (info_element->data[2 ] >>1 )*2 ; + offset = (info_element->data[2 ] >>1 ) *2 ; -if (ieee->assoc_id <8 *offset || - ieee->assoc_id >8 *(offset + info_element->len -3 )) +if (ieee->assoc_id <8 * offset || + ieee->assoc_id >8 * (offset + info_element->len -3 ))break ; offset = (ieee->assoc_id /8 ) - offset;
@@ -2357,7 +2357,7 @@ static inline int rtllib_network_init(if (rtllib_is_empty_essid (network->ssid, network->ssid_len)) network->flags |=NETWORK_EMPTY_ESSID ; stats->signal =30 + (stats->SignalStrength *70 ) /100 ; - stats->noise =rtllib_translate_todbm ((u8)(100 -stats->signal)) -25 ; + stats->noise =rtllib_translate_todbm ((u8)(100 - stats->signal)) -25 ;memcpy (&network->stats, stats,sizeof (network->stats));
@@ -2545,22 +2545,22 @@ static inline void rtllib_process_probe_response("'%s' ( %pM ): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n" ,escape_essid (info_element->data, info_element->len), beacon->header.addr3, - (le16_to_cpu (beacon->capability) & (1 <<0xf )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0xe )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0xd )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0xc )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0xb )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0xa )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x9 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x8 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x7 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x6 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x5 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x4 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x3 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x2 )) ?'1' :'0' , - (le16_to_cpu (beacon->capability) & (1 <<0x1 )) ?'1' :'0' , - (le16_to_cpu(beacon->capability) & (1<<0x0)) ? '1' : '0'); + (le16_to_cpu (beacon->capability) & (1 <<0xf )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0xe )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0xd )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0xc )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0xb )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0xa )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x9 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x8 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x7 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x6 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x5 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x4 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x3 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x2 )) ?'1' :'0' , + (le16_to_cpu (beacon->capability) & (1 <<0x1 )) ?'1' :'0' , + (le16_to_cpu(beacon->capability) & (1 << 0x0)) ? '1' : '0');if (rtllib_network_init (ieee, beacon, network, stats)) { netdev_dbg(ieee->dev, "Dropped '%s' ( %pM) via %s.\n",
Signature · 1 line
2.34.1
PATCH v2 4/4 staging: rtl8192e: remove blank lines after '{'
In reply to Khadija KamranRemove unnecessary blank lines after an open brace as reported by checkpatch.pl
"CHECK: Blank lines aren't necessary after an open brace '{'"
--- drivers/staging/rtl8192e/rtllib_rx.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/staging/rtl8192e/rtllib_rx.c +0 -4
@@ -1167,7 +1167,6 @@ static int rtllib_rx_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,if (crypt && !(fc &RTLLIB_FCTL_WEP ) && !ieee->open_wep) {if (/*ieee->ieee802_1x &&*/ rtllib_is_eapol_frame (ieee, skb, hdrlen)) { -/* pass unencrypted EAPOL frames even if encryption is * configured */
@@ -1207,7 +1206,6 @@ static void rtllib_rx_check_leave_lps(struct rtllib_device *ieee, u8 unicast, u8 nr_subframes) {if (unicast) { -if (ieee->state ==RTLLIB_LINKED ) { if (((ieee->link_detect_info.NumRxUnicastOkInPeriod + ieee->link_detect_info.NumTxOkInPeriod) > 8) ||
@@ -1552,7 +1550,6 @@ static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };static int rtllib_verify_qos_info (struct rtllib_qos_information_element *info_element,int sub_type) { -if (info_element->elementID !=QOS_ELEMENT_ID )return -1 ;if (info_element->qui_subtype != sub_type)
@@ -2696,7 +2693,6 @@ static void rtllib_rx_mgt(struct rtllib_device *ieee, ieee->last_rx_ps_time = jiffies;switch (WLAN_FC_GET_STYPE (le16_to_cpu (header->frame_ctl))) { -case RTLLIB_STYPE_BEACON :netdev_dbg (ieee->dev,"received BEACON (%d)\n" ,WLAN_FC_GET_STYPE (le16_to_cpu (header->frame_ctl)));
Signature · 1 line
2.34.1
Quoted 6 lines · Khadija Kamran
Fix several cleanup issues reported by checkpatch.pl in module staging/rtl8192e in file
rtllib_rx.cChanges in v2:
- Resent patchset with the correct email address
Quoted 9 lines
Khadija Kamran (4):
staging: rtl8192e: remove extra blank lines
staging: rtl8192e: add blank lines after declarations
staging: rtl8192e: add spaces around binary operators
staging: rtl8192e: remove blank lines after '{'drivers/staging/rtl8192e/rtllib_rx.c | 73 +++++++++++----------------- 1 file changed, 29 insertions(+), 44 deletions(-)