Add Sophgo EVB V1/V2 Board support

Add DT binding documentation for the Sophgo SG2042_EVB_V1.X board [1].

Link https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]

Signed-off-by Han Gao <[email protected]>

---
 Documentation/devicetree/bindings/riscv/sophgo.yaml | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/riscv/sophgo.yaml +1 -0

index a14cb10ff3f0..6c82f89b56ca 100644
@@ -34,6 +34,7 @@ properties:
       - items:
           - enum:
               - milkv,pioneer
+              - sophgo,sg2042-evb-v1
           - const: sophgo,sg2042
 
 additionalProperties: true

Signature · 1 line

2.47.2

Quoted 1 line · Han Gao

Add DT binding documentation for the Sophgo SG2042_EVB_V1.X board [1].

1.x? Is the v1.0 something people can get their hands on, or just the v1.1?
What differences do the boards have that are minimal enough that specific compatibles would not be required?

Quoted 23 lines

Link https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]

Signed-off-by Han Gao <[email protected]>

---
 Documentation/devicetree/bindings/riscv/sophgo.yaml | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/riscv/sophgo.yaml +1 -1

index a14cb10ff3f0..6c82f89b56ca 100644
@@ -34,6 +34,7 @@ properties:
       - items:
           - enum:
               - milkv,pioneer
+              - sophgo,sg2042-evb-v1
           - const: sophgo,sg2042
 
 additionalProperties: true
--

2.47.2

Quoted 9 lines · Conor Dooley

Quoted 1 line · Han Gao

Add DT binding documentation for the Sophgo SG2042_EVB_V1.X board [1].

1.x? Is the v1.0 something people can get their hands on, or just the v1.1?
What differences do the boards have that are minimal enough that specific compatibles would not be required?

First of all, v1.1 and v1.0 are compatible boards. There is no difference between v1.1 and v1.0 from dts.

Both v1.1 and v1.0 have been discontinued.
About 80 pieces of v1.1 are in the hands of community developers.

+&gmac0 {

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts new file +4 -0

+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+

Hi, Han,

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts

Quoted 27 lines · Han Gao

Sophgo SG2042_EVB_V1.X [1] is a prototype development board based on SG2042

Currently supports serial port, sdcard/emmc, pwm, fan speed control.

Link https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]

Signed-off-by Han Gao <[email protected]>

---
  arch/riscv/boot/dts/sophgo/Makefile          |   1 +
  arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts | 247 +++++++++++++++++++
  2 files changed, 248 insertions(+)

create mode 100644 arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts

arch/riscv/boot/dts/sophgo/Makefile +1 -0

index 47d4243a8f35..2470e30ae901 100644
@@ -3,3 +3,4 @@ dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
  dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
  dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb
  dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-evb-v1.dtb

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts new file +0 -0

new file mode 100644
index 000000000000..4f39a2575b8e

Please run "make CHECK_DTBS=y W=1 your_dtb_file" before submitting patch. I have a quick check and get following warnings/errors:

Error: ....../arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts:67.1-7 Label or path gmac0 not found
Error: ....../arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts:86.14-15 syntax error
FATAL ERROR: Unable to parse input tree

And the similar issues existing for sg2042-evb-v2.dts.

[......]

Quoted 5 lines

+&gmac0 {

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts new file +4 -0

+     phy-handle = <&phy0>;
+     phy-mode = "rgmii-id";
+     status = "okay";
+

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts line 81

Quoted 10 lines

arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts new file +10 -0

+     mdio {
+             phy0: phy@0 {
+                     compatible = "ethernet-phy-ieee802.3-c22";
+                     reg = <0>;
+                     reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>;
+                     reset-assert-us = <100000>;
+                     reset-deassert-us = <100000>;
+             };
+     };
+};

This should be dropped, we can add this after ethernet support is upstreamed.

The same for evb_v2.

[......]

Thanks.

Chen

Add DT binding documentation for the Sophgo SG2042_EVB_V2.0 board [1].

Link https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x4-EVB [1]

Signed-off-by Han Gao <[email protected]>

---
 Documentation/devicetree/bindings/riscv/sophgo.yaml | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/riscv/sophgo.yaml +0 -0

index 6c82f89b56ca..cbfd07cc053d 100644