tools/nolibc: add 32/64-bit powerpc support
Subsystems (2)
v4 cover tools/nolibc: add 32/64-bit powerpc support
Hi, Willy, Hi Thomas
v4 here is mainly with a new nolibc-test-config target from your suggestions and with the reordering of some patches to make nolibc-test-config be fast forward.
run-user tests for all of the powerpc variants:
$ for arch in ppc ppc64 ppc64le; do make run-user XARCH=$arch | grep status; done
165 test(s): 157 passed, 8 skipped, 0 failed => status: warning
165 test(s): 157 passed, 8 skipped, 0 failed => status: warning
165 test(s): 157 passed, 8 skipped, 0 failed => status: warningand defconfig + run for ppc:
$ make nolibc-test-config XARCH=ppc
$ make run XARCH=ppc
165 test(s): 159 passed, 6 skipped, 0 failed => status: warning* tools/nolibc: add support for powerpc
tools/nolibc: add support for powerpc64
No change.
* selftests/nolibc: fix up O= option support selftests/nolibc: add macros to reduce duplicated changes
From tinyconfig-part1 patchset, required by our nolibc-test-config target
Let nolibc-test-config be able to use objtree and the kernel related macros directly.
* selftests/nolibc: add XARCH and ARCH mapping support
Moved before nolibc-test-config, for the NOLIBC_TEST_CONFIG macro used by nolibc-test-config target
Willy talked about this twice, let nolibc-test-config be able to use nolibc-test-$(XARCH).config listed in NOLIBC_TEST_CONFIG directly.
* selftests/nolibc: add nolibc-test-config target selftests/nolibc: add help for nolibc-test-config target
A new generic nolibc-test-config target is added, allows to enable additional options for a top-level config target.
defconfig is reserved as an alias of nolibc-test-config.
As suggested by Thomas and Willy.
* selftests/nolibc: add test support for ppc
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc64
Renamed from $(XARCH).config to nolibc-test-$(XARCH).config
As suggested by Willy.
* selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc
Moved here as suggested by Willy.
Best regards,
Zhangjin
---
[1]: https://lore.kernel.org/lkml/[email protected]/
Zhangjin Wu (12):
tools/nolibc: add support for powerpc
tools/nolibc: add support for powerpc64 selftests/nolibc: fix up O= option support selftests/nolibc: add macros to reduce duplicated changes selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add nolibc-test-config target selftests/nolibc: add help for nolibc-test-config target selftests/nolibc: add test support for ppc selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc64 selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc
tools/include/nolibc/arch-powerpc.h | 202 ++++++++++++++++++ tools/include/nolibc/arch.h | 2 + tools/testing/selftests/nolibc/Makefile | 157 ++++++++++---- .../nolibc/configs/nolibc-test-ppc.config | 3 + 4 files changed, 327 insertions(+), 37 deletions(-) create mode 100644 tools/include/nolibc/arch-powerpc.h create mode 100644 tools/testing/selftests/nolibc/configs/nolibc-test-ppc.config
Signature · 1 line
2.25.1
PATCH v4 1/12 tools/nolibc: add support for powerpc
Both syscall declarations and _start code definition are added for powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit) to record the error occurred, and uses another register to return the value [1]. So, the return value of every syscall declaration must be normalized to match the __sysret() helper, return -value when there is an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit, glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register to r0 at first, and then check the summary overflow bit in cr0:
mfcr r0
r0 & (1 << 28) ? -r3 : r3
-->
10003c14: 7c 00 00 26 mfcr r0
10003c18: 74 09 10 00 andis. r9,r0,4096
10003c1c: 41 82 00 08 beq 0x10003c24
10003c20: 7c 63 00 d0 neg r3,r3Musl (arch/powerpc/syscall_arch.h) directly checks the summary overflow bit with the 'bns' instruction, it is smaller:
/* no summary overflow bit means no error, return value directly */
bns+ 1f
/* otherwise, return negated value */
neg r3, r3
1:
-->
10000418: 40 a3 00 08 bns 0x10000420
1000041c: 7c 63 00 d0 neg r3,r3Like musl, Linux (arch/powerpc/include/asm/vdso/gettimeofday.h) uses the same method for do_syscall_2() too.
Here applies the second method to get smaller size.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
--- tools/include/nolibc/arch-powerpc.h | 188 ++++++++++++++++++++++++++++ tools/include/nolibc/arch.h | 2 + 2 files changed, 190 insertions(+) create mode 100644 tools/include/nolibc/arch-powerpc.h
tools/include/nolibc/arch-powerpc.h new file +188 -0
@@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ +/* +* PowerPC specific definitions for NOLIBC +* Copyright (C) 2023 Zhangjin Wu <[email protected]> +*/ + +#ifndef _NOLIBC_ARCH_POWERPC_H +#define _NOLIBC_ARCH_POWERPC_H + +#include "compiler.h" +#include "crt.h" + +/* Syscalls for PowerPC : +* - stack is 16-byte aligned +* - syscall number is passed in r0 +* - arguments are in r3, r4, r5, r6, r7, r8, r9 +* - the system call is performed by calling "sc" +* - syscall return comes in r3, and the summary overflow bit is checked +* to know if an error occurred, in which case errno is in r3. +* - the arguments are cast to long and assigned into the target +* registers which are then simply passed as registers to the asm code, +* so that we don't have to experience issues with register constraints. +*/ + +#define _NOLIBC_SYSCALL_CLOBBERLIST \ + "memory", "cr0", "r12", "r11", "r10", "r9" + +#define my_syscall0 (num) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num) \ + : \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5", "r4" \ + ); \ + _ret; \ +}) + +#define my_syscall1 (num, arg1) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5", "r4" \ + ); \ + _ret; \ +}) + + +#define my_syscall2 (num, arg1, arg2) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + register long _arg2 __asm__ ("r4") = (long)(arg2); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num), "+r"(_arg2) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5" \ + ); \ + _ret; \ +}) + + +#define my_syscall3 (num, arg1, arg2, arg3) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + register long _arg2 __asm__ ("r4") = (long)(arg2); \ + register long _arg3 __asm__ ("r5") = (long)(arg3); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6" \ + ); \ + _ret; \ +}) + + +#define my_syscall4 (num, arg1, arg2, arg3, arg4) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + register long _arg2 __asm__ ("r4") = (long)(arg2); \ + register long _arg3 __asm__ ("r5") = (long)(arg3); \ + register long _arg4 __asm__ ("r6") = (long)(arg4); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \ + "+r"(_arg4) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7" \ + ); \ + _ret; \ +}) + + +#define my_syscall5 (num, arg1, arg2, arg3, arg4, arg5) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + register long _arg2 __asm__ ("r4") = (long)(arg2); \ + register long _arg3 __asm__ ("r5") = (long)(arg3); \ + register long _arg4 __asm__ ("r6") = (long)(arg4); \ + register long _arg5 __asm__ ("r7") = (long)(arg5); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \ + "+r"(_arg4), "+r"(_arg5) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST, "r8" \ + ); \ + _ret; \ +}) + +#define my_syscall6 (num, arg1, arg2, arg3, arg4, arg5, arg6) \ +({ \ + register long _ret __asm__ ("r3"); \ + register long _num __asm__ ("r0") = (num); \ + register long _arg1 __asm__ ("r3") = (long)(arg1); \ + register long _arg2 __asm__ ("r4") = (long)(arg2); \ + register long _arg3 __asm__ ("r5") = (long)(arg3); \ + register long _arg4 __asm__ ("r6") = (long)(arg4); \ + register long _arg5 __asm__ ("r7") = (long)(arg5); \ + register long _arg6 __asm__ ("r8") = (long)(arg6); \ + \ + __asm__ volatile ( \ + " sc\n" \ + " bns+ 1f\n" \ + " neg %0, %0\n" \ + "1:\n" \ + : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \ + "+r"(_arg4), "+r"(_arg5), "+r"(_arg6) \ + : "0"(_arg1) \ + : _NOLIBC_SYSCALL_CLOBBERLIST \ + ); \ + _ret; \ +}) + +/* startup code */ +void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void) +{ + __asm__volatile ( +"mr 3, 1\n" /* save stack pointer to r3, as arg1 of _start_c */ +"clrrwi 1, 1, 4\n" /* align the stack to 16 bytes */ +"li 0, 0\n" /* zero the frame pointer */ +"stwu 1, -16(1)\n" /* the initial stack frame */ +"bl _start_c\n" /* transfer to c runtime */ + ); +__builtin_unreachable (); +} + +#endif /* _NOLIBC_ARCH_POWERPC_H */
tools/include/nolibc/arch.h +2 -0
@@ -25,6 +25,8 @@#include "arch-aarch64.h" #elif defined(__mips__) && defined(_ABIO32)#include "arch-mips.h" +#elif defined(__powerpc__) +#include "arch-powerpc.h" #elif defined(__riscv)#include "arch-riscv.h" #elif defined(__s390x__)
Signature · 1 line
2.25.1
PATCH v4 2/12 tools/nolibc: add support for powerpc64
In reply to Zhangjin WuThis follows the 64-bit PowerPC ABI [1], refers to the slides: "A new ABI for little-endian PowerPC64 Design & Implementation" [2] and the musl code in arch/powerpc64/crt_arch.h.
First, stdu and clrrdi are used instead of stwu and clrrwi for powerpc64.
Second, the stack frame size is increased to 32 bytes for powerpc64, 32 bytes is the minimal stack frame size supported described in [2].
Besides, the TOC pointer (GOT pointer) must be saved to r2.
This works on both little endian and big endian 64-bit PowerPC.
[1]: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
[2]: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
--- tools/include/nolibc/arch-powerpc.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
tools/include/nolibc/arch-powerpc.h +14 -0
@@ -175,6 +175,19 @@/* startup code */ void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void) { +#ifdef __powerpc64__ +/* On 64-bit PowerPC, save TOC/GOT pointer to r2 */ +extern char TOC __asm__ (".TOC." ); + register volatile long r2 __asm__ ("r2") = (void *)&TOC - (void *)_start; + + __asm__volatile ( +"mr 3, 1\n" /* save stack pointer to r3, as arg1 of _start_c */ +"clrrdi 1, 1, 4\n" /* align the stack to 16 bytes */ +"li 0, 0\n" /* zero the frame pointer */ +"stdu 1, -32(1)\n" /* the initial stack frame */ +"bl _start_c\n" /* transfer to c runtime */ + ); +#else __asm__volatile ("mr 3, 1\n" /* save stack pointer to r3, as arg1 of _start_c */ "clrrwi 1, 1, 4\n" /* align the stack to 16 bytes */
@@ -182,6 +195,7 @@ void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_"stwu 1, -16(1)\n" /* the initial stack frame */ "bl _start_c\n" /* transfer to c runtime */ ); +#endif __builtin_unreachable (); }
Signature · 1 line
2.25.1
PATCH v4 3/12 selftests/nolibc: fix up O= option support
In reply to Zhangjin WuTo avoid pollute the source code tree and avoid mrproper for every architecture switch, the O= argument must be supported.
Both IMAGE and .config are from the building directory, let's use objtree instead of srctree for them.
If no O= option specified, means building kernel in source code tree, objtree should be srctree in such case.
--- tools/testing/selftests/nolibc/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
tools/testing/selftests/nolibc/Makefile +5 -2
@@ -9,6 +9,9 @@ ifeq ($(srctree),) srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) endif +# add objtree for O= argument, required by IMAGE and .config +objtree ?= $(srctree) + ifeq ($(ARCH),) include $(srctree)/scripts/subarch.include ARCH = $(SUBARCH)
@@ -167,12 +170,12 @@ kernel: initramfs # run the tests after building the kernel run: kernel - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" $(Q)$(REPORT) $(CURDIR)/run.out # re-run the tests from an existing kernel rerun: - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" $(Q)$(REPORT) $(CURDIR)/run.out clean:
Signature · 1 line
2.25.1
PATCH v4 4/12 selftests/nolibc: add macros to reduce duplicated changes
In reply to Zhangjin WuThe kernel targets share the same kernel make operations, the same .config file, the same kernel image, add MAKE_KERNEL, KERNEL_CONFIG and KERNEL_IMAGE for them.
Many targets use the same log file, add RUN_OUT to allow save log by architecture, for example: 'make RUN_OUT=$PWD/run.$arch.out'.
The qemu run/rerun targets share the same qemu system run command, add QEMU_SYSTEM_RUN for them.
--- tools/testing/selftests/nolibc/Makefile | 35 ++++++++++++++++--------- 1 file changed, 23 insertions(+), 12 deletions(-)
tools/testing/selftests/nolibc/Makefile +23 -12
@@ -142,41 +142,52 @@ endif libc-test: nolibc-test.c $(QUIET_CC)$(CC) -o $@ $< +# common macros for logging +RUN_OUT = $(CURDIR)/run.out + # local libc-test run-libc-test: libc-test - $(Q)./libc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out + $(Q)./libc-test > "$(RUN_OUT)" || : + $(Q)$(REPORT) "$(RUN_OUT)" # local nolibc-test run-nolibc-test: nolibc-test - $(Q)./nolibc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out + $(Q)./nolibc-test > "$(RUN_OUT)" || : + $(Q)$(REPORT) "$(RUN_OUT)" # qemu user-land test run-user: nolibc-test - $(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out + $(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(RUN_OUT)" || : + $(Q)$(REPORT) "$(RUN_OUT)" initramfs: nolibc-test $(QUIET_MKDIR)mkdir -p initramfs $(call QUIET_INSTALL, initramfs/init) $(Q)cp nolibc-test initramfs/init +# common macros for kernel targets +MAKE_KERNEL = $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) +KERNEL_CONFIG = $(objtree)/.config +KERNEL_IMAGE = $(objtree)/$(IMAGE) + defconfig: - $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) mrproper $(DEFCONFIG) prepare + $(Q)$(MAKE_KERNEL) mrproper $(DEFCONFIG) prepare kernel: initramfs - $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs + $(Q)$(MAKE_KERNEL) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs + +# common macros for qemu run/rerun targets +QEMU_SYSTEM_RUN = qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(KERNEL_IMAGE)" -serial stdio $(QEMU_ARGS) # run the tests after building the kernel run: kernel - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" - $(Q)$(REPORT) $(CURDIR)/run.out + $(Q)$(QEMU_SYSTEM_RUN) > "$(RUN_OUT)" + $(Q)$(REPORT) "$(RUN_OUT)" # re-run the tests from an existing kernel rerun: - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" - $(Q)$(REPORT) $(CURDIR)/run.out + $(Q)$(QEMU_SYSTEM_RUN) > "$(RUN_OUT)" + $(Q)$(REPORT) "$(RUN_OUT)" clean: $(call QUIET_CLEAN, sysroot)
Signature · 1 line
2.25.1
PATCH v4 5/12 selftests/nolibc: add XARCH and ARCH mapping support
In reply to Zhangjin WuMost of the CPU architectures have different variants, but kernel usually only accepts parts of them via the ARCH variable, the others should be customized via kernel config files.
To simplify testing, a new XARCH variable is added to extend the kernel's ARCH with a few variants of the same architecture, and it is used to customize variant specific variables, at last XARCH is converted to the kernel's ARCH:
e.g. make run XARCH=<one of the supported variants>
| \
| `-> variant specific variables:
| IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ...
\
`---> kernel's ARCHXARCH and ARCH are carefully mapped to allow users to pass architecture variants via XARCH or pass architecture via ARCH from cmdline.
PowerPC is the first user and also a very good reference architecture of this mapping, it has variants with different combinations of 32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If the target architecture only has one variant, XARCH is simply an alias of ARCH, no additional mapping required.
--- tools/testing/selftests/nolibc/Makefile | 46 ++++++++++++++++++------- 1 file changed, 34 insertions(+), 12 deletions(-)
tools/testing/selftests/nolibc/Makefile +34 -12
@@ -17,6 +17,27 @@ include $(srctree)/scripts/subarch.include ARCH = $(SUBARCH) endif +# XARCH extends the kernel's ARCH with a few variants of the same +# architecture that only differ by the configuration, the toolchain +# and the Qemu program used. It is copied as-is into ARCH except for +# a few specific values which are mapped like this: +# +# XARCH | ARCH | config +# -------------|-----------|------------------------- +# ppc | powerpc | 32 bits +# ppc64 | powerpc | 64 bits big endian +# ppc64le | powerpc | 64 bits little endian +# +# It is recommended to only use XARCH, though it does not harm if +# ARCH is already set. For simplicity, ARCH is sufficient for all +# architectures where both are equal. + +# configure default variants for target kernel supported architectures +XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) + +# map from user input variants to their kernel supported architectures +ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) + # kernel image names by architecture IMAGE_i386 = arch/x86/boot/bzImage IMAGE_x86_64 = arch/x86/boot/bzImage
@@ -27,7 +48,7 @@ IMAGE_mips = vmlinuz IMAGE_riscv = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi -IMAGE = $(IMAGE_$(ARCH)) +IMAGE = $(IMAGE_$(XARCH)) IMAGE_NAME = $(notdir $(IMAGE)) # default kernel configurations that appear to be usable
@@ -40,7 +61,7 @@ DEFCONFIG_mips = malta_defconfig DEFCONFIG_riscv = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig -DEFCONFIG = $(DEFCONFIG_$(ARCH)) +DEFCONFIG = $(DEFCONFIG_$(XARCH)) # optional tests to run (default = all) TEST =
@@ -55,7 +76,7 @@ QEMU_ARCH_mips = mipsel # works with malta_defconfig QEMU_ARCH_riscv = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64 -QEMU_ARCH = $(QEMU_ARCH_$(ARCH)) +QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) # QEMU_ARGS : some arch-specific args to pass to qemu QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
@@ -67,7 +88,7 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_EXTRA) +QEMU_ARGS = $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_EXTRA) # OUTPUT is only set when run from the main makefile, otherwise # it defaults to this nolibc directory.
@@ -84,7 +105,7 @@ CFLAGS_mips = -EL CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all)) CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \ $(call cc-option,-fno-stack-protector) \ - $(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR) + $(CFLAGS_$(XARCH)) $(CFLAGS_STACKPROTECTOR) LDFLAGS := -s REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \
@@ -99,24 +120,25 @@ help: @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" @echo " libc-test build an executable using the compiler's default libc instead" - @echo " run-user runs the executable under QEMU (uses \$$ARCH, \$$TEST)" + @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" @echo " initramfs prepare the initramfs with nolibc-test" - @echo " defconfig create a fresh new default config (uses \$$ARCH)" - @echo " kernel (re)build the kernel with the initramfs (uses \$$ARCH)" - @echo " run runs the kernel in QEMU after building it (uses \$$ARCH, \$$TEST)" - @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$ARCH, \$$TEST)" + @echo " defconfig create a fresh new default config (uses \$$XARCH)" + @echo " kernel (re)build the kernel with the initramfs (uses \$$XARCH)" + @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" + @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" @echo " clean clean the sysroot, initramfs, build and output files" @echo "" @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." @echo "" @echo "Currently using the following variables:" @echo " ARCH = $(ARCH)" + @echo " XARCH = $(XARCH)" @echo " CROSS_COMPILE = $(CROSS_COMPILE)" @echo " CC = $(CC)" @echo " OUTPUT = $(OUTPUT)" @echo " TEST = $(TEST)" - @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$ARCH]" - @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$ARCH]" + @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" @echo "" all: run
Signature · 1 line
2.25.1
PATCH v4 6/12 selftests/nolibc: add nolibc-test-config target
In reply to Zhangjin WuThe default DEFCONFIG_<XARCH> of some architectures may not just work for nolibc test, some require extra kernel config options to enable features like console for print.
To make nolibc-test happy, a new nolibc-test-config target is added with a new NOLIBC_TEST_CONFIG macro. The macro allows store extra common options via nolibc-test-common.config and the ones by architecture (or variant) via nolibc-test-$(XARCH).config.
During the nolibc-test-config target, the above extra options will be appended to .config generated by the old DEFCONFIG_<XARCH> target or by another config target specified via the CONFIG variable (e.g. tinyconfig). At last, the 'allnoconfig' target is called with the .config as the base to let them take effect and let new missing symbols as no.
The scripts/kconfig/merge_config.sh tool is used to merge the extra config files listed in NOLIBC_TEST_CONFIG.
--- tools/testing/selftests/nolibc/Makefile | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
tools/testing/selftests/nolibc/Makefile +20 -2
@@ -63,6 +63,10 @@ DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig DEFCONFIG = $(DEFCONFIG_$(XARCH)) +# extra configs/ files appended to .config during the nolibc-test-config target +# include common + architecture specific +NOLIBC_TEST_CONFIG = nolibc-test-common.config nolibc-test-$(XARCH).config + # optional tests to run (default = all) TEST =
@@ -192,8 +196,22 @@ MAKE_KERNEL = $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROS KERNEL_CONFIG = $(objtree)/.config KERNEL_IMAGE = $(objtree)/$(IMAGE) -defconfig: - $(Q)$(MAKE_KERNEL) mrproper $(DEFCONFIG) prepare +# kernel config for nolibc-test +# +# - delete the current configuration and all generated files via 'mrproper' target +# - generate .config via '$(CONFIG)' or '$(DEFCONFIG_$(XARCH))' target +# - merge extra config options from $(NOLIBC_TEST_CONFIG) files to .config +# - use merged .config as base and fills in any missing symbols with '# CONFIG_* is not set' via 'allnoconfig' target +# - prepare things we need to do before we recursively start building the kernel via 'prepare' target +# +nolibc-test-config: + $(Q)$(MAKE_KERNEL) mrproper + $(Q)$(MAKE_KERNEL) $(or $(CONFIG),$(DEFCONFIG)) + $(Q)$(srctree)/scripts/kconfig/merge_config.sh -Q -O "$(objtree)" -m "$(KERNEL_CONFIG)" $(foreach c,$(NOLIBC_TEST_CONFIG),$(wildcard $(CURDIR)/configs/$c)) + $(Q)$(MAKE_KERNEL) KCONFIG_ALLCONFIG=$(KERNEL_CONFIG) allnoconfig + $(Q)$(MAKE_KERNEL) prepare + +defconfig: nolibc-test-config kernel: initramfs $(Q)$(MAKE_KERNEL) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs
Signature · 1 line
2.25.1
PATCH v4 7/12 selftests/nolibc: add help for nolibc-test-config target
In reply to Zhangjin WuBoth the nolibc-test-config target and the NOLIBC_TEST_CONFIG marco are listed in the help output.
--- tools/testing/selftests/nolibc/Makefile | 42 +++++++++++++------------ 1 file changed, 22 insertions(+), 20 deletions(-)
tools/testing/selftests/nolibc/Makefile +22 -20
@@ -119,30 +119,32 @@ REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++ help: @echo "Supported targets under selftests/nolibc:" - @echo " all call the \"run\" target below" - @echo " help this help" - @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" - @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" - @echo " libc-test build an executable using the compiler's default libc instead" - @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" - @echo " initramfs prepare the initramfs with nolibc-test" - @echo " defconfig create a fresh new default config (uses \$$XARCH)" - @echo " kernel (re)build the kernel with the initramfs (uses \$$XARCH)" - @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" - @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" - @echo " clean clean the sysroot, initramfs, build and output files" + @echo " all call the \"run\" target below" + @echo " help this help" + @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" + @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" + @echo " libc-test build an executable using the compiler's default libc instead" + @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" + @echo " initramfs prepare the initramfs with nolibc-test" + @echo " nolibc-test-config create a fresh new \$$(CONFIG) config with extra options from \$$NOLIBC_TEST_CONFIG files (uses \$$XARCH)" + @echo " defconfig do nolibc-test-config with default config (uses \$$XARCH)" + @echo " kernel (re)build the kernel with the initramfs (uses \$$XARCH)" + @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" + @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" + @echo " clean clean the sysroot, initramfs, build and output files" @echo "" @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." @echo "" @echo "Currently using the following variables:" - @echo " ARCH = $(ARCH)" - @echo " XARCH = $(XARCH)" - @echo " CROSS_COMPILE = $(CROSS_COMPILE)" - @echo " CC = $(CC)" - @echo " OUTPUT = $(OUTPUT)" - @echo " TEST = $(TEST)" - @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" - @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " ARCH = $(ARCH)" + @echo " XARCH = $(XARCH)" + @echo " CROSS_COMPILE = $(CROSS_COMPILE)" + @echo " CC = $(CC)" + @echo " OUTPUT = $(OUTPUT)" + @echo " TEST = $(TEST)" + @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " NOLIBC_TEST_CONFIG = $(strip $(foreach c,$(NOLIBC_TEST_CONFIG),$(wildcard $(CURDIR)/configs/$c))) [determined from \$$XARCH]" @echo "" all: run
Signature · 1 line
2.25.1
PATCH v4 8/12 selftests/nolibc: add test support for ppc
In reply to Zhangjin WuKernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a ppc variant for 32-bit PowerPC and uses it as the default variant of powerpc architecture.
Users can pass ARCH=powerpc or XARCH=ppc to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit powerpc kernel.
The pmac32_defconfig is used with extra PMACZILOG console options to enable normal print.
Note, zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are overlapping" error, so, vmlinux is used instead.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powermac.html
--- tools/testing/selftests/nolibc/Makefile | 6 ++++++ .../testing/selftests/nolibc/configs/nolibc-test-ppc.config | 3 +++ 2 files changed, 9 insertions(+) create mode 100644 tools/testing/selftests/nolibc/configs/nolibc-test-ppc.config
tools/testing/selftests/nolibc/Makefile +6 -0
@@ -33,9 +33,11 @@ endif # architectures where both are equal. # configure default variants for target kernel supported architectures +XARCH_powerpc = ppc XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) # map from user input variants to their kernel supported architectures +ARCH_ppc = powerpc ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) # kernel image names by architecture
@@ -45,6 +47,7 @@ IMAGE_x86 = arch/x86/boot/bzImage IMAGE_arm64 = arch/arm64/boot/Image IMAGE_arm = arch/arm/boot/zImage IMAGE_mips = vmlinuz +IMAGE_ppc = vmlinux IMAGE_riscv = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi
@@ -58,6 +61,7 @@ DEFCONFIG_x86 = defconfig DEFCONFIG_arm64 = defconfig DEFCONFIG_arm = multi_v7_defconfig DEFCONFIG_mips = malta_defconfig +DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_riscv = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig
@@ -77,6 +81,7 @@ QEMU_ARCH_x86 = x86_64 QEMU_ARCH_arm64 = aarch64 QEMU_ARCH_arm = arm QEMU_ARCH_mips = mipsel # works with malta_defconfig +QEMU_ARCH_ppc = ppc QEMU_ARCH_riscv = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64
@@ -89,6 +94,7 @@ QEMU_ARGS_x86 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $( QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
tools/testing/selftests/nolibc/configs/nolibc-test-ppc.config new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y
Signature · 1 line
2.25.1
PATCH v4 8/12 selftests/nolibc: add test support for ppc
Hi, Willy, Thomas
Yuan is helping me to test this series and the tinyconfig series with the latest compilers.
His first test found this ppc support failed with stackprotector when using a newer compiler (I used an older compiler without stackprotector for ppc), I'm debugging it, so, please ignore this revision too, of course, if time allows, welcome to take a look at the other patches.
His other tests are trying to find out the exact poweroff support options for every architecture one by one, let's fill this gap ...
Thanks,
Zhangjin
Quoted 86 lines
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a ppc variant for 32-bit PowerPC and uses it as the default variant of powerpc architecture.
Users can pass ARCH=powerpc or XARCH=ppc to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit powerpc kernel.
The
pmac32_defconfigis used with extra PMACZILOG console options to enable normal print.Note, zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are overlapping" error, so, vmlinux is used instead.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powermac.html
Suggested-by Willy Tarreau <[email protected]>Reviewed-by Thomas Weißschuh <[email protected]>Signed-off-by Zhangjin Wu <[email protected]>--- tools/testing/selftests/nolibc/Makefile | 6 ++++++ .../testing/selftests/nolibc/configs/nolibc-test-ppc.config | 3 +++ 2 files changed, 9 insertions(+) create mode 100644 tools/testing/selftests/nolibc/configs/nolibc-test-ppc.configtools/testing/selftests/nolibc/Makefile +6
-0@@ -33,9 +33,11 @@ endif # architectures where both are equal. # configure default variants for target kernel supported architectures +XARCH_powerpc = ppc XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) # map from user input variants to their kernel supported architectures +ARCH_ppc = powerpc ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) # kernel image names by architecture@@ -45,6 +47,7 @@ IMAGE_x86 = arch/x86/boot/bzImage IMAGE_arm64 = arch/arm64/boot/Image IMAGE_arm = arch/arm/boot/zImage IMAGE_mips = vmlinuz +IMAGE_ppc = vmlinux IMAGE_riscv = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi@@ -58,6 +61,7 @@ DEFCONFIG_x86 = defconfig DEFCONFIG_arm64 = defconfig DEFCONFIG_arm = multi_v7_defconfig DEFCONFIG_mips = malta_defconfig +DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_riscv = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig@@ -77,6 +81,7 @@ QEMU_ARCH_x86 = x86_64 QEMU_ARCH_arm64 = aarch64 QEMU_ARCH_arm = arm QEMU_ARCH_mips = mipsel # works with malta_defconfig +QEMU_ARCH_ppc = ppc QEMU_ARCH_riscv = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64@@ -89,6 +94,7 @@ QEMU_ARGS_x86 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $( QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"tools/testing/selftests/nolibc/configs/nolibc-test-ppc.config new file +3
-0@@ -0,0 +1,3 @@ +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=ySignature · 1 line
2.25.1
Willy Tarreau
maintainerRe: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Hi Zhangjin,
Quoted 5 lines · Zhangjin Wu
Hi, Willy, Thomas
Yuan is helping me to test this series and the tinyconfig series with the latest compilers.
Quoted 7 lines
His first test found this ppc support failed with stackprotector when using a newer compiler (I used an older compiler without stackprotector for ppc), I'm debugging it, so, please ignore this revision too, of course, if time allows, welcome to take a look at the other patches.
His other tests are trying to find out the exact poweroff support options for every architecture one by one, let's fill this gap ...
Thanks for notifying us. I strongly suggest that you leave ppc32 aside for now, until the rest is completely validated and merged. It turns out that your willingness to work around some of the oddities met on this one have resulted in a lot of drift away from the "keep it simple" principle and significantly delayed the possibilities to integrate the rest of your work. It would be much saner to only focus on ppc64/ppc64le and figure later how to make ppc32 work (or decide not to support it if it's not worth the effort in the end).
Regards,
willy
Re: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Hi, Willy, Hi Thomas
Good news for us ;-)
Quoted 13 lines
Hi Zhangjin,
Quoted 10 lines · Zhangjin Wu
Hi, Willy, Thomas
Yuan is helping me to test this series and the tinyconfig series with the latest compilers.
His first test found this ppc support failed with stackprotector when using a newer compiler (I used an older compiler without stackprotector for ppc), I'm debugging it, so, please ignore this revision too, of course, if time allows, welcome to take a look at the other patches.
Quoted 5 lines
Quoted 2 lines
His other tests are trying to find out the exact poweroff support options for every architecture one by one, let's fill this gap ...
Thanks for notifying us. I strongly suggest that you leave ppc32 aside for now, until the rest is completely validated and merged. It turns
Thanks very much, but good progress here ;-)
I compared some compilers and at last got the root cause of the ppc32 failure with stackprotector.
//// gcc 13.1.0 from mirrors.edge.kernel.org
$ make run-user XARCH=ppc -j4 CC=/labs/linux-lab/prebuilt/toolchains/ppc64le/gcc-13.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc
...
Segmentation fault (core dumped)
0 test(s): 0 passed, 0 skipped, 0 failed => status: success
See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out
//// gcc 10 from ubuntu ppa
$ make run-user XARCH=ppc -j4 CC=/usr/bin/powerpc-linux-gnu-gcc-10
...
165 test(s): 157 passed, 8 skipped, 0 failed => status: warning
See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out
$ grep stack run.out
0 -fstackprotector [OK]
And then compared the assemblies, found gcc 13.1.0 insert a bad instruction at the beginning of _start() and break our stack eventually.
start:
stwu 1,-16(1) Further compared the preprocessed files, found the root cause is the new compiler using 'no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.
I checked some of the other architectures, they didn't have the same issue, but test shows the 'no_stack_protector' attribute does have such compability issue here.
I learned the commit message of tools/include/nolibc/compiler.h, seems __optimize__("-fno-stack-protector") is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:
#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))Benefit from the __no_stack_protetor macro, we have no need to input __optimize__("-fno-stack-protector") for every new architecture, it may be the time to only use __optimize__("-fno-stack-protector"), am I missing something?
Quoted 6 lines
out that your willingness to work around some of the oddities met on this one have resulted in a lot of drift away from the "keep it simple" principle and significantly delayed the possibilities to integrate the rest of your work. It would be much saner to only focus on ppc64/ppc64le and figure later how to make ppc32 work (or decide not to support it if it's not worth the effort in the end).
Another test shows, the run target of ppc64le with the big endian gcc 13.1.0 toolchain has test startup failure (although we have verified run-user before, run-user ok! and run with local powerpc64le toolchain ok too!), I'm debugging this now, hope it not cost too much.
Another good news is, Yuan has found a working defconfig for ppc32 which has poweroff support and he is helping me narrowing down the exact options, this will eventually make us happy ;-)
Thanks & Best regards,
Zhangjin
Quoted 3 lines
Regards,
willy
Re: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Hi, Willy, Hi Thomas
I'm so happy to share with you, we have solved all of the left found issues, include the ones about ppc and the missing poweroff options for the tinyconfig series, will renew both series ;-)
Quoted 9 lines
Further compared the preprocessed files, found the root cause is the new compiler using '
no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.I checked some of the other architectures, they didn't have the same issue, but test shows the '
no_stack_protector' attribute does have such compability issue here.
Quoted 8 lines
I learned the commit message of
tools/include/nolibc/compiler.h, seems__optimize__("-fno-stack-protector")is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))
Hello, any suggestion here? ;-)
BTW, we have found another -O0 + "omit-frame-pointer" regression with gcc 13.1.0 on all architectures ("omit-frame-pointer" will be completely ignored when -O0 passed whatever other internal optimize attribute like 'Os' we used together in commit '4dc4401991fc' for gcc < 11.1.0), Yuan is doing more tests to confirm it, will open another discussion for it.
Quoted 11 lines
Benefit from the
__no_stack_protetormacro, we have no need to input__optimize__("-fno-stack-protector")for every new architecture, it may be the time to only use__optimize__("-fno-stack-protector"), am I missing something?Quoted 6 lines
out that your willingness to work around some of the oddities met on this one have resulted in a lot of drift away from the "keep it simple" principle and significantly delayed the possibilities to integrate the rest of your work. It would be much saner to only focus on ppc64/ppc64le and figure later how to make ppc32 work (or decide not to support it if it's not worth the effort in the end).
Quoted 4 lines
Another test shows, the run target of ppc64le with the big endian gcc 13.1.0 toolchain has test startup failure (although we have verified run-user before, run-user ok! and run with local powerpc64le toolchain ok too!), I'm debugging this now, hope it not cost too much.
Just solved this, when -mabi=elfv2 supported by the toolchain (gcc 13.1.0 has this option), kernel will compile with this ABI, to align with kernel, our user space application should use -mabi=elfv2 too if toolchain support it, otherwise, test will simply fails at startup, this solves it:
$(call cc-option,-mabi=elfv2)
Quoted 5 lines
Another good news is, Yuan has found a working defconfig for ppc32 which has poweroff support and he is helping me narrowing down the exact options, this will eventually make us happy ;-)
We eventually find the missing poweroff option for ppc32, will update the patches with them.
we also found such options for all of the nolibc supported architectures, will add them in their tinyconfig support patches.
Thanks,
Zhangjin
Quoted 6 lines
Thanks & Best regards,
ZhangjinQuoted 3 lines
Regards,
willy
Re: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Quoted 5 lines · Zhangjin Wu
Hi, Willy, Hi Thomas
I'm so happy to share with you, we have solved all of the left found issues, include the ones about ppc and the missing poweroff options for the tinyconfig series, will renew both series ;-)
Can we stick to one series at a time?
Quoted 15 lines
Quoted 15 lines
Further compared the preprocessed files, found the root cause is the new compiler using '
no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.I checked some of the other architectures, they didn't have the same issue, but test shows the '
no_stack_protector' attribute does have such compability issue here.I learned the commit message of
tools/include/nolibc/compiler.h, seems__optimize__("-fno-stack-protector")is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:
Quoted 4 lines
Quoted 2 lines
#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))Hello, any suggestion here? ;-)
Patience :-)
no_stack_protector is the offically documented mechanism to disable stack protector for a function. As it works for all other architectures this seems like a compiler bug.
If we want to work around it I would prefer to have both attributes.
Quoted 1 line
[..]
Thomas
Willy Tarreau
maintainerRe: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Quoted 8 lines · Thomas Weißschuh
Quoted 5 lines · Zhangjin Wu
Hi, Willy, Hi Thomas
I'm so happy to share with you, we have solved all of the left found issues, include the ones about ppc and the missing poweroff options for the tinyconfig series, will renew both series ;-)
Can we stick to one series at a time?
Yes and please this time, let's stick exclusively to what is sufficiently tested for 6.6, otherwise it will have to be delayed.
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
Further compared the preprocessed files, found the root cause is the new compiler using '
no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.I checked some of the other architectures, they didn't have the same issue, but test shows the '
no_stack_protector' attribute does have such compability issue here.I learned the commit message of
tools/include/nolibc/compiler.h, seems__optimize__("-fno-stack-protector")is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))
Quoted 7 lines
Quoted 1 line
Hello, any suggestion here? ;-)
Patience :-)
no_stack_protectoris the offically documented mechanism to disable stack protector for a function. As it works for all other architectures this seems like a compiler bug.
Or a limitation. To be honest we're playing with compiler limits by adjusting their optimizations per function. But as long as we don't break what currently works, we can accept to have some limits in a first version (e.g. if ppc32 doesn't support -O0 for now it's not dramatic). Also, some other archs use optimize("Os", "omit-frame-pointer")), maybe that's needed there as well.
Quoted 1 line
If we want to work around it I would prefer to have both attributes.
Also if you remember we also used to have a work-around for the function's entry code consisting in renaming _start and having a _start pointer in the asm code itself. That can remain an option to experiment with later. But let's not change everything again at the last minute, all these series have been sufficiently difficult to follow :-(
thanks,
Willy
Re: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Hi,
Quoted 13 lines · Thomas Wei�schuh
Quoted 8 lines · Zhangjin Wu
Quoted 5 lines
Hi, Willy, Hi Thomas
I'm so happy to share with you, we have solved all of the left found issues, include the ones about ppc and the missing poweroff options for the tinyconfig series, will renew both series ;-)
Can we stick to one series at a time?
Yes and please this time, let's stick exclusively to what is sufficiently tested for 6.6, otherwise it will have to be delayed.
Yes, ppc series at first, will renew it today. let's delay the whole tinyconfig series (include part1) in v6.7, we have no enough time to test them carefully for v6.6.
Quoted 26 lines
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
Further compared the preprocessed files, found the root cause is the new compiler using '
no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.I checked some of the other architectures, they didn't have the same issue, but test shows the '
no_stack_protector' attribute does have such compability issue here.I learned the commit message of
tools/include/nolibc/compiler.h, seems__optimize__("-fno-stack-protector")is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))Quoted 7 lines
Quoted 1 line
Hello, any suggestion here? ;-)
Patience :-)
no_stack_protectoris the offically documented mechanism to disable stack protector for a function. As it works for all other architectures this seems like a compiler bug.
Quoted 7 lines
Or a limitation. To be honest we're playing with compiler limits by adjusting their optimizations per function. But as long as we don't break what currently works, we can accept to have some limits in a first version (e.g. if ppc32 doesn't support -O0 for now it's not dramatic). Also, some other archs use
optimize("Os", "omit-frame-pointer")), maybe that's needed there as well.
Since it is really related, let's summarize yesterdays's further test here for a reference:
Yesterday's test result on randomly chosen x86_64 and riscv64 shows, from at least gcc 12.3.0 (may differs from archs), even with optimize("Os", "omit-frame-pointer")), whatever with or without '-fno-stack-protector', -O0 forbids the per function's "omit-frame-pointer" as the doc [1] describes (as we discussed before), that means some imtermediate gcc versions deviate from their docs and now, the latest gcc version come back to follow its doc [1] and become even more strict and then breaks our optimize("Os", "omit-frame-pointer") workaround eventually:
Most optimizations are completely disabled at -O0 or if an -O level is not set on the command line, even if individual optimization flags are specified.
So, it is ok for us to simply ignore -O0 currently, let's work on them in v6.7.
[1]: https://gcc.gnu.org/onlinedocs/gcc-13.1.0/gcc/Optimize-Options.html
Quoted 6 lines
Quoted 1 line
If we want to work around it I would prefer to have both attributes.
Also if you remember we also used to have a work-around for the function's entry code consisting in renaming
_startand having a_startpointer in the asm code itself. That can remain an option to experiment with later.
Yes, the 'asm' style of _start may be a choice to prevent gcc touching our startup code.
Quoted 1 line
But let's not change everything again at the last minute,
It is reasonable.
Quoted 2 lines
all these series have been sufficiently difficult to follow :-(
Thanks,
Zhangjin
Quoted 2 lines
thanks,
Willy
Willy Tarreau
maintainerRe: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
Quoted 3 lines · Zhangjin Wu
Yes, ppc series at first, will renew it today. let's delay the whole tinyconfig series (include part1) in v6.7, we have no enough time to test them carefully for v6.6.
Thanks.
Quoted 47 lines
Quoted 26 lines
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
Further compared the preprocessed files, found the root cause is the new compiler using '
no_stack_protector' instead of '__optimize__("-fno-stack-protector")'. And the attribute 'no_stack_protector' breaks our "omit-frame-pointer" like the failure with '-O0' we fixed before.I checked some of the other architectures, they didn't have the same issue, but test shows the '
no_stack_protector' attribute does have such compability issue here.I learned the commit message of
tools/include/nolibc/compiler.h, seems__optimize__("-fno-stack-protector")is enough for all of the nolibc supported architectures? is it ok for us to simply give up 'no_stack_protector' eventully? otherwise, we should manually disable 'no_stack_protector' for ppc32:#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))Quoted 7 lines
Quoted 1 line
Hello, any suggestion here? ;-)
Patience :-)
no_stack_protectoris the offically documented mechanism to disable stack protector for a function. As it works for all other architectures this seems like a compiler bug.Quoted 7 lines
Or a limitation. To be honest we're playing with compiler limits by adjusting their optimizations per function. But as long as we don't break what currently works, we can accept to have some limits in a first version (e.g. if ppc32 doesn't support -O0 for now it's not dramatic). Also, some other archs use
optimize("Os", "omit-frame-pointer")), maybe that's needed there as well.Since it is really related, let's summarize yesterdays's further test here for a reference:
Yesterday's test result on randomly chosen
x86_64and riscv64 shows, from at least gcc 12.3.0 (may differs from archs), even withoptimize("Os", "omit-frame-pointer")), whatever with or without '-fno-stack-protector', -O0 forbids the per function's "omit-frame-pointer" as the doc [1] describes (as we discussed before), that means some imtermediate gcc versions deviate from their docs and now, the latest gcc version come back to follow its doc [1] and become even more strict and then breaks ouroptimize("Os", "omit-frame-pointer")workaround eventually:
Quoted 3 lines
Most optimizations are completely disabled at -O0 or if an -O level is not set on the command line, even if individual optimization flags are specified.
Note that the quoted paragraph above is mostly independent. The point here is that optimize("-Os") seems to be ignored then -O0 is passed on the command line. But I'm not that much surprised, because as we said, changing optimizations on the fly is tricky given that some have effects beyond just a function.
Quoted 2 lines
So, it is ok for us to simply ignore -O0 currently, let's work on them in v6.7.
Yeah I'm fine with this. In the worst case those using -O0 can also avoid using stack-protector.
Quoted 9 lines
Quoted 6 lines
Quoted 1 line
If we want to work around it I would prefer to have both attributes.
Also if you remember we also used to have a work-around for the function's entry code consisting in renaming
_startand having a_startpointer in the asm code itself. That can remain an option to experiment with later.Yes, the 'asm' style of
_startmay be a choice to prevent gcc touching our startup code.
That was the case. We had an earlier version where _start was a label inside the asm statement, resulting in some unused prologue and epilogue for the function around that code. It was a bit ugly and I think it had some shortcomings but we may go back to that later if it brings some value.
Willy
Re: [PATCH v4 08/12] selftests/nolibc: add test support for ppc
In reply to Willy TarreauHi, Willy
Quoted 7 lines · Zhangjin Wu
Quoted 3 lines
Yes, ppc series at first, will renew it today. let's delay the whole tinyconfig series (include part1) in v6.7, we have no enough time to test them carefully for v6.6.
Thanks.
To even further simplify the ppc series merge progress, since Yuan have helped me sending the standalone serial console enable patch for pmac32_defconfig [1], and it has gotten a Reviewed-by line from the ppc maintainer, perhaps we can safely expect it in v6.6, so, I plan to delay the nolibc-test-config related stuff and minimize the whole ppc series to only these necessary patches:
$ git log --reverse --oneline 813cab75752d9f2bbd71179b0c43c1052515cf48^..HEAD
813cab75752d tools/nolibc: add support for powerpc
122e2610c649 tools/nolibc: add support for powerpc64
f31fe18cf2e2 selftests/nolibc: add XARCH and ARCH mapping support
b25c71125154 selftests/nolibc: add test support for ppc
27bc0026f1e7 selftests/nolibc: add test support for ppc64le
d70649478ef8 (HEAD -> v6.6-nolibc-202308031233-pure-ppc-v5) selftests/nolibc: add test support for ppc64After this ppc series, if you are still happy with parts of the left ones, I will renew them.
Quoted 8 lines
[...]
Quoted 2 lines
So, it is ok for us to simply ignore -O0 currently, let's work on them in v6.7.
Yeah I'm fine with this. In the worst case those using -O0 can also avoid using stack-protector.
Yeah, let's ignore -O0 here.
but must clarify that, even with the default "-Os" from command line, when using gcc 13.1.0, it has '__no_stack_protector' attribute but this attribute breaks 'omit-frame-pointer' and result in segfaults. To avoid touching the common code, I plan to let ppc32 uses its own __no_stack_protector with '__optimize__("-fno-stack-protector")', I hope it is fair enough now ;-)
Here is what I have added for arch-powerpc.h in the first patch of the series:
/* FIXME: For ppc32, with newer gcc compilers (e.g. gcc 13.1.0),
* "omit-frame-pointer" fails with __attribute__((no_stack_protector)) but
* works with __attribute__((__optimize__("-fno-stack-protector")))
*/
#ifdef __no_stack_protector
#undef __no_stack_protector
#define __no_stack_protector __attribute__((__optimize__("-fno-stack-protector")))
#endifIf you are happy with this, v5 with come with it.
Thanks!
Best regards,
Zhangjin
Quoted 2 lines
Willy
PATCH v4 9/12 selftests/nolibc: add test support for ppc64le
In reply to Zhangjin WuKernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a ppc64le variant for little endian 64-bit PowerPC, users can pass XARCH=ppc64le to test it.
The powernv machine of qemu-system-ppc64le is used for there is just a working powernv_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be used as an hypervisor OS, running KVM guests, or simply as a host OS.
Note, since the VSX support may be disabled in kernel side, to avoid "illegal instruction" errors due to missing VSX kernel support, let's simply let compiler not generate vector/scalar (VSX) instructions via the '-mno-vsx' option.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
--- tools/testing/selftests/nolibc/Makefile | 6 ++++++ 1 file changed, 6 insertions(+)
tools/testing/selftests/nolibc/Makefile +6 -0
@@ -38,6 +38,7 @@ XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) # map from user input variants to their kernel supported architectures ARCH_ppc = powerpc +ARCH_ppc64le = powerpc ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) # kernel image names by architecture
@@ -48,6 +49,7 @@ IMAGE_arm64 = arch/arm64/boot/Image IMAGE_arm = arch/arm/boot/zImage IMAGE_mips = vmlinuz IMAGE_ppc = vmlinux +IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi
@@ -62,6 +64,7 @@ DEFCONFIG_arm64 = defconfig DEFCONFIG_arm = multi_v7_defconfig DEFCONFIG_mips = malta_defconfig DEFCONFIG_ppc = pmac32_defconfig +DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig
@@ -82,6 +85,7 @@ QEMU_ARCH_arm64 = aarch64 QEMU_ARCH_arm = arm QEMU_ARCH_mips = mipsel # works with malta_defconfig QEMU_ARCH_ppc = ppc +QEMU_ARCH_ppc64le = ppc64le QEMU_ARCH_riscv = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64
@@ -95,6 +99,7 @@ QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
@@ -110,6 +115,7 @@ else Q=@ endif +CFLAGS_ppc64le = -m64 -mlittle-endian -Wl,-EL,-melf64ppc -mno-vsx CFLAGS_s390 = -m64 CFLAGS_mips = -EL CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all))
Signature · 1 line
2.25.1
PATCH v4 10/12 selftests/nolibc: add test support for ppc64
In reply to Zhangjin WuKernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a ppc64 variant for big endian 64-bit PowerPC, users can pass ARCH=ppc64 to test it.
The powernv machine of qemu-system-ppc64 is used with powernv_be_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- differs from little endian 64-bit PowerPC, vmlinux is used instead of zImage, because big endian zImage [2] only boot on qemu with x-vof=on (added from qemu v7.0) and a fixup patch [3] for qemu v7.0.51:
- since the VSX support may be disabled in kernel side, to avoid "illegal instruction" errors due to missing VSX kernel support, let's simply let compiler not generate vector/scalar (VSX) instructions via the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses the load multiple word instructions and the store multiple word instructions. Those instructions do not work when the processor is in little-endian mode (except PPC740/PPC750), so, we only enable it for big endian powerpc.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
[2]: https://github.com/linuxppc/issues/issues/402
[3]: https://lore.kernel.org/qemu-devel/[email protected]/
--- tools/testing/selftests/nolibc/Makefile | 6 ++++++ 1 file changed, 6 insertions(+)
tools/testing/selftests/nolibc/Makefile +6 -0
@@ -38,6 +38,7 @@ XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) # map from user input variants to their kernel supported architectures ARCH_ppc = powerpc +ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH := $(or $(ARCH_$(XARCH)),$(XARCH))
@@ -49,6 +50,7 @@ IMAGE_arm64 = arch/arm64/boot/Image IMAGE_arm = arch/arm/boot/zImage IMAGE_mips = vmlinuz IMAGE_ppc = vmlinux +IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage
@@ -64,6 +66,7 @@ DEFCONFIG_arm64 = defconfig DEFCONFIG_arm = multi_v7_defconfig DEFCONFIG_mips = malta_defconfig DEFCONFIG_ppc = pmac32_defconfig +DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig DEFCONFIG_s390 = defconfig
@@ -85,6 +88,7 @@ QEMU_ARCH_arm64 = aarch64 QEMU_ARCH_arm = arm QEMU_ARCH_mips = mipsel # works with malta_defconfig QEMU_ARCH_ppc = ppc +QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64le QEMU_ARCH_riscv = riscv64 QEMU_ARCH_s390 = s390x
@@ -99,6 +103,7 @@ QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
@@ -115,6 +120,7 @@ else Q=@ endif +CFLAGS_ppc64 = -m64 -mbig-endian -Wl,-EB,-melf64ppc -mmultiple -mno-vsx CFLAGS_ppc64le = -m64 -mlittle-endian -Wl,-EL,-melf64ppc -mno-vsx CFLAGS_s390 = -m64 CFLAGS_mips = -EL
Signature · 1 line
2.25.1
PATCH v4 11/12 selftests/nolibc: allow customize CROSS_COMPILE by architecture
In reply to Zhangjin WuSome cross compilers may not just be prefixed with ARCH, customize them by architecture may simplify the test a lot, especially, when iterate with ARCH.
After customizing this for every architecture, the minimal test argument will be architecture itself, no CROSS_COMPILE required to be passed.
If the prefix of installed cross compiler is not the same as the one customized, we can also pass CROSS_COMPILE as before or even pass CROSS_COMPILE_<ARCH>.
--- tools/testing/selftests/nolibc/Makefile | 6 ++++++ 1 file changed, 6 insertions(+)
tools/testing/selftests/nolibc/Makefile +6 -0
@@ -58,6 +58,12 @@ IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi IMAGE = $(IMAGE_$(XARCH)) IMAGE_NAME = $(notdir $(IMAGE)) +# CROSS_COMPILE: cross toolchain prefix by architecture +CROSS_COMPILE ?= $(CROSS_COMPILE_$(XARCH)) + +# make sure CC is prefixed with CROSS_COMPILE +$(call allow-override,CC,$(CROSS_COMPILE)gcc) + # default kernel configurations that appear to be usable DEFCONFIG_i386 = defconfig DEFCONFIG_x86_64 = defconfig
Signature · 1 line
2.25.1
PATCH v4 12/12 selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc
In reply to Zhangjin WuThe little-endian powerpc64le compilers provided by Ubuntu and Fedora are able to compile big endian kernel and big endian nolibc-test [1].
These default CROSS_COMPILE settings allow to test target architectures with:
$ cd /path/to/tools/testing/selftests/nolibc/
$ for arch in ppc ppc64 ppc64le; do \
make run-user ARCH=$arch | grep "status: "; \
doneIf want to use another cross compiler, please simply pass CROSS_COMPILE or CC as before.
For example, it is able to build 64-bit nolibc-test with the big endian powerpc64-linux-gcc crosstool from [2]:
$ wget -c https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.1.0/x86_64-gcc-13.1.0-nolibc-powerpc64-linux.tar.xz $ tar xvf x86_64-gcc-13.1.0-nolibc-powerpc64-linux.tar.xz $ export PATH=$PWD/gcc-13.1.0-nolibc/powerpc64-linux/bin/:$PATH
$ export CROSS_COMPILE_ppc64=powerpc64-linux-
$ export CROSS_COMPILE_ppc64le=powerpc64-linux-
$ for arch in ppc64 ppc64le; do \
make run-user ARCH=$arch | grep "status: "; \
doneOr specify CC directly with full path:
$ export CC=$PWD/gcc-13.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc
$ for arch in ppc64 ppc64le; do \
make run-user ARCH=$arch | grep "status: "; \
done[1]: https://github.com/open-power/skiboot
[2]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
--- tools/testing/selftests/nolibc/Makefile | 3 +++ 1 file changed, 3 insertions(+)
tools/testing/selftests/nolibc/Makefile +3 -0
@@ -59,6 +59,9 @@ IMAGE = $(IMAGE_$(XARCH)) IMAGE_NAME = $(notdir $(IMAGE)) # CROSS_COMPILE: cross toolchain prefix by architecture +CROSS_COMPILE_ppc ?= powerpc-linux-gnu- +CROSS_COMPILE_ppc64 ?= powerpc64le-linux-gnu- +CROSS_COMPILE_ppc64le ?= powerpc64le-linux-gnu- CROSS_COMPILE ?= $(CROSS_COMPILE_$(XARCH)) # make sure CC is prefixed with CROSS_COMPILE
Signature · 1 line
2.25.1