Skip to contentSkip to conversation

renesas: r8a779g0: Add missing SCIF_CLK2

PATCH New Geert Uytterhoeven 1 participant 3 messages Jan 18, 2024

Subsystems (5)
lore
Share & tools
lore

Geert Uytterhoeven

author maintainer
#0 lore raw

cover renesas: r8a779g0: Add missing SCIF_CLK2

Hi all,

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4. The first pin provides the SCIF_CLK signal for the other (H)SCIF instances.

This patch series adds the missing SCIF_CLK2 pin group/function to the R-Car V4H pin control driver and to the R-Car V4H DTS file, and fixes the HSCIF2 and SCIF4 DT descriptions to refer to the proper clock.

As SCIF_CLK2 cannot be used on the White Hawk development board, I could not test proper operation of HSCIF2 and SCIF4. I did verify that HSCIF2 and SCIF4 do not operate properly when trying to use (the first and thus incorrect) SCIF_CLK as the clock source.

I plan to queue these in renesas-pinctrl resp. renesas-devel for v6.9.

Thanks for your comments!

Geert Uytterhoeven (2):
pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2

 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++---
 drivers/pinctrl/renesas/pfc-r8a779g0.c    | 14 ++++++++++++++
 2 files changed, 23 insertions(+), 3 deletions(-)
Signature · 12 lines
2.34.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
author maintainer
#1 lore raw

PATCH 1/2 pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
---
 drivers/pinctrl/renesas/pfc-r8a779g0.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/pinctrl/renesas/pfc-r8a779g0.c +14 -0
index 8420145a271d5bf8..2d59a80b7395af5f 100644
@@ -2468,6 +2468,14 @@ static const unsigned int scif_clk_mux[] = {
 	SCIF_CLK_MARK,
 };
 
+static const unsigned int scif_clk2_pins[] = {
+	/* SCIF_CLK2 */
+	RCAR_GP_PIN(8, 11),
+};
+static const unsigned int scif_clk2_mux[] = {
+	SCIF_CLK2_MARK,
+};
+
 /* - SSI ------------------------------------------------- */
 static const unsigned int ssi_data_pins[] = {
 	/* SSI_SD */
@@ -2790,6 +2798,7 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(scif4_clk),
 	SH_PFC_PIN_GROUP(scif4_ctrl),
 	SH_PFC_PIN_GROUP(scif_clk),
+	SH_PFC_PIN_GROUP(scif_clk2),
 
 	SH_PFC_PIN_GROUP(ssi_data),
 	SH_PFC_PIN_GROUP(ssi_ctrl),
@@ -3126,6 +3135,10 @@ static const char * const scif_clk_groups[] = {
 	"scif_clk",
 };
 
+static const char * const scif_clk2_groups[] = {
+	"scif_clk2",
+};
+
 static const char * const ssi_groups[] = {
 	"ssi_data",
 	"ssi_ctrl",
@@ -3215,6 +3228,7 @@ static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(scif3),
 	SH_PFC_FUNCTION(scif4),
 	SH_PFC_FUNCTION(scif_clk),
+	SH_PFC_FUNCTION(scif_clk2),
 
 	SH_PFC_FUNCTION(ssi),
 
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH 2/2 arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2

In reply to Geert Uytterhoeven

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes a4c31c56d2d35641 ("arm64: dts: renesas: r8a779g0: Add SCIF nodes")
Fixes 39d9dfc6fbe1860e ("arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes")
---
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/renesas/r8a779g0.dtsi +9 -3
index 0a46f315c307e3cb..7b05b9b3e0a85f44 100644
@@ -185,13 +185,19 @@ psci {
 		method = "smc";
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -690,7 +696,7 @@ hscif2: serial@e6560000 {
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
 			       <&dmac1 0x35>, <&dmac1 0x34>;
@@ -1066,7 +1072,7 @@ scif4: serial@e6c40000 {
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
 			       <&dmac1 0x59>, <&dmac1 0x58>;
Signature · 1 line
2.34.1