Improve pwm-ir-tx precision

index 2e8f17c04522..ff9b9918b0a1 100644
@@ -274,7 +274,7 @@ static void ext_pwm_set_backlight(const struct drm_connector_state *conn_state,
 	struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel;
 
 	pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100);
-	pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state);
+	pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state);
 }
 
 static void

@@ -427,7 +427,7 @@ static void ext_pwm_disable_backlight(const struct drm_connector_state *old_conn
 	intel_backlight_set_pwm_level(old_conn_state, level);
 
 	panel->backlight.pwm_state.enabled = false;
-	pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state);
+	pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state);
 }
 
 void intel_backlight_disable(const struct drm_connector_state *old_conn_state)

@@ -749,7 +749,7 @@ static void ext_pwm_enable_backlight(const struct intel_crtc_state *crtc_state,
 
 	pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100);
 	panel->backlight.pwm_state.enabled = true;
-	pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state);
+	pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state);
 }
 
 static void __intel_backlight_enable(const struct intel_crtc_state *crtc_state,

index e0174f82e353..cce043a4a1dc 100644
@@ -319,7 +319,7 @@ static int ssd130x_pwm_enable(struct ssd130x_device *ssd130x)
 
 	pwm_init_state(ssd130x->pwm, &pwmstate);
 	pwm_set_relative_duty_cycle(&pwmstate, 50, 100);
-	pwm_apply_state(ssd130x->pwm, &pwmstate);
+	pwm_apply_might_sleep(ssd130x->pwm, &pwmstate);
 
 	/* Enable the PWM */
 	pwm_enable(ssd130x->pwm);

index 6e4516c2ab89..b67bc9e833c0 100644
@@ -151,7 +151,7 @@ static int pwm_fan_power_on(struct pwm_fan_ctx *ctx)
 	}
 
 	state->enabled = true;
-	ret = pwm_apply_state(ctx->pwm, state);
+	ret = pwm_apply_might_sleep(ctx->pwm, state);
 	if (ret) {
 		dev_err(ctx->dev, "failed to enable PWM\n");
 		goto disable_regulator;

@@ -181,7 +181,7 @@ static int pwm_fan_power_off(struct pwm_fan_ctx *ctx)
 
 	state->enabled = false;
 	state->duty_cycle = 0;
-	ret = pwm_apply_state(ctx->pwm, state);
+	ret = pwm_apply_might_sleep(ctx->pwm, state);
 	if (ret) {
 		dev_err(ctx->dev, "failed to disable PWM\n");
 		return ret;

@@ -207,7 +207,7 @@ static int  __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
 
 		period = state->period;
 		state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
-		ret = pwm_apply_state(ctx->pwm, state);
+		ret = pwm_apply_might_sleep(ctx->pwm, state);
 		if (ret)
 			return ret;
 		ret = pwm_fan_power_on(ctx);

@@ -278,7 +278,7 @@ static int pwm_fan_update_enable(struct pwm_fan_ctx *ctx, long val)
 						    state,
 						    &enable_regulator);
 
-			pwm_apply_state(ctx->pwm, state);
+			pwm_apply_might_sleep(ctx->pwm, state);
 			pwm_fan_switch_power(ctx, enable_regulator);
 			pwm_fan_update_state(ctx, 0);
 		}

index ce82548916bb..c1fa75c0f970 100644
@@ -352,7 +352,7 @@ static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled)
 		state.duty_cycle = period_mag_multi;
 	}
 
-	error = pwm_apply_state(haptics->pwm_dev, &state);
+	error = pwm_apply_might_sleep(haptics->pwm_dev, &state);
 	if (error)
 		dev_err(haptics->dev, "Failed to apply pwm state: %d\n", error);
 

@@ -1175,7 +1175,7 @@ static int da7280_probe(struct i2c_client *client)
 		/* Sync up PWM state and ensure it is off. */
 		pwm_init_state(haptics->pwm_dev, &state);
 		state.enabled = false;
-		error = pwm_apply_state(haptics->pwm_dev, &state);
+		error = pwm_apply_might_sleep(haptics->pwm_dev, &state);
 		if (error) {
 			dev_err(dev, "Failed to apply PWM state: %d\n", error);
 			return error;

index 1e731d8397c6..5b9aedf4362f 100644
@@ -39,7 +39,7 @@ static int pwm_beeper_on(struct pwm_beeper *beeper, unsigned long period)
 	state.period = period;
 	pwm_set_relative_duty_cycle(&state, 50, 100);
 
-	error = pwm_apply_state(beeper->pwm, &state);
+	error = pwm_apply_might_sleep(beeper->pwm, &state);
 	if (error)
 		return error;
 

@@ -138,7 +138,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
 	/* Sync up PWM state and ensure it is off. */
 	pwm_init_state(beeper->pwm, &state);
 	state.enabled = false;
-	error = pwm_apply_state(beeper->pwm, &state);
+	error = pwm_apply_might_sleep(beeper->pwm, &state);
 	if (error) {
 		dev_err(dev, "failed to apply initial PWM state: %d\n",
 			error);

index acac79c488aa..3e5ed685ed8f 100644
@@ -56,7 +56,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 	pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
 	state.enabled = true;
 
-	err = pwm_apply_state(vibrator->pwm, &state);
+	err = pwm_apply_might_sleep(vibrator->pwm, &state);
 	if (err) {
 		dev_err(pdev, "failed to apply pwm state: %d\n", err);
 		return err;

@@ -67,7 +67,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 		state.duty_cycle = vibrator->direction_duty_cycle;
 		state.enabled = true;
 
-		err = pwm_apply_state(vibrator->pwm_dir, &state);
+		err = pwm_apply_might_sleep(vibrator->pwm_dir, &state);
 		if (err) {
 			dev_err(pdev, "failed to apply dir-pwm state: %d\n", err);
 			pwm_disable(vibrator->pwm);

@@ -160,7 +160,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
 	/* Sync up PWM state and ensure it is off. */
 	pwm_init_state(vibrator->pwm, &state);
 	state.enabled = false;
-	err = pwm_apply_state(vibrator->pwm, &state);
+	err = pwm_apply_might_sleep(vibrator->pwm, &state);
 	if (err) {
 		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 			err);

@@ -174,7 +174,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
 		/* Sync up PWM state and ensure it is off. */
 		pwm_init_state(vibrator->pwm_dir, &state);
 		state.enabled = false;
-		err = pwm_apply_state(vibrator->pwm_dir, &state);
+		err = pwm_apply_might_sleep(vibrator->pwm_dir, &state);
 		if (err) {
 			dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 				err);

index 2b3bf1353b70..4e3936a39d0e 100644
@@ -54,7 +54,7 @@ static int led_pwm_set(struct led_classdev *led_cdev,
 
 	led_dat->pwmstate.duty_cycle = duty;
 	led_dat->pwmstate.enabled = true;
-	return pwm_apply_state(led_dat->pwm, &led_dat->pwmstate);
+	return pwm_apply_might_sleep(led_dat->pwm, &led_dat->pwmstate);
 }
 
 __attribute__((nonnull))

index 46cd062b8b24..e1a81e0109e8 100644
@@ -51,8 +51,8 @@ static int led_pwm_mc_set(struct led_classdev *cdev,
 
 		priv->leds[i].state.duty_cycle = duty;
 		priv->leds[i].state.enabled = duty > 0;
-		ret = pwm_apply_state(priv->leds[i].pwm,
-				      &priv->leds[i].state);
+		ret = pwm_apply_might_sleep(priv->leds[i].pwm,
+					    &priv->leds[i].state);
 		if (ret)
 			break;
 	}

index c5f37c03af9c..cf51e2760975 100644
@@ -68,7 +68,7 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
 
 	for (i = 0; i < count; i++) {
 		state.enabled = !(i % 2);
-		pwm_apply_state(pwm, &state);
+		pwm_apply_might_sleep(pwm, &state);
 
 		edge = ktime_add_us(edge, txbuf[i]);
 		delta = ktime_us_delta(edge, ktime_get());

@@ -77,7 +77,7 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
 	}
 
 	state.enabled = false;
-	pwm_apply_state(pwm, &state);
+	pwm_apply_might_sleep(pwm, &state);
 
 	return count;
 }

index b8d0239192cb..fd62bf746ebd 100644
@@ -435,7 +435,7 @@ static int yogabook_pdev_set_kbd_backlight(struct yogabook_data *data, u8 level)
 		.enabled = level,
 	};
 
-	pwm_apply_state(data->kbd_bl_pwm, &state);
+	pwm_apply_might_sleep(data->kbd_bl_pwm, &state);
 	gpiod_set_value(data->kbd_bl_led_enable, level ? 1 : 0);
 	return 0;
 }

index f60b715abe62..c2d78136625d 100644
@@ -326,8 +326,8 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
 }
 EXPORT_SYMBOL_GPL(pwm_request_from_chip);
 
-static void pwm_apply_state_debug(struct pwm_device *pwm,
-				  const struct pwm_state *state)
+static void pwm_apply_debug(struct pwm_device *pwm,
+			    const struct pwm_state *state)
 {
 	struct pwm_state *last = &pwm->last;
 	struct pwm_chip *chip = pwm->chip;

@@ -433,11 +433,11 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
 }
 
 /**
- * pwm_apply_state() - atomically apply a new state to a PWM device
+ * pwm_apply_might_sleep() - atomically apply a new state to a PWM device
  * @pwm: PWM device
  * @state: new state to apply
  */
-int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state)
 {
 	struct pwm_chip *chip;
 	int err;

@@ -445,7 +445,7 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
 	/*
 	 * Some lowlevel driver's implementations of .apply() make use of
 	 * mutexes, also with some drivers only returning when the new
-	 * configuration is active calling pwm_apply_state() from atomic context
+	 * configuration is active calling pwm_apply_might_sleep() from atomic context
 	 * is a bad idea. So make it explicit that calling this function might
 	 * sleep.
 	 */

@@ -475,11 +475,11 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
 	 * only do this after pwm->state was applied as some
 	 * implementations of .get_state depend on this
 	 */
-	pwm_apply_state_debug(pwm, state);
+	pwm_apply_debug(pwm, state);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(pwm_apply_state);
+EXPORT_SYMBOL_GPL(pwm_apply_might_sleep);
 
 /**
  * pwm_capture() - capture and report a PWM signal

@@ -537,7 +537,7 @@ int pwm_adjust_config(struct pwm_device *pwm)
 		state.period = pargs.period;
 		state.polarity = pargs.polarity;
 
-		return pwm_apply_state(pwm, &state);
+		return pwm_apply_might_sleep(pwm, &state);
 	}
 
 	/*

@@ -560,7 +560,7 @@ int pwm_adjust_config(struct pwm_device *pwm)
 		state.duty_cycle = state.period - state.duty_cycle;
 	}
 
-	return pwm_apply_state(pwm, &state);
+	return pwm_apply_might_sleep(pwm, &state);
 }
 EXPORT_SYMBOL_GPL(pwm_adjust_config);
 

index 8a870d0db3c6..c670ccb81653 100644
@@ -172,7 +172,7 @@ static int twl4030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * We cannot skip calling ->config even if state->period ==
 	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
 	 * because we might have exited early in the last call to
-	 * pwm_apply_state because of !state->enabled and so the two values in
+	 * pwm_apply_might_sleep because of !state->enabled and so the two values in
 	 * pwm->state might not be configured in hardware.
 	 */
 	ret = twl4030_pwmled_config(chip, pwm,

index bdea60389487..7bfeacee05d0 100644
@@ -206,7 +206,7 @@ static int vt8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * We cannot skip calling ->config even if state->period ==
 	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
 	 * because we might have exited early in the last call to
-	 * pwm_apply_state because of !state->enabled and so the two values in
+	 * pwm_apply_might_sleep because of !state->enabled and so the two values in
 	 * pwm->state might not be configured in hardware.
 	 */
 	err = vt8500_pwm_config(chip, pwm, state->duty_cycle, state->period);

index 4edb994fa2e1..1698609d91c8 100644
@@ -62,7 +62,7 @@ static ssize_t period_store(struct device *child,
 	mutex_lock(&export->lock);
 	pwm_get_state(pwm, &state);
 	state.period = val;
-	ret = pwm_apply_state(pwm, &state);
+	ret = pwm_apply_might_sleep(pwm, &state);
 	mutex_unlock(&export->lock);
 
 	return ret ? : size;

@@ -97,7 +97,7 @@ static ssize_t duty_cycle_store(struct device *child,
 	mutex_lock(&export->lock);
 	pwm_get_state(pwm, &state);
 	state.duty_cycle = val;
-	ret = pwm_apply_state(pwm, &state);
+	ret = pwm_apply_might_sleep(pwm, &state);
 	mutex_unlock(&export->lock);
 
 	return ret ? : size;

@@ -144,7 +144,7 @@ static ssize_t enable_store(struct device *child,
 		goto unlock;
 	}
 
-	ret = pwm_apply_state(pwm, &state);
+	ret = pwm_apply_might_sleep(pwm, &state);
 
 unlock:
 	mutex_unlock(&export->lock);

@@ -194,7 +194,7 @@ static ssize_t polarity_store(struct device *child,
 	mutex_lock(&export->lock);
 	pwm_get_state(pwm, &state);
 	state.polarity = polarity;
-	ret = pwm_apply_state(pwm, &state);
+	ret = pwm_apply_might_sleep(pwm, &state);
 	mutex_unlock(&export->lock);
 
 	return ret ? : size;

@@ -401,7 +401,7 @@ static int pwm_class_apply_state(struct pwm_export *export,
 				 struct pwm_device *pwm,
 				 struct pwm_state *state)
 {
-	int ret = pwm_apply_state(pwm, state);
+	int ret = pwm_apply_might_sleep(pwm, state);
 
 	/* release lock taken in pwm_class_get_state */
 	mutex_unlock(&export->lock);

index 2aff6db748e2..698c420e0869 100644
@@ -90,7 +90,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	pwm_set_relative_duty_cycle(&pstate,
 			drvdata->duty_cycle_table[selector].dutycycle, 100);
 
-	ret = pwm_apply_state(drvdata->pwm, &pstate);
+	ret = pwm_apply_might_sleep(drvdata->pwm, &pstate);
 	if (ret) {
 		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;

@@ -216,7 +216,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 
 	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
 
-	ret = pwm_apply_state(drvdata->pwm, &pstate);
+	ret = pwm_apply_might_sleep(drvdata->pwm, &pstate);
 	if (ret) {
 		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;

index 8fcb62be597b..a3412c936ca2 100644
@@ -180,7 +180,7 @@ static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
 
 	pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
 
-	return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
+	return pwm_apply_might_sleep(pchip->pwmd, &pchip->pwmd_state);
 }
 
 /* update and get brightness */

index da1f124db69c..7075bfab59c4 100644
@@ -234,7 +234,7 @@ static int lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
 	state.duty_cycle = div_u64(br * state.period, max_br);
 	state.enabled = state.duty_cycle;
 
-	return pwm_apply_state(lp->pwm, &state);
+	return pwm_apply_might_sleep(lp->pwm, &state);
 }
 
 static int lp855x_bl_update_status(struct backlight_device *bl)

index 289bd9ce4d36..35c716e9043c 100644
@@ -103,7 +103,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		pwm_get_state(pb->pwm, &state);
 		state.duty_cycle = compute_duty_cycle(pb, brightness, &state);
 		state.enabled = true;
-		pwm_apply_state(pb->pwm, &state);
+		pwm_apply_might_sleep(pb->pwm, &state);
 
 		pwm_backlight_power_on(pb);
 	} else {

@@ -120,7 +120,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		 * inactive output.
 		 */
 		state.enabled = !pb->power_supply && !pb->enable_gpio;
-		pwm_apply_state(pb->pwm, &state);
+		pwm_apply_might_sleep(pb->pwm, &state);
 	}
 
 	if (pb->notify_after)

@@ -528,7 +528,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	if (!state.period && (data->pwm_period_ns > 0))
 		state.period = data->pwm_period_ns;
 
-	ret = pwm_apply_state(pb->pwm, &state);
+	ret = pwm_apply_might_sleep(pb->pwm, &state);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 			ret);

@@ -633,7 +633,7 @@ static void pwm_backlight_remove(struct platform_device *pdev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 
 	if (pb->exit)
 		pb->exit(&pdev->dev);

@@ -649,7 +649,7 @@ static void pwm_backlight_shutdown(struct platform_device *pdev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 }
 
 #ifdef CONFIG_PM_SLEEP

@@ -673,7 +673,7 @@ static int pwm_backlight_suspend(struct device *dev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 
 	if (pb->notify_after)
 		pb->notify_after(pb->dev, 0);

index 5ae48e36fccb..1a4f90ea7d5a 100644
@@ -347,7 +347,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 
 		pwm_init_state(par->pwm, &pwmstate);
 		pwm_set_relative_duty_cycle(&pwmstate, 50, 100);
-		pwm_apply_state(par->pwm, &pwmstate);
+		pwm_apply_might_sleep(par->pwm, &pwmstate);
 
 		/* Enable the PWM */
 		pwm_enable(par->pwm);

index f87655c06c82..b64b8a82415c 100644
@@ -92,8 +92,8 @@ struct pwm_device {
  * @state: state to fill with the current PWM state
  *
  * The returned PWM state represents the state that was applied by a previous call to
- * pwm_apply_state(). Drivers may have to slightly tweak that state before programming it to
- * hardware. If pwm_apply_state() was never called, this returns either the current hardware
+ * pwm_apply_might_sleep(). Drivers may have to slightly tweak that state before programming it to
+ * hardware. If pwm_apply_might_sleep() was never called, this returns either the current hardware
  * state (if supported) or the default settings.
  */
 static inline void pwm_get_state(const struct pwm_device *pwm,

@@ -157,20 +157,20 @@ static inline void pwm_get_args(const struct pwm_device *pwm,
 }
 
 /**
- * pwm_init_state() - prepare a new state to be applied with pwm_apply_state()
+ * pwm_init_state() - prepare a new state to be applied with pwm_apply_might_sleep()
  * @pwm: PWM device
  * @state: state to fill with the prepared PWM state
  *
  * This functions prepares a state that can later be tweaked and applied
- * to the PWM device with pwm_apply_state(). This is a convenient function
+ * to the PWM device with pwm_apply_might_sleep(). This is a convenient function
  * that first retrieves the current PWM state and the replaces the period
  * and polarity fields with the reference values defined in pwm->args.
  * Once the function returns, you can adjust the ->enabled and ->duty_cycle
- * fields according to your needs before calling pwm_apply_state().
+ * fields according to your needs before calling pwm_apply_might_sleep().
  *
  * ->duty_cycle is initially set to zero to avoid cases where the current
  * ->duty_cycle value exceed the pwm_args->period one, which would trigger
- * an error if the user calls pwm_apply_state() without adjusting ->duty_cycle
+ * an error if the user calls pwm_apply_might_sleep() without adjusting ->duty_cycle
  * first.
  */
 static inline void pwm_init_state(const struct pwm_device *pwm,

@@ -226,7 +226,7 @@ pwm_get_relative_duty_cycle(const struct pwm_state *state, unsigned int scale)
  *
  * pwm_init_state(pwm, &state);
  * pwm_set_relative_duty_cycle(&state, 50, 100);
- * pwm_apply_state(pwm, &state);
+ * pwm_apply_might_sleep(pwm, &state);
  *
  * This functions returns -EINVAL if @duty_cycle and/or @scale are
  * inconsistent (@scale == 0 or @duty_cycle > @scale).

@@ -304,7 +304,7 @@ struct pwm_chip {
 
 #if IS_ENABLED(CONFIG_PWM)
 /* PWM user APIs */
-int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
+int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state);
 int pwm_adjust_config(struct pwm_device *pwm);
 
 /**

@@ -332,7 +332,7 @@ static inline int pwm_config(struct pwm_device *pwm, int duty_ns,
 
 	state.duty_cycle = duty_ns;
 	state.period = period_ns;
-	return pwm_apply_state(pwm, &state);
+	return pwm_apply_might_sleep(pwm, &state);
 }
 
 /**

@@ -353,7 +353,7 @@ static inline int pwm_enable(struct pwm_device *pwm)
 		return 0;
 
 	state.enabled = true;
-	return pwm_apply_state(pwm, &state);
+	return pwm_apply_might_sleep(pwm, &state);
 }
 
 /**

@@ -372,7 +372,7 @@ static inline void pwm_disable(struct pwm_device *pwm)
 		return;
 
 	state.enabled = false;
-	pwm_apply_state(pwm, &state);
+	pwm_apply_might_sleep(pwm, &state);
 }
 
 /* PWM provider APIs */

@@ -403,8 +403,8 @@ struct pwm_device *devm_fwnode_pwm_get(struct device *dev,
 				       struct fwnode_handle *fwnode,
 				       const char *con_id);
 #else
-static inline int pwm_apply_state(struct pwm_device *pwm,
-				  const struct pwm_state *state)
+static inline int pwm_apply_might_sleep(struct pwm_device *pwm,
+					const struct pwm_state *state)
 {
 	might_sleep();
 	return -ENOTSUPP;

@@ -521,7 +521,7 @@ static inline void pwm_apply_args(struct pwm_device *pwm)
 	state.period = pwm->args.period;
 	state.usage_power = false;
 
-	pwm_apply_state(pwm, &state);
+	pwm_apply_might_sleep(pwm, &state);
 }
 
 struct pwm_lookup {

index b64b8a82415c..c9cb87b59ac8 100644
@@ -407,12 +407,12 @@ static inline int pwm_apply_might_sleep(struct pwm_device *pwm,
 					const struct pwm_state *state)
 {
 	might_sleep();
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static inline int pwm_adjust_config(struct pwm_device *pwm)
 {
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static inline int pwm_config(struct pwm_device *pwm, int duty_ns,

index ce92db1f8511..28265fdfc92a 100644
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>

83 lines not on this page · raw message

index c9cb87b59ac8..495af3627939 100644
@@ -285,6 +285,7 @@ struct pwm_ops {
  * @npwm: number of PWMs controlled by this chip
  * @of_xlate: request a PWM device given a device tree PWM specifier
  * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier
+ * @atomic: can the driver's ->apply() be called in atomic context
  * @pwms: array of PWM devices allocated by the framework
  */
 struct pwm_chip {

@@ -297,6 +298,7 @@ struct pwm_chip {
 	struct pwm_device * (*of_xlate)(struct pwm_chip *chip,
 					const struct of_phandle_args *args);
 	unsigned int of_pwm_n_cells;
+	bool atomic;
 
 	/* only used internally by the PWM framework */
 	struct pwm_device *pwms;

@@ -305,6 +307,7 @@ struct pwm_chip {
 #if IS_ENABLED(CONFIG_PWM)
 /* PWM user APIs */
 int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state);
+int pwm_apply_atomic(struct pwm_device *pwm, const struct pwm_state *state);
 int pwm_adjust_config(struct pwm_device *pwm);
 
 /**

@@ -375,6 +378,17 @@ static inline void pwm_disable(struct pwm_device *pwm)
 	pwm_apply_might_sleep(pwm, &state);
 }
 
+/**
+ * pwm_might_sleep() - is pwm_apply_atomic() supported?
+ * @pwm: PWM device
+ *
+ * Returns: false if pwm_apply_atomic() can be called from atomic context.
+ */
+static inline bool pwm_might_sleep(struct pwm_device *pwm)
+{
+	return !pwm->chip->atomic;
+}
+
 /* PWM provider APIs */
 int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result,
 		unsigned long timeout);

@@ -403,6 +417,11 @@ struct pwm_device *devm_fwnode_pwm_get(struct device *dev,
 				       struct fwnode_handle *fwnode,
 				       const char *con_id);
 #else
+static inline bool pwm_might_sleep(struct pwm_device *pwm)
+{
+	return true;
+}
+
 static inline int pwm_apply_might_sleep(struct pwm_device *pwm,
 					const struct pwm_state *state)
 {

@@ -410,6 +429,12 @@ static inline int pwm_apply_might_sleep(struct pwm_device *pwm,
 	return -EOPNOTSUPP;
 }
 
+static inline int pwm_apply_atomic(struct pwm_device *pwm,
+				   const struct pwm_state *state)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline int pwm_adjust_config(struct pwm_device *pwm)
 {
 	return -EOPNOTSUPP;

index ab30667f4f95..e556ae300c82 100644
@@ -28,6 +28,7 @@ struct bcm2835_pwm {
 	struct device *dev;
 	void __iomem *base;
 	struct clk *clk;
+	unsigned long rate;
 };
 
 static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)

@@ -63,17 +64,11 @@ static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 {
 
 	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
-	unsigned long rate = clk_get_rate(pc->clk);
 	unsigned long long period_cycles;
 	u64 max_period;
 
 	u32 val;
 
-	if (!rate) {
-		dev_err(pc->dev, "failed to get clock rate\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * period_cycles must be a 32 bit value, so period * rate / NSEC_PER_SEC
 	 * must be <= U32_MAX. As U32_MAX * NSEC_PER_SEC < U64_MAX the

@@ -88,13 +83,13 @@ static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * <=> period < ((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate
 	 * <=> period <= ceil((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate) - 1
 	 */
-	max_period = DIV_ROUND_UP_ULL((u64)U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC / 2, rate) - 1;
+	max_period = DIV_ROUND_UP_ULL((u64)U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC / 2, pc->rate) - 1;
 
 	if (state->period > max_period)
 		return -EINVAL;
 
 	/* set period */
-	period_cycles = DIV_ROUND_CLOSEST_ULL(state->period * rate, NSEC_PER_SEC);
+	period_cycles = DIV_ROUND_CLOSEST_ULL(state->period * pc->rate, NSEC_PER_SEC);
 
 	/* don't accept a period that is too small */
 	if (period_cycles < PERIOD_MIN)

@@ -103,7 +98,7 @@ static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	writel(period_cycles, pc->base + PERIOD(pwm->hwpwm));
 
 	/* set duty cycle */
-	val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * rate, NSEC_PER_SEC);
+	val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * pc->rate, NSEC_PER_SEC);
 	writel(val, pc->base + DUTY(pwm->hwpwm));
 
 	/* set polarity */

@@ -151,16 +146,40 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
 				     "clock not found\n");
 
+	ret = clk_rate_exclusive_get(pc->clk);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "fail to get exclusive rate\n");
+
+	pc->rate = clk_get_rate(pc->clk);
+	if (!pc->rate) {
+		clk_rate_exclusive_put(pc->clk);
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "failed to get clock rate\n");
+	}
+
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.atomic = true;
 	pc->chip.npwm = 2;
 
 	platform_set_drvdata(pdev, pc);
 
 	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
-	if (ret < 0)
+	if (ret < 0) {
+		clk_rate_exclusive_put(pc->clk);
 		return dev_err_probe(&pdev->dev, ret,
 				     "failed to add pwmchip\n");
+	}
+
+	return 0;
+}
+
+static int bcm2835_pwm_remove(struct platform_device *pdev)
+{
+	struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
+
+	clk_rate_exclusive_put(pc->clk);
 
 	return 0;
 }

@@ -197,6 +216,7 @@ static struct platform_driver bcm2835_pwm_driver = {
 		.pm = pm_ptr(&bcm2835_pwm_pm_ops),
 	},
 	.probe = bcm2835_pwm_probe,
+	.remove = bcm2835_pwm_remove,
 };
 module_platform_driver(bcm2835_pwm_driver);
 

index cf51e2760975..fe368aebbc13 100644
@@ -10,6 +10,8 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/hrtimer.h>
+#include <linux/completion.h>
 #include <media/rc-core.h>
 
 #define DRIVER_NAME	"pwm-ir-tx"

@@ -17,8 +19,14 @@
 
 struct pwm_ir {
 	struct pwm_device *pwm;
-	unsigned int carrier;
-	unsigned int duty_cycle;
+	struct hrtimer timer;
+	struct completion tx_done;
+	struct pwm_state *state;
+	u32 carrier;
+	u32 duty_cycle;
+	const unsigned int *txbuf;
+	unsigned int txbuf_len;
+	unsigned int txbuf_index;
 };
 
 static const struct of_device_id pwm_ir_of_match[] = {

@@ -49,8 +57,8 @@ static int pwm_ir_set_carrier(struct rc_dev *dev, u32 carrier)
 	return 0;
 }
 
-static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
-		     unsigned int count)
+static int pwm_ir_tx_sleep(struct rc_dev *dev, unsigned int *txbuf,
+			   unsigned int count)
 {
 	struct pwm_ir *pwm_ir = dev->priv;
 	struct pwm_device *pwm = pwm_ir->pwm;

@@ -82,6 +90,62 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
 	return count;
 }
 
+static int pwm_ir_tx_atomic(struct rc_dev *dev, unsigned int *txbuf,
+			    unsigned int count)
+{
+	struct pwm_ir *pwm_ir = dev->priv;
+	struct pwm_device *pwm = pwm_ir->pwm;
+	struct pwm_state state;
+
+	pwm_init_state(pwm, &state);
+
+	state.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, pwm_ir->carrier);
+	pwm_set_relative_duty_cycle(&state, pwm_ir->duty_cycle, 100);
+
+	pwm_ir->txbuf = txbuf;
+	pwm_ir->txbuf_len = count;
+	pwm_ir->txbuf_index = 0;
+	pwm_ir->state = &state;
+
+	hrtimer_start(&pwm_ir->timer, 0, HRTIMER_MODE_REL);
+
+	wait_for_completion(&pwm_ir->tx_done);
+
+	return count;
+}
+
+static enum hrtimer_restart pwm_ir_timer(struct hrtimer *timer)
+{
+	struct pwm_ir *pwm_ir = container_of(timer, struct pwm_ir, timer);
+	ktime_t now;
+
+	/*
+	 * If we happen to hit an odd latency spike, loop through the
+	 * pulses until we catch up.
+	 */
+	do {
+		u64 ns;
+
+		pwm_ir->state->enabled = !(pwm_ir->txbuf_index % 2);
+		pwm_apply_atomic(pwm_ir->pwm, pwm_ir->state);
+
+		if (pwm_ir->txbuf_index >= pwm_ir->txbuf_len) {
+			complete(&pwm_ir->tx_done);
+
+			return HRTIMER_NORESTART;
+		}
+
+		ns = US_TO_NS(pwm_ir->txbuf[pwm_ir->txbuf_index]);
+		hrtimer_add_expires_ns(timer, ns);
+
+		pwm_ir->txbuf_index++;
+
+		now = timer->base->get_time();
+	} while (hrtimer_get_expires_tv64(timer) < now);
+
+	return HRTIMER_RESTART;
+}
+
 static int pwm_ir_probe(struct platform_device *pdev)
 {
 	struct pwm_ir *pwm_ir;

@@ -103,10 +167,19 @@ static int pwm_ir_probe(struct platform_device *pdev)
 	if (!rcdev)
 		return -ENOMEM;
 
+	if (pwm_might_sleep(pwm_ir->pwm)) {
+		dev_info(&pdev->dev, "TX will not be accurate as PWM device might sleep\n");
+		rcdev->tx_ir = pwm_ir_tx_sleep;
+	} else {
+		init_completion(&pwm_ir->tx_done);
+		hrtimer_init(&pwm_ir->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		pwm_ir->timer.function = pwm_ir_timer;
+		rcdev->tx_ir = pwm_ir_tx_atomic;
+	}
+
 	rcdev->priv = pwm_ir;
 	rcdev->driver_name = DRIVER_NAME;
 	rcdev->device_name = DEVICE_NAME;
-	rcdev->tx_ir = pwm_ir_tx;
 	rcdev->s_tx_duty_cycle = pwm_ir_set_duty_cycle;
 	rcdev->s_tx_carrier = pwm_ir_set_carrier;