tools/resolve_btfids: fix cross-compilation to non-host endianness
v3 cover tools/resolve_btfids: fix cross-compilation to non-host endianness
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the build and afterwards patched by resolve_btfids with correct values. Since resolve_btfids always writes in host-native endianness, it relies on libelf to do the translation when the target ELF is cross-compiled to a different endianness (this was introduced in commit 61e8aeda9398 ("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8 entries because these were written during vmlinux compilation and are in the correct endianness already. This will lead to numerous selftests failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILEDSince it's not possible to instruct libelf to translate just certain values, let's manually bswap the flags (both global and entry flags) in resolve_btfids when needed, so that libelf then translates everything correctly.
The first patch of the series refactors resolve_btfids by using types from btf_ids.h instead of accessing the BTF ID data using magic offsets.
---
Changes in v3:
- add byte swap of global 'flags' field in btf_id_set8 (suggested by Jiri Olsa)
- cleaner refactoring of sets_patch (suggested by Jiri Olsa)
- add compile-time assertion that IDs are at the beginning of pairs struct in btf_id_set8 (suggested by Daniel Borkmann)
Changes in v2:
- use type defs from btf_ids.h (suggested by Andrii Nakryiko)
Viktor Malik (2):
tools/resolve_btfids: Refactor set sorting with types from btf_ids.h tools/resolve_btfids: fix cross-compilation to non-host endianness
tools/bpf/resolve_btfids/main.c | 64 +++++++++++++++++++++++++++------ tools/include/linux/btf_ids.h | 9 +++++ 2 files changed, 63 insertions(+), 10 deletions(-)
Signature · 1 line
2.43.0
PATCH v3 1/2 tools/resolve_btfids: Refactor set sorting with types from btf_ids.h
Instead of using magic offsets to access BTF ID set data, leverage types from btf_ids.h (btf_id_set and btf_id_set8) which define the actual layout of the data. Thanks to this change, set sorting should also continue working if the layout changes.
This requires to sync the definition of 'struct btf_id_set8' from include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync the rest of the file at the moment, b/c that would require to also sync multiple dependent headers and we don't need any other defs from btf_ids.h.
--- tools/bpf/resolve_btfids/main.c | 29 +++++++++++++++++++---------- tools/include/linux/btf_ids.h | 9 +++++++++ 2 files changed, 28 insertions(+), 10 deletions(-)
tools/bpf/resolve_btfids/main.c +19 -10
@@ -70,6 +70,7 @@#include <sys/stat.h> #include <fcntl.h> #include <errno.h> +#include <linux/btf_ids.h> #include <linux/rbtree.h> #include <linux/zalloc.h> #include <linux/err.h>
@@ -78,7 +79,7 @@#include <subcmd/parse-options.h> #define BTF_IDS_SECTION ".BTF_ids" -#define BTF_ID "__BTF_ID__" +#define BTF_ID_PREFIX "__BTF_ID__"#define BTF_STRUCT "struct"#define BTF_UNION "union"
@@ -161,7 +162,7 @@ static int eprintf(int level, int var, const char *fmt, ...)static bool is_btf_id (const char *name) { -return name && !strncmp (name,BTF_ID ,sizeof (BTF_ID ) -1 ); +return name && !strncmp (name,BTF_ID_PREFIX ,sizeof (BTF_ID_PREFIX ) -1 ); }static struct btf_id *btf_id__find (struct rb_root *root,const char *name)
@@ -441,7 +442,7 @@ static int symbols_collect(struct object *obj)* __BTF_ID__TYPE__vfs_truncate__0 * prefix = ^ */ - prefix = name +sizeof (BTF_ID ) -1 ; + prefix = name +sizeof (BTF_ID_PREFIX ) -1 ;/* struct */ if (!strncmp (prefix,BTF_STRUCT ,sizeof (BTF_STRUCT ) -1 )) {
@@ -654,10 +655,10 @@ static int sets_patch(struct object *obj) next =rb_first (&obj->sets);while (next) { +struct btf_id_set8 *set8; +struct btf_id_set *set;unsigned long addr, idx;struct btf_id *id; -int *base; -int cnt; id = rb_entry(next, struct btf_id, rb_node); addr = id->addr[0 ];
@@ -671,13 +672,21 @@ static int sets_patch(struct object *obj) } idx = idx /sizeof (int ); - base = &ptr[idx] + (id->is_set8 ?2 :1 ); - cnt = ptr[idx]; +if (id->is_set) { + set = (struct btf_id_set *)&ptr[idx]; +qsort (set->ids, set->cnt,sizeof (set->ids[0 ]), cmp_id); + }else { + set8 = (struct btf_id_set8 *)&ptr[idx]; +/* +* Make sure id is at the beginning of the pairs +* struct, otherwise the below qsort would not work. +*/ +BUILD_BUG_ON (set8->pairs != &set8->pairs[0 ].id); +qsort (set8->pairs, set8->cnt,sizeof (set8->pairs[0 ]), cmp_id); + }pr_debug ("sorting addr %5lu: cnt %6d [%s]\n" , - (idx +1 ) *sizeof (int ), cnt, id->name); - -qsort (base, cnt, id->is_set8 ?sizeof (uint64_t ) :sizeof (int ), cmp_id); + (idx +1 ) *sizeof (int ), id->is_set ? set->cnt : set8->cnt, id->name); next =rb_next (next); }
tools/include/linux/btf_ids.h +9 -0
@@ -8,6 +8,15 @@ struct btf_id_set {u32 ids[]; }; +struct btf_id_set8 { +u32 cnt; +u32 flags; +struct { +u32 id; +u32 flags; + } pairs[]; +}; +#ifdef CONFIG_DEBUG_INFO_BTF #include <linux/compiler.h> /* for __PASTE */
Signature · 1 line
2.43.0
Re: [PATCH bpf-next v3 1/2] tools/resolve_btfids: Refactor set sorting with types from btf_ids.h
Quoted 70 lines · Viktor Malik
Instead of using magic offsets to access BTF ID set data, leverage types from
btf_ids.h(btf_id_setandbtf_id_set8) which define the actual layout of the data. Thanks to this change, set sorting should also continue working if the layout changes.This requires to sync the definition of 'struct
btf_id_set8' frominclude/linux/btf_ids.htotools/include/linux/btf_ids.h. We don't sync the rest of the file at the moment, b/c that would require to also sync multiple dependent headers and we don't need any other defs frombtf_ids.h.Signed-off-by Viktor Malik <[email protected]>--- tools/bpf/resolve_btfids/main.c | 29 +++++++++++++++++++---------- tools/include/linux/btf_ids.h | 9 +++++++++ 2 files changed, 28 insertions(+), 10 deletions(-)tools/bpf/resolve_btfids/main.c +6
-5@@ -70,6 +70,7 @@#include <sys/stat.h> #include <fcntl.h> #include <errno.h> +#include <linux/btf_ids.h> #include <linux/rbtree.h> #include <linux/zalloc.h> #include <linux/err.h> @@ -78,7 +79,7 @@#include <subcmd/parse-options.h> #define BTF_IDS_SECTION ".BTF_ids" -#define BTF_ID "__BTF_ID__" +#define BTF_ID_PREFIX "__BTF_ID__"#define BTF_STRUCT "struct"#define BTF_UNION "union"@@ -161,7 +162,7 @@ static int eprintf(int level, int var, const char *fmt, ...)static bool is_btf_id (const char *name) { -return name && !strncmp (name,BTF_ID ,sizeof (BTF_ID ) -1 ); +return name && !strncmp (name,BTF_ID_PREFIX ,sizeof (BTF_ID_PREFIX ) -1 ); }static struct btf_id *btf_id__find (struct rb_root *root,const char *name)@@ -441,7 +442,7 @@ static int symbols_collect(struct object *obj)* __BTF_ID__TYPE__vfs_truncate__0 * prefix = ^ */ - prefix = name +sizeof (BTF_ID ) -1 ; + prefix = name +sizeof (BTF_ID_PREFIX ) -1 ;/* struct */ if (!strncmp (prefix,BTF_STRUCT ,sizeof (BTF_STRUCT ) -1 )) {@@ -654,10 +655,10 @@ static int sets_patch(struct object *obj) next =rb_first (&obj->sets);while (next) { +struct btf_id_set8 *set8; +struct btf_id_set *set;unsigned long addr, idx;struct btf_id *id; -int *base; -int cnt; id = rb_entry(next, struct btf_id, rb_node); addr = id->addr[0 ];
tools/bpf/resolve_btfids/main.c static int sets_patch(struct object *obj) · line 676
Quoted 7 lines
tools/bpf/resolve_btfids/main.c +2
-2@@ -671,13 +672,21 @@ static int sets_patch(struct object *obj) } idx = idx /sizeof (int ); - base = &ptr[idx] + (id->is_set8 ?2 :1 ); - cnt = ptr[idx]; +if (id->is_set) { + set = (struct btf_id_set *)&ptr[idx];
Nit: should be able to simplify logic a bit like this:
int off = addr - obj->efile.idlist_addr;
set8 = data->d_buf + off;Don't think that idx, ptr or casts are necessary anymore.
Quoted 42 lines
tools/bpf/resolve_btfids/main.c +11
-3+qsort (set->ids, set->cnt,sizeof (set->ids[0 ]), cmp_id); + }else { + set8 = (struct btf_id_set8 *)&ptr[idx]; +/* +* Make sure id is at the beginning of the pairs +* struct, otherwise the below qsort would not work. +*/ +BUILD_BUG_ON (set8->pairs != &set8->pairs[0 ].id); +qsort (set8->pairs, set8->cnt,sizeof (set8->pairs[0 ]), cmp_id); + }pr_debug ("sorting addr %5lu: cnt %6d [%s]\n" , - (idx +1 ) *sizeof (int ), cnt, id->name); - -qsort (base, cnt, id->is_set8 ?sizeof (uint64_t ) :sizeof (int ), cmp_id); + (idx +1 ) *sizeof (int ), id->is_set ? set->cnt : set8->cnt, id->name); next =rb_next (next); }tools/include/linux/btf_ids.h +9
-0@@ -8,6 +8,15 @@ struct btf_id_set {u32 ids[]; }; +struct btf_id_set8 { +u32 cnt; +u32 flags; +struct { +u32 id; +u32 flags; + } pairs[]; +}; +#ifdef CONFIG_DEBUG_INFO_BTF #include <linux/compiler.h> /* for __PASTE */ Signature · 1 line
2.43.0
Re: [PATCH bpf-next v3 1/2] tools/resolve_btfids: Refactor set sorting with types from btf_ids.h
On Mon, Feb 05, 2024 at 12:45:30PM -0700, Daniel Xu wrote:
SNIP
Quoted 24 lines
Quoted 14 lines
tools/bpf/resolve_btfids/main.c +2
-2@@ -654,10 +655,10 @@ static int sets_patch(struct object *obj) next =rb_first (&obj->sets);while (next) { +struct btf_id_set8 *set8; +struct btf_id_set *set;unsigned long addr, idx;struct btf_id *id; -int *base; -int cnt; id = rb_entry(next, struct btf_id, rb_node); addr = id->addr[0 ];tools/bpf/resolve_btfids/main.c static int sets_patch(struct object *obj) · line 676
Quoted 7 lines
tools/bpf/resolve_btfids/main.c +2
-2@@ -671,13 +672,21 @@ static int sets_patch(struct object *obj) } idx = idx /sizeof (int ); - base = &ptr[idx] + (id->is_set8 ?2 :1 ); - cnt = ptr[idx]; +if (id->is_set) { + set = (struct btf_id_set *)&ptr[idx];Nit: should be able to simplify logic a bit like this:
Quoted 4 lines
int off = addr - obj->efile.idlist_addr; set8 = data->d_buf + off;Don't think that
idx,ptror casts are necessary anymore.
+1 , otherwise it looks good to me
jirka
Quoted 43 lines
Quoted 43 lines
tools/bpf/resolve_btfids/main.c +11
-3+qsort (set->ids, set->cnt,sizeof (set->ids[0 ]), cmp_id); + }else { + set8 = (struct btf_id_set8 *)&ptr[idx]; +/* +* Make sure id is at the beginning of the pairs +* struct, otherwise the below qsort would not work. +*/ +BUILD_BUG_ON (set8->pairs != &set8->pairs[0 ].id); +qsort (set8->pairs, set8->cnt,sizeof (set8->pairs[0 ]), cmp_id); + }pr_debug ("sorting addr %5lu: cnt %6d [%s]\n" , - (idx +1 ) *sizeof (int ), cnt, id->name); - -qsort (base, cnt, id->is_set8 ?sizeof (uint64_t ) :sizeof (int ), cmp_id); + (idx +1 ) *sizeof (int ), id->is_set ? set->cnt : set8->cnt, id->name); next =rb_next (next); }tools/include/linux/btf_ids.h +9
-0@@ -8,6 +8,15 @@ struct btf_id_set {u32 ids[]; }; +struct btf_id_set8 { +u32 cnt; +u32 flags; +struct { +u32 id; +u32 flags; + } pairs[]; +}; +#ifdef CONFIG_DEBUG_INFO_BTF #include <linux/compiler.h> /* for __PASTE */ Signature · 1 line
2.43.0
PATCH v3 2/2 tools/resolve_btfids: fix cross-compilation to non-host endianness
In reply to Viktor MalikThe .BTF_ids section is pre-filled with zeroed BTF ID entries during the build and afterwards patched by resolve_btfids with correct values. Since resolve_btfids always writes in host-native endianness, it relies on libelf to do the translation when the target ELF is cross-compiled to a different endianness (this was introduced in commit 61e8aeda9398 ("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8 entries because these were written during vmlinux compilation and are in the correct endianness already. This will lead to numerous selftests failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILEDSince it's not possible to instruct libelf to translate just certain values, let's manually bswap the flags (both global and entry flags) in resolve_btfids when needed, so that libelf then translates everything correctly.
--- tools/bpf/resolve_btfids/main.c | 35 +++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
tools/bpf/resolve_btfids/main.c +35 -0
@@ -90,6 +90,14 @@#define ADDR_CNT 100 +#if __BYTE_ORDER == __LITTLE_ENDIAN +# define ELFDATANATIVE ELFDATA2LSB +#elif __BYTE_ORDER == __BIG_ENDIAN +# define ELFDATANATIVE ELFDATA2MSB +#else +# error "Unknown machine endianness!" +#endif +struct btf_id {struct rb_node rb_node;char *name;
@@ -117,6 +125,7 @@ struct object {int idlist_shndx;size_t strtabidx;unsigned long idlist_addr; +int encoding; } efile;struct rb_root sets;
@@ -320,6 +329,7 @@ static int elf_collect(struct object *obj) {Elf_Scn *scn =NULL ;size_t shdrstrndx; +GElf_Ehdr ehdr;int idx =0 ;Elf *elf;int fd;
@@ -351,6 +361,13 @@ static int elf_collect(struct object *obj)return -1 ; } +if (gelf_getehdr (obj->efile.elf, &ehdr) ==NULL ) { +pr_err ("FAILED cannot get ELF header: %s\n" , +elf_errmsg (-1 )); +return -1 ; + } + obj->efile.encoding = ehdr.e_ident[EI_DATA ]; +/* * Scan all the elf sections and look for save data * from .BTF_ids section and symbols.
@@ -683,6 +700,24 @@ static int sets_patch(struct object *obj)*/ BUILD_BUG_ON (set8->pairs != &set8->pairs[0 ].id);qsort (set8->pairs, set8->cnt,sizeof (set8->pairs[0 ]), cmp_id); + +/* +* When ELF endianness does not match endianness of the +* host, libelf will do the translation when updating +* the ELF. This, however, corrupts SET8 flags which are +* already in the target endianness. So, let's bswap +* them to the host endianness and libelf will then +* correctly translate everything. +*/ +if (obj->efile.encoding !=ELFDATANATIVE ) { +int i; + + set8->flags =bswap_32 (set8->flags); +for (i =0 ; i < set8->cnt; i++) { + set8->pairs[i].flags = +bswap_32 (set8->pairs[i].flags); + } + } } pr_debug("sorting addr %5lu: cnt %6d [%s]\n",
Signature · 1 line
2.43.0