Skip to contentSkip to conversation

arm64: dts: renesas: r8a779h0: Add CMT and TMU timer nodes

PATCH In review Geert Uytterhoeven 2 participants 5 messages Apr 2, 2024 – Apr 5, 2024

Subsystems (2)
lore
Share & tools
lore

Geert Uytterhoeven

author maintainer
#0 lore raw

cover arm64: dts: renesas: r8a779h0: Add CMT and TMU timer nodes

Hi all,

This patch series adds device nodes for the Compare Match Timer Type0 (CMT0) and Type1 (CMT1/2/3), and for the Timer Units (TMU) on the R-Car V4M (R8A779H0) SoC. As usual, these device nodes are disabled by default, but can be enabled in a board DTS file when deemed necessary.

All instances have been tested successfully using [1] on the Renesas Gray Hawk Single development board.

I plan to queue this in renesas-devel for v6.10.

Thanks for your comments!

[1] https://elinux.org/R-Car/Tests:timers

Thanh Quan (2):
arm64: dts: renesas: r8a779h0: Add CMT nodes
arm64: dts: renesas: r8a779h0: Add TMU nodes

 arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 144 ++++++++++++++++++++++
 1 file changed, 144 insertions(+)
Signature · 12 lines
2.34.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
author maintainer
#1 lore raw

PATCH 1/2 arm64: dts: renesas: r8a779h0: Add CMT nodes

From: Thanh Quan <[email protected]>

Add device nodes for the Compare Match Timer Type0 (CMT0) and Type1 (CMT1/2/3) instances on the R-Car V4M (R8A779H0) SoC.

---
Changes compared to the BSP:
- Dropped board DTS changes.

---
 arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 70 +++++++++++++++++++++++
 1 file changed, 70 insertions(+)
arch/arm64/boot/dts/renesas/r8a779h0.dtsi +70 -0
index 3a40b56c4dcf113c..e192588e0f68fa57 100644
@@ -303,6 +303,76 @@ gpio7: gpio@e6061980 {
 			resets = <&cpg 917>;
 		};
 
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779h0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a779h0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x4000>;
Signature · 1 line
2.34.1
author maintainer
#3 lore raw

PATCH 2/2 arm64: dts: renesas: r8a779h0: Add TMU nodes

In reply to Geert Uytterhoeven

From: Thanh Quan <[email protected]>

Add device nodes for the Timer Units (TMU) on the R-Car V4M (R8A779H0) SoC.

---
Changes compared to the BSP:
- Drop board DTS changes,
- Add ticpi interrupts,
- Add interrupt-names properties.

---
 arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 74 +++++++++++++++++++++++
 1 file changed, 74 insertions(+)
arch/arm64/boot/dts/renesas/r8a779h0.dtsi +74 -0
index e192588e0f68fa57..0e97799fa55aabc8 100644
@@ -404,6 +404,80 @@ tsc: thermal@e6198000 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779h0",
 				     "renesas,rcar-gen4-i2c";
Signature · 1 line
2.34.1