Skip to contentSkip to conversation

Add support for Infineon S28HL256T and S28HL02GT

PATCH RESEND In review [email protected] 2 participants 4 messages Apr 2, 2025 – Apr 30, 2025 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

cover Add support for Infineon S28HL256T and S28HL02GT

From: Takahiro Kuwano <[email protected]>

Those are 3.0V, 256Mb/2Gb NOR Flash devices with Octal interface. Same fanctionalities with 1.8V version that are already supported.

Takahiro Kuwano (2):
mtd: spi-nor-ids: Add support for S28HL256T
mtd: spi-nor-ids: Add support for S28HL02GT

 drivers/mtd/spi/spi-nor-ids.c | 2 ++
 1 file changed, 2 insertions(+)
Signature · 1 line
2.34.1
#1 lore raw

PATCH RESEND 1/2 mtd: spi-nor-ids: Add support for S28HL256T

From: Takahiro Kuwano <[email protected]>

Infineon S28HL256T is 3.0V, 256Mb Flash device with Octal interface. It has the same functionalities with S28HS256T.

---
 drivers/mtd/spi/spi-nor-ids.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mtd/spi/spi-nor-ids.c +1 -0
index 91ae49c9484..a500fff4775 100644
@@ -414,6 +414,7 @@ const struct flash_info spi_nor_ids[] = {
 	{ INFO6("s25fs256t",  0x342b19, 0x0f0890, 128 * 1024, 256,
 		SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 #ifdef CONFIG_SPI_FLASH_S28HX_T
+	{ INFO("s28hl256t",  0x345a19,      0, 256 * 1024, 128, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hl512t",  0x345a1a,      0, 256 * 1024, 256, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hl01gt",  0x345a1b,      0, 256 * 1024, 512, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hs256t",  0x345b19,      0, 256 * 1024, 128, SPI_NOR_OCTAL_DTR_READ) },
Signature · 1 line
2.34.1
#2 lore raw

PATCH RESEND 2/2 mtd: spi-nor-ids: Add support for S28HL02GT

In reply to [email protected]

From: Takahiro Kuwano <[email protected]>

Infineon S28HL02GT is 3.0V, 2Gb Flash device with Octal interface. It has the same functionalities with S28HS02GT.

---
 drivers/mtd/spi/spi-nor-ids.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mtd/spi/spi-nor-ids.c +1 -0
index a500fff4775..503dca28b89 100644
@@ -417,6 +417,7 @@ const struct flash_info spi_nor_ids[] = {
 	{ INFO("s28hl256t",  0x345a19,      0, 256 * 1024, 128, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hl512t",  0x345a1a,      0, 256 * 1024, 256, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hl01gt",  0x345a1b,      0, 256 * 1024, 512, SPI_NOR_OCTAL_DTR_READ) },
+	{ INFO("s28hl02gt",  0x345a1c,      0, 256 * 1024, 1024, SPI_NOR_OCTAL_DTR_READ | NO_CHIP_ERASE) },
 	{ INFO("s28hs256t",  0x345b19,      0, 256 * 1024, 128, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hs512t",  0x345b1a,      0, 256 * 1024, 256, SPI_NOR_OCTAL_DTR_READ) },
 	{ INFO("s28hs01gt",  0x345b1b,      0, 256 * 1024, 512, SPI_NOR_OCTAL_DTR_READ) },
Signature · 1 line
2.34.1
#3 lore raw
In reply to [email protected]
Quoted 10 lines · On Wed, 02 Apr 2025 15:26:39 +0900, [email protected] wrote:

From: Takahiro Kuwano <[email protected]>

Those are 3.0V, 256Mb/2Gb NOR Flash devices with Octal interface. Same fanctionalities with 1.8V version that are already supported.

Takahiro Kuwano (2):
mtd: spi-nor-ids: Add support for S28HL256T
mtd: spi-nor-ids: Add support for S28HL02GT

[...]

Applied to u-boot/master, thanks!

[1/2] mtd: spi-nor-ids: Add support for S28HL256T

      commit: 2aee40a49bf65505f5802376614bdf60b233a221
[2/2] mtd: spi-nor-ids: Add support for S28HL02GT
      commit: 10285e550a7e1576a8796da04fbe402920015dfe
Signature · 1 line
Tom