Add support for MediaTek MT7987 SoC
Subsystems (9)
cover Add support for MediaTek MT7987 SoC
This patch series add support for MediaTek MT7987 SoC with its reference boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these boards. The clock, pinctrl drivers and the SoC initializaton code are also included.
Weijie Gao (5):
clk: mediatek: add clock driver support for MediaTek MT7987 SoC
pinctrl: mediatek: add pinctrl driver for MT7987 SoC
mmc: mediatek: add support for MediaTek MT7987 SoCs
arm: mediatek: add support for MediaTek MT7987 SoC
board: mediatek: add MT7987 reference boards
arch/arm/dts/mt7987-emmc.dtsi | 50 ++ arch/arm/dts/mt7987-netsys-u-boot.dtsi | 51 ++ arch/arm/dts/mt7987-pinctrl-u-boot.dtsi | 146 +++ arch/arm/dts/mt7987-pinctrl.dtsi | 200 +++++ arch/arm/dts/mt7987-sd.dtsi | 37 + arch/arm/dts/mt7987.dtsi | 808 +++++++++++++++++ arch/arm/dts/mt7987a-emmc-rfb-u-boot.dtsi | 61 ++ arch/arm/dts/mt7987a-emmc-rfb.dts | 37 + arch/arm/dts/mt7987a-rfb-u-boot.dtsi | 71 ++ arch/arm/dts/mt7987a-rfb.dts | 34 + arch/arm/dts/mt7987a-sd-rfb-u-boot.dtsi | 59 ++ arch/arm/dts/mt7987a-sd-rfb.dts | 37 + arch/arm/dts/mt7987a-u-boot.dtsi | 66 ++ arch/arm/dts/mt7987a.dtsi | 96 ++ arch/arm/mach-mediatek/Kconfig | 19 +- arch/arm/mach-mediatek/Makefile | 2 + arch/arm/mach-mediatek/mt7987/Makefile | 4 + arch/arm/mach-mediatek/mt7987/init.c | 62 ++ arch/arm/mach-mediatek/mt7987/lowlevel_init.S | 30 + arch/arm/mach-mediatek/tzcfg.c | 242 +++++ board/mediatek/mt7987/MAINTAINERS | 8 + board/mediatek/mt7987/Makefile | 3 + board/mediatek/mt7987/mt7987_rfb.c | 10 + configs/mt7987_emmc_rfb_defconfig | 91 ++ configs/mt7987_rfb_defconfig | 87 ++ configs/mt7987_sd_rfb_defconfig | 91 ++ drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-mt7987.c | 848 ++++++++++++++++++ drivers/mmc/mtk-sd.c | 21 +- drivers/pinctrl/mediatek/Kconfig | 4 + drivers/pinctrl/mediatek/Makefile | 1 + drivers/pinctrl/mediatek/pinctrl-mt7987.c | 736 +++++++++++++++ include/configs/mt7987.h | 14 + .../dt-bindings/clock/mediatek,mt7987-clk.h | 206 +++++ 34 files changed, 4230 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/mt7987-emmc.dtsi create mode 100644 arch/arm/dts/mt7987-netsys-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987-pinctrl-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987-pinctrl.dtsi create mode 100644 arch/arm/dts/mt7987-sd.dtsi create mode 100644 arch/arm/dts/mt7987.dtsi create mode 100644 arch/arm/dts/mt7987a-emmc-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-emmc-rfb.dts create mode 100644 arch/arm/dts/mt7987a-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-rfb.dts create mode 100644 arch/arm/dts/mt7987a-sd-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-sd-rfb.dts create mode 100644 arch/arm/dts/mt7987a-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a.dtsi create mode 100644 arch/arm/mach-mediatek/mt7987/Makefile create mode 100644 arch/arm/mach-mediatek/mt7987/init.c create mode 100644 arch/arm/mach-mediatek/mt7987/lowlevel_init.S create mode 100644 arch/arm/mach-mediatek/tzcfg.c create mode 100644 board/mediatek/mt7987/MAINTAINERS create mode 100644 board/mediatek/mt7987/Makefile create mode 100644 board/mediatek/mt7987/mt7987_rfb.c create mode 100644 configs/mt7987_emmc_rfb_defconfig create mode 100644 configs/mt7987_rfb_defconfig create mode 100644 configs/mt7987_sd_rfb_defconfig create mode 100644 drivers/clk/mediatek/clk-mt7987.c create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7987.c create mode 100644 include/configs/mt7987.h create mode 100644 include/dt-bindings/clock/mediatek,mt7987-clk.h
Signature · 1 line
2.34.1
PATCH 1/5 clk: mediatek: add clock driver support for MediaTek MT7987 SoC
This patch adds clock driver support for MediaTek MT7987 SoC
--- drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-mt7987.c | 848 ++++++++++++++++++ .../dt-bindings/clock/mediatek,mt7987-clk.h | 206 +++++ 3 files changed, 1055 insertions(+) create mode 100644 drivers/clk/mediatek/clk-mt7987.c create mode 100644 include/dt-bindings/clock/mediatek,mt7987-clk.h
drivers/clk/mediatek/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_TARGET_MT7629) += clk-mt7629.o obj-$(CONFIG_TARGET_MT7986) += clk-mt7986.o obj-$(CONFIG_TARGET_MT7981) += clk-mt7981.o obj-$(CONFIG_TARGET_MT7988) += clk-mt7988.o +obj-$(CONFIG_TARGET_MT7987) += clk-mt7987.o obj-$(CONFIG_TARGET_MT8183) += clk-mt8183.o obj-$(CONFIG_TARGET_MT8365) += clk-mt8365.o obj-$(CONFIG_TARGET_MT8516) += clk-mt8516.o
drivers/clk/mediatek/clk-mt7987.c new file +848 -0
848 lines not on this page · raw message
include/dt-bindings/clock/mediatek,mt7987-clk.h new file +206 -0
206 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 2/5 pinctrl: mediatek: add pinctrl driver for MT7987 SoC
In reply to Weijie GaoThis patch adds pinctrl and gpio support for MT7987 SoC
--- drivers/pinctrl/mediatek/Kconfig | 4 + drivers/pinctrl/mediatek/Makefile | 1 + drivers/pinctrl/mediatek/pinctrl-mt7987.c | 736 ++++++++++++++++++++++ 3 files changed, 741 insertions(+) create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7987.c
drivers/pinctrl/mediatek/Kconfig +4 -0
@@ -24,6 +24,10 @@ config PINCTRL_MT7986 bool "MT7986 SoC pinctrl driver" select PINCTRL_MTK +config PINCTRL_MT7987 + bool "MT7987 SoC pinctrl driver" + select PINCTRL_MTK + config PINCTRL_MT7988 bool "MT7988 SoC pinctrl driver" select PINCTRL_MTK
drivers/pinctrl/mediatek/Makefile +1 -0
@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o obj-$(CONFIG_PINCTRL_MT7981) += pinctrl-mt7981.o obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o +obj-$(CONFIG_PINCTRL_MT7987) += pinctrl-mt7987.o obj-$(CONFIG_PINCTRL_MT7988) += pinctrl-mt7988.o obj-$(CONFIG_PINCTRL_MT8512) += pinctrl-mt8512.o obj-$(CONFIG_PINCTRL_MT8516) += pinctrl-mt8516.o
drivers/pinctrl/mediatek/pinctrl-mt7987.c new file +736 -0
736 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 3/5 mmc: mediatek: add support for MediaTek MT7987 SoCs
In reply to Weijie GaoThis patch adds eMMC/SD support for MT7987 SoC
--- drivers/mmc/mtk-sd.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/mmc/mtk-sd.c +19 -2
@@ -329,6 +329,7 @@ struct msdc_compatible {u8 clk_div_bits;bool pad_tune0;bool async_fifo; +bool async_fifo_crcsts;bool data_tune;bool busy_check;bool stop_clk_fix;
@@ -1553,8 +1554,12 @@ static void msdc_init_hw(struct msdc_host *host)/* use async fifo to avoid tune internal delay */ clrbits_le32 (&host->base->patch_bit2,MSDC_PB2_CFGRESP ); -clrbits_le32 (&host->base->patch_bit2, -MSDC_PB2_CFGCRCSTS ); +if (host->dev_comp->async_fifo_crcsts) +setbits_le32 (&host->base->patch_bit2, +MSDC_PB2_CFGCRCSTS ); +else +clrbits_le32 (&host->base->patch_bit2, +MSDC_PB2_CFGCRCSTS ); }if (host->dev_comp->data_tune) {
@@ -1844,6 +1849,17 @@ static const struct msdc_compatible mt7986_compat = { .enhance_rx = true, }; +static const struct msdc_compatible mt7987_compat = { + .clk_div_bits =12 , + .pad_tune0 = true, + .async_fifo = true, + .async_fifo_crcsts = true, + .data_tune = true, + .busy_check = true, + .stop_clk_fix = true, + .enhance_rx = true, +}; +static const struct msdc_compatible mt7981_compat = { .clk_div_bits =12 , .pad_tune0 = true,
@@ -1886,6 +1902,7 @@ static const struct udevice_id msdc_ids[] = { { .compatible = "mediatek,mt7622-mmc", .data = (ulong)&mt7622_compat }, { .compatible = "mediatek,mt7623-mmc", .data = (ulong)&mt7623_compat }, { .compatible = "mediatek,mt7986-mmc", .data = (ulong)&mt7986_compat }, + { .compatible = "mediatek,mt7987-mmc", .data = (ulong)&mt7987_compat }, { .compatible = "mediatek,mt7981-mmc", .data = (ulong)&mt7981_compat }, { .compatible = "mediatek,mt8512-mmc", .data = (ulong)&mt8512_compat }, { .compatible = "mediatek,mt8516-mmc", .data = (ulong)&mt8516_compat },
Signature · 1 line
2.34.1
PATCH 4/5 arm: mediatek: add support for MediaTek MT7987 SoC
In reply to Weijie GaoThis patch adds basic support for MediaTek MT7987 SoC. This includes files that will initialize the SoC after boot and its device tree.
In order to maximize the continuous usable memory space, MT7987 has its ATF BL31 loaded at the top of RAM. Since u-boot will also locate itself to top of RAM, u-boot will read the actual memory region of BL31 and set correct gd->ram_top to avoid u-boot overlapping with BL31.
As now support for mt7987 hasn't been submitted to linux kernel, all dts filed will be put to arch/arm/dts. They'll be removed after successfully being merged by linux kernel, and OF_UPSTREAM will also be switched on.
--- arch/arm/dts/mt7987-emmc.dtsi | 50 ++ arch/arm/dts/mt7987-netsys-u-boot.dtsi | 51 ++ arch/arm/dts/mt7987-pinctrl-u-boot.dtsi | 146 ++++ arch/arm/dts/mt7987-pinctrl.dtsi | 200 +++++ arch/arm/dts/mt7987-sd.dtsi | 37 + arch/arm/dts/mt7987.dtsi | 808 ++++++++++++++++++ arch/arm/dts/mt7987a-u-boot.dtsi | 66 ++ arch/arm/dts/mt7987a.dtsi | 96 +++ arch/arm/mach-mediatek/Kconfig | 19 +- arch/arm/mach-mediatek/Makefile | 2 + arch/arm/mach-mediatek/mt7987/Makefile | 4 + arch/arm/mach-mediatek/mt7987/init.c | 62 ++ arch/arm/mach-mediatek/mt7987/lowlevel_init.S | 30 + arch/arm/mach-mediatek/tzcfg.c | 242 ++++++ 14 files changed, 1812 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/mt7987-emmc.dtsi create mode 100644 arch/arm/dts/mt7987-netsys-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987-pinctrl-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987-pinctrl.dtsi create mode 100644 arch/arm/dts/mt7987-sd.dtsi create mode 100644 arch/arm/dts/mt7987.dtsi create mode 100644 arch/arm/dts/mt7987a-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a.dtsi create mode 100644 arch/arm/mach-mediatek/mt7987/Makefile create mode 100644 arch/arm/mach-mediatek/mt7987/init.c create mode 100644 arch/arm/mach-mediatek/mt7987/lowlevel_init.S create mode 100644 arch/arm/mach-mediatek/tzcfg.c
arch/arm/dts/mt7987-emmc.dtsi new file +50 -0
@@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) + +#include "mt7987-pinctrl.dtsi" + +/ { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +/* Disable spi0/spi1 node since MSDC shares pins with spi0 and spi1*/ +&spi0 { + status = "disabled"; +}; + +&spi1 { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc_pins_default>; + pinctrl-1 = <&mmc_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x12814>; + vqmmc-supply = <®_1p8v>; + vmmc-supply = <®_3p3v>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +};
arch/arm/dts/mt7987-netsys-u-boot.dtsi new file +51 -0
51 lines not on this page · raw message
arch/arm/dts/mt7987-pinctrl-u-boot.dtsi new file +146 -0
146 lines not on this page · raw message
arch/arm/dts/mt7987-pinctrl.dtsi new file +200 -0
200 lines not on this page · raw message
arch/arm/dts/mt7987-sd.dtsi new file +37 -0
@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "mt7987-pinctrl.dtsi" + +/ { + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +/* Disable spi0/spi1 node since MSDC shares pins with spi0 and spi1*/ +&spi0 { + status = "disabled"; +}; + +&spi1 { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd_pins_default>; + pinctrl-1 = <&sd_pins_uhs>; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + no-mmc; + no-sdio; + status = "okay"; +};
arch/arm/dts/mt7987.dtsi new file +808 -0
808 lines not on this page · raw message
arch/arm/dts/mt7987a-u-boot.dtsi new file +66 -0
66 lines not on this page · raw message
arch/arm/dts/mt7987a.dtsi new file +96 -0
96 lines not on this page · raw message
arch/arm/mach-mediatek/Kconfig +18 -1
@@ -59,6 +59,16 @@ config TARGET_MT7986 including UART, SPI, SPI flash, USB3.0, MMC, NAND, SNFI, PWM, PCIe, Gigabit Ethernet, I2C, built-in 4x4 Wi-Fi, and PCIe. +config TARGET_MT7987 + bool "MediaTek MT7987 SoC" + select ARM64 + select CPU + select MTK_TZ_MOVABLE + help + The MediaTek MT7987 is a ARM64-based SoC with a quad-core Cortex-A53. + including UART, I2C, PWM, SPI controller which support SPI flash, + USB3.0, MMC, PCIe, SGMII and built-in Ethernet PHY. + config TARGET_MT7988 bool "MediaTek MT7988 SoC" select ARM64
@@ -122,6 +132,7 @@ config SYS_BOARD default "mt7629" if TARGET_MT7629 default "mt7981" if TARGET_MT7981 default "mt7986" if TARGET_MT7986 + default "mt7987" if TARGET_MT7987 default "mt7988" if TARGET_MT7988 default "mt8183" if TARGET_MT8183 default "mt8512" if TARGET_MT8512
@@ -139,6 +150,7 @@ config SYS_CONFIG_NAME default "mt7629" if TARGET_MT7629 default "mt7981" if TARGET_MT7981 default "mt7986" if TARGET_MT7986 + default "mt7987" if TARGET_MT7987 default "mt7988" if TARGET_MT7988 default "mt8183" if TARGET_MT8183 default "mt8365" if TARGET_MT8365
@@ -150,7 +162,12 @@ config MTK_BROM_HEADER_INFO string default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622 default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183 - default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986 || TARGET_MT7988 + default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986 || TARGET_MT7987 || TARGET_MT7988 default "lk=1" if TARGET_MT7623 +config MTK_TZ_MOVABLE + select ARCH_MISC_INIT + select OF_SYSTEM_SETUP + bool + endif
arch/arm/mach-mediatek/Makefile +2 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += cpu.o +obj-$(CONFIG_MTK_TZ_MOVABLE) += tzcfg.o obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_MT8512) += mt8512/
@@ -9,6 +10,7 @@ obj-$(CONFIG_TARGET_MT7623) += mt7623/ obj-$(CONFIG_TARGET_MT7629) += mt7629/ obj-$(CONFIG_TARGET_MT7981) += mt7981/ obj-$(CONFIG_TARGET_MT7986) += mt7986/ +obj-$(CONFIG_TARGET_MT7987) += mt7987/ obj-$(CONFIG_TARGET_MT7988) += mt7988/ obj-$(CONFIG_TARGET_MT8183) += mt8183/ obj-$(CONFIG_TARGET_MT8365) += mt8365/
arch/arm/mach-mediatek/mt7987/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += init.o +obj-y += lowlevel_init.o
arch/arm/mach-mediatek/mt7987/init.c new file +62 -0
62 lines not on this page · raw message
arch/arm/mach-mediatek/mt7987/lowlevel_init.S new file +30 -0
@@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Sam Shih <[email protected]> + */ + +/* + * Switch from AArch64 EL2 to AArch32 EL2 + * @param inputs: + * x0: argument, zero + * x1: machine nr + * x2: fdt address + * x3: input argument + * x4: kernel entry point + * @param outputs for secure firmware: + * x0: function id + * x1: kernel entry point + * x2: machine nr + * x3: fdt address +*/ + +.global armv8_el2_to_aarch32 +armv8_el2_to_aarch32: + mov x3, x2 + mov x2, x1 + mov x1, x4 + mov x4, #0 + ldr x0, =0x82000200 + SMC #0 + ret
arch/arm/mach-mediatek/tzcfg.c new file +242 -0
242 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 5/5 board: mediatek: add MT7987 reference boards
In reply to Weijie GaoThis patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with one spi controller. So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
--- arch/arm/dts/mt7987a-emmc-rfb-u-boot.dtsi | 61 +++++++++++++++ arch/arm/dts/mt7987a-emmc-rfb.dts | 37 +++++++++ arch/arm/dts/mt7987a-rfb-u-boot.dtsi | 71 ++++++++++++++++++ arch/arm/dts/mt7987a-rfb.dts | 34 +++++++++ arch/arm/dts/mt7987a-sd-rfb-u-boot.dtsi | 59 +++++++++++++++ arch/arm/dts/mt7987a-sd-rfb.dts | 37 +++++++++ board/mediatek/mt7987/MAINTAINERS | 8 ++ board/mediatek/mt7987/Makefile | 3 + board/mediatek/mt7987/mt7987_rfb.c | 10 +++ configs/mt7987_emmc_rfb_defconfig | 91 +++++++++++++++++++++++ configs/mt7987_rfb_defconfig | 87 ++++++++++++++++++++++ configs/mt7987_sd_rfb_defconfig | 91 +++++++++++++++++++++++ include/configs/mt7987.h | 14 ++++ 13 files changed, 603 insertions(+) create mode 100644 arch/arm/dts/mt7987a-emmc-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-emmc-rfb.dts create mode 100644 arch/arm/dts/mt7987a-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-rfb.dts create mode 100644 arch/arm/dts/mt7987a-sd-rfb-u-boot.dtsi create mode 100644 arch/arm/dts/mt7987a-sd-rfb.dts create mode 100644 board/mediatek/mt7987/MAINTAINERS create mode 100644 board/mediatek/mt7987/Makefile create mode 100644 board/mediatek/mt7987/mt7987_rfb.c create mode 100644 configs/mt7987_emmc_rfb_defconfig create mode 100644 configs/mt7987_rfb_defconfig create mode 100644 configs/mt7987_sd_rfb_defconfig create mode 100644 include/configs/mt7987.h
arch/arm/dts/mt7987a-emmc-rfb-u-boot.dtsi new file +61 -0
@@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "mt7987a-u-boot.dtsi" +#include "mt7987-netsys-u-boot.dtsi" + +/ { + model = "mt7987"; + compatible = "mediatek,mt7987", "mediatek,mt7987-emmc-rfb"; +}; + +ð0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins>; + phy-mode = "2500base-x"; + mediatek,switch = "auto"; + reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins_default>; + max-frequency = <48000000>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + /delete-node/ spi_nor@0; + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +};
arch/arm/dts/mt7987a-emmc-rfb.dts new file +37 -0
@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7987a.dtsi" +#include "mt7987-emmc.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "MediaTek MT7987 EMMC RFB"; + compatible = "mediatek,mt7987a-emmc", + "mediatek,mt7987a", "mediatek,mt7987"; + + chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 \ + earlycon=uart8250,mmio32,0x11000000 \ + pci=pcie_bus_perf ubi.block=0,firmware \ + root=/dev/fit0 rootwait"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + }; +};
arch/arm/dts/mt7987a-rfb-u-boot.dtsi new file +71 -0
71 lines not on this page · raw message
arch/arm/dts/mt7987a-rfb.dts new file +34 -0
@@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7987a.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "MediaTek MT7987A RFB"; + compatible = "mediatek,mt7987a", "mediatek,mt7987"; + + chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 \ + earlycon=uart8250,mmio32,0x11000000 \ + pci=pcie_bus_perf"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + }; +};
arch/arm/dts/mt7987a-sd-rfb-u-boot.dtsi new file +59 -0
59 lines not on this page · raw message
arch/arm/dts/mt7987a-sd-rfb.dts new file +37 -0
@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7987a.dtsi" +#include "mt7987-sd.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "MediaTek MT7987 SD RFB"; + compatible = "mediatek,mt7987a-sd", + "mediatek,mt7987a", "mediatek,mt7987"; + + chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 \ + earlycon=uart8250,mmio32,0x11000000 \ + pci=pcie_bus_perf ubi.block=0,firmware \ + root=/dev/fit0 rootwait"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + }; + }; +};
board/mediatek/mt7987/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +MT7987 +M: Sam Shih <[email protected]> +S: Maintained +F: board/mediatek/mt7987 +F: include/configs/mt7987.h +F: configs/mt7987_rfb_defconfig +F: configs/mt7987_emmc_rfb_defconfig +F: configs/mt7987_sd_rfb_defconfig
board/mediatek/mt7987/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += mt7987_rfb.o
board/mediatek/mt7987/mt7987_rfb.c new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2025 MediaTek Inc. +* Author: Sam Shih <[email protected]> +*/ + +int board_init (void ) +{ +return 0 ; +}
configs/mt7987_emmc_rfb_defconfig new file +91 -0
91 lines not on this page · raw message
configs/mt7987_rfb_defconfig new file +87 -0
87 lines not on this page · raw message
configs/mt7987_sd_rfb_defconfig new file +91 -0
91 lines not on this page · raw message
include/configs/mt7987.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Configuration for MediaTek MT7987 SoC +* +* Copyright (C) 2025 MediaTek Inc. +* Author: Sam Shih <[email protected]> +*/ + +#ifndef __MT7987_H +#define __MT7987_H + +#define CFG_MAX_MEM_MAPPED 0xC0000000 + +#endif
Signature · 1 line
2.34.1
Quoted 8 lines · Weijie Gao
This patch series add support for MediaTek MT7987 SoC with its reference boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these boards. The clock, pinctrl drivers and the SoC initializaton code are also included.
[...]
Applied to u-boot/master, thanks!
Signature · 1 line
Tom