arm64: dts: renesas: gray-hawk-single: Add push switches and GP LEDs
Subsystems (2)
Geert Uytterhoeven
maintainercover arm64: dts: renesas: gray-hawk-single: Add push switches and GP LEDs
Hi all,
This patch series adds support for the Push Switches and General Purpose LEDs on the Gray Hawk Single board, so the former can be used for user input, and the latter can be used as indicator LEDs.
To be queued in renesas-devel for v6.12.
Thanks for your comments!
Geert Uytterhoeven (2):
arm64: dts: renesas: gray-hawk-single: Add push switches
arm64: dts: renesas: gray-hawk-single: Add GP LEDs
.../dts/renesas/r8a779h0-gray-hawk-single.dts | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+)
Signature · 12 lines
2.34.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsGeert Uytterhoeven
maintainerPATCH 1/2 arm64: dts: renesas: gray-hawk-single: Add push switches
Describe the three Push Switches on the Gray Hawk Single board, so they can be used for user input.
--- .../dts/renesas/r8a779h0-gray-hawk-single.dts | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +37 -0
@@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include "r8a779h0.dtsi"
@@ -38,6 +39,37 @@ chosen { stdout-path = "serial0:921600n8"; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */
@@ -234,6 +266,11 @@ i2c0_pins: i2c0 { function = "i2c0"; }; + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc";
Signature · 1 line
2.34.1
Geert Uytterhoeven
maintainerPATCH 2/2 arm64: dts: renesas: gray-hawk-single: Add GP LEDs
In reply to Geert UytterhoevenDescribe the three General Purpose LEDs on the Gray Hawk Single board, so they can be used as indicator LEDs.
--- .../dts/renesas/r8a779h0-gray-hawk-single.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +26 -0
@@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "r8a779h0.dtsi"
@@ -70,6 +71,31 @@ key-3 { }; }; + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */
Signature · 1 line
2.34.1