Skip to contentSkip to conversation

Fix a BUG_ON crashing the kernel in start_this_handle

PATCH Superseded Ojaswin Mujoo 2 participants 6 messages Mar 14, 2025 ext4 file system

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Ojaswin Mujoo

author reviewer
#0 lore raw

v3 cover Fix a BUG_ON crashing the kernel in start_this_handle

** Changes in v3 [3] **

* Picked RVBs from Jan and Baokun
* In patch 2/3 we now do the following:
set flag -> force commit -> flush wq
* use sbi->s_mount_flags instead of an
sbi field for journal destroy flag

[3] https://lore.kernel.org/linux-ext4/[email protected]/T/#m3a6c2e9205381d86460267e7be37ae0db688b800

** Changes in v2 [1] **

* Picked up RVBs from Jan and Ritesh
* In patch 2/3, we now use a flag in sbi instead of SB_ACITVE to determine when to journal sb vs when to commit directly.
* Added a prep patch 1/3

[1] https://lore.kernel.org/linux-ext4/[email protected]/T/#m5e659425b8c8fe2ac01e7242b77fed315ff89db4

@Baokun, I didn't get a chance to look into the journal_inode modifications we were discussing in [2]. I'll try to spend some time and send that as a separate patch. Hope that's okay

[2] https://lore.kernel.org/linux-ext4/[email protected]/T/#mad8feb44d9b6ddadf87830b92caa7b78d902dc05

** Original Cover **

When running LTP stress tests on ext4, after a multiday run we seemed to have hit the following BUG_ON:

[NIP : start_this_handle+268]
#3 [c000001067c27a40] start_this_handle at c008000004d40f74 [jbd2] (unreliable) #4 [c000001067c27b60] jbd2__journal_start at c008000004d415cc [jbd2] #5 [c000001067c27be0] update_super_work at c0080000053f9758 [ext4] #6 [c000001067c27c70] process_one_work at c000000000188790
#7 [c000001067c27d20] worker_thread at c00000000018973c
#8 [c000001067c27dc0] kthread at c000000000196c84
#9 [c000001067c27e10] ret_from_kernel_thread at c00000000000cd64

Which comes out to

382 repeat:

  383           read_lock(&journal->j_state_lock);
* 384           BUG_ON(journal->j_flags & JBD2_UNMOUNT);
  385           if (is_journal_aborted(journal) ||

386 (journal->j_errno != 0 && !(journal->j_flags & JBD2_ACK_ERR))) {
387 read_unlock(&journal->j_state_lock);

Initially this seemed like it should never happen but upon crash analysis it seems like it could indeed be hit as described in patch 1/2.

I would like to add that through the logs we only knew that:

- ext4_journal_bmap -> ext4_map_blocks is failing with EFSCORRUPTED.
- update_super_work had hit the BUG_ON

I was not able to hit this bug again (without modifying the kernel to inject errors) but the above backtrace seems to be one possible paths where this BUG_ON can be hit. Rest of the analysis and fix is in patch 2/3. Patch 3 is just a small tweak that i found helpful while debugging.

That being said, journalling is something I'm not very familiar with and there might be gaps in my understanding so thoughts and suggestions are welcome.

Ojaswin Mujoo (3):
ext4: define ext4_journal_destroy wrapper
ext4: avoid journaling sb update on error if journal is destroying
ext4: Make sb update interval tunable

 fs/ext4/ext4.h      | 10 ++++++++++
 fs/ext4/ext4_jbd2.h | 29 +++++++++++++++++++++++++++++
 fs/ext4/super.c     | 43 ++++++++++++++++++++-----------------------
 fs/ext4/sysfs.c     |  4 ++++
 4 files changed, 63 insertions(+), 23 deletions(-)
Signature · 1 line
2.48.1
author reviewer
#1 lore raw

PATCH v3 1/3 ext4: define ext4_journal_destroy wrapper

Define an ext4 wrapper over jbd2_journal_destroy to make sure we have consistent behavior during journal destruction. This will also come useful in the next patch where we add some ext4 specific logic in the destroy path.

Reviewed-by Jan Kara <[email protected]>
Reviewed-by Baokun Li <[email protected]>
Signed-off-by Ojaswin Mujoo <[email protected]>
---
 fs/ext4/ext4_jbd2.h | 14 ++++++++++++++
 fs/ext4/super.c     | 16 ++++++----------
 2 files changed, 20 insertions(+), 10 deletions(-)
fs/ext4/ext4_jbd2.h +14 -0
index 3f2596c9e5f2..9b3c9df02a39 100644
@@ -429,4 +429,18 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
 	return 1;
 }
 
+/*
+ * Pass journal explicitly as it may not be cached in the sbi->s_journal in some
+ * cases
+ */
+static inline int ext4_journal_destroy(struct ext4_sb_info *sbi, journal_t *journal)
+{
+	int err = 0;
+
+	err = jbd2_journal_destroy(journal);
+	sbi->s_journal = NULL;
+
+	return err;
+}
+
 #endif	/* _EXT4_JBD2_H */
fs/ext4/super.c +6 -10
index a963ffda692a..8ad664d47806 100644
@@ -1297,8 +1297,7 @@ static void ext4_put_super(struct super_block *sb)
 
 	if (sbi->s_journal) {
 		aborted = is_journal_aborted(sbi->s_journal);
-		err = jbd2_journal_destroy(sbi->s_journal);
-		sbi->s_journal = NULL;
+		err = ext4_journal_destroy(sbi, sbi->s_journal);
 		if ((err < 0) && !aborted) {
 			ext4_abort(sb, -err, "Couldn't clean up the journal");
 		}

@@ -4960,8 +4959,7 @@ static int ext4_load_and_init_journal(struct super_block *sb,
 out:
 	/* flush s_sb_upd_work before destroying the journal. */
 	flush_work(&sbi->s_sb_upd_work);
-	jbd2_journal_destroy(sbi->s_journal);
-	sbi->s_journal = NULL;
+	ext4_journal_destroy(sbi, sbi->s_journal);
 	return -EINVAL;
 }
 

@@ -5652,8 +5650,7 @@ failed_mount8: __maybe_unused
 	if (sbi->s_journal) {
 		/* flush s_sb_upd_work before journal destroy. */
 		flush_work(&sbi->s_sb_upd_work);
-		jbd2_journal_destroy(sbi->s_journal);
-		sbi->s_journal = NULL;
+		ext4_journal_destroy(sbi, sbi->s_journal);
 	}
 failed_mount3a:
 	ext4_es_unregister_shrinker(sbi);

@@ -5958,7 +5955,7 @@ static journal_t *ext4_open_dev_journal(struct super_block *sb,
 	return journal;
 
 out_journal:
-	jbd2_journal_destroy(journal);
+	ext4_journal_destroy(EXT4_SB(sb), journal);
 out_bdev:
 	bdev_fput(bdev_file);
 	return ERR_PTR(errno);

@@ -6075,8 +6072,7 @@ static int ext4_load_journal(struct super_block *sb,
 	EXT4_SB(sb)->s_journal = journal;
 	err = ext4_clear_journal_err(sb, es);
 	if (err) {
-		EXT4_SB(sb)->s_journal = NULL;
-		jbd2_journal_destroy(journal);
+		ext4_journal_destroy(EXT4_SB(sb), journal);
 		return err;
 	}
 

@@ -6094,7 +6090,7 @@ static int ext4_load_journal(struct super_block *sb,
 	return 0;
 
 err_out:
-	jbd2_journal_destroy(journal);
+	ext4_journal_destroy(EXT4_SB(sb), journal);
 	return err;
 }
Signature · 1 line
2.48.1
author reviewer
#2 lore raw

PATCH v3 2/3 ext4: avoid journaling sb update on error if journal is destroying

In reply to Ojaswin Mujoo

Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg:

(umount)
ext4_kill_sb
kill_block_super

    generic_shutdown_super
      sync_filesystem /* commits all txns */
      evict_inodes
        /* might start a new txn */
      ext4_put_super
	flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
        jbd2_journal_destroy
          journal_kill_thread
            journal->j_flags |= JBD2_UNMOUNT;
          jbd2_journal_commit_transaction
            jbd2_journal_get_descriptor_buffer
              jbd2_journal_bmap
                ext4_journal_bmap
                  ext4_map_blocks
                    ...
                    ext4_inode_error
                      ext4_handle_error
                        schedule_work(&sbi->s_sb_upd_work)

                                               /* work queue kicks in */
                                               update_super_work
                                                 jbd2_journal_start
                                                   start_this_handle
                                                     BUG_ON(journal->j_flags &
                                                            JBD2_UNMOUNT)

Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit.

Further, in the journal destroy path, we have the following sequence:

1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates

This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606)

Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

Fixes 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Reported-by Mahesh Kumar <[email protected]>
Signed-off-by Ojaswin Mujoo <[email protected]>
---
 fs/ext4/ext4.h      |  1 +
 fs/ext4/ext4_jbd2.h | 15 +++++++++++++++
 fs/ext4/super.c     | 12 ++++++------
 3 files changed, 22 insertions(+), 6 deletions(-)
fs/ext4/ext4.h +1 -0
index 2b7d781bfcad..ee54b8510791 100644
@@ -1179,6 +1179,7 @@ struct ext4_inode_info {
 #define	EXT4_ERROR_FS			0x0002	/* Errors detected */
 #define	EXT4_ORPHAN_FS			0x0004	/* Orphans being recovered */
 #define EXT4_FC_REPLAY			0x0020	/* Fast commit replay ongoing */
+#define EXT4_JOURNAL_DESTORY		0x0040	/* Journal is in process of destroying */
 
 /*
  * Misc. filesystem flags
fs/ext4/ext4_jbd2.h +15 -0
index 9b3c9df02a39..f054db9fa9e1 100644
@@ -437,6 +437,21 @@ static inline int ext4_journal_destroy(struct ext4_sb_info *sbi, journal_t *jour
 {
 	int err = 0;
 
+	/*
+	 * At this point only two things can be operating on the journal.
+	 * JBD2 thread performing transaction commit and s_sb_upd_work
+	 * issuing sb update through the journal. Once we set
+	 * EXT4_JOURNAL_DESTROY, new ext4_handle_error() calls will not
+	 * queue s_sb_upd_work and ext4_force_commit() makes sure any
+	 * ext4_handle_error() calls from the running transaction commit are
+	 * finished. Hence no new s_sb_upd_work can be queued after we
+	 * flush it here.
+	 */
+	ext4_set_mount_flag(sbi->s_sb, EXT4_JOURNAL_DESTORY);
+
+	ext4_force_commit(sbi->s_sb);
+	flush_work(&sbi->s_sb_upd_work);
+
 	err = jbd2_journal_destroy(journal);
 	sbi->s_journal = NULL;
fs/ext4/super.c +6 -6
index 8ad664d47806..54ef0cc566a4 100644
@@ -704,9 +704,13 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error,
 		 * In case the fs should keep running, we need to writeout
 		 * superblock through the journal. Due to lock ordering
 		 * constraints, it may not be safe to do it right here so we
-		 * defer superblock flushing to a workqueue.
+		 * defer superblock flushing to a workqueue. We just need to be
+		 * careful when the journal is already shutting down. If we get
+		 * here in that case, just update the sb directly as the last
+		 * transaction won't commit anyway.
 		 */
-		if (continue_fs && journal)
+		if (continue_fs && journal &&
+		    !ext4_test_mount_flag(sb, EXT4_JOURNAL_DESTORY))
 			schedule_work(&EXT4_SB(sb)->s_sb_upd_work);
 		else
 			ext4_commit_super(sb);

@@ -4957,8 +4961,6 @@ static int ext4_load_and_init_journal(struct super_block *sb,
 	return 0;
 
 out:
-	/* flush s_sb_upd_work before destroying the journal. */
-	flush_work(&sbi->s_sb_upd_work);
 	ext4_journal_destroy(sbi, sbi->s_journal);
 	return -EINVAL;
 }

@@ -5648,8 +5650,6 @@ failed_mount8: __maybe_unused
 	sbi->s_ea_block_cache = NULL;
 
 	if (sbi->s_journal) {
-		/* flush s_sb_upd_work before journal destroy. */
-		flush_work(&sbi->s_sb_upd_work);
 		ext4_journal_destroy(sbi, sbi->s_journal);
 	}
 failed_mount3a:
Signature · 1 line
2.48.1
reviewer
#3 lore raw

Re: [PATCH v3 2/3] ext4: avoid journaling sb update on error if journal is destroying

Quoted 49 lines · Ojaswin Mujoo

Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg:

(umount)
ext4_kill_sb
kill_block_super

    generic_shutdown_super
      sync_filesystem /* commits all txns */
      evict_inodes
        /* might start a new txn */
      ext4_put_super
	flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
        jbd2_journal_destroy
          journal_kill_thread
            journal->j_flags |= JBD2_UNMOUNT;
          jbd2_journal_commit_transaction
            jbd2_journal_get_descriptor_buffer
              jbd2_journal_bmap
                ext4_journal_bmap
                  ext4_map_blocks
                    ...
                    ext4_inode_error
                      ext4_handle_error
                        schedule_work(&sbi->s_sb_upd_work)

                                               /* work queue kicks in */
                                               update_super_work
                                                 jbd2_journal_start
                                                   start_this_handle
                                                     BUG_ON(journal->j_flags &
                                                            JBD2_UNMOUNT)

Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit.

Further, in the journal destroy path, we have the following sequence:

1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates

This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606)

Quoted 6 lines

Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

Fixes 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Reported-by Mahesh Kumar <[email protected]>
Signed-off-by Ojaswin Mujoo <[email protected]>

Mostly looks good. Couple of small comments below:

fs/ext4/ext4.h struct ext4_inode_info { · line 1182

Quoted 7 lines
fs/ext4/ext4.h +1 -0
@@ -1179,6 +1179,7 @@ struct ext4_inode_info {
 #define	EXT4_ERROR_FS			0x0002	/* Errors detected */
 #define	EXT4_ORPHAN_FS			0x0004	/* Orphans being recovered */
 #define EXT4_FC_REPLAY			0x0020	/* Fast commit replay ongoing */
+#define EXT4_JOURNAL_DESTORY		0x0040	/* Journal is in process of destroying */

This should be defined as part of the following enum:

/*
* run-time mount flags
*/
enum {
EXT4_MF_MNTDIR_SAMPLED,
EXT4_MF_FC_INELIGIBLE /* Fast commit ineligible */
};

Also you have a typo in the flag name. I guess it should be EXT4_MF_JOURNAL_DESTROY.

Quoted 10 lines
fs/ext4/ext4.h +0 -2
@@ -4957,8 +4961,6 @@ static int ext4_load_and_init_journal(struct super_block *sb,
 	return 0;
 
 out:
-	/* flush s_sb_upd_work before destroying the journal. */
-	flush_work(&sbi->s_sb_upd_work);
 	ext4_journal_destroy(sbi, sbi->s_journal);
 	return -EINVAL;
 }

fs/ext4/ext4.h failed_mount8: __maybe_unused · line 5655

Quoted 8 lines
fs/ext4/ext4.h +0 -2
@@ -5648,8 +5650,6 @@ failed_mount8: __maybe_unused
 	sbi->s_ea_block_cache = NULL;
 
 	if (sbi->s_journal) {
-		/* flush s_sb_upd_work before journal destroy. */
-		flush_work(&sbi->s_sb_upd_work);
 		ext4_journal_destroy(sbi, sbi->s_journal);
 	}
 failed_mount3a:

These are good. I would also move the flush_work() in ext4_put_super() into else branch of:

	if (sbi->s_journal)

								Honza
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
author reviewer
#4 lore raw

Re: [PATCH v3 2/3] ext4: avoid journaling sb update on error if journal is destroying

Quoted 69 lines · Jan Kara
Quoted 49 lines · Ojaswin Mujoo

Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg:

(umount)
ext4_kill_sb
kill_block_super

    generic_shutdown_super
      sync_filesystem /* commits all txns */
      evict_inodes
        /* might start a new txn */
      ext4_put_super
	flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
        jbd2_journal_destroy
          journal_kill_thread
            journal->j_flags |= JBD2_UNMOUNT;
          jbd2_journal_commit_transaction
            jbd2_journal_get_descriptor_buffer
              jbd2_journal_bmap
                ext4_journal_bmap
                  ext4_map_blocks
                    ...
                    ext4_inode_error
                      ext4_handle_error
                        schedule_work(&sbi->s_sb_upd_work)

                                               /* work queue kicks in */
                                               update_super_work
                                                 jbd2_journal_start
                                                   start_this_handle
                                                     BUG_ON(journal->j_flags &
                                                            JBD2_UNMOUNT)

Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit.

Further, in the journal destroy path, we have the following sequence:

1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates

This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606)

Quoted 6 lines

Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

Fixes 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Reported-by Mahesh Kumar <[email protected]>
Signed-off-by Ojaswin Mujoo <[email protected]>

Mostly looks good. Couple of small comments below:

fs/ext4/ext4.h struct ext4_inode_info { · line 1182

Quoted 7 lines
fs/ext4/ext4.h +1 -0
@@ -1179,6 +1179,7 @@ struct ext4_inode_info {
 #define	EXT4_ERROR_FS			0x0002	/* Errors detected */
 #define	EXT4_ORPHAN_FS			0x0004	/* Orphans being recovered */
 #define EXT4_FC_REPLAY			0x0020	/* Fast commit replay ongoing */
+#define EXT4_JOURNAL_DESTORY		0x0040	/* Journal is in process of destroying */

This should be defined as part of the following enum:

Quoted 7 lines

/*
* run-time mount flags
*/
enum {
EXT4_MF_MNTDIR_SAMPLED,
EXT4_MF_FC_INELIGIBLE /* Fast commit ineligible */
};

Right, I'll fix that

Quoted 3 lines

Also you have a typo in the flag name. I guess it should be EXT4_MF_JOURNAL_DESTROY.

I ended up making the same typo as before :)

Quoted 23 lines
Quoted 11 lines
fs/ext4/ext4.h +0 -2
@@ -4957,8 +4961,6 @@ static int ext4_load_and_init_journal(struct super_block *sb,
 	return 0;
 
 out:
-	/* flush s_sb_upd_work before destroying the journal. */
-	flush_work(&sbi->s_sb_upd_work);
 	ext4_journal_destroy(sbi, sbi->s_journal);
 	return -EINVAL;
 }

fs/ext4/ext4.h failed_mount8: __maybe_unused · line 5655

Quoted 8 lines
fs/ext4/ext4.h +0 -2
@@ -5648,8 +5650,6 @@ failed_mount8: __maybe_unused
 	sbi->s_ea_block_cache = NULL;
 
 	if (sbi->s_journal) {
-		/* flush s_sb_upd_work before journal destroy. */
-		flush_work(&sbi->s_sb_upd_work);
 		ext4_journal_destroy(sbi, sbi->s_journal);
 	}
 failed_mount3a:

These are good. I would also move the flush_work() in ext4_put_super() into else branch of:

Quoted 1 line
	if (sbi->s_journal)

Right I thought of that but then let it be for simplicity. But sure I'll add this in the next revision.

Thanks for the review Jan.

Quoted 6 lines

Honza

Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
author reviewer
#5 lore raw

PATCH v3 3/3 ext4: Make sb update interval tunable

In reply to Ojaswin Mujoo

Currently, outside error paths, we auto commit the super block after 1 hour has passed and 16MB worth of updates have been written since last commit. This is a policy decision so make this tunable while keeping the defaults same. This is useful if user wants to tweak the superblock behavior or for debugging the codepath by allowing to trigger it more frequently.

We can now tweak the super block update using sb_update_sec and sb_update_kb files in /sys/fs/ext4/<dev>/

Reviewed-by Jan Kara <[email protected]>
Reviewed-by Ritesh Harjani (IBM) <[email protected]>
Reviewed-by Baokun Li <[email protected]>
Signed-off-by Ojaswin Mujoo <[email protected]>
---
 fs/ext4/ext4.h  |  9 +++++++++
 fs/ext4/super.c | 15 ++++++++-------
 fs/ext4/sysfs.c |  4 ++++
 3 files changed, 21 insertions(+), 7 deletions(-)
fs/ext4/ext4.h +9 -0
index ee54b8510791..23c3e3ced9e6 100644
@@ -1609,6 +1609,8 @@ struct ext4_sb_info {
 	unsigned int s_mb_prefetch;
 	unsigned int s_mb_prefetch_limit;
 	unsigned int s_mb_best_avail_max_trim_order;
+	unsigned int s_sb_update_sec;
+	unsigned int s_sb_update_kb;
 
 	/* stats for buddy allocator */
 	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */

@@ -2280,6 +2282,13 @@ static inline int ext4_forced_shutdown(struct super_block *sb)
 #define EXT4_DEF_MIN_BATCH_TIME	0
 #define EXT4_DEF_MAX_BATCH_TIME	15000 /* 15ms */
 
+/*
+ * Default values for superblock update
+ */
+#define EXT4_DEF_SB_UPDATE_INTERVAL_SEC (3600) /* seconds (1 hour) */
+#define EXT4_DEF_SB_UPDATE_INTERVAL_KB (16384) /* kilobytes (16MB) */
+
+
 /*
  * Minimum number of groups in a flexgroup before we separate out
  * directories into the first block group of a flexgroup
fs/ext4/super.c +8 -7
index 54ef0cc566a4..c97ca78bd48a 100644
@@ -447,9 +447,6 @@ static time64_t __ext4_get_tstamp(__le32 *lo, __u8 *hi)
 #define ext4_get_tstamp(es, tstamp) \
 	__ext4_get_tstamp(&(es)->tstamp, &(es)->tstamp ## _hi)
 
-#define EXT4_SB_REFRESH_INTERVAL_SEC (3600) /* seconds (1 hour) */
-#define EXT4_SB_REFRESH_INTERVAL_KB (16384) /* kilobytes (16MB) */
-
 /*
  * The ext4_maybe_update_superblock() function checks and updates the
  * superblock if needed.

@@ -457,8 +454,10 @@ static time64_t __ext4_get_tstamp(__le32 *lo, __u8 *hi)
  * This function is designed to update the on-disk superblock only under
  * certain conditions to prevent excessive disk writes and unnecessary
  * waking of the disk from sleep. The superblock will be updated if:
- * 1. More than an hour has passed since the last superblock update, and
- * 2. More than 16MB have been written since the last superblock update.
+ * 1. More than sbi->s_sb_update_sec (def: 1 hour) has passed since the last
+ *    superblock update
+ * 2. More than sbi->s_sb_update_kb (def: 16MB) kbs have been written since the
+ *    last superblock update.
  *
  * @sb: The superblock
  */

@@ -479,7 +478,7 @@ static void ext4_maybe_update_superblock(struct super_block *sb)
 	now = ktime_get_real_seconds();
 	last_update = ext4_get_tstamp(es, s_wtime);
 
-	if (likely(now - last_update < EXT4_SB_REFRESH_INTERVAL_SEC))
+	if (likely(now - last_update < sbi->s_sb_update_sec))
 		return;
 
 	lifetime_write_kbytes = sbi->s_kbytes_written +

@@ -494,7 +493,7 @@ static void ext4_maybe_update_superblock(struct super_block *sb)
 	 */
 	diff_size = lifetime_write_kbytes - le64_to_cpu(es->s_kbytes_written);
 
-	if (diff_size > EXT4_SB_REFRESH_INTERVAL_KB)
+	if (diff_size > sbi->s_sb_update_kb)
 		schedule_work(&EXT4_SB(sb)->s_sb_upd_work);
 }
 

@@ -5248,6 +5247,8 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
 	sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
+	sbi->s_sb_update_kb = EXT4_DEF_SB_UPDATE_INTERVAL_KB;
+	sbi->s_sb_update_sec = EXT4_DEF_SB_UPDATE_INTERVAL_SEC;
 
 	/*
 	 * set default s_li_wait_mult for lazyinit, for the case there is
fs/ext4/sysfs.c +4 -0
index ddb54608ca2e..987bd00f916a 100644
@@ -254,6 +254,8 @@ EXT4_ATTR(journal_task, 0444, journal_task);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch, s_mb_prefetch);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch_limit, s_mb_prefetch_limit);
 EXT4_RW_ATTR_SBI_UL(last_trim_minblks, s_last_trim_minblks);
+EXT4_RW_ATTR_SBI_UI(sb_update_sec, s_sb_update_sec);
+EXT4_RW_ATTR_SBI_UI(sb_update_kb, s_sb_update_kb);
 
 static unsigned int old_bump_val = 128;
 EXT4_ATTR_PTR(max_writeback_mb_bump, 0444, pointer_ui, &old_bump_val);

@@ -305,6 +307,8 @@ static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(mb_prefetch),
 	ATTR_LIST(mb_prefetch_limit),
 	ATTR_LIST(last_trim_minblks),
+	ATTR_LIST(sb_update_sec),
+	ATTR_LIST(sb_update_kb),
 	NULL,
 };
 ATTRIBUTE_GROUPS(ext4);
Signature · 1 line
2.48.1