Skip to contentSkip to conversation

add rpc_status handler in nfsd debug filesystem

PATCH Superseded Lorenzo Bianconi 6 participants 14 messages Jul 28, 2023 – Aug 4, 2023

Subsystems (3)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover add rpc_status handler in nfsd debug filesystem

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

Changes since v3:
- introduce rq_status_counter in order to detect if the RPC request is pending and RPC info are stable
- rely on __svc_print_addr to dump IP info

Changes since v2:
- minor changes in nfsd_rpc_status_show output

Changes since v1:
- rework nfsd_rpc_status_show output

Changes since RFCv1:
- riduce time holding nfsd_mutex bumping svc_serv refcoung in nfsd_rpc_status_open()
- dump rqstp->rq_stime
- add missing kdoc for nfsd_rpc_status_open()

Lorenzo Bianconi (2):
SUNRPC: add verbose parameter to __svc_print_addr()
NFSD: add rpc_status entry in nfsd debug filesystem

 fs/nfsd/nfs4proc.c              |   4 +-
 fs/nfsd/nfsctl.c                |  10 +++
 fs/nfsd/nfsd.h                  |   2 +
 fs/nfsd/nfssvc.c                | 122 ++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h      |   1 +
 include/linux/sunrpc/svc_xprt.h |  12 ++--
 net/sunrpc/svc.c                |   2 +-
 net/sunrpc/svc_xprt.c           |   2 +-
 8 files changed, 144 insertions(+), 11 deletions(-)
Signature · 1 line
2.41.0
#1 lore raw

PATCH v4 1/2 SUNRPC: add verbose parameter to __svc_print_addr()

Introduce verbose parameter to utility routine in order to reduce output verbosity. This is a preliminary patch to add rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 include/linux/sunrpc/svc_xprt.h | 12 ++++++------
 net/sunrpc/svc_xprt.c           |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
include/linux/sunrpc/svc_xprt.h +6 -6
index a6b12631db21..1715d4c6bd6b 100644
@@ -209,21 +209,21 @@ static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
 }
 
 static inline char *__svc_print_addr(const struct sockaddr *addr,
-				     char *buf, const size_t len)
+				     char *buf, const size_t len,
+				     bool verbose)
 {
 	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
 	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
 
 	switch (addr->sa_family) {
 	case AF_INET:
-		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
-			ntohs(sin->sin_port));
+		snprintf(buf, len, "%pI4, %s%u", &sin->sin_addr,
+			 verbose ? "port=" : "", ntohs(sin->sin_port));
 		break;
 
 	case AF_INET6:
-		snprintf(buf, len, "%pI6, port=%u",
-			 &sin6->sin6_addr,
-			ntohs(sin6->sin6_port));
+		snprintf(buf, len, "%pI6, %s%u", &sin6->sin6_addr,
+			 verbose ? "port=" : "", ntohs(sin6->sin6_port));
 		break;
 
 	default:
net/sunrpc/svc_xprt.c +1 -1
index 62c7919ea610..16b794d291a4 100644
@@ -386,7 +386,7 @@ EXPORT_SYMBOL_GPL(svc_xprt_copy_addrs);
  */
 char *svc_print_addr(struct svc_rqst *rqstp, char *buf, size_t len)
 {
-	return __svc_print_addr(svc_addr(rqstp), buf, len);
+	return __svc_print_addr(svc_addr(rqstp), buf, len, true);
 }
 EXPORT_SYMBOL_GPL(svc_print_addr);
 
Signature · 1 line
2.41.0
#2 lore raw

Re: [PATCH v4 1/2] SUNRPC: add verbose parameter to __svc_print_addr()

Quoted 22 lines · Lorenzo Bianconi

Introduce verbose parameter to utility routine in order to reduce output verbosity. This is a preliminary patch to add rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 include/linux/sunrpc/svc_xprt.h | 12 ++++++------
 net/sunrpc/svc_xprt.c           |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
include/linux/sunrpc/svc_xprt.h +2 -1
index a6b12631db21..1715d4c6bd6b 100644
@@ -209,21 +209,21 @@ static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
 }
 
 static inline char *__svc_print_addr(const struct sockaddr *addr,
-				     char *buf, const size_t len)
+				     char *buf, const size_t len,
+				     bool verbose)

include/linux/sunrpc/svc_xprt.h static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt) · line 221

Quoted 10 lines
include/linux/sunrpc/svc_xprt.h +2 -2
 {
 	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
 	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
 
 	switch (addr->sa_family) {
 	case AF_INET:
-		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
-			ntohs(sin->sin_port));
+		snprintf(buf, len, "%pI4, %s%u", &sin->sin_addr,
+			 verbose ? "port=" : "", ntohs(sin->sin_port));

I would move the "," into the verbose part too.
so
verbose ? ", port=" : " "

Other than that, I like this approach.

NeilBrown

Quoted 28 lines
include/linux/sunrpc/svc_xprt.h +2 -3
 		break;
 
 	case AF_INET6:
-		snprintf(buf, len, "%pI6, port=%u",
-			 &sin6->sin6_addr,
-			ntohs(sin6->sin6_port));
+		snprintf(buf, len, "%pI6, %s%u", &sin6->sin6_addr,
+			 verbose ? "port=" : "", ntohs(sin6->sin6_port));
 		break;
 
 	default:
net/sunrpc/svc_xprt.c +1 -1
index 62c7919ea610..16b794d291a4 100644
@@ -386,7 +386,7 @@ EXPORT_SYMBOL_GPL(svc_xprt_copy_addrs);
  */
 char *svc_print_addr(struct svc_rqst *rqstp, char *buf, size_t len)
 {
-	return __svc_print_addr(svc_addr(rqstp), buf, len);
+	return __svc_print_addr(svc_addr(rqstp), buf, len, true);
 }
 EXPORT_SYMBOL_GPL(svc_print_addr);
 
Signature · 1 line
2.41.0
maintainer
#3 lore raw

Re: [PATCH v4 1/2] SUNRPC: add verbose parameter to __svc_print_addr()

Quoted 38 lines · NeilBrown
Quoted 22 lines · Lorenzo Bianconi

Introduce verbose parameter to utility routine in order to reduce output verbosity. This is a preliminary patch to add rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 include/linux/sunrpc/svc_xprt.h | 12 ++++++------
 net/sunrpc/svc_xprt.c           |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
include/linux/sunrpc/svc_xprt.h +2 -1
index a6b12631db21..1715d4c6bd6b 100644
@@ -209,21 +209,21 @@ static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
 }
 
 static inline char *__svc_print_addr(const struct sockaddr *addr,
-				     char *buf, const size_t len)
+				     char *buf, const size_t len,
+				     bool verbose)

include/linux/sunrpc/svc_xprt.h static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt) · line 221

Quoted 10 lines
include/linux/sunrpc/svc_xprt.h +2 -2
 {
 	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
 	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
 
 	switch (addr->sa_family) {
 	case AF_INET:
-		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
-			ntohs(sin->sin_port));
+		snprintf(buf, len, "%pI4, %s%u", &sin->sin_addr,
+			 verbose ? "port=" : "", ntohs(sin->sin_port));

I would move the "," into the verbose part too.
so
verbose ? ", port=" : " "

Quoted 2 lines

Other than that, I like this approach.

If we're separating fields in the main seqfile by ' ', then we probably want to use a different delimiter here in the !verbose case. Maybe ':' or ',' instead?

Also, ntohs is going to return a short, so the format should probably be using "%hu" for the port.

Quoted 30 lines
Quoted 29 lines
include/linux/sunrpc/svc_xprt.h +2 -3
 		break;
 
 	case AF_INET6:
-		snprintf(buf, len, "%pI6, port=%u",
-			 &sin6->sin6_addr,
-			ntohs(sin6->sin6_port));
+		snprintf(buf, len, "%pI6, %s%u", &sin6->sin6_addr,
+			 verbose ? "port=" : "", ntohs(sin6->sin6_port));
 		break;
 
 	default:
net/sunrpc/svc_xprt.c +1 -1
index 62c7919ea610..16b794d291a4 100644
@@ -386,7 +386,7 @@ EXPORT_SYMBOL_GPL(svc_xprt_copy_addrs);
  */
 char *svc_print_addr(struct svc_rqst *rqstp, char *buf, size_t len)
 {
-	return __svc_print_addr(svc_addr(rqstp), buf, len);
+	return __svc_print_addr(svc_addr(rqstp), buf, len, true);
 }
 EXPORT_SYMBOL_GPL(svc_print_addr);
 
Signature · 1 line
2.41.0
Signature · 1 line
Jeff Layton <[email protected]>
#4 lore raw

Re: [PATCH v4 1/2] SUNRPC: add verbose parameter to __svc_print_addr()

Quoted 39 lines · Jeff Layton
Quoted 38 lines · NeilBrown
Quoted 22 lines · Lorenzo Bianconi

Introduce verbose parameter to utility routine in order to reduce output verbosity. This is a preliminary patch to add rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 include/linux/sunrpc/svc_xprt.h | 12 ++++++------
 net/sunrpc/svc_xprt.c           |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
include/linux/sunrpc/svc_xprt.h +2 -1
index a6b12631db21..1715d4c6bd6b 100644
@@ -209,21 +209,21 @@ static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
 }
 
 static inline char *__svc_print_addr(const struct sockaddr *addr,
-				     char *buf, const size_t len)
+				     char *buf, const size_t len,
+				     bool verbose)

include/linux/sunrpc/svc_xprt.h static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt) · line 221

Quoted 10 lines
include/linux/sunrpc/svc_xprt.h +2 -2
 {
 	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
 	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
 
 	switch (addr->sa_family) {
 	case AF_INET:
-		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
-			ntohs(sin->sin_port));
+		snprintf(buf, len, "%pI4, %s%u", &sin->sin_addr,
+			 verbose ? "port=" : "", ntohs(sin->sin_port));

I would move the "," into the verbose part too.
so
verbose ? ", port=" : " "

Quoted 6 lines
Quoted 2 lines

Other than that, I like this approach.

If we're separating fields in the main seqfile by ' ', then we probably want to use a different delimiter here in the !verbose case. Maybe ':' or ',' instead?

Aren't the address and the port two different fields? Colon is normal for separating host and port, but as IPv6 addresses contain colons, you would need [IP::V6]:port which is probably isn't really an improvement.
I would leave address and port as separate fields.

Quoted 3 lines

Also, ntohs is going to return a short, so the format should probably be using "%hu" for the port.

Probably.

Thanks,
NeilBrown

Quoted 35 lines
Quoted 31 lines
Quoted 30 lines
include/linux/sunrpc/svc_xprt.h +2 -3
 		break;
 
 	case AF_INET6:
-		snprintf(buf, len, "%pI6, port=%u",
-			 &sin6->sin6_addr,
-			ntohs(sin6->sin6_port));
+		snprintf(buf, len, "%pI6, %s%u", &sin6->sin6_addr,
+			 verbose ? "port=" : "", ntohs(sin6->sin6_port));
 		break;
 
 	default:
net/sunrpc/svc_xprt.c +1 -1
index 62c7919ea610..16b794d291a4 100644
@@ -386,7 +386,7 @@ EXPORT_SYMBOL_GPL(svc_xprt_copy_addrs);
  */
 char *svc_print_addr(struct svc_rqst *rqstp, char *buf, size_t len)
 {
-	return __svc_print_addr(svc_addr(rqstp), buf, len);
+	return __svc_print_addr(svc_addr(rqstp), buf, len, true);
 }
 EXPORT_SYMBOL_GPL(svc_print_addr);
 
Signature · 1 line
2.41.0
Signature · 1 line
Jeff Layton <[email protected]>
#5 lore raw

PATCH v4 2/2 NFSD: add rpc_status entry in nfsd debug filesystem

In reply to Lorenzo Bianconi

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 fs/nfsd/nfs4proc.c         |   4 +-
 fs/nfsd/nfsctl.c           |  10 +++
 fs/nfsd/nfsd.h             |   2 +
 fs/nfsd/nfssvc.c           | 122 +++++++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h |   1 +
 net/sunrpc/svc.c           |   2 +-
 6 files changed, 137 insertions(+), 4 deletions(-)
fs/nfsd/nfs4proc.c +1 -3
index f0f318e78630..b7ad3081bc36 100644
@@ -2497,8 +2497,6 @@ static inline void nfsd4_increment_op_stats(u32 opnum)
 
 static const struct nfsd4_operation nfsd4_ops[];
 
-static const char *nfsd4_op_name(unsigned opnum);
-
 /*
  * Enforce NFSv4.1 COMPOUND ordering rules:
  *
@@ -3628,7 +3626,7 @@ void warn_on_nonidempotent_op(struct nfsd4_op *op)
 	}
 }
 
-static const char *nfsd4_op_name(unsigned opnum)
+const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
fs/nfsd/nfsctl.c +10 -0
index 35d2e2cde1eb..f2e4f4b1e4d1 100644
@@ -57,6 +57,8 @@ enum {
 	NFSD_RecoveryDir,
 	NFSD_V4EndGrace,
 #endif
+	NFSD_Rpc_Status,
+
 	NFSD_MaxReserved
 };
 
@@ -195,6 +197,13 @@ static inline struct net *netns(struct file *file)
 	return file_inode(file)->i_sb->s_fs_info;
 }
 
+static const struct file_operations nfsd_rpc_status_operations = {
+	.open		= nfsd_rpc_status_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= nfsd_pool_stats_release,
+};
+
 /*
  * write_unlock_ip - Release all locks used by a client
  *
@@ -1400,6 +1409,7 @@ static int nfsd_fill_super(struct super_block *sb, struct fs_context *fc)
 		[NFSD_RecoveryDir] = {"nfsv4recoverydir", &transaction_ops, S_IWUSR|S_IRUSR},
 		[NFSD_V4EndGrace] = {"v4_end_grace", &transaction_ops, S_IWUSR|S_IRUGO},
 #endif
+		[NFSD_Rpc_Status] = {"rpc_status", &nfsd_rpc_status_operations, S_IRUGO},
 		/* last one */ {""}
 	};
 
fs/nfsd/nfsd.h +2 -0
index d88498f8b275..75a3e1d55bc8 100644
@@ -94,6 +94,7 @@ int		nfsd_get_nrthreads(int n, int *, struct net *);
 int		nfsd_set_nrthreads(int n, int *, struct net *);
 int		nfsd_pool_stats_open(struct inode *, struct file *);
 int		nfsd_pool_stats_release(struct inode *, struct file *);
+int		nfsd_rpc_status_open(struct inode *inode, struct file *file);
 void		nfsd_shutdown_threads(struct net *net);
 
 void		nfsd_put(struct net *net);
@@ -506,6 +507,7 @@ extern void nfsd4_ssc_init_umount_work(struct nfsd_net *nn);
 
 extern void nfsd4_init_leases_net(struct nfsd_net *nn);
 
+const char *nfsd4_op_name(unsigned opnum);
 #else /* CONFIG_NFSD_V4 */
 static inline int nfsd4_is_junction(struct dentry *dentry)
 {
fs/nfsd/nfssvc.c +122 -0

137 lines not on this page · raw message

include/linux/sunrpc/svc.h +1 -0
index fe1394cc1371..cb516da9e270 100644
@@ -270,6 +270,7 @@ struct svc_rqst {
 						 * net namespace
 						 */
 	void **			rq_lease_breaker; /* The v4 client breaking a lease */
+	atomic_t		rq_status_counter; /* RPC processing counter */
 };
 
 #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
net/sunrpc/svc.c +1 -1
index 587811a002c9..44eac83b35a1 100644
@@ -1629,7 +1629,7 @@ const char *svc_proc_name(const struct svc_rqst *rqstp)
 		return rqstp->rq_procinfo->pc_name;
 	return "unknown";
 }
-
+EXPORT_SYMBOL_GPL(svc_proc_name);
 
 /**
  * svc_encode_result_payload - mark a range of bytes as a result payload
Signature · 1 line
2.41.0
#6 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

Quoted 96 lines · Lorenzo Bianconi

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 fs/nfsd/nfs4proc.c         |   4 +-
 fs/nfsd/nfsctl.c           |  10 +++
 fs/nfsd/nfsd.h             |   2 +
 fs/nfsd/nfssvc.c           | 122 +++++++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h |   1 +
 net/sunrpc/svc.c           |   2 +-
 6 files changed, 137 insertions(+), 4 deletions(-)
fs/nfsd/nfs4proc.c +1 -3
index f0f318e78630..b7ad3081bc36 100644
@@ -2497,8 +2497,6 @@ static inline void nfsd4_increment_op_stats(u32 opnum)
 
 static const struct nfsd4_operation nfsd4_ops[];
 
-static const char *nfsd4_op_name(unsigned opnum);
-
 /*
  * Enforce NFSv4.1 COMPOUND ordering rules:
  *
@@ -3628,7 +3626,7 @@ void warn_on_nonidempotent_op(struct nfsd4_op *op)
 	}
 }
 
-static const char *nfsd4_op_name(unsigned opnum)
+const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
fs/nfsd/nfsctl.c +10 -0
index 35d2e2cde1eb..f2e4f4b1e4d1 100644
@@ -57,6 +57,8 @@ enum {
 	NFSD_RecoveryDir,
 	NFSD_V4EndGrace,
 #endif
+	NFSD_Rpc_Status,
+
 	NFSD_MaxReserved
 };
 
@@ -195,6 +197,13 @@ static inline struct net *netns(struct file *file)
 	return file_inode(file)->i_sb->s_fs_info;
 }
 
+static const struct file_operations nfsd_rpc_status_operations = {
+	.open		= nfsd_rpc_status_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= nfsd_pool_stats_release,
+};
+
 /*
  * write_unlock_ip - Release all locks used by a client
  *
@@ -1400,6 +1409,7 @@ static int nfsd_fill_super(struct super_block *sb, struct fs_context *fc)
 		[NFSD_RecoveryDir] = {"nfsv4recoverydir", &transaction_ops, S_IWUSR|S_IRUSR},
 		[NFSD_V4EndGrace] = {"v4_end_grace", &transaction_ops, S_IWUSR|S_IRUGO},
 #endif
+		[NFSD_Rpc_Status] = {"rpc_status", &nfsd_rpc_status_operations, S_IRUGO},
 		/* last one */ {""}
 	};
 
fs/nfsd/nfsd.h +2 -0
index d88498f8b275..75a3e1d55bc8 100644
@@ -94,6 +94,7 @@ int		nfsd_get_nrthreads(int n, int *, struct net *);
 int		nfsd_set_nrthreads(int n, int *, struct net *);
 int		nfsd_pool_stats_open(struct inode *, struct file *);
 int		nfsd_pool_stats_release(struct inode *, struct file *);
+int		nfsd_rpc_status_open(struct inode *inode, struct file *file);
 void		nfsd_shutdown_threads(struct net *net);
 
 void		nfsd_put(struct net *net);
@@ -506,6 +507,7 @@ extern void nfsd4_ssc_init_umount_work(struct nfsd_net *nn);
 
 extern void nfsd4_init_leases_net(struct nfsd_net *nn);
 
+const char *nfsd4_op_name(unsigned opnum);
 #else /* CONFIG_NFSD_V4 */
 static inline int nfsd4_is_junction(struct dentry *dentry)
 {
fs/nfsd/nfssvc.c +0 -0
index 97830e28c140..e9e954b5ae47 100644

fs/nfsd/nfssvc.c int nfsd_dispatch(struct svc_rqst *rqstp) · line 1061

Quoted 5 lines
fs/nfsd/nfssvc.c +2 -0
@@ -1057,6 +1057,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_decode(rqstp, &rqstp->rq_arg_stream))
 		goto out_decode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+

Does this really have to be an atomic_t ? Seems like nfsd_dispatch is the only function updating it. You might need release semantics here and acquire semantics in nfsd_rpc_status_show(). I'd rather avoid a full-on atomic op in nfsd_dispatch() unless it's absolutely needed.

Also, do you need to bump the rq_status_counter in the other RPC dispatch routines (lockd and nfs callback) too?

Quoted 50 lines
fs/nfsd/nfssvc.c +36 -0
 	rp = NULL;
 	switch (nfsd_cache_lookup(rqstp, &rp)) {
 	case RC_DOIT:
@@ -1074,6 +1076,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_encode(rqstp, &rqstp->rq_res_stream))
 		goto out_encode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1);
 out_cached_reply:
 	return 1;
@@ -1149,3 +1153,121 @@ int nfsd_pool_stats_release(struct inode *inode, struct file *file)
 	mutex_unlock(&nfsd_mutex);
 	return ret;
 }
+
+static int nfsd_rpc_status_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = file_inode(m->file);
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+	int i;
+
+	rcu_read_lock();
+
+	for (i = 0; i < nn->nfsd_serv->sv_nrpools; i++) {
+		struct svc_rqst *rqstp;
+
+		list_for_each_entry_rcu(rqstp,
+				&nn->nfsd_serv->sv_pools[i].sp_all_threads,
+				rq_all) {
+			struct nfsd_rpc_status_info {
+				struct sockaddr daddr;
+				struct sockaddr saddr;
+				unsigned long rq_flags;
+				__be32 rq_xid;
+				u32 rq_prog;
+				u32 rq_vers;
+				const char *pc_name;
+				ktime_t rq_stime;
+				u32 opnum[NFSD_MAX_OPS_PER_COMPOUND]; /* NFSv4 compund */
+			} rqstp_info;
+			unsigned int status_counter;
+			char buf[RPC_MAX_ADDRBUFLEN];
+			int j, opcnt = 0;
+
+			if (!test_bit(RQ_BUSY, &rqstp->rq_flags))
+				continue;
+
+			status_counter = atomic_read(&rqstp->rq_status_counter);
Quoted 7 lines · Neil

I suggest you add add a counter to the rqstp which is incremented from even to odd after parsing a request - including he v4 parsing needed to have a sable ->opcnt - and then incremented from odd to even when the request is complete.
Then this code samples the counter, skips the rqst if the counter is even, and resamples the counter after collecting the data. If it has changed, the drop the record.

I don't see a check if the status counter is even.

Also, as above, I'm not sure atomic_read() is necessary here. Maybe just READ_ONCE() ? Neil, any thoughts?

Quoted 54 lines
fs/nfsd/nfssvc.c +54 -0
+
+			rqstp_info.rq_xid = rqstp->rq_xid;
+			rqstp_info.rq_flags = rqstp->rq_flags;
+			rqstp_info.rq_prog = rqstp->rq_prog;
+			rqstp_info.rq_vers = rqstp->rq_vers;
+			rqstp_info.pc_name = svc_proc_name(rqstp);
+			rqstp_info.rq_stime = rqstp->rq_stime;
+			memcpy(&rqstp_info.daddr, svc_daddr(rqstp),
+			       sizeof(struct sockaddr));
+			memcpy(&rqstp_info.saddr, svc_addr(rqstp),
+			       sizeof(struct sockaddr));
+
+#ifdef CONFIG_NFSD_V4
+			if (rqstp->rq_vers == NFS4_VERSION &&
+			    rqstp->rq_proc == NFSPROC4_COMPOUND) {
+				/* NFSv4 compund */
+				struct nfsd4_compoundargs *args = rqstp->rq_argp;
+
+				opcnt = args->opcnt;
+				for (j = 0; j < opcnt; j++) {
+					struct nfsd4_op *op = &args->ops[j];
+
+					rqstp_info.opnum[j] = op->opnum;
+				}
+			}
+#endif /* CONFIG_NFSD_V4 */
+
+			/* In order to detect if the RPC request is pending and
+			 * RPC info are stable we check if rq_status_counter
+			 * has been incremented during the handler processing.
+			 */
+			if (status_counter != atomic_read(&rqstp->rq_status_counter))
+				continue;
+
+			seq_printf(m,
+				   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",
+				   be32_to_cpu(rqstp_info.rq_xid),
+				   rqstp_info.rq_flags,
+				   rqstp_info.rq_prog,
+				   rqstp_info.rq_vers,
+				   rqstp_info.pc_name,
+				   ktime_to_us(rqstp_info.rq_stime));
+
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.saddr, buf,
+						    sizeof(buf), false));
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.daddr, buf,
+						    sizeof(buf), false));
+			for (j = 0; j < opcnt; j++)
+				seq_printf(m, " %s%s",
+					   nfsd4_op_name(rqstp_info.opnum[j]),
+					   j == opcnt - 1 ? "," : "");
+			seq_puts(m, "\n");

fs/nfsd/nfssvc.c int nfsd_pool_stats_release(struct inode *inode, struct file *file) · line 1253

Quoted 10 lines
fs/nfsd/nfssvc.c +10 -0
+		}
+	}
+
+	rcu_read_unlock();
+
+	return 0;
+}
+
+/**
+ * nfsd_rpc_status_open - Atomically copy a write verifier

The kdoc comment maybe was copied, pasted, and then not updated?

Quoted 48 lines

+ * @inode: entry inode pointer.
+ * @file: entry file pointer.
+ *
+ * This routine dumps pending RPC requests info queued into nfs server.
+ */

fs/nfsd/nfssvc.c +15 -0
+int nfsd_rpc_status_open(struct inode *inode, struct file *file)
+{
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+
+	mutex_lock(&nfsd_mutex);
+	if (!nn->nfsd_serv) {
+		mutex_unlock(&nfsd_mutex);
+		return -ENODEV;
+	}
+
+	svc_get(nn->nfsd_serv);
+	mutex_unlock(&nfsd_mutex);
+
+	return single_open(file, nfsd_rpc_status_show, inode->i_private);
+}
include/linux/sunrpc/svc.h +1 -0
index fe1394cc1371..cb516da9e270 100644
@@ -270,6 +270,7 @@ struct svc_rqst {
 						 * net namespace
 						 */
 	void **			rq_lease_breaker; /* The v4 client breaking a lease */
+	atomic_t		rq_status_counter; /* RPC processing counter */
 };
 
 #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
net/sunrpc/svc.c +1 -1
index 587811a002c9..44eac83b35a1 100644
@@ -1629,7 +1629,7 @@ const char *svc_proc_name(const struct svc_rqst *rqstp)
 		return rqstp->rq_procinfo->pc_name;
 	return "unknown";
 }
-
+EXPORT_SYMBOL_GPL(svc_proc_name);
 
 /**
  * svc_encode_result_payload - mark a range of bytes as a result payload
Signature · 1 line
2.41.0
Signature · 1 line
Chuck Lever
#7 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

Quoted 174 lines · Chuck Lever
Quoted 96 lines · Lorenzo Bianconi

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 fs/nfsd/nfs4proc.c         |   4 +-
 fs/nfsd/nfsctl.c           |  10 +++
 fs/nfsd/nfsd.h             |   2 +
 fs/nfsd/nfssvc.c           | 122 +++++++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h |   1 +
 net/sunrpc/svc.c           |   2 +-
 6 files changed, 137 insertions(+), 4 deletions(-)
fs/nfsd/nfs4proc.c +1 -3
index f0f318e78630..b7ad3081bc36 100644
@@ -2497,8 +2497,6 @@ static inline void nfsd4_increment_op_stats(u32 opnum)
 
 static const struct nfsd4_operation nfsd4_ops[];
 
-static const char *nfsd4_op_name(unsigned opnum);
-
 /*
  * Enforce NFSv4.1 COMPOUND ordering rules:
  *
@@ -3628,7 +3626,7 @@ void warn_on_nonidempotent_op(struct nfsd4_op *op)
 	}
 }
 
-static const char *nfsd4_op_name(unsigned opnum)
+const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
fs/nfsd/nfsctl.c +10 -0
index 35d2e2cde1eb..f2e4f4b1e4d1 100644
@@ -57,6 +57,8 @@ enum {
 	NFSD_RecoveryDir,
 	NFSD_V4EndGrace,
 #endif
+	NFSD_Rpc_Status,
+
 	NFSD_MaxReserved
 };
 
@@ -195,6 +197,13 @@ static inline struct net *netns(struct file *file)
 	return file_inode(file)->i_sb->s_fs_info;
 }
 
+static const struct file_operations nfsd_rpc_status_operations = {
+	.open		= nfsd_rpc_status_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= nfsd_pool_stats_release,
+};
+
 /*
  * write_unlock_ip - Release all locks used by a client
  *
@@ -1400,6 +1409,7 @@ static int nfsd_fill_super(struct super_block *sb, struct fs_context *fc)
 		[NFSD_RecoveryDir] = {"nfsv4recoverydir", &transaction_ops, S_IWUSR|S_IRUSR},
 		[NFSD_V4EndGrace] = {"v4_end_grace", &transaction_ops, S_IWUSR|S_IRUGO},
 #endif
+		[NFSD_Rpc_Status] = {"rpc_status", &nfsd_rpc_status_operations, S_IRUGO},
 		/* last one */ {""}
 	};
 
fs/nfsd/nfsd.h +2 -0
index d88498f8b275..75a3e1d55bc8 100644
@@ -94,6 +94,7 @@ int		nfsd_get_nrthreads(int n, int *, struct net *);
 int		nfsd_set_nrthreads(int n, int *, struct net *);
 int		nfsd_pool_stats_open(struct inode *, struct file *);
 int		nfsd_pool_stats_release(struct inode *, struct file *);
+int		nfsd_rpc_status_open(struct inode *inode, struct file *file);
 void		nfsd_shutdown_threads(struct net *net);
 
 void		nfsd_put(struct net *net);
@@ -506,6 +507,7 @@ extern void nfsd4_ssc_init_umount_work(struct nfsd_net *nn);
 
 extern void nfsd4_init_leases_net(struct nfsd_net *nn);
 
+const char *nfsd4_op_name(unsigned opnum);
 #else /* CONFIG_NFSD_V4 */
 static inline int nfsd4_is_junction(struct dentry *dentry)
 {
fs/nfsd/nfssvc.c +0 -0
index 97830e28c140..e9e954b5ae47 100644

fs/nfsd/nfssvc.c int nfsd_dispatch(struct svc_rqst *rqstp) · line 1061

Quoted 5 lines
fs/nfsd/nfssvc.c +2 -0
@@ -1057,6 +1057,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_decode(rqstp, &rqstp->rq_arg_stream))
 		goto out_decode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+

Does this really have to be an atomic_t ? Seems like nfsd_dispatch is the only function updating it. You might need release semantics here and acquire semantics in nfsd_rpc_status_show(). I'd rather avoid a full-on atomic op in nfsd_dispatch() unless it's absolutely needed.

Also, do you need to bump the rq_status_counter in the other RPC dispatch routines (lockd and nfs callback) too?

Quoted 50 lines
fs/nfsd/nfssvc.c +36 -0
 	rp = NULL;
 	switch (nfsd_cache_lookup(rqstp, &rp)) {
 	case RC_DOIT:
@@ -1074,6 +1076,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_encode(rqstp, &rqstp->rq_res_stream))
 		goto out_encode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1);
 out_cached_reply:
 	return 1;
@@ -1149,3 +1153,121 @@ int nfsd_pool_stats_release(struct inode *inode, struct file *file)
 	mutex_unlock(&nfsd_mutex);
 	return ret;
 }
+
+static int nfsd_rpc_status_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = file_inode(m->file);
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+	int i;
+
+	rcu_read_lock();
+
+	for (i = 0; i < nn->nfsd_serv->sv_nrpools; i++) {
+		struct svc_rqst *rqstp;
+
+		list_for_each_entry_rcu(rqstp,
+				&nn->nfsd_serv->sv_pools[i].sp_all_threads,
+				rq_all) {
+			struct nfsd_rpc_status_info {
+				struct sockaddr daddr;
+				struct sockaddr saddr;
+				unsigned long rq_flags;
+				__be32 rq_xid;
+				u32 rq_prog;
+				u32 rq_vers;
+				const char *pc_name;
+				ktime_t rq_stime;
+				u32 opnum[NFSD_MAX_OPS_PER_COMPOUND]; /* NFSv4 compund */
+			} rqstp_info;
+			unsigned int status_counter;
+			char buf[RPC_MAX_ADDRBUFLEN];
+			int j, opcnt = 0;
+
+			if (!test_bit(RQ_BUSY, &rqstp->rq_flags))
+				continue;
+
+			status_counter = atomic_read(&rqstp->rq_status_counter);
Quoted 7 lines · Neil

I suggest you add add a counter to the rqstp which is incremented from even to odd after parsing a request - including he v4 parsing needed to have a sable ->opcnt - and then incremented from odd to even when the request is complete.
Then this code samples the counter, skips the rqst if the counter is even, and resamples the counter after collecting the data. If it has changed, the drop the record.

Quoted 1 line

I don't see a check if the status counter is even.

...and there does need to be one. If the counter is even, then the fields are meaningless and unstable. The RQ_BUSY check is, I think, meant to check if the fields are meaningful, but they aren't meaningful until some time after RQ_BUSY is clear.

I would replace the "RQ_BUSY not set" test with "counter is even"

Quoted 3 lines

Also, as above, I'm not sure atomic_read() is necessary here. Maybe just READ_ONCE() ? Neil, any thoughts?

Agree - we don't need an atomic as there is a single writer. I think
smp_store_release(rqstp->counter, rqstp->counter|1)
to increment it after parsing the request. This makes it abundantly clear the value will be odd, and ensures that if another thread sees the 'odd' value, then it can also see the results of the parse.

To increment after processing the request,
smp_store_release(rqstp->counter, rqstp->counter + 1)

Then
counter = smp_load_acquire(rqstp->counter);
if ((counter & 1) == 0)
to test if it is even before reading the state. This ensure that if it sees "odd' it will see the results of the parse.

and
if ((smp_load_acquire(counter) == counter) continue;

before trusting that the data we read was consistent.

Note that we "release" *after* something and "acquire" *before" something.
I think it helps to always think about what the access is "before" or "after" when reasoning about barriers.
checkpatch will want a comment before these acquire and release operation. I recommend using the corresponding word "before" or "after" in that comment.

NeilBrown

#8 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

Quoted 2 lines · Chuck Lever
Quoted 1 line · Lorenzo Bianconi

[...]

Quoted 11 lines
Quoted 11 lines
Quoted 7 lines · Neil

I suggest you add add a counter to the rqstp which is incremented from even to odd after parsing a request - including he v4 parsing needed to have a sable ->opcnt - and then incremented from odd to even when the request is complete.
Then this code samples the counter, skips the rqst if the counter is even, and resamples the counter after collecting the data. If it has changed, the drop the record.

Quoted 8 lines
Quoted 1 line

I don't see a check if the status counter is even.

...and there does need to be one. If the counter is even, then the fields are meaningless and unstable. The RQ_BUSY check is, I think, meant to check if the fields are meaningful, but they aren't meaningful until some time after RQ_BUSY is clear.

I would replace the "RQ_BUSY not set" test with "counter is even"

ack, I will fix it.

Quoted 26 lines
Quoted 4 lines

Also, as above, I'm not sure atomic_read() is necessary here. Maybe just READ_ONCE() ? Neil, any thoughts?

Agree - we don't need an atomic as there is a single writer. I think
smp_store_release(rqstp->counter, rqstp->counter|1)
to increment it after parsing the request. This makes it abundantly clear the value will be odd, and ensures that if another thread sees the 'odd' value, then it can also see the results of the parse.

To increment after processing the request,
smp_store_release(rqstp->counter, rqstp->counter + 1)

Then
counter = smp_load_acquire(rqstp->counter);
if ((counter & 1) == 0)
to test if it is even before reading the state. This ensure that if it sees "odd' it will see the results of the parse.

and
if ((smp_load_acquire(counter) == counter) continue;

before trusting that the data we read was consistent.

Quoted 7 lines

Note that we "release" *after* something and "acquire" *before" something.
I think it helps to always think about what the access is "before" or "after" when reasoning about barriers.
checkpatch will want a comment before these acquire and release operation. I recommend using the corresponding word "before" or "after" in that comment.

ack, I will add it.

Regards,
Lorenzo

Quoted 3 lines

NeilBrown

#9 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

In reply to Chuck Lever

[...]

Quoted 8 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+	atomic_inc(&rqstp->rq_status_counter);
+

Does this really have to be an atomic_t ? Seems like nfsd_dispatch is the only function updating it. You might need release semantics here and acquire semantics in nfsd_rpc_status_show(). I'd rather avoid a full-on atomic op in nfsd_dispatch() unless it's absolutely needed.

ack, I agree. I will work on it.

Quoted 3 lines

Also, do you need to bump the rq_status_counter in the other RPC dispatch routines (lockd and nfs callback) too?

the only consumer at the moment is nfsd, do you think we should add them in advance for lockd as well?

Quoted 63 lines
Quoted 52 lines
fs/nfsd/nfssvc.c +36 -0
 	rp = NULL;
 	switch (nfsd_cache_lookup(rqstp, &rp)) {
 	case RC_DOIT:
@@ -1074,6 +1076,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_encode(rqstp, &rqstp->rq_res_stream))
 		goto out_encode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1);
 out_cached_reply:
 	return 1;
@@ -1149,3 +1153,121 @@ int nfsd_pool_stats_release(struct inode *inode, struct file *file)
 	mutex_unlock(&nfsd_mutex);
 	return ret;
 }
+
+static int nfsd_rpc_status_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = file_inode(m->file);
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+	int i;
+
+	rcu_read_lock();
+
+	for (i = 0; i < nn->nfsd_serv->sv_nrpools; i++) {
+		struct svc_rqst *rqstp;
+
+		list_for_each_entry_rcu(rqstp,
+				&nn->nfsd_serv->sv_pools[i].sp_all_threads,
+				rq_all) {
+			struct nfsd_rpc_status_info {
+				struct sockaddr daddr;
+				struct sockaddr saddr;
+				unsigned long rq_flags;
+				__be32 rq_xid;
+				u32 rq_prog;
+				u32 rq_vers;
+				const char *pc_name;
+				ktime_t rq_stime;
+				u32 opnum[NFSD_MAX_OPS_PER_COMPOUND]; /* NFSv4 compund */
+			} rqstp_info;
+			unsigned int status_counter;
+			char buf[RPC_MAX_ADDRBUFLEN];
+			int j, opcnt = 0;
+
+			if (!test_bit(RQ_BUSY, &rqstp->rq_flags))
+				continue;
+
+			status_counter = atomic_read(&rqstp->rq_status_counter);
Quoted 7 lines · Neil

I suggest you add add a counter to the rqstp which is incremented from even to odd after parsing a request - including he v4 parsing needed to have a sable ->opcnt - and then incremented from odd to even when the request is complete.
Then this code samples the counter, skips the rqst if the counter is even, and resamples the counter after collecting the data. If it has changed, the drop the record.

Quoted 4 lines

I don't see a check if the status counter is even.

Also, as above, I'm not sure atomic_read() is necessary here. Maybe just READ_ONCE() ? Neil, any thoughts?

I used the RQ_BUSY check instead of checking if the counter is even, but I can see the point now. I will fix it.

Quoted 60 lines
Quoted 60 lines
fs/nfsd/nfssvc.c +58 -0
+
+			rqstp_info.rq_xid = rqstp->rq_xid;
+			rqstp_info.rq_flags = rqstp->rq_flags;
+			rqstp_info.rq_prog = rqstp->rq_prog;
+			rqstp_info.rq_vers = rqstp->rq_vers;
+			rqstp_info.pc_name = svc_proc_name(rqstp);
+			rqstp_info.rq_stime = rqstp->rq_stime;
+			memcpy(&rqstp_info.daddr, svc_daddr(rqstp),
+			       sizeof(struct sockaddr));
+			memcpy(&rqstp_info.saddr, svc_addr(rqstp),
+			       sizeof(struct sockaddr));
+
+#ifdef CONFIG_NFSD_V4
+			if (rqstp->rq_vers == NFS4_VERSION &&
+			    rqstp->rq_proc == NFSPROC4_COMPOUND) {
+				/* NFSv4 compund */
+				struct nfsd4_compoundargs *args = rqstp->rq_argp;
+
+				opcnt = args->opcnt;
+				for (j = 0; j < opcnt; j++) {
+					struct nfsd4_op *op = &args->ops[j];
+
+					rqstp_info.opnum[j] = op->opnum;
+				}
+			}
+#endif /* CONFIG_NFSD_V4 */
+
+			/* In order to detect if the RPC request is pending and
+			 * RPC info are stable we check if rq_status_counter
+			 * has been incremented during the handler processing.
+			 */
+			if (status_counter != atomic_read(&rqstp->rq_status_counter))
+				continue;
+
+			seq_printf(m,
+				   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",
+				   be32_to_cpu(rqstp_info.rq_xid),
+				   rqstp_info.rq_flags,
+				   rqstp_info.rq_prog,
+				   rqstp_info.rq_vers,
+				   rqstp_info.pc_name,
+				   ktime_to_us(rqstp_info.rq_stime));
+
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.saddr, buf,
+						    sizeof(buf), false));
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.daddr, buf,
+						    sizeof(buf), false));
+			for (j = 0; j < opcnt; j++)
+				seq_printf(m, " %s%s",
+					   nfsd4_op_name(rqstp_info.opnum[j]),
+					   j == opcnt - 1 ? "," : "");
+			seq_puts(m, "\n");
+		}
+	}
+
+	rcu_read_unlock();
Quoted 8 lines

fs/nfsd/nfssvc.c int nfsd_pool_stats_release(struct inode *inode, struct file *file) · line 1253

Quoted 6 lines
fs/nfsd/nfssvc.c +6 -0
+
+	return 0;
+}
+
+/**
+ * nfsd_rpc_status_open - Atomically copy a write verifier

The kdoc comment maybe was copied, pasted, and then not updated?

ack, I will fix it.

Regards,
Lorenzo

Quoted 53 lines
Quoted 49 lines

+ * @inode: entry inode pointer.
+ * @file: entry file pointer.
+ *
+ * This routine dumps pending RPC requests info queued into nfs server.
+ */

fs/nfsd/nfssvc.c +15 -0
+int nfsd_rpc_status_open(struct inode *inode, struct file *file)
+{
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+
+	mutex_lock(&nfsd_mutex);
+	if (!nn->nfsd_serv) {
+		mutex_unlock(&nfsd_mutex);
+		return -ENODEV;
+	}
+
+	svc_get(nn->nfsd_serv);
+	mutex_unlock(&nfsd_mutex);
+
+	return single_open(file, nfsd_rpc_status_show, inode->i_private);
+}
include/linux/sunrpc/svc.h +1 -0
index fe1394cc1371..cb516da9e270 100644
@@ -270,6 +270,7 @@ struct svc_rqst {
 						 * net namespace
 						 */
 	void **			rq_lease_breaker; /* The v4 client breaking a lease */
+	atomic_t		rq_status_counter; /* RPC processing counter */
 };
 
 #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
net/sunrpc/svc.c +1 -1
index 587811a002c9..44eac83b35a1 100644
@@ -1629,7 +1629,7 @@ const char *svc_proc_name(const struct svc_rqst *rqstp)
 		return rqstp->rq_procinfo->pc_name;
 	return "unknown";
 }
-
+EXPORT_SYMBOL_GPL(svc_proc_name);
 
 /**
  * svc_encode_result_payload - mark a range of bytes as a result payload
Signature · 1 line
2.41.0
Signature · 1 line
Chuck Lever
#10 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

Quoted 10 lines · Lorenzo Bianconi

[...]

Quoted 8 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+	atomic_inc(&rqstp->rq_status_counter);
+

Does this really have to be an atomic_t ? Seems like nfsd_dispatch is the only function updating it. You might need release semantics here and acquire semantics in nfsd_rpc_status_show(). I'd rather avoid a full-on atomic op in nfsd_dispatch() unless it's absolutely needed.

Quoted 8 lines

ack, I agree. I will work on it.

Quoted 3 lines

Also, do you need to bump the rq_status_counter in the other RPC dispatch routines (lockd and nfs callback) too?

the only consumer at the moment is nfsd, do you think we should add them in advance for lockd as well?

Ah... the reporting facility is added to the NFS server, not to SunRPC. My mistake. I got confused because struct svc_rqst is an RPC layer object.

So this is kind of a layering violation. The counter is for NFS procedures, but it's being added to svc_rqst, which is an RPC layer object. We're trying to fix up the places where NFSD stashes its state in RPC structures. (I recall that Neil suggested this arrangement).

But I don't have a better suggestion for where to put the counter. Leave it where it is for now, and we'll come up with something down the road ... or we'll decide we want the same watchdog for all RPC services. ;-)

Quoted 197 lines
Quoted 61 lines
Quoted 50 lines
fs/nfsd/nfssvc.c +36 -0
 	rp = NULL;
 	switch (nfsd_cache_lookup(rqstp, &rp)) {
 	case RC_DOIT:
@@ -1074,6 +1076,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_encode(rqstp, &rqstp->rq_res_stream))
 		goto out_encode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1);
 out_cached_reply:
 	return 1;
@@ -1149,3 +1153,121 @@ int nfsd_pool_stats_release(struct inode *inode, struct file *file)
 	mutex_unlock(&nfsd_mutex);
 	return ret;
 }
+
+static int nfsd_rpc_status_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = file_inode(m->file);
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+	int i;
+
+	rcu_read_lock();
+
+	for (i = 0; i < nn->nfsd_serv->sv_nrpools; i++) {
+		struct svc_rqst *rqstp;
+
+		list_for_each_entry_rcu(rqstp,
+				&nn->nfsd_serv->sv_pools[i].sp_all_threads,
+				rq_all) {
+			struct nfsd_rpc_status_info {
+				struct sockaddr daddr;
+				struct sockaddr saddr;
+				unsigned long rq_flags;
+				__be32 rq_xid;
+				u32 rq_prog;
+				u32 rq_vers;
+				const char *pc_name;
+				ktime_t rq_stime;
+				u32 opnum[NFSD_MAX_OPS_PER_COMPOUND]; /* NFSv4 compund */
+			} rqstp_info;
+			unsigned int status_counter;
+			char buf[RPC_MAX_ADDRBUFLEN];
+			int j, opcnt = 0;
+
+			if (!test_bit(RQ_BUSY, &rqstp->rq_flags))
+				continue;
+
+			status_counter = atomic_read(&rqstp->rq_status_counter);
Quoted 7 lines · Neil

I suggest you add add a counter to the rqstp which is incremented from even to odd after parsing a request - including he v4 parsing needed to have a sable ->opcnt - and then incremented from odd to even when the request is complete.
Then this code samples the counter, skips the rqst if the counter is even, and resamples the counter after collecting the data. If it has changed, the drop the record.

Quoted 4 lines

I don't see a check if the status counter is even.

Also, as above, I'm not sure atomic_read() is necessary here. Maybe just READ_ONCE() ? Neil, any thoughts?

I used the RQ_BUSY check instead of checking if the counter is even, but I can see the point now. I will fix it.

Quoted 60 lines
Quoted 60 lines
fs/nfsd/nfssvc.c +58 -0
+
+			rqstp_info.rq_xid = rqstp->rq_xid;
+			rqstp_info.rq_flags = rqstp->rq_flags;
+			rqstp_info.rq_prog = rqstp->rq_prog;
+			rqstp_info.rq_vers = rqstp->rq_vers;
+			rqstp_info.pc_name = svc_proc_name(rqstp);
+			rqstp_info.rq_stime = rqstp->rq_stime;
+			memcpy(&rqstp_info.daddr, svc_daddr(rqstp),
+			       sizeof(struct sockaddr));
+			memcpy(&rqstp_info.saddr, svc_addr(rqstp),
+			       sizeof(struct sockaddr));
+
+#ifdef CONFIG_NFSD_V4
+			if (rqstp->rq_vers == NFS4_VERSION &&
+			    rqstp->rq_proc == NFSPROC4_COMPOUND) {
+				/* NFSv4 compund */
+				struct nfsd4_compoundargs *args = rqstp->rq_argp;
+
+				opcnt = args->opcnt;
+				for (j = 0; j < opcnt; j++) {
+					struct nfsd4_op *op = &args->ops[j];
+
+					rqstp_info.opnum[j] = op->opnum;
+				}
+			}
+#endif /* CONFIG_NFSD_V4 */
+
+			/* In order to detect if the RPC request is pending and
+			 * RPC info are stable we check if rq_status_counter
+			 * has been incremented during the handler processing.
+			 */
+			if (status_counter != atomic_read(&rqstp->rq_status_counter))
+				continue;
+
+			seq_printf(m,
+				   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",
+				   be32_to_cpu(rqstp_info.rq_xid),
+				   rqstp_info.rq_flags,
+				   rqstp_info.rq_prog,
+				   rqstp_info.rq_vers,
+				   rqstp_info.pc_name,
+				   ktime_to_us(rqstp_info.rq_stime));
+
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.saddr, buf,
+						    sizeof(buf), false));
+			seq_printf(m, " %s,",
+				   __svc_print_addr(&rqstp_info.daddr, buf,
+						    sizeof(buf), false));
+			for (j = 0; j < opcnt; j++)
+				seq_printf(m, " %s%s",
+					   nfsd4_op_name(rqstp_info.opnum[j]),
+					   j == opcnt - 1 ? "," : "");
+			seq_puts(m, "\n");
+		}
+	}
+
+	rcu_read_unlock();
Quoted 8 lines

fs/nfsd/nfssvc.c int nfsd_pool_stats_release(struct inode *inode, struct file *file) · line 1253

Quoted 6 lines
fs/nfsd/nfssvc.c +6 -0
+
+	return 0;
+}
+
+/**
+ * nfsd_rpc_status_open - Atomically copy a write verifier

The kdoc comment maybe was copied, pasted, and then not updated?

ack, I will fix it.

Regards,
Lorenzo

Quoted 53 lines
Quoted 49 lines

+ * @inode: entry inode pointer.
+ * @file: entry file pointer.
+ *
+ * This routine dumps pending RPC requests info queued into nfs server.
+ */

fs/nfsd/nfssvc.c +15 -0
+int nfsd_rpc_status_open(struct inode *inode, struct file *file)
+{
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+
+	mutex_lock(&nfsd_mutex);
+	if (!nn->nfsd_serv) {
+		mutex_unlock(&nfsd_mutex);
+		return -ENODEV;
+	}
+
+	svc_get(nn->nfsd_serv);
+	mutex_unlock(&nfsd_mutex);
+
+	return single_open(file, nfsd_rpc_status_show, inode->i_private);
+}
include/linux/sunrpc/svc.h +1 -0
index fe1394cc1371..cb516da9e270 100644
@@ -270,6 +270,7 @@ struct svc_rqst {
 						 * net namespace
 						 */
 	void **			rq_lease_breaker; /* The v4 client breaking a lease */
+	atomic_t		rq_status_counter; /* RPC processing counter */
 };
 
 #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
net/sunrpc/svc.c +1 -1
index 587811a002c9..44eac83b35a1 100644
@@ -1629,7 +1629,7 @@ const char *svc_proc_name(const struct svc_rqst *rqstp)
 		return rqstp->rq_procinfo->pc_name;
 	return "unknown";
 }
-
+EXPORT_SYMBOL_GPL(svc_proc_name);
 
 /**
  * svc_encode_result_payload - mark a range of bytes as a result payload
Signature · 1 line
2.41.0
Signature · 1 line
Chuck Lever
Signature · 1 line
Chuck Lever
#11 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

In reply to Lorenzo Bianconi
Quoted 41 lines · Lorenzo Bianconi

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

---
 fs/nfsd/nfs4proc.c         |   4 +-
 fs/nfsd/nfsctl.c           |  10 +++
 fs/nfsd/nfsd.h             |   2 +
 fs/nfsd/nfssvc.c           | 122 +++++++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h |   1 +
 net/sunrpc/svc.c           |   2 +-
 6 files changed, 137 insertions(+), 4 deletions(-)
fs/nfsd/nfs4proc.c +1 -3
index f0f318e78630..b7ad3081bc36 100644
@@ -2497,8 +2497,6 @@ static inline void nfsd4_increment_op_stats(u32 opnum)
 
 static const struct nfsd4_operation nfsd4_ops[];
 
-static const char *nfsd4_op_name(unsigned opnum);
-
 /*
  * Enforce NFSv4.1 COMPOUND ordering rules:
  *
@@ -3628,7 +3626,7 @@ void warn_on_nonidempotent_op(struct nfsd4_op *op)
 	}
 }
 
-static const char *nfsd4_op_name(unsigned opnum)
+const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
fs/nfsd/nfsctl.c +0 -0
index 35d2e2cde1eb..f2e4f4b1e4d1 100644

fs/nfsd/nfsctl.c enum { · line 60

Quoted 4 lines
fs/nfsd/nfsctl.c +1 -0
@@ -57,6 +57,8 @@ enum {
 	NFSD_RecoveryDir,
 	NFSD_V4EndGrace,
 #endif
+	NFSD_Rpc_Status,

I think NFSD_Rpc_Status needs to come before the CONFIG_NFSD_V4 block. Otherwise the comment above (which I apparently approved) makes even less sense than it does now.
(Maybe just remove the comment??)

Quoted 132 lines
fs/nfsd/nfsctl.c +9 -0
+
 	NFSD_MaxReserved
 };
 
@@ -195,6 +197,13 @@ static inline struct net *netns(struct file *file)
 	return file_inode(file)->i_sb->s_fs_info;
 }
 
+static const struct file_operations nfsd_rpc_status_operations = {
+	.open		= nfsd_rpc_status_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= nfsd_pool_stats_release,
+};
+
 /*
  * write_unlock_ip - Release all locks used by a client
  *
@@ -1400,6 +1409,7 @@ static int nfsd_fill_super(struct super_block *sb, struct fs_context *fc)
 		[NFSD_RecoveryDir] = {"nfsv4recoverydir", &transaction_ops, S_IWUSR|S_IRUSR},
 		[NFSD_V4EndGrace] = {"v4_end_grace", &transaction_ops, S_IWUSR|S_IRUGO},
 #endif
+		[NFSD_Rpc_Status] = {"rpc_status", &nfsd_rpc_status_operations, S_IRUGO},
 		/* last one */ {""}
 	};
 
fs/nfsd/nfsd.h +2 -0
index d88498f8b275..75a3e1d55bc8 100644
@@ -94,6 +94,7 @@ int		nfsd_get_nrthreads(int n, int *, struct net *);
 int		nfsd_set_nrthreads(int n, int *, struct net *);
 int		nfsd_pool_stats_open(struct inode *, struct file *);
 int		nfsd_pool_stats_release(struct inode *, struct file *);
+int		nfsd_rpc_status_open(struct inode *inode, struct file *file);
 void		nfsd_shutdown_threads(struct net *net);
 
 void		nfsd_put(struct net *net);
@@ -506,6 +507,7 @@ extern void nfsd4_ssc_init_umount_work(struct nfsd_net *nn);
 
 extern void nfsd4_init_leases_net(struct nfsd_net *nn);
 
+const char *nfsd4_op_name(unsigned opnum);
 #else /* CONFIG_NFSD_V4 */
 static inline int nfsd4_is_junction(struct dentry *dentry)
 {
fs/nfsd/nfssvc.c +64 -0
index 97830e28c140..e9e954b5ae47 100644
@@ -1057,6 +1057,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_decode(rqstp, &rqstp->rq_arg_stream))
 		goto out_decode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	rp = NULL;
 	switch (nfsd_cache_lookup(rqstp, &rp)) {
 	case RC_DOIT:
@@ -1074,6 +1076,8 @@ int nfsd_dispatch(struct svc_rqst *rqstp)
 	if (!proc->pc_encode(rqstp, &rqstp->rq_res_stream))
 		goto out_encode_err;
 
+	atomic_inc(&rqstp->rq_status_counter);
+
 	nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1);
 out_cached_reply:
 	return 1;
@@ -1149,3 +1153,121 @@ int nfsd_pool_stats_release(struct inode *inode, struct file *file)
 	mutex_unlock(&nfsd_mutex);
 	return ret;
 }
+
+static int nfsd_rpc_status_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = file_inode(m->file);
+	struct nfsd_net *nn = net_generic(inode->i_sb->s_fs_info, nfsd_net_id);
+	int i;
+
+	rcu_read_lock();
+
+	for (i = 0; i < nn->nfsd_serv->sv_nrpools; i++) {
+		struct svc_rqst *rqstp;
+
+		list_for_each_entry_rcu(rqstp,
+				&nn->nfsd_serv->sv_pools[i].sp_all_threads,
+				rq_all) {
+			struct nfsd_rpc_status_info {
+				struct sockaddr daddr;
+				struct sockaddr saddr;
+				unsigned long rq_flags;
+				__be32 rq_xid;
+				u32 rq_prog;
+				u32 rq_vers;
+				const char *pc_name;
+				ktime_t rq_stime;
+				u32 opnum[NFSD_MAX_OPS_PER_COMPOUND]; /* NFSv4 compund */
+			} rqstp_info;
+			unsigned int status_counter;
+			char buf[RPC_MAX_ADDRBUFLEN];
+			int j, opcnt = 0;
+
+			if (!test_bit(RQ_BUSY, &rqstp->rq_flags))
+				continue;
+
+			status_counter = atomic_read(&rqstp->rq_status_counter);
+
+			rqstp_info.rq_xid = rqstp->rq_xid;
+			rqstp_info.rq_flags = rqstp->rq_flags;
+			rqstp_info.rq_prog = rqstp->rq_prog;
+			rqstp_info.rq_vers = rqstp->rq_vers;
+			rqstp_info.pc_name = svc_proc_name(rqstp);
+			rqstp_info.rq_stime = rqstp->rq_stime;
+			memcpy(&rqstp_info.daddr, svc_daddr(rqstp),
+			       sizeof(struct sockaddr));
+			memcpy(&rqstp_info.saddr, svc_addr(rqstp),
+			       sizeof(struct sockaddr));
+
+#ifdef CONFIG_NFSD_V4
+			if (rqstp->rq_vers == NFS4_VERSION &&
+			    rqstp->rq_proc == NFSPROC4_COMPOUND) {
+				/* NFSv4 compund */
+				struct nfsd4_compoundargs *args = rqstp->rq_argp;
+
+				opcnt = args->opcnt;
+				for (j = 0; j < opcnt; j++) {
+					struct nfsd4_op *op = &args->ops[j];
+
+					rqstp_info.opnum[j] = op->opnum;
+				}
+			}
+#endif /* CONFIG_NFSD_V4 */

fs/nfsd/nfssvc.c int nfsd_pool_stats_release(struct inode *inode, struct file *file) · line 1225

Quoted 10 lines
fs/nfsd/nfssvc.c +10 -0
+
+			/* In order to detect if the RPC request is pending and
+			 * RPC info are stable we check if rq_status_counter
+			 * has been incremented during the handler processing.
+			 */
+			if (status_counter != atomic_read(&rqstp->rq_status_counter))
+				continue;
+
+			seq_printf(m,
+				   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",

Please drop the commas.
It might be defensible to have commas and no spaces by comparing with /proc/fs/nfsd/supported_krb5_enctypes, but the dominant pattern is to use only spaces to separate fields on /proc files.

Thanks,
NeilBrown

#12 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

Quoted 4 lines · Lorenzo Bianconi
Quoted 3 lines

Introduce rpc_status entry in nfsd debug filesystem in order to dump pending RPC requests debugging information.

Hi Neil,

thx for the review.

Quoted 39 lines
Quoted 39 lines
---
 fs/nfsd/nfs4proc.c         |   4 +-
 fs/nfsd/nfsctl.c           |  10 +++
 fs/nfsd/nfsd.h             |   2 +
 fs/nfsd/nfssvc.c           | 122 +++++++++++++++++++++++++++++++++++++
 include/linux/sunrpc/svc.h |   1 +
 net/sunrpc/svc.c           |   2 +-
 6 files changed, 137 insertions(+), 4 deletions(-)
fs/nfsd/nfs4proc.c +1 -3
index f0f318e78630..b7ad3081bc36 100644
@@ -2497,8 +2497,6 @@ static inline void nfsd4_increment_op_stats(u32 opnum)
 
 static const struct nfsd4_operation nfsd4_ops[];
 
-static const char *nfsd4_op_name(unsigned opnum);
-
 /*
  * Enforce NFSv4.1 COMPOUND ordering rules:
  *
@@ -3628,7 +3626,7 @@ void warn_on_nonidempotent_op(struct nfsd4_op *op)
 	}
 }
 
-static const char *nfsd4_op_name(unsigned opnum)
+const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
fs/nfsd/nfsctl.c +0 -0
index 35d2e2cde1eb..f2e4f4b1e4d1 100644
@@ -57,6 +57,8 @@ enum {
 	NFSD_RecoveryDir,
Quoted 8 lines

fs/nfsd/nfsctl.c enum { · line 60

Quoted 3 lines
fs/nfsd/nfsctl.c +1 -0
 	NFSD_V4EndGrace,
 #endif
+	NFSD_Rpc_Status,

I think NFSD_Rpc_Status needs to come before the CONFIG_NFSD_V4 block. Otherwise the comment above (which I apparently approved) makes even less sense than it does now.
(Maybe just remove the comment??)

ack, right. I will fix it.

Quoted 9 lines
Quoted 9 lines
fs/nfsd/nfsctl.c +1 -0
+
 	NFSD_MaxReserved
 };
 
@@ -195,6 +197,13 @@ static inline struct net *netns(struct file *file)
 	return file_inode(file)->i_sb->s_fs_info;
 }
 

[...]

Quoted 8 lines
Quoted 8 lines
fs/nfsd/nfsctl.c +8 -0
+#endif /* CONFIG_NFSD_V4 */
+
+			/* In order to detect if the RPC request is pending and
+			 * RPC info are stable we check if rq_status_counter
+			 * has been incremented during the handler processing.
+			 */
+			if (status_counter != atomic_read(&rqstp->rq_status_counter))
+				continue;
Quoted 8 lines

fs/nfsd/nfsctl.c

Quoted 3 lines
fs/nfsd/nfsctl.c +3 -0
+
+			seq_printf(m,
+				   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",

Please drop the commas.
It might be defensible to have commas and no spaces by comparing with /proc/fs/nfsd/supported_krb5_enctypes, but the dominant pattern is to use only spaces to separate fields on /proc files.

ack, I will fix it.

Regards,
Lorenzo

Quoted 4 lines

Thanks,
NeilBrown

#13 lore raw

Re: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem

In reply to Lorenzo Bianconi
kernel test robot noticed the following build errors:

Hi Lorenzo,

kernel test robot noticed the following build errors:

[auto build test ERROR on next-20230728]
[cannot apply to trondmy-nfs/linux-next linus/master v6.5-rc3 v6.5-rc2 v6.5-rc1 v6.5-rc3] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Lorenzo-Bianconi/SUNRPC-add-verbose-parameter-to-__svc_print_addr/20230729-024652
base:   next-20230728
patch link:    https://lore.kernel.org/r/a23a0482a465299ac06d07d191e0c9377a11a4d1.1690569488.git.lorenzo%40kernel.org
patch subject: [PATCH v4 2/2] NFSD: add rpc_status entry in nfsd debug filesystem
config: alpha-defconfig (https://download.01.org/0day-ci/archive/20230729/[email protected]/config)
compiler: alpha-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230729/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All error/warnings (new ones prefixed by >>):

fs/nfsd/nfssvc.c: In function 'nfsd_rpc_status_show':

>> fs/nfsd/nfssvc.c:1241:44: error: implicit declaration of function 'nfsd4_op_name'; did you mean 'nfsd_rename'? [-Werror=implicit-function-declaration]
    1241 |                                            nfsd4_op_name(rqstp_info.opnum[j]),
         |                                            ^~~~~~~~~~~~~
         |                                            nfsd_rename
>> fs/nfsd/nfssvc.c:1240:50: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'int' [-Wformat=]
    1240 |                                 seq_printf(m, " %s%s",
         |                                                 ~^
         |                                                  |
         |                                                  char *
         |                                                 %d
    1241 |                                            nfsd4_op_name(rqstp_info.opnum[j]),
         |                                            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                                            |
         |                                            int

cc1: some warnings being treated as errors

vim +1241 fs/nfsd/nfssvc.c

1216
1217 /* In order to detect if the RPC request is pending and
1218 * RPC info are stable we check if rq_status_counter
1219 * has been incremented during the handler processing.
1220 */
1221 if (status_counter != atomic_read(&rqstp->rq_status_counter))
1222 continue;
1223
1224 seq_printf(m,

  1225					   "0x%08x, 0x%08lx, 0x%08x, NFSv%d, %s, %016lld,",
  1226					   be32_to_cpu(rqstp_info.rq_xid),
  1227					   rqstp_info.rq_flags,
  1228					   rqstp_info.rq_prog,
  1229					   rqstp_info.rq_vers,
  1230					   rqstp_info.pc_name,
  1231					   ktime_to_us(rqstp_info.rq_stime));
  1232	
  1233				seq_printf(m, " %s,",
  1234					   __svc_print_addr(&rqstp_info.saddr, buf,
  1235							    sizeof(buf), false));
  1236				seq_printf(m, " %s,",
  1237					   __svc_print_addr(&rqstp_info.daddr, buf,
  1238							    sizeof(buf), false));
  1239				for (j = 0; j < opcnt; j++)
> 1240					seq_printf(m, " %s%s",
> 1241						   nfsd4_op_name(rqstp_info.opnum[j]),

1242 j == opcnt - 1 ? "," : "");
1243 seq_puts(m, "\n");
1244 }
1245 }
1246
1247 rcu_read_unlock();
1248
1249 return 0;
1250 }
1251

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki