Skip to contentSkip to conversation

introduce VMA merge mode to improve brk() performance

PATCH Applied Lorenzo Stoakes 2 participants 5 messages Oct 17, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover introduce VMA merge mode to improve brk() performance

A ~5% performance regression was discovered on the aim9.brk_test.ops_per_sec by the linux kernel test bot [0].

In the past to satisfy brk() performance we duplicated VMA expansion code and special-cased do_brk_flags(). This is however horrid and undoes work to abstract this logic, so in resolving the issue I have endeavoured to avoid this.

Investigating further I was able to observe that the use of a vma_iter_next_range() and vma_prev() pair, causing an unnecessary maple tree walk. In addition there is work that we do that is simply unnecessary for brk().

Therefore, add a special VMA merge mode VMG_FLAG_JUST_EXPAND to avoid doing any of this - it assumes the VMA iterator is pointing at the previous VMA and which skips logic that brk() does not require.

This mostly eliminates the performance regression reducing it to ~2% which is in the realm of noise. In addition, the will-it-scale test brk2, written to be more representative of real-world brk() usage, shows a modest performance improvement - which gives me confidence that we are not meaningfully regressing real workloads here.

This series includes a test asserting that the 'just expand' mode works as expected.

With many thanks to Oliver Sang for helping with performance testing of candidate patch sets!

[0]:https://lore.kernel.org/linux-mm/[email protected]

Lorenzo Stoakes (2):
mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()
tools: testing: add expand-only mode VMA test

 mm/mmap.c               |  3 ++-
 mm/vma.c                | 23 +++++++++++++++--------
 mm/vma.h                | 14 ++++++++++++++
 tools/testing/vma/vma.c | 40 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 71 insertions(+), 9 deletions(-)

--
2.46.2

#1 lore raw

PATCH 1/2 mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()

We know in advance that do_brk_flags() wants only to perform a VMA expansion (if the prior VMA is compatible), and that we assume no mergeable VMA follows it.

These are the semantics of this function prior to the recent rewrite of the VMA merging logic, however we are now doing more work than necessary - positioning the VMA iterator at the prior VMA and performing tasks that are not required.

Add a new field to the vmg struct to permit merge flags and add a new merge flag VMG_FLAG_JUST_EXPAND which implies this behaviour, and have do_brk_flags() use this.

This fixes a reported performance regression in a brk() benchmarking suite.

Fixes cacded5e42b9 ("mm: avoid using vma_merge() for new VMAs")
---
 mm/mmap.c |  3 ++-
 mm/vma.c  | 23 +++++++++++++++--------
 mm/vma.h  | 14 ++++++++++++++
 3 files changed, 31 insertions(+), 9 deletions(-)
mm/mmap.c +2 -1
index dd4b35a25aeb..4a13d9f138f6 100644
@@ -1744,7 +1744,8 @@ static int do_brk_flags(struct vma_iterator *vmi, struct vm_area_struct *vma,
 		VMG_STATE(vmg, mm, vmi, addr, addr + len, flags, PHYS_PFN(addr));
 
 		vmg.prev = vma;
-		vma_iter_next_range(vmi);
+		/* vmi is positioned at prev, which this mode expects. */
+		vmg.merge_flags = VMG_FLAG_JUST_EXPAND;
 
 		if (vma_merge_new_range(&vmg))
 			goto out;
mm/vma.c +15 -8
index 4737afcb064c..b21ffec33f8e 100644
@@ -917,6 +917,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	pgoff_t pgoff = vmg->pgoff;
 	pgoff_t pglen = PHYS_PFN(end - start);
 	bool can_merge_left, can_merge_right;
+	bool just_expand = vmg->merge_flags & VMG_FLAG_JUST_EXPAND;
 
 	mmap_assert_write_locked(vmg->mm);
 	VM_WARN_ON(vmg->vma);
@@ -930,7 +931,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		return NULL;
 
 	can_merge_left = can_vma_merge_left(vmg);
-	can_merge_right = can_vma_merge_right(vmg, can_merge_left);
+	can_merge_right = !just_expand && can_vma_merge_right(vmg, can_merge_left);
 
 	/* If we can merge with the next VMA, adjust vmg accordingly. */
 	if (can_merge_right) {
@@ -953,7 +954,11 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		if (can_merge_right && !can_merge_remove_vma(next))
 			vmg->end = end;
 
-		vma_prev(vmg->vmi); /* Equivalent to going to the previous range */
+		/* In expand-only case we are already positioned at prev. */
+		if (!just_expand) {
+			/* Equivalent to going to the previous range. */
+			vma_prev(vmg->vmi);
+		}
 	}
 
 	/*
@@ -967,12 +972,14 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	}
 
 	/* If expansion failed, reset state. Allows us to retry merge later. */
-	vmg->vma = NULL;
-	vmg->start = start;
-	vmg->end = end;
-	vmg->pgoff = pgoff;
-	if (vmg->vma == prev)
-		vma_iter_set(vmg->vmi, start);
+	if (!just_expand) {
+		vmg->vma = NULL;
+		vmg->start = start;
+		vmg->end = end;
+		vmg->pgoff = pgoff;
+		if (vmg->vma == prev)
+			vma_iter_set(vmg->vmi, start);
+	}
 
 	return NULL;
 }
mm/vma.h +14 -0
index 819f994cf727..8c6ecc0dfbf6 100644
@@ -59,6 +59,17 @@ enum vma_merge_state {
 	VMA_MERGE_SUCCESS,
 };
 
+enum vma_merge_flags {
+	VMG_FLAG_DEFAULT = 0,
+	/*
+	 * If we can expand, simply do so. We know there is nothing to merge to
+	 * the right. Does not reset state upon failure to merge. The VMA
+	 * iterator is assumed to be positioned at the previous VMA, rather than
+	 * at the gap.
+	 */
+	VMG_FLAG_JUST_EXPAND = 1 << 0,
+};
+
 /* Represents a VMA merge operation. */
 struct vma_merge_struct {
 	struct mm_struct *mm;
@@ -75,6 +86,7 @@ struct vma_merge_struct {
 	struct mempolicy *policy;
 	struct vm_userfaultfd_ctx uffd_ctx;
 	struct anon_vma_name *anon_name;
+	enum vma_merge_flags merge_flags;
 	enum vma_merge_state state;
 };
 
@@ -99,6 +111,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.flags = flags_,					\
 		.pgoff = pgoff_,					\
 		.state = VMA_MERGE_START,				\
+		.merge_flags = VMG_FLAG_DEFAULT,			\
 	}
 
 #define VMG_VMA_STATE(name, vmi_, prev_, vma_, start_, end_)	\
@@ -118,6 +131,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.uffd_ctx = vma_->vm_userfaultfd_ctx,		\
 		.anon_name = anon_vma_name(vma_),		\
 		.state = VMA_MERGE_START,			\
+		.merge_flags = VMG_FLAG_DEFAULT,		\
 	}
 
 #ifdef CONFIG_DEBUG_VM_MAPLE_TREE

--
2.46.2

Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH hotfix 6.12 1/2] mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()

Quoted 4 lines · Lorenzo Stoakes

We know in advance that do_brk_flags() wants only to perform a VMA expansion (if the prior VMA is compatible), and that we assume no mergeable VMA follows it.

Quoted 8 lines

These are the semantics of this function prior to the recent rewrite of the VMA merging logic, however we are now doing more work than necessary - positioning the VMA iterator at the prior VMA and performing tasks that are not required.

Add a new field to the vmg struct to permit merge flags and add a new merge flag VMG_FLAG_JUST_EXPAND which implies this behaviour, and have do_brk_flags() use this.

Funny, I was thinking we could do this for relocate_vma_down() as well, bu that's expanding in the wrong direction so we'd have to add VMG_FLAG_JUST_EXPAND_DOWN, or the like. I'm not sure it's worth doing since the expand down happens a lot less often.

Quoted 7 lines

This fixes a reported performance regression in a brk() benchmarking suite.

Fixes cacded5e42b9 ("mm: avoid using vma_merge() for new VMAs")
Quoted 25 lines
---
 mm/mmap.c |  3 ++-
 mm/vma.c  | 23 +++++++++++++++--------
 mm/vma.h  | 14 ++++++++++++++
 3 files changed, 31 insertions(+), 9 deletions(-)
mm/mmap.c +2 -1
index dd4b35a25aeb..4a13d9f138f6 100644
@@ -1744,7 +1744,8 @@ static int do_brk_flags(struct vma_iterator *vmi, struct vm_area_struct *vma,
 		VMG_STATE(vmg, mm, vmi, addr, addr + len, flags, PHYS_PFN(addr));
 
 		vmg.prev = vma;
-		vma_iter_next_range(vmi);
+		/* vmi is positioned at prev, which this mode expects. */
+		vmg.merge_flags = VMG_FLAG_JUST_EXPAND;
 
 		if (vma_merge_new_range(&vmg))
 			goto out;
mm/vma.c +0 -0
index 4737afcb064c..b21ffec33f8e 100644

mm/vma.c struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg) · line 922

Quoted 6 lines
mm/vma.c +1 -0
@@ -917,6 +917,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	pgoff_t pgoff = vmg->pgoff;
 	pgoff_t pglen = PHYS_PFN(end - start);
 	bool can_merge_left, can_merge_right;
+	bool just_expand = vmg->merge_flags & VMG_FLAG_JUST_EXPAND;
 
 	mmap_assert_write_locked(vmg->mm);

Could we detect the wrong location by ensuring that the vma iterator is positioned at prev?

	VM_WARN_ON(just_expand && prev && prev->vm_end != vma_iter_end(vmg->vmi);

or, since vma_iter_addr is used above already..

	VM_WARN_ON(just_expand && prev && prev->start != vma_iter_addr(vmg->vmi);

Does it make sense to just expand without a prev? Should that be checked separately?

Anyways, I think it's safer to keep these checks out of the regression fix, but maybe better to add them later?

Quoted 92 lines
mm/vma.c +14 -8
 	VM_WARN_ON(vmg->vma);
@@ -930,7 +931,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		return NULL;
 
 	can_merge_left = can_vma_merge_left(vmg);
-	can_merge_right = can_vma_merge_right(vmg, can_merge_left);
+	can_merge_right = !just_expand && can_vma_merge_right(vmg, can_merge_left);
 
 	/* If we can merge with the next VMA, adjust vmg accordingly. */
 	if (can_merge_right) {
@@ -953,7 +954,11 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		if (can_merge_right && !can_merge_remove_vma(next))
 			vmg->end = end;
 
-		vma_prev(vmg->vmi); /* Equivalent to going to the previous range */
+		/* In expand-only case we are already positioned at prev. */
+		if (!just_expand) {
+			/* Equivalent to going to the previous range. */
+			vma_prev(vmg->vmi);
+		}
 	}
 
 	/*
@@ -967,12 +972,14 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	}
 
 	/* If expansion failed, reset state. Allows us to retry merge later. */
-	vmg->vma = NULL;
-	vmg->start = start;
-	vmg->end = end;
-	vmg->pgoff = pgoff;
-	if (vmg->vma == prev)
-		vma_iter_set(vmg->vmi, start);
+	if (!just_expand) {
+		vmg->vma = NULL;
+		vmg->start = start;
+		vmg->end = end;
+		vmg->pgoff = pgoff;
+		if (vmg->vma == prev)
+			vma_iter_set(vmg->vmi, start);
+	}
 
 	return NULL;
 }
mm/vma.h +14 -1
index 819f994cf727..8c6ecc0dfbf6 100644
@@ -59,6 +59,17 @@ enum vma_merge_state {
 	VMA_MERGE_SUCCESS,
 };
 
+enum vma_merge_flags {
+	VMG_FLAG_DEFAULT = 0,
+	/*
+	 * If we can expand, simply do so. We know there is nothing to merge to
+	 * the right. Does not reset state upon failure to merge. The VMA
+	 * iterator is assumed to be positioned at the previous VMA, rather than
+	 * at the gap.
+	 */
+	VMG_FLAG_JUST_EXPAND = 1 << 0,
+};
+
 /* Represents a VMA merge operation. */
 struct vma_merge_struct {
 	struct mm_struct *mm;
@@ -75,6 +86,7 @@ struct vma_merge_struct {
 	struct mempolicy *policy;
 	struct vm_userfaultfd_ctx uffd_ctx;
 	struct anon_vma_name *anon_name;
+	enum vma_merge_flags merge_flags;
 	enum vma_merge_state state;
 };
 
@@ -99,6 +111,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.flags = flags_,					\
 		.pgoff = pgoff_,					\
 		.state = VMA_MERGE_START,				\
+		.merge_flags = VMG_FLAG_DEFAULT,			\
 	}
 
 #define VMG_VMA_STATE(name, vmi_, prev_, vma_, start_, end_)	\
@@ -118,6 +131,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.uffd_ctx = vma_->vm_userfaultfd_ctx,		\
 		.anon_name = anon_vma_name(vma_),		\
 		.state = VMA_MERGE_START,			\
+		.merge_flags = VMG_FLAG_DEFAULT,		\
 	}
 
 #ifdef CONFIG_DEBUG_VM_MAPLE_TREE
--

2.46.2

#3 lore raw

Re: [PATCH hotfix 6.12 1/2] mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()

Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Lorenzo Stoakes

We know in advance that do_brk_flags() wants only to perform a VMA expansion (if the prior VMA is compatible), and that we assume no mergeable VMA follows it.

These are the semantics of this function prior to the recent rewrite of the VMA merging logic, however we are now doing more work than necessary - positioning the VMA iterator at the prior VMA and performing tasks that are not required.

Quoted 8 lines
Quoted 3 lines

Add a new field to the vmg struct to permit merge flags and add a new merge flag VMG_FLAG_JUST_EXPAND which implies this behaviour, and have do_brk_flags() use this.

Funny, I was thinking we could do this for relocate_vma_down() as well, bu that's expanding in the wrong direction so we'd have to add VMG_FLAG_JUST_EXPAND_DOWN, or the like. I'm not sure it's worth doing since the expand down happens a lot less often.

Yeah I think we have to carefully profile these and go case-by-case. My initial series to fix this made things worse :P as usual in perf developer instinct (in this case mine) is often miles off.

Quoted 50 lines
Quoted 8 lines

This fixes a reported performance regression in a brk() benchmarking suite.

Fixes cacded5e42b9 ("mm: avoid using vma_merge() for new VMAs")
Quoted 25 lines
---
 mm/mmap.c |  3 ++-
 mm/vma.c  | 23 +++++++++++++++--------
 mm/vma.h  | 14 ++++++++++++++
 3 files changed, 31 insertions(+), 9 deletions(-)
mm/mmap.c +2 -1
index dd4b35a25aeb..4a13d9f138f6 100644
@@ -1744,7 +1744,8 @@ static int do_brk_flags(struct vma_iterator *vmi, struct vm_area_struct *vma,
 		VMG_STATE(vmg, mm, vmi, addr, addr + len, flags, PHYS_PFN(addr));
 
 		vmg.prev = vma;
-		vma_iter_next_range(vmi);
+		/* vmi is positioned at prev, which this mode expects. */
+		vmg.merge_flags = VMG_FLAG_JUST_EXPAND;
 
 		if (vma_merge_new_range(&vmg))
 			goto out;
mm/vma.c +0 -0
index 4737afcb064c..b21ffec33f8e 100644

mm/vma.c struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg) · line 922

Quoted 6 lines
mm/vma.c +1 -0
@@ -917,6 +917,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	pgoff_t pgoff = vmg->pgoff;
 	pgoff_t pglen = PHYS_PFN(end - start);
 	bool can_merge_left, can_merge_right;
+	bool just_expand = vmg->merge_flags & VMG_FLAG_JUST_EXPAND;
 
 	mmap_assert_write_locked(vmg->mm);

Could we detect the wrong location by ensuring that the vma iterator is positioned at prev?

	VM_WARN_ON(just_expand && prev && prev->vm_end != vma_iter_end(vmg->vmi);

or, since vma_iter_addr is used above already..

Quoted 8 lines
	VM_WARN_ON(just_expand && prev && prev->start != vma_iter_addr(vmg->vmi);

Does it make sense to just expand without a prev? Should that be checked separately?

Anyways, I think it's safer to keep these checks out of the regression fix, but maybe better to add them later?

Yeah I do think it'd be worth adding some specific ones. But yeah perhaps let's add those later!

Quoted 94 lines
Quoted 94 lines
mm/vma.c +14 -8
 	VM_WARN_ON(vmg->vma);
@@ -930,7 +931,7 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		return NULL;
 
 	can_merge_left = can_vma_merge_left(vmg);
-	can_merge_right = can_vma_merge_right(vmg, can_merge_left);
+	can_merge_right = !just_expand && can_vma_merge_right(vmg, can_merge_left);
 
 	/* If we can merge with the next VMA, adjust vmg accordingly. */
 	if (can_merge_right) {
@@ -953,7 +954,11 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 		if (can_merge_right && !can_merge_remove_vma(next))
 			vmg->end = end;
 
-		vma_prev(vmg->vmi); /* Equivalent to going to the previous range */
+		/* In expand-only case we are already positioned at prev. */
+		if (!just_expand) {
+			/* Equivalent to going to the previous range. */
+			vma_prev(vmg->vmi);
+		}
 	}
 
 	/*
@@ -967,12 +972,14 @@ struct vm_area_struct *vma_merge_new_range(struct vma_merge_struct *vmg)
 	}
 
 	/* If expansion failed, reset state. Allows us to retry merge later. */
-	vmg->vma = NULL;
-	vmg->start = start;
-	vmg->end = end;
-	vmg->pgoff = pgoff;
-	if (vmg->vma == prev)
-		vma_iter_set(vmg->vmi, start);
+	if (!just_expand) {
+		vmg->vma = NULL;
+		vmg->start = start;
+		vmg->end = end;
+		vmg->pgoff = pgoff;
+		if (vmg->vma == prev)
+			vma_iter_set(vmg->vmi, start);
+	}
 
 	return NULL;
 }
mm/vma.h +14 -1
index 819f994cf727..8c6ecc0dfbf6 100644
@@ -59,6 +59,17 @@ enum vma_merge_state {
 	VMA_MERGE_SUCCESS,
 };
 
+enum vma_merge_flags {
+	VMG_FLAG_DEFAULT = 0,
+	/*
+	 * If we can expand, simply do so. We know there is nothing to merge to
+	 * the right. Does not reset state upon failure to merge. The VMA
+	 * iterator is assumed to be positioned at the previous VMA, rather than
+	 * at the gap.
+	 */
+	VMG_FLAG_JUST_EXPAND = 1 << 0,
+};
+
 /* Represents a VMA merge operation. */
 struct vma_merge_struct {
 	struct mm_struct *mm;
@@ -75,6 +86,7 @@ struct vma_merge_struct {
 	struct mempolicy *policy;
 	struct vm_userfaultfd_ctx uffd_ctx;
 	struct anon_vma_name *anon_name;
+	enum vma_merge_flags merge_flags;
 	enum vma_merge_state state;
 };
 
@@ -99,6 +111,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.flags = flags_,					\
 		.pgoff = pgoff_,					\
 		.state = VMA_MERGE_START,				\
+		.merge_flags = VMG_FLAG_DEFAULT,			\
 	}
 
 #define VMG_VMA_STATE(name, vmi_, prev_, vma_, start_, end_)	\
@@ -118,6 +131,7 @@ static inline pgoff_t vma_pgoff_offset(struct vm_area_struct *vma,
 		.uffd_ctx = vma_->vm_userfaultfd_ctx,		\
 		.anon_name = anon_vma_name(vma_),		\
 		.state = VMA_MERGE_START,			\
+		.merge_flags = VMG_FLAG_DEFAULT,		\
 	}
 
 #ifdef CONFIG_DEBUG_VM_MAPLE_TREE
--

2.46.2

#4 lore raw

PATCH 2/2 tools: testing: add expand-only mode VMA test

In reply to Lorenzo Stoakes

Add a test to assert that VMG_FLAG_JUST_EXPAND functions as expected - that is, when the VMA iterator is positioned at the previous VMA and no VMAs proceed it, we observe an expansion with all state as expected.

Explicitly place a prior VMA that would otherwise fail this test if the mode were not enabled (as it would traverse to the previous-previous VMA).

---
 tools/testing/vma/vma.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
tools/testing/vma/vma.c +40 -0
index c53f220eb6cc..b33b47342d41 100644
@@ -1522,6 +1522,45 @@ static bool test_copy_vma(void)
 	return true;
 }
 
+static bool test_expand_only_mode(void)
+{
+	unsigned long flags = VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE;
+	struct mm_struct mm = {};
+	VMA_ITERATOR(vmi, &mm, 0);
+	struct vm_area_struct *vma_prev, *vma;
+	VMG_STATE(vmg, &mm, &vmi, 0x5000, 0x9000, flags, 5);
+
+	/*
+	 * Place a VMA prior to the one we're expanding so we assert that we do
+	 * not erroneously try to traverse to the previous VMA even though we
+	 * have, through the use of VMG_FLAG_JUST_EXPAND, indicated we do not
+	 * need to do so.
+	 */
+	alloc_and_link_vma(&mm, 0, 0x2000, 0, flags);
+
+	/*
+	 * We will be positioned at the prev VMA, but looking to expand to
+	 * 0x9000.
+	 */
+	vma_iter_set(&vmi, 0x3000);
+	vma_prev = alloc_and_link_vma(&mm, 0x3000, 0x5000, 3, flags);
+	vmg.prev = vma_prev;
+	vmg.merge_flags = VMG_FLAG_JUST_EXPAND;
+
+	vma = vma_merge_new_range(&vmg);
+	ASSERT_NE(vma, NULL);
+	ASSERT_EQ(vma, vma_prev);
+	ASSERT_EQ(vmg.state, VMA_MERGE_SUCCESS);
+	ASSERT_EQ(vma->vm_start, 0x3000);
+	ASSERT_EQ(vma->vm_end, 0x9000);
+	ASSERT_EQ(vma->vm_pgoff, 3);
+	ASSERT_TRUE(vma_write_started(vma));
+	ASSERT_EQ(vma_iter_addr(&vmi), 0x3000);
+
+	cleanup_mm(&mm, &vmi);
+	return true;
+}
+
 int main(void)
 {
 	int num_tests = 0, num_fail = 0;
@@ -1553,6 +1592,7 @@ int main(void)
 	TEST(vmi_prealloc_fail);
 	TEST(merge_extend);
 	TEST(copy_vma);
+	TEST(expand_only_mode);
 
 #undef TEST
 

--
2.46.2