Skip to contentSkip to conversation

i3c: dw: minor changes

PATCH Applied Jeremy Kerr 2 participants 4 messages Mar 30, 2023 – Apr 27, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover i3c: dw: minor changes

This series contains a minor fix for the dw driver, and a small cleanup
+ comment.

Jeremy Kerr (1):
i3c: dw: use bus mode rather than device reg for conditional tCAS
setting

Matt Johnston (1):
i3c: dw: Return the length from a read priv_xfer

 drivers/i3c/master/dw-i3c-master.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
Signature · 7 lines
2.39.2


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
#1 lore raw

PATCH 1/2 i3c: dw: Return the length from a read priv_xfer

From: Matt Johnston <[email protected]>

We currently assume that the rx_len of a read command will be as submitted, but we may have a shorter read than expected.

This change populates the output i3c xfer length from the actually-read length.

---
 drivers/i3c/master/dw-i3c-master.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/i3c/master/dw-i3c-master.c +7 -0
index 48954d3e6571..97a5442b1ad8 100644
@@ -887,6 +887,13 @@ static int dw_i3c_master_priv_xfers(struct i3c_dev_desc *dev,
 	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT))
 		dw_i3c_master_dequeue_xfer(master, xfer);
 
+	for (i = 0; i < i3c_nxfers; i++) {
+		struct dw_i3c_cmd *cmd = &xfer->cmds[i];
+
+		if (i3c_xfers[i].rnw)
+			i3c_xfers[i].len = cmd->rx_len;
+	}
+
 	ret = xfer->ret;
 	dw_i3c_master_free_xfer(xfer);
 
Signature · 7 lines
2.39.2


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
#2 lore raw

PATCH 2/2 i3c: dw: use bus mode rather than device reg for conditional tCAS setting

In reply to Jeremy Kerr

In the clock setup path, we set the hardware DEV_CTRL_I2C_SLAVE_PRESENT bit on a shared mode bus, then read-back this bit for the conditional tCAS set.

Instead, just use the bus->mode setting for the conditional test.

While we're at it, add a little comment about why the conditional is there.

---
 drivers/i3c/master/dw-i3c-master.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/i3c/master/dw-i3c-master.c +5 -1
index 97a5442b1ad8..1c146a39e1bd 100644
@@ -538,7 +538,11 @@ static int dw_i3c_clk_cfg(struct dw_i3c_master *master)
 	scl_timing = SCL_I3C_TIMING_HCNT(hcnt) | SCL_I3C_TIMING_LCNT(lcnt);
 	writel(scl_timing, master->regs + SCL_I3C_PP_TIMING);
 
-	if (!(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_I2C_SLAVE_PRESENT))
+	/*
+	 * In pure i3c mode, MST_FREE represents tCAS. In shared mode, this
+	 * will be set up by dw_i2c_clk_cfg as tLOW.
+	 */
+	if (master->base.bus.mode == I3C_BUS_MODE_PURE)
 		writel(BUS_I3C_MST_FREE(lcnt), master->regs + BUS_FREE_TIMING);
 
 	lcnt = max_t(u8,
Signature · 7 lines
2.39.2


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
maintainer Applied
#3 lore raw
In reply to Jeremy Kerr
Quoted 8 lines · Jeremy Kerr

This series contains a minor fix for the dw driver, and a small cleanup
+ comment.

Jeremy Kerr (1):
i3c: dw: use bus mode rather than device reg for conditional tCAS
setting

[...]

Applied, thanks!

[1/2] i3c: dw: Return the length from a read priv_xfer

      commit: 67df5ce9dd8870d3e53de5ebd6aecf609b713044
[2/2] i3c: dw: use bus mode rather than device reg for conditional tCAS setting
      commit: 66b32e3d2c6daeeafb80fa41f3a41e4c0ab85cc6
Signature · 8 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c