arm64: rockchip: Two more additions to rockchip_v8_defconfig
Subsystems (2)
cover arm64: rockchip: Two more additions to rockchip_v8_defconfig
Hello,
while working to support the Qnap TS-433 NAS I found the config items enabled here quite useful. I'm not entirely sure that enabling generic fit image is useful in general (also because it comes with a build dependency on python3-libfdt), still here comes a suggestion to enable it.
Best regards
Uwe
Uwe Kleine-König (2):
arm64: rockchip: Enable rockchip otp driver in defconfig
arm64: rockchip: Enable generic fit image
arch/arm/configs/rockchip_v8_defconfig | 3 +++ 1 file changed, 3 insertions(+)
base-commit: 9ecf814ff511c6dd6dcbbb2642d1ae9b11a20f8c
Signature · 1 line
2.47.1
PATCH 1/2 arm64: rockchip: Enable rockchip otp driver in defconfig
This driver is useful on rk3308, rk3568 and rk3588. Enable it in rockchip_v8_defconfig.
--- arch/arm/configs/rockchip_v8_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/rockchip_v8_defconfig +2 -0
@@ -135,6 +135,8 @@ CONFIG_LED_GPIO_OF=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_POLLER=y CONFIG_WATCHDOG_DW=y +CONFIG_NVMEM=y +CONFIG_NVMEM_ROCKCHIP_OTP=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED=y CONFIG_REGULATOR_ARM_SCMI=y
Signature · 1 line
2.47.1
Sascha Hauer
AppliedRe: (subset) [PATCH 1/2] arm64: rockchip: Enable rockchip otp driver in defconfig
Quoted 4 lines · Uwe Kleine-König
This driver is useful on rk3308, rk3568 and rk3588. Enable it in
rockchip_v8_defconfig.
Applied, thanks!
[1/2] arm64: rockchip: Enable rockchip otp driver in defconfig
https://git.pengutronix.de/cgit/barebox/commit/?id=6c87417f5d53 (link may not be stable)
Best regards,
Signature · 1 line
Sascha Hauer <[email protected]>
PATCH 2/2 arm64: rockchip: Enable generic fit image
In reply to Uwe Kleine-KönigThe generic device tree 2nd stage FIT image is a quite convenient image during development. Enable it in rockchip_v8_defconfig.
--- arch/arm/configs/rockchip_v8_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/rockchip_v8_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_MACH_RADXA_CM3=y CONFIG_64BIT=y CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_ARM_PSCI_CLIENT=y +CONFIG_BOARD_GENERIC_FIT=y CONFIG_MMU=y CONFIG_MALLOC_SIZE=0x0 CONFIG_MALLOC_TLSF=y
Signature · 1 line
2.47.1
Quoted 7 lines · Uwe Kleine-König
Hello,
while working to support the Qnap TS-433 NAS I found the config items enabled here quite useful. I'm not entirely sure that enabling generic fit image is useful in general (also because it comes with a build dependency on python3-libfdt), still here comes a suggestion to enable it.
I agree that this can be quite convenient, but indeed adding more python build dependencies is not so nice.
If Kconfig could check if scripts/make_fit.py --help can be successfully executed then might even by default build FIT images.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |