SMMU handling for PCIe Passthrough on ARM
v11 cover SMMU handling for PCIe Passthrough on ARM
This series introduces SMMU handling for PCIe passthrough on ARM. These patches should be able to be upstreamed independently from the vPCI series [1]. See [2] for notes about test cases.
[1] https://lists.xenproject.org/archives/html/xen-devel/2023-10/msg00660.html
[2] https://lists.xenproject.org/archives/html/xen-devel/2023-06/msg01135.html
v10->v11:
* see individual patches
v9->v10:
* drop iommu/arm: Add iommu_dt_xlate()
* see individual patches
v8->v9:
* see individual patches
v7->v8:
* no changes
v6->v7:
* drop ("xen/arm: don't pass iommu properties to hwdom for iommu-map")
v5->v6:
* don't revert ("xen/arm: Add cmdline boot option "pci-passthrough = <boolean>"")
* add ("xen/arm: enable dom0 to use PCI devices with pci-passthrough=no")
v4->v5:
* drop ("xen/arm: Improve readability of check for registered devices")
* drop ("xen/arm: Move is_protected flag to struct device")
* add ("xen/arm: don't pass iommu properties to hwdom for iommu-map")
* add ("xen/arm: Fix mapping for PCI bridge mmio region")
* revert ("xen/arm: Add cmdline boot option "pci-passthrough = <boolean>"")
* add ("xen/arm: Map ITS doorbell register to IOMMU page tables.")
* fix test case #1 with PCI device in dom0
v3->v4:
* split a change from ("xen/arm: Move is_protected flag to struct device") into a new separate patch
* see individual patches for further details
v2->v3:
* drop "pci/arm: Use iommu_add_dt_pci_device()"
* drop "RFC: pci/arm: don't do iommu call for phantom functions"
* move invocation of sideband ID mapping function to add_device() platform_ops/iommu_ops hook
Oleksandr Andrushchenko (1):
xen/arm: smmuv2: Add PCI devices support for SMMUv2
Oleksandr Tyshchenko (1):
iommu/arm: Introduce iommu_add_dt_pci_sideband_ids API
Rahul Singh (3):
xen/arm: smmuv3: Add PCI devices support for SMMUv3 xen/arm: Fix mapping for PCI bridge mmio region xen/arm: Map ITS doorbell register to IOMMU page tables
Stewart Hildebrand (2):
iommu/arm: iommu_add_dt_pci_sideband_ids phantom handling xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
xen/arch/arm/device.c | 2 +- xen/arch/arm/include/asm/iommu.h | 15 ++ xen/arch/arm/include/asm/pci.h | 2 + xen/arch/arm/pci/pci.c | 14 +- xen/arch/arm/vgic-v3-its.c | 24 ++- xen/arch/x86/include/asm/pci.h | 6 + xen/common/device-tree/device-tree.c | 91 ++++++++++ xen/drivers/passthrough/arm/iommu.c | 13 ++ xen/drivers/passthrough/arm/smmu-v3.c | 119 +++++++++++-- xen/drivers/passthrough/arm/smmu.c | 246 +++++++++++++++----------- xen/drivers/passthrough/device_tree.c | 49 +++++ xen/drivers/pci/physdev.c | 4 +- xen/include/xen/device_tree.h | 23 +++ xen/include/xen/iommu.h | 21 ++- xen/include/xen/pci.h | 5 + 15 files changed, 517 insertions(+), 117 deletions(-)
Signature · 1 line
2.34.1
PATCH v11 1/7 iommu/arm: Introduce iommu_add_dt_pci_sideband_ids API
From: Oleksandr Tyshchenko <[email protected]>
The main purpose of this patch is to add a way to register PCI device (which is behind the IOMMU) using the generic PCI-IOMMU DT bindings [1] before assigning that device to a domain.
This behaves similarly to the existing iommu_add_dt_device API, except it handles PCI devices, and it is to be invoked from the add_device hook in the SMMU driver.
The function dt_map_id to translate an ID through a downstream mapping (which is also suitable for mapping Requester ID) was borrowed from Linux (v5.10-rc6) and updated according to the Xen code base.
[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/pci/pci-iommu.txt
---
Regarding pci_for_each_dma_alias question: getting host bridge node directly seems like a simpler solution with the same result. AFAIU with pci_for_each_dma_alias in linux we would arrive to the host brige node anyway, but also try to call dt_map_id for each device along the way. I am not sure why exactly it is done this way in linux, as according to the pci-iommu.txt, iommu-map node can only be present in the PCI root.
v10-v11:
* add Stefano's RB
v9->v10:
* move iommu_add_pci_sidebands_ids to arm/iommu.c
* replace be32_to_cpup with be32_to_cpu
v8->v9:
* replace DT_NO_IOMMU with 1
* guard iommu_add_pci_sideband_ids with CONFIG_ARM
v7->v8:
* ENOSYS->EOPNOTSUPP
* move iommu_add_pci_sideband_ids to iommu.c to fix x86 build
* simplify iommu_add_pci_sideband_ids
* add docstrings to iommu_add_{dt_}pci_sideband_ids
v6->v7:
* put iommu_add_pci_sideband_ids under ifdef
* remove ifdef CONFIG_APCI
* style: add newline for symmetry
v5->v6:
* pass ops to iommu_dt_xlate()
v4->v5:
* style: add newlines after variable declarations and before return in iommu.h
* drop device_is_protected() check in iommu_add_dt_pci_sideband_ids()
* rebase on top of ("dynamic node programming using overlay dtbo") series
* fix typo in commit message
* remove #ifdef around dt_map_id() prototype
* move dt_map_id() to xen/common/device_tree.c
* add function name in error prints
* use dprintk for debug prints
* use GENMASK and #include <xen/bitops.h>
* fix typo in comment
* remove unnecessary (int) cast in loop condition
* assign *id_out and return success in case of no translation in dt_map_id()
* don't initialize local variable unnecessarily
* return error in case of ACPI/no DT in iommu_add_{dt_}pci_sideband_ids()
v3->v4:
* wrap #include <asm/acpi.h> and if ( acpi_disabled ) in #ifdef CONFIG_ACPI
* fix Michal's remarks about style, parenthesis, and print formats
* remove !ops->dt_xlate check since it is already in iommu_dt_xlate helper
* rename s/iommu_dt_pci_map_id/dt_map_id/ because it is generic, not specific to iommu
* update commit description
v2->v3:
* new patch title (was: iommu/arm: Introduce iommu_add_dt_pci_device API)
* renamed function
from: iommu_add_dt_pci_device
to: iommu_add_dt_pci_sideband_ids
* removed stale ops->add_device check
* iommu.h: add empty stub iommu_add_dt_pci_sideband_ids for !HAS_DEVICE_TREE
* iommu.h: add iommu_add_pci_sideband_ids helper
* iommu.h: don't wrap prototype in #ifdef CONFIG_HAS_PCI
* s/iommu_fwspec_free(pci_to_dev(pdev))/iommu_fwspec_free(dev)/
v1->v2:
* remove extra devfn parameter since pdev fully describes the device
* remove ops->add_device() call from iommu_add_dt_pci_device(). Instead, rely on the existing iommu call in iommu_add_device().
* move the ops->add_device and ops->dt_xlate checks earlier
downstream->v1:
* rebase
* add const qualifier to struct dt_device_node *np arg in dt_map_id()
* add const qualifier to struct dt_device_node *np declaration in iommu_add_pci_device()
* use stdint.h types instead of u8/u32/etc...
* rename functions:
s/dt_iommu_xlate/iommu_dt_xlate/
s/dt_map_id/iommu_dt_pci_map_id/ s/iommu_add_pci_device/iommu_add_dt_pci_device/
* add device_is_protected check in iommu_add_dt_pci_device
* wrap prototypes in CONFIG_HAS_PCI
(cherry picked from commit 734e3bf6ee77e7947667ab8fa96c25b349c2e1da from
the downstream branch poc/pci-passthrough from
https://gitlab.com/xen-project/people/bmarquis/xen-arm-poc.git)
--- xen/arch/arm/include/asm/iommu.h | 15 +++++ xen/common/device-tree/device-tree.c | 91 +++++++++++++++++++++++++++ xen/drivers/passthrough/arm/iommu.c | 13 ++++ xen/drivers/passthrough/device_tree.c | 42 +++++++++++++ xen/include/xen/device_tree.h | 23 +++++++ xen/include/xen/iommu.h | 21 ++++++- 6 files changed, 204 insertions(+), 1 deletion(-)
xen/arch/arm/include/asm/iommu.h +15 -0
@@ -34,6 +34,21 @@ int __must_check arm_iommu_unmap_page(struct domain *d, dfn_t dfn,unsigned int order, unsigned int *flush_flags); +/* +* This function is not strictly ARM-specific, but it is only used by ARM +* as of now. So put it here to avoid creating dead code on other +* architectures. When usage is extended to other architectures, it should +* be moved to the generic header. +* +* +* Fills out the device's IOMMU fwspec with IOMMU ids. +* +* Return values: +* 0 : iommu_fwspec is filled out successfully. +* <0 : error while filling out the iommu_fwspec. +* >0 : IOMMU is not enabled/present or device is not connected to it. +*/ +int iommu_add_pci_sideband_ids (struct pci_dev *pdev);#endif /* __ARCH_ARM_IOMMU_H__ */ /*
xen/common/device-tree/device-tree.c +91 -0
103 lines not on this page · raw message
xen/drivers/passthrough/arm/iommu.c +13 -0
@@ -15,6 +15,7 @@* GNU General Public License for more details. */ +#include <xen/acpi.h> #include <xen/device_tree.h> #include <xen/iommu.h> #include <xen/lib.h>
@@ -151,3 +152,15 @@ bool arch_iommu_use_permitted(const struct domain *d) {return true; } + +int iommu_add_pci_sideband_ids (struct pci_dev *pdev) +{ +int ret = -EOPNOTSUPP ; + +#ifdef CONFIG_HAS_PCI +if ( acpi_disabled ) + ret =iommu_add_dt_pci_sideband_ids (pdev); +#endif + +return ret; +}
xen/drivers/passthrough/device_tree.c +42 -0
48 lines not on this page · raw message
xen/include/xen/device_tree.h +23 -0
@@ -947,6 +947,29 @@ int dt_count_phandle_with_args(const struct dt_device_node *np,*/ int dt_get_pci_domain_nr (struct dt_device_node *node); +/** +* dt_map_id - Translate an ID through a downstream mapping. +* @np: root complex device node. +* @id: device ID to map. +* @map_name: property name of the map to use. +* @map_mask_name: optional property name of the mask to use. +* @target: optional pointer to a target device node. +* @id_out: optional pointer to receive the translated ID. +* +* Given a device ID, look up the appropriate implementation-defined +* platform ID and/or the target device which receives transactions on that +* ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or +* @id_out may be NULL if only the other is required. If @target points to +* a non-NULL device node pointer, only entries targeting that node will be +* matched; if it points to a NULL value, it will receive the device node of +* the first matching target phandle, with a reference held. +* +* Return: 0 on success or a standard error code on failure. +*/ +int dt_map_id (const struct dt_device_node *np,uint32_t id, +const char *map_name,const char *map_mask_name, +struct dt_device_node **target,uint32_t *id_out); +struct dt_device_node *dt_find_node_by_phandle (dt_phandle handle);#ifdef CONFIG_DEVICE_TREE_DEBUG
xen/include/xen/iommu.h +20 -1
@@ -241,7 +241,8 @@ int iommu_dt_domain_init(struct domain *d);int iommu_release_dt_devices (struct domain *d);/* -* Helper to add master device to the IOMMU using generic IOMMU DT bindings. +* Helpers to add master device to the IOMMU using generic (PCI-)IOMMU +* DT bindings. * * Return values: * 0 : device is protected by an IOMMU
@@ -251,6 +252,19 @@ int iommu_release_dt_devices(struct domain *d);*/ int iommu_add_dt_device (struct dt_device_node *np); +/* +* Fills out the device's IOMMU fwspec with IOMMU ids from the DT. +* Ids are specified in the iommu-map property in the host bridge node. +* More information on the iommu-map property format can be found in +* Documentation/devicetree/bindings/pci/pci-iommu.txt from Linux. +* +* Return values: +* 0 : iommu_fwspec is filled out successfully. +* <0 : error while filling out the iommu_fwspec. +* >0 : IOMMU is not enabled/present or device is not connected to it. +*/ +int iommu_add_dt_pci_sideband_ids (struct pci_dev *pdev); +int iommu_do_dt_domctl (struct xen_domctl *domctl,struct domain *d,XEN_GUEST_HANDLE_PARAM (xen_domctl_t) u_domctl);
@@ -286,6 +300,11 @@ static inline int iommu_release_dt_devices(struct domain *d)return 0 ; } +static inline int iommu_add_dt_pci_sideband_ids (struct pci_dev *pdev) +{ +return -EOPNOTSUPP ; +} +#endif /* HAS_PASSTHROUGH */ #endif /* HAS_DEVICE_TREE */
Signature · 1 line
2.34.1
Re: [PATCH v11 1/7] iommu/arm: Introduce iommu_add_dt_pci_sideband_ids API
Quoted 14 lines · Mykyta Poturai
From: Oleksandr Tyshchenko <[email protected]>
The main purpose of this patch is to add a way to register PCI device (which is behind the IOMMU) using the generic PCI-IOMMU DT bindings [1] before assigning that device to a domain.
This behaves similarly to the existing
iommu_add_dt_deviceAPI, except it handles PCI devices, and it is to be invoked from theadd_devicehook in the SMMU driver.The function
dt_map_idto translate an ID through a downstream mapping (which is also suitable for mapping Requester ID) was borrowed from Linux (v5.10-rc6) and updated according to the Xen code base.
Quoted 6 lines
[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/pci/pci-iommu.txt
Signed-off-by Oleksandr Tyshchenko <[email protected]>Signed-off-by Stewart Hildebrand <[email protected]>Signed-off-by Mykyta Poturai <[email protected]>Reviewed-by Stefano Stabellini <[email protected]>
While I'm not happy about all this DT stuff in ...
Quoted 7 lines
--- xen/arch/arm/include/asm/iommu.h | 15 +++++ xen/common/device-tree/device-tree.c | 91 +++++++++++++++++++++++++++ xen/drivers/passthrough/arm/iommu.c | 13 ++++ xen/drivers/passthrough/device_tree.c | 42 +++++++++++++ xen/include/xen/device_tree.h | 23 +++++++ xen/include/xen/iommu.h | 21 ++++++-
... this file, it's only adding to what's there already, so
Jan
PATCH v11 2/7 iommu/arm: iommu_add_dt_pci_sideband_ids phantom handling
In reply to Mykyta PoturaiFrom: Stewart Hildebrand <[email protected]>
Handle phantom functions in iommu_add_dt_pci_sideband_ids(). Each phantom function will have a unique requestor ID (RID)/BDF. On ARM, we need to map/translate the RID/BDF to an AXI stream ID for each phantom function according to the pci-iommu device tree mapping [1]. The RID/BDF -> AXI stream ID mapping in DT could allow phantom devices (i.e. devices with phantom functions) to use different AXI stream IDs based on the (phantom) function.
[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/pci/pci-iommu.txt
---v10->v11:
* no changes
v9->v10:
* Add Stefano's RB
v8->v9:
* replace DT_NO_IOMMU with 1
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* no change
v4->v5:
* no change
v3->v4:
* s/iommu_dt_pci_map_id/dt_map_id/
v2->v3:
* new patch title (was: iommu/arm: iommu_add_dt_pci_device phantom handling)
* rework loop to reduce duplication
* s/iommu_fwspec_free(pci_to_dev(pdev))/iommu_fwspec_free(dev)/
v1->v2:
* new patch
---
TODO: investigate Jan's comment [2]
[2] https://lore.kernel.org/xen-devel/[email protected]/
--- xen/drivers/passthrough/device_tree.c | 33 ++++++++++++++++----------- 1 file changed, 20 insertions(+), 13 deletions(-)
xen/drivers/passthrough/device_tree.c +20 -13
@@ -169,6 +169,7 @@ int iommu_add_dt_pci_sideband_ids(struct pci_dev *pdev)struct device *dev =pci_to_dev (pdev);const struct dt_device_node *np;int rc; +unsigned int devfn = pdev->devfn;if ( !iommu_enabled )return 1 ;
@@ -183,21 +184,27 @@ int iommu_add_dt_pci_sideband_ids(struct pci_dev *pdev)if ( !np )return -ENODEV ; -/* -* According to the Documentation/devicetree/bindings/pci/pci-iommu.txt -* from Linux. -*/ - rc =dt_map_id (np,PCI_BDF (pdev->bus, pdev->devfn),"iommu-map" , -"iommu-map-mask" , &iommu_spec.np, iommu_spec.args); -if ( rc ) -return (rc == -ENODEV ) ?1 : rc; +do { +/* +* According to the Documentation/devicetree/bindings/pci/pci-iommu.txt +* from Linux. +*/ + rc =dt_map_id (np,PCI_BDF (pdev->bus, devfn),"iommu-map" , +"iommu-map-mask" , &iommu_spec.np, iommu_spec.args); +if ( rc ) +return (rc == -ENODEV ) ?1 : rc; - rc =iommu_dt_xlate (dev, &iommu_spec, ops); -if ( rc <0 ) - { -iommu_fwspec_free (dev); -return -EINVAL ; + rc =iommu_dt_xlate (dev, &iommu_spec, ops); +if ( rc <0 ) + { +iommu_fwspec_free (dev); +return -EINVAL ; + } + + devfn += pdev->phantom_stride; } +while ( (devfn != pdev->devfn) && + (PCI_SLOT (devfn) ==PCI_SLOT (pdev->devfn)) );return rc; }
Signature · 1 line
2.34.1
PATCH v11 3/7 xen/arm: smmuv2: Add PCI devices support for SMMUv2
In reply to Mykyta PoturaiFrom: Oleksandr Andrushchenko <[email protected]>
Implement support for PCI devices in the SMMU driver. Make arm_smmu_master structure to hold a pointer to the device to allow it to hold PCI devices. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
TODO:
Implement scratch page quarantining support.
---
v10-v11:
* remove unused code
* remove unnecessary blocks
v9->v10:
* remove unused code
* return on error in arm_smmu_dt_add_device_generic
v8->v9:
* no change
v7->v8:
* no change
v6->v7:
* use d->pci_lock in arm_smmu_assign_dev()
* remove !is_hardware_domain and pdev->domain == d checks in assign to support future dom0less use case when dom0 is using vPCI
* remove stale todo in dev_get_dev_node
* don't print ""
* remove redundant dt_device_is_protected check
* remove assign/deassing prints
* change assign logic to remove reassign reimplementation
* check if pdev->domain exists before assigning to it
* explain pdev->devfn check
* make reassign check stricter and update comment
v5->v6:
* check for hardware_domain == NULL (dom0less test case)
* locking: assign pdev->domain before list_add()
v4->v5:
* assign device to pdev->domain (usually dom0) by default in add_device() hook
* deassign from hwdom
* rebase on top of ("dynamic node programming using overlay dtbo") series
* remove TODO in comment about device prints
* add TODO regarding locking
* fixup after dropping ("xen/arm: Move is_protected flag to struct device")
v3->v4:
* add new device_is_protected check in add_device hook to match SMMUv3 and IPMMU-VMSA drivers
v2->v3:
* invoke iommu_add_pci_sideband_ids() from add_device hook
v1->v2:
* ignore add_device/assign_device/reassign_device calls for phantom functions (i.e. devfn != pdev->devfn)
downstream->v1:
* wrap unused function in #ifdef 0
* remove the remove_device() stub since it was submitted separately to the list [XEN][PATCH v6 12/19] xen/smmu: Add remove_device callback for smmu_iommu ops
https://lists.xenproject.org/archives/html/xen-devel/2023-05/msg00204.html
* arm_smmu_(de)assign_dev: return error instead of crashing system
* update condition in arm_smmu_reassign_dev
* style fixup
* add && !is_hardware_domain(d) into condition in arm_smmu_assign_dev()
(cherry picked from commit 0c11a7f65f044c26d87d1e27ac6283ef1f9cfb7a from
the downstream branch spider-master from
https://github.com/xen-troops/xen.git)
--- xen/drivers/passthrough/arm/smmu.c | 246 +++++++++++++++++------------ 1 file changed, 146 insertions(+), 100 deletions(-)
xen/drivers/passthrough/arm/smmu.c +146 -100
@@ -120,11 +120,21 @@ enum irqreturn {typedef enum irqreturn irqreturn_t ; -/* Device logger functions -* TODO: Handle PCI -*/ -#define dev_print (dev, lvl, fmt, ...) \ - printk(lvl "smmu: %s: " fmt, dt_node_full_name(dev_to_dt(dev)), ## __VA_ARGS__) +/* Device logger functions */ +#ifndef CONFIG_HAS_PCI +#define dev_print (dev, lvl, fmt, ...) \ + printk(lvl "smmu: %s: " fmt, dev_name(dev), ## __VA_ARGS__) +#else +#define dev_print (dev, lvl, fmt, ...) ({ \ + if ( !dev_is_pci((dev)) ) \ + printk(lvl "smmu: %s: " fmt, dev_name((dev)), ## __VA_ARGS__); \ + else \ + { \ + struct pci_dev *pdev = dev_to_pci((dev)); \ + printk(lvl "smmu: %pp: " fmt, &pdev->sbdf, ## __VA_ARGS__); \ + } \ +}) +#endif #define dev_dbg (dev, fmt, ...) dev_print(dev, XENLOG_DEBUG, fmt, ## __VA_ARGS__)#define dev_notice (dev, fmt, ...) dev_print(dev, XENLOG_INFO, fmt, ## __VA_ARGS__)
@@ -172,20 +182,6 @@ static void __iomem *devm_ioremap_resource(struct device *dev,#define IOMMU_FAULT_READ 0#define IOMMU_FAULT_WRITE 1 -/* -* Xen: PCI functions -* TODO: It should be implemented when PCI will be supported -*/ -#define to_pci_dev (dev) (NULL) -static inline int pci_for_each_dma_alias (struct pci_dev *pdev, -int (*fn) (struct pci_dev *pdev, -u16 alias,void *data), -void *data) -{ -BUG (); -return 0 ; -} -/* Xen: misc */ #define PHYS_MASK_SHIFT PADDR_BITS
@@ -619,7 +615,7 @@ struct arm_smmu_master_cfg {for (i =0 ; idx = (cfg)->smendx[i], (i) < (num); ++(i)) struct arm_smmu_master { -struct device_node *of_node; +struct device *dev;struct rb_node node;struct arm_smmu_master_cfg cfg; };
@@ -711,7 +707,7 @@ arm_smmu_get_fwspec(struct arm_smmu_master_cfg *cfg) {struct arm_smmu_master *master =container_of (cfg, struct arm_smmu_master, cfg); -return dev_iommu_fwspec_get (&master->of_node->dev); +return dev_iommu_fwspec_get (master->dev); }static void parse_driver_options (struct arm_smmu_device *smmu)
@@ -730,21 +726,11 @@ static void parse_driver_options(struct arm_smmu_device *smmu)static struct device_node *dev_get_dev_node (struct device *dev) { -#if 0 /* Xen: TODO: Add support for PCI */ -if (dev_is_pci (dev)) { -struct pci_bus *bus =to_pci_dev (dev)->bus; - -while (!pci_is_root_bus (bus)) - bus = bus->parent; -return bus->bridge->parent->of_node; - } -#endif -return dev->of_node; }static struct arm_smmu_master *find_smmu_master (struct arm_smmu_device *smmu, -struct device_node *dev_node) +struct device *dev) {struct rb_node *node = smmu->masters.rb_node;
@@ -753,9 +739,9 @@ static struct arm_smmu_master *find_smmu_master(struct arm_smmu_device *smmu, master = container_of(node, struct arm_smmu_master, node); -if (dev_node < master->of_node) +if (dev < master->dev) node = node->rb_left; -else if (dev_node > master->of_node) +else if (dev > master->dev) node = node->rb_right;else return master;
@@ -790,9 +776,9 @@ static int insert_smmu_master(struct arm_smmu_device *smmu, = container_of(*new, struct arm_smmu_master, node); parent = *new; -if (master->of_node < this->of_node) +if (master->dev < this->dev) new = &((*new)->rb_left); -else if (master->of_node > this->of_node) +else if (master->dev > this->dev) new = &((*new)->rb_right);else return -EEXIST ;
@@ -824,28 +810,30 @@ static int arm_smmu_dt_add_device_legacy(struct arm_smmu_device *smmu,struct arm_smmu_master *master;struct device_node *dev_node =dev_get_dev_node (dev); - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master) {dev_err (dev, -"rejecting multiple registrations for master device %s\n" , - dev_node->name); +"rejecting multiple registrations for master device\n" );return -EBUSY ; } master =devm_kzalloc (dev,sizeof (*master),GFP_KERNEL );if (!master)return -ENOMEM ; - master->of_node = dev_node; + master->dev = dev; -/* Xen: Let Xen know that the device is protected by an SMMU */ -dt_device_set_protected (dev_node); +if ( !dev_is_pci (dev) ) + { +/* Xen: Let Xen know that the device is protected by an SMMU */ +dt_device_set_protected (dev_node); + }for (i =0 ; i < fwspec->num_ids; ++i) {if (!(smmu->features &ARM_SMMU_FEAT_STREAM_MATCH ) && (fwspec->ids[i] >= smmu->num_mapping_groups)) {dev_err (dev, -"stream ID for master device %s greater than maximum allowed (%d)\n" , - dev_node->name, smmu->num_mapping_groups); +"SMMU stream ID %d is greater than maximum allowed (%d)\n" , + fwspec->ids[i], smmu->num_mapping_groups);return -ERANGE ; } master->cfg.smendx[i] =INVALID_SMENDX ;
@@ -860,7 +848,7 @@ static int arm_smmu_dt_remove_device_legacy(struct arm_smmu_device *smmu,struct device_node *dev_node =dev_get_dev_node (dev);int ret; - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master ==NULL ) { dev_err(dev, "No registrations found for master device %s\n",
@@ -872,8 +860,9 @@ static int arm_smmu_dt_remove_device_legacy(struct arm_smmu_device *smmu,if (ret)return ret; -/* Protected by dt_host_lock and dtdevs_lock as caller holds these locks. */ - dev_node->is_protected = false; +if ( !dev_is_pci (dev) ) +/* Protected by dt_host_lock and dtdevs_lock as caller holds these locks. */ + dev_node->is_protected = false;kfree (master);return 0 ;
@@ -902,6 +891,12 @@ static int register_smmu_master(struct arm_smmu_device *smmu, fwspec); } +/* Forward declaration */ +static int arm_smmu_assign_dev (struct domain *d,u8 devfn, +struct device *dev,u32 flag); +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev); +/* * The driver which supports generic IOMMU DT bindings must have this * callback implemented.
@@ -926,6 +921,25 @@ static int arm_smmu_dt_add_device_generic(u8 devfn, struct device *dev) {struct arm_smmu_device *smmu;struct iommu_fwspec *fwspec; +int ret; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); +int ret; + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + + ret =iommu_add_pci_sideband_ids (pdev); +if ( ret <0 ) { +iommu_fwspec_free (dev); +return ret; + } + } +#endif fwspec =dev_iommu_fwspec_get (dev);if (fwspec ==NULL )
@@ -935,7 +949,25 @@ static int arm_smmu_dt_add_device_generic(u8 devfn, struct device *dev)if (smmu ==NULL )return -ENXIO ; -return arm_smmu_dt_add_device_legacy (smmu, dev, fwspec); + ret =arm_smmu_dt_add_device_legacy (smmu, dev, fwspec); +if ( ret ) +return ret; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* +* During PHYSDEVOP_pci_device_add, Xen does not assign the +* device, so we must do it here. +*/ +if ( pdev->domain ) + ret =arm_smmu_assign_dev (pdev->domain, devfn, dev,0 ); + } +#endif + +return ret; } static int arm_smmu_dt_xlate_generic(struct device *dev,
@@ -958,11 +990,10 @@ static struct arm_smmu_device *find_smmu_for_device(struct device *dev) {struct arm_smmu_device *smmu;struct arm_smmu_master *master =NULL ; -struct device_node *dev_node =dev_get_dev_node (dev);spin_lock (&arm_smmu_devices_lock);list_for_each_entry (smmu, &arm_smmu_devices, list) { - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master)break ; }
@@ -2054,65 +2085,26 @@ static bool arm_smmu_capable(enum iommu_cap cap) }#endif -static int __arm_smmu_get_pci_sid (struct pci_dev *pdev,u16 alias,void *data) -{ - *((u16 *)data) = alias; -return 0 ;/* Continue walking */ -} - -static void __arm_smmu_release_pci_iommudata (void *data) -{ -kfree (data); -} -static int arm_smmu_add_device (struct device *dev) {struct arm_smmu_device *smmu; +struct arm_smmu_master *master;struct arm_smmu_master_cfg *cfg;struct iommu_group *group;void (*releasefn)(void *data) =NULL ; -int ret; smmu =find_smmu_for_device (dev);if (!smmu)return -ENODEV ; -if (dev_is_pci (dev)) { -struct pci_dev *pdev =to_pci_dev (dev); -struct iommu_fwspec *fwspec; - - cfg =kzalloc (sizeof (*cfg),GFP_KERNEL ); -if (!cfg) { -return -ENOMEM ; - } - - ret =iommu_fwspec_init (dev, smmu->dev); -if (ret) { -kfree (cfg); -return ret; - } - fwspec =dev_iommu_fwspec_get (dev); - -/* -* Assume Stream ID == Requester ID for now. -* We need a way to describe the ID mappings in FDT. -*/ -pci_for_each_dma_alias (pdev, __arm_smmu_get_pci_sid, - &fwspec->ids[0 ]); - releasefn = __arm_smmu_release_pci_iommudata; - cfg->smmu = smmu; - }else { -struct arm_smmu_master *master; - - master =find_smmu_master (smmu, dev->of_node); -if (!master) { -return -ENODEV ; - } - - cfg = &master->cfg; - cfg->smmu = smmu; + master =find_smmu_master (smmu, dev); +if (!master) { +return -ENODEV ; } + cfg = &master->cfg; + cfg->smmu = smmu; + group =iommu_group_alloc ();if (IS_ERR (group)) {dev_err (dev,"Failed to allocate IOMMU group\n" );
@@ -2772,6 +2764,42 @@ static int arm_smmu_assign_dev(struct domain *d, u8 devfn,return -ENOMEM ; } +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +ASSERT (pcidevs_locked ()); + +write_lock (&pdev->domain->pci_lock); +list_del (&pdev->domain_list); +write_unlock (&pdev->domain->pci_lock); + + pdev->domain = d; + +write_lock (&d->pci_lock); +list_add (&pdev->domain_list, &d->pdev_list); +write_unlock (&d->pci_lock); + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) + { +struct iommu_domain *domain =dev_iommu_domain (dev); +if ( !iommu_quarantine ) +return 0 ; + +if ( domain && domain->priv ) +arm_smmu_deassign_dev (domain->priv->cfg.domain, devfn, dev); + +return 0 ; + } + } +#endif +if (!dev_iommu_group (dev)) { ret =arm_smmu_add_device (dev);if (ret)
@@ -2821,11 +2849,27 @@ out:return ret; } -static int arm_smmu_deassign_dev (struct domain *d,struct device *dev) +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev) {struct iommu_domain *domain =dev_iommu_domain (dev);struct arm_smmu_xen_domain *xen_domain; +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) +return 0 ; + } +#endif + xen_domain =dom_iommu (d)->arch.priv;if (!domain || domain->priv->cfg.domain != d) {
@@ -2852,14 +2896,16 @@ static int arm_smmu_reassign_dev(struct domain *s, struct domain *t, {int ret =0 ; -/* Don't allow remapping on other domain than hwdom */ -if ( t && !is_hardware_domain (t) ) +/* Don't allow remapping on other domain than hwdom +* or dom_io for PCI devices +*/ +if ( t && !is_hardware_domain (t) && (t != dom_io || !dev_is_pci (dev)) )return -EPERM ;if (t == s)return 0 ; - ret =arm_smmu_deassign_dev (s, dev); + ret =arm_smmu_deassign_dev (s, devfn, dev);if (ret)return ret;
Signature · 1 line
2.34.1
Re: [PATCH v11 3/7] xen/arm: smmuv2: Add PCI devices support for SMMUv2
Quoted 11 lines · Mykyta Poturai
From: Oleksandr Andrushchenko <[email protected]>
Implement support for PCI devices in the SMMU driver. Make
arm_smmu_masterstructure to hold a pointer to the device to allow it to hold PCI devices. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
Quoted 7 lines
TODO:
Implement scratch page quarantining support.Signed-off-by Oleksandr Tyshchenko <[email protected]>Signed-off-by Oleksandr Andrushchenko <[email protected]>Signed-off-by Stewart Hildebrand <[email protected]>Signed-off-by Mykyta Poturai <[email protected]>
Quoted 492 lines
---
v10-v11:
* remove unused code
* remove unnecessary blocks
v9->v10:
* remove unused code
* return on error inarm_smmu_dt_add_device_generic
v8->v9:
* no change
v7->v8:
* no change
v6->v7:
* used->pci_lockinarm_smmu_assign_dev()
* remove !is_hardware_domain andpdev->domain== d checks in assign to support future dom0less use case when dom0 is using vPCI
* remove stale todo indev_get_dev_node
* don't print ""
* remove redundantdt_device_is_protectedcheck
* remove assign/deassing prints
* change assign logic to remove reassign reimplementation
* check ifpdev->domainexists before assigning to it
* explainpdev->devfncheck
* make reassign check stricter and update comment
v5->v6:
* check forhardware_domain== NULL (dom0less test case)
* locking: assignpdev->domainbeforelist_add()
v4->v5:
* assign device topdev->domain(usually dom0) by default inadd_device()hook
* deassign from hwdom
* rebase on top of ("dynamic node programming using overlay dtbo") series
* remove TODO in comment about device prints
* add TODO regarding locking
* fixup after dropping ("xen/arm: Moveis_protectedflag to struct device")
v3->v4:
* add newdevice_is_protectedcheck inadd_devicehook to match SMMUv3 and IPMMU-VMSA drivers
v2->v3:
* invokeiommu_add_pci_sideband_ids()fromadd_devicehook
v1->v2:
* ignore add_device/assign_device/reassign_device calls for phantom functions (i.e. devfn !=pdev->devfn)
downstream->v1:
* wrap unused function in #ifdef 0
* remove theremove_device()stub since it was submitted separately to the list [XEN][PATCH v6 12/19] xen/smmu: Addremove_devicecallback forsmmu_iommuops
https://lists.xenproject.org/archives/html/xen-devel/2023-05/msg00204.html
* arm_smmu_(de)assign_dev: return error instead of crashing system
* update condition inarm_smmu_reassign_dev
* style fixup
* add && !is_hardware_domain(d) into condition inarm_smmu_assign_dev()(cherry picked from commit
0c11a7f65f044c26d87d1e27ac6283ef1f9cfb7afrom
the downstream branch spider-master from
https://github.com/xen-troops/xen.git)--- xen/drivers/passthrough/arm/smmu.c | 246 +++++++++++++++++------------ 1 file changed, 146 insertions(+), 100 deletions(-)xen/drivers/passthrough/arm/smmu.c +146
-100@@ -120,11 +120,21 @@ enum irqreturn {typedef enum irqreturn irqreturn_t ; -/* Device logger functions -* TODO: Handle PCI -*/ -#define dev_print (dev, lvl, fmt, ...) \ - printk(lvl "smmu: %s: " fmt, dt_node_full_name(dev_to_dt(dev)), ## __VA_ARGS__) +/* Device logger functions */ +#ifndef CONFIG_HAS_PCI +#define dev_print (dev, lvl, fmt, ...) \ + printk(lvl "smmu: %s: " fmt, dev_name(dev), ## __VA_ARGS__) +#else +#define dev_print (dev, lvl, fmt, ...) ({ \ + if ( !dev_is_pci((dev)) ) \ + printk(lvl "smmu: %s: " fmt, dev_name((dev)), ## __VA_ARGS__); \ + else \ + { \ + struct pci_dev *pdev = dev_to_pci((dev)); \ + printk(lvl "smmu: %pp: " fmt, &pdev->sbdf, ## __VA_ARGS__); \ + } \ +}) +#endif #define dev_dbg (dev, fmt, ...) dev_print(dev, XENLOG_DEBUG, fmt, ## __VA_ARGS__)#define dev_notice (dev, fmt, ...) dev_print(dev, XENLOG_INFO, fmt, ## __VA_ARGS__)@@ -172,20 +182,6 @@ static void __iomem *devm_ioremap_resource(struct device *dev,#define IOMMU_FAULT_READ 0#define IOMMU_FAULT_WRITE 1 -/* -* Xen: PCI functions -* TODO: It should be implemented when PCI will be supported -*/ -#define to_pci_dev (dev) (NULL) -static inline int pci_for_each_dma_alias (struct pci_dev *pdev, -int (*fn) (struct pci_dev *pdev, -u16 alias,void *data), -void *data) -{ -BUG (); -return 0 ; -} -/* Xen: misc */ #define PHYS_MASK_SHIFT PADDR_BITS@@ -619,7 +615,7 @@ struct arm_smmu_master_cfg {for (i =0 ; idx = (cfg)->smendx[i], (i) < (num); ++(i)) struct arm_smmu_master { -struct device_node *of_node; +struct device *dev;struct rb_node node;struct arm_smmu_master_cfg cfg; };@@ -711,7 +707,7 @@ arm_smmu_get_fwspec(struct arm_smmu_master_cfg *cfg) {struct arm_smmu_master *master =container_of (cfg, struct arm_smmu_master, cfg); -return dev_iommu_fwspec_get (&master->of_node->dev); +return dev_iommu_fwspec_get (master->dev); }static void parse_driver_options (struct arm_smmu_device *smmu)@@ -730,21 +726,11 @@ static void parse_driver_options(struct arm_smmu_device *smmu)static struct device_node *dev_get_dev_node (struct device *dev) { -#if 0 /* Xen: TODO: Add support for PCI */ -if (dev_is_pci (dev)) { -struct pci_bus *bus =to_pci_dev (dev)->bus; - -while (!pci_is_root_bus (bus)) - bus = bus->parent; -return bus->bridge->parent->of_node; - } -#endif -return dev->of_node; }static struct arm_smmu_master *find_smmu_master (struct arm_smmu_device *smmu, -struct device_node *dev_node) +struct device *dev) {struct rb_node *node = smmu->masters.rb_node;@@ -753,9 +739,9 @@ static struct arm_smmu_master *find_smmu_master(struct arm_smmu_device *smmu, master = container_of(node, struct arm_smmu_master, node); -if (dev_node < master->of_node) +if (dev < master->dev) node = node->rb_left; -else if (dev_node > master->of_node) +else if (dev > master->dev) node = node->rb_right;else return master;@@ -790,9 +776,9 @@ static int insert_smmu_master(struct arm_smmu_device *smmu, = container_of(*new, struct arm_smmu_master, node); parent = *new; -if (master->of_node < this->of_node) +if (master->dev < this->dev) new = &((*new)->rb_left); -else if (master->of_node > this->of_node) +else if (master->dev > this->dev) new = &((*new)->rb_right);else return -EEXIST ;@@ -824,28 +810,30 @@ static int arm_smmu_dt_add_device_legacy(struct arm_smmu_device *smmu,struct arm_smmu_master *master;struct device_node *dev_node =dev_get_dev_node (dev); - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master) {dev_err (dev, -"rejecting multiple registrations for master device %s\n" , - dev_node->name); +"rejecting multiple registrations for master device\n" );return -EBUSY ; } master =devm_kzalloc (dev,sizeof (*master),GFP_KERNEL );if (!master)return -ENOMEM ; - master->of_node = dev_node; + master->dev = dev; -/* Xen: Let Xen know that the device is protected by an SMMU */ -dt_device_set_protected (dev_node); +if ( !dev_is_pci (dev) ) + { +/* Xen: Let Xen know that the device is protected by an SMMU */ +dt_device_set_protected (dev_node); + }for (i =0 ; i < fwspec->num_ids; ++i) {if (!(smmu->features &ARM_SMMU_FEAT_STREAM_MATCH ) && (fwspec->ids[i] >= smmu->num_mapping_groups)) {dev_err (dev, -"stream ID for master device %s greater than maximum allowed (%d)\n" , - dev_node->name, smmu->num_mapping_groups); +"SMMU stream ID %d is greater than maximum allowed (%d)\n" , + fwspec->ids[i], smmu->num_mapping_groups);return -ERANGE ; } master->cfg.smendx[i] =INVALID_SMENDX ;@@ -860,7 +848,7 @@ static int arm_smmu_dt_remove_device_legacy(struct arm_smmu_device *smmu,struct device_node *dev_node =dev_get_dev_node (dev);int ret; - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master ==NULL ) { dev_err(dev, "No registrations found for master device %s\n",@@ -872,8 +860,9 @@ static int arm_smmu_dt_remove_device_legacy(struct arm_smmu_device *smmu,if (ret)return ret; -/* Protected by dt_host_lock and dtdevs_lock as caller holds these locks. */ - dev_node->is_protected = false; +if ( !dev_is_pci (dev) ) +/* Protected by dt_host_lock and dtdevs_lock as caller holds these locks. */ + dev_node->is_protected = false;kfree (master);return 0 ;@@ -902,6 +891,12 @@ static int register_smmu_master(struct arm_smmu_device *smmu, fwspec); } +/* Forward declaration */ +static int arm_smmu_assign_dev (struct domain *d,u8 devfn, +struct device *dev,u32 flag); +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev); +/* * The driver which supports generic IOMMU DT bindings must have this * callback implemented. @@ -926,6 +921,25 @@ static int arm_smmu_dt_add_device_generic(u8 devfn, struct device *dev) {struct arm_smmu_device *smmu;struct iommu_fwspec *fwspec; +int ret; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); +int ret; + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + + ret =iommu_add_pci_sideband_ids (pdev); +if ( ret <0 ) { +iommu_fwspec_free (dev); +return ret; + } + } +#endif fwspec =dev_iommu_fwspec_get (dev);if (fwspec ==NULL )@@ -935,7 +949,25 @@ static int arm_smmu_dt_add_device_generic(u8 devfn, struct device *dev)if (smmu ==NULL )return -ENXIO ; -return arm_smmu_dt_add_device_legacy (smmu, dev, fwspec); + ret =arm_smmu_dt_add_device_legacy (smmu, dev, fwspec); +if ( ret ) +return ret; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* +* During PHYSDEVOP_pci_device_add, Xen does not assign the +* device, so we must do it here. +*/ +if ( pdev->domain ) + ret =arm_smmu_assign_dev (pdev->domain, devfn, dev,0 ); + } +#endif + +return ret; } static int arm_smmu_dt_xlate_generic(struct device *dev,@@ -958,11 +990,10 @@ static struct arm_smmu_device *find_smmu_for_device(struct device *dev) {struct arm_smmu_device *smmu;struct arm_smmu_master *master =NULL ; -struct device_node *dev_node =dev_get_dev_node (dev);spin_lock (&arm_smmu_devices_lock);list_for_each_entry (smmu, &arm_smmu_devices, list) { - master =find_smmu_master (smmu, dev_node); + master =find_smmu_master (smmu, dev);if (master)break ; }@@ -2054,65 +2085,26 @@ static bool arm_smmu_capable(enum iommu_cap cap) }#endif -static int __arm_smmu_get_pci_sid (struct pci_dev *pdev,u16 alias,void *data) -{ - *((u16 *)data) = alias; -return 0 ;/* Continue walking */ -} - -static void __arm_smmu_release_pci_iommudata (void *data) -{ -kfree (data); -} -static int arm_smmu_add_device (struct device *dev) {struct arm_smmu_device *smmu; +struct arm_smmu_master *master;struct arm_smmu_master_cfg *cfg;struct iommu_group *group;void (*releasefn)(void *data) =NULL ; -int ret; smmu =find_smmu_for_device (dev);if (!smmu)return -ENODEV ; -if (dev_is_pci (dev)) { -struct pci_dev *pdev =to_pci_dev (dev); -struct iommu_fwspec *fwspec; - - cfg =kzalloc (sizeof (*cfg),GFP_KERNEL ); -if (!cfg) { -return -ENOMEM ; - } - - ret =iommu_fwspec_init (dev, smmu->dev); -if (ret) { -kfree (cfg); -return ret; - } - fwspec =dev_iommu_fwspec_get (dev); - -/* -* Assume Stream ID == Requester ID for now. -* We need a way to describe the ID mappings in FDT. -*/ -pci_for_each_dma_alias (pdev, __arm_smmu_get_pci_sid, - &fwspec->ids[0 ]); - releasefn = __arm_smmu_release_pci_iommudata; - cfg->smmu = smmu; - }else { -struct arm_smmu_master *master; - - master =find_smmu_master (smmu, dev->of_node); -if (!master) { -return -ENODEV ; - } - - cfg = &master->cfg; - cfg->smmu = smmu; + master =find_smmu_master (smmu, dev); +if (!master) { +return -ENODEV ; } + cfg = &master->cfg; + cfg->smmu = smmu; + group =iommu_group_alloc ();if (IS_ERR (group)) {dev_err (dev,"Failed to allocate IOMMU group\n" );@@ -2772,6 +2764,42 @@ static int arm_smmu_assign_dev(struct domain *d, u8 devfn,return -ENOMEM ; } +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +ASSERT (pcidevs_locked ()); + +write_lock (&pdev->domain->pci_lock); +list_del (&pdev->domain_list); +write_unlock (&pdev->domain->pci_lock); + + pdev->domain = d; + +write_lock (&d->pci_lock); +list_add (&pdev->domain_list, &d->pdev_list); +write_unlock (&d->pci_lock); + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) + { +struct iommu_domain *domain =dev_iommu_domain (dev); +if ( !iommu_quarantine ) +return 0 ; + +if ( domain && domain->priv ) +arm_smmu_deassign_dev (domain->priv->cfg.domain, devfn, dev); + +return 0 ; + } + } +#endif +if (!dev_iommu_group (dev)) { ret =arm_smmu_add_device (dev);if (ret)@@ -2821,11 +2849,27 @@ out:return ret; } -static int arm_smmu_deassign_dev (struct domain *d,struct device *dev) +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev) {struct iommu_domain *domain =dev_iommu_domain (dev);struct arm_smmu_xen_domain *xen_domain; +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) +return 0 ; + } +#endif + xen_domain =dom_iommu (d)->arch.priv;if (!domain || domain->priv->cfg.domain != d) {@@ -2852,14 +2896,16 @@ static int arm_smmu_reassign_dev(struct domain *s, struct domain *t, {int ret =0 ; -/* Don't allow remapping on other domain than hwdom */ -if ( t && !is_hardware_domain (t) ) +/* Don't allow remapping on other domain than hwdom +* or dom_io for PCI devices +*/ +if ( t && !is_hardware_domain (t) && (t != dom_io || !dev_is_pci (dev)) )return -EPERM ;if (t == s)return 0 ; - ret =arm_smmu_deassign_dev (s, dev); + ret =arm_smmu_deassign_dev (s, devfn, dev);if (ret)return ret;Signature · 1 line
2.34.1
PATCH v11 4/7 xen/arm: smmuv3: Add PCI devices support for SMMUv3
In reply to Mykyta PoturaiFrom: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
TODO:
Implement scratch page quarantining support.
---v10->v11:
* no changes
v9->v10:
* return if iommu_add_pci_sidband_ids fails
v8->v9:
* no change
v7->v8:
* no change
v6->v7:
* address TODO: use d->pci_lock in arm_smmu_assign_dev()
* remove !is_hardware_domain and pdev->domain == d checks in assign to support future dom0less use case when dom0 is using vPCI
* check if pdev->domain exists before assigning to it
* don't print ""
* change assign logic to remove reassign reimplementation
* explain pdev->devfn check
* make reassign check stricter and update comment
v5->v6:
* check for hardware_domain == NULL (dom0less test case)
* locking: assign pdev->domain before list_add()
v4->v5:
* deassign from hwdom
* add TODO regarding locking
* fixup after dropping ("xen/arm: Move is_protected flag to struct device")
v3->v4:
* no change
v2->v3:
* rebase
* invoke iommu_add_pci_sideband_ids() from add_device hook
v1->v2:
* ignore add_device/assign_device/reassign_device calls for phantom functions (i.e. devfn != pdev->devfn)
downstream->v1:
* rebase
* move 2 replacements of s/dt_device_set_protected(dev_to_dt(dev))/device_set_protected(dev)/ from this commit to ("xen/arm: Move is_protected flag to struct device")
so as to not break ability to bisect
* adjust patch title (remove stray space)
* arm_smmu_(de)assign_dev: return error instead of crashing system
* remove arm_smmu_remove_device() stub
* update condition in arm_smmu_reassign_dev
* style fixup
(cherry picked from commit 7ed6c3ab250d899fe6e893a514278e406a2893e8 from
the downstream branch poc/pci-passthrough from
https://gitlab.com/xen-project/people/bmarquis/xen-arm-poc.git)
--- xen/drivers/passthrough/arm/smmu-v3.c | 119 +++++++++++++++++++++++--- 1 file changed, 108 insertions(+), 11 deletions(-)
xen/drivers/passthrough/arm/smmu-v3.c +108 -11
@@ -1469,14 +1469,37 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid) }/* Forward declaration */ static struct arm_smmu_device *arm_smmu_get_by_dev (const struct device *dev); +static int arm_smmu_assign_dev (struct domain *d,u8 devfn,struct device *dev, +u32 flag); +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev);static int arm_smmu_add_device (u8 devfn,struct device *dev) {int i, ret;struct arm_smmu_device *smmu;struct arm_smmu_master *master; -struct iommu_fwspec *fwspec =dev_iommu_fwspec_get (dev); +struct iommu_fwspec *fwspec; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); +int ret; + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + + ret =iommu_add_pci_sideband_ids (pdev); +if ( ret <0 ) { +iommu_fwspec_free (dev); +return ret; + } + } +#endif + fwspec =dev_iommu_fwspec_get (dev);if (!fwspec)return -ENODEV ;
@@ -1521,17 +1544,38 @@ static int arm_smmu_add_device(u8 devfn, struct device *dev)*/ arm_smmu_enable_pasid (master); -if (dt_device_is_protected (dev_to_dt (dev))) { -dev_err (dev,"Already added to SMMUv3\n" ); -return -EEXIST ; - } +if ( !dev_is_pci (dev) ) + { +if (dt_device_is_protected (dev_to_dt (dev))) { +dev_err (dev,"Already added to SMMUv3\n" ); +return -EEXIST ; + } -/* Let Xen know that the master device is protected by an IOMMU. */ -dt_device_set_protected (dev_to_dt (dev)); +/* Let Xen know that the master device is protected by an IOMMU. */ +dt_device_set_protected (dev_to_dt (dev)); + }dev_info (dev,"Added master device (SMMUv3 %s StreamIds %u)\n" ,dev_name (fwspec->iommu_dev), fwspec->num_ids); +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* +* During PHYSDEVOP_pci_device_add, Xen does not assign the +* device, so we must do it here. +*/ +if ( pdev->domain ) + { + ret =arm_smmu_assign_dev (pdev->domain, devfn, dev,0 ); +if (ret) + goto err_free_master; + } + } +#endif +return 0 ; err_free_master:
@@ -2624,6 +2668,42 @@ static int arm_smmu_assign_dev(struct domain *d, u8 devfn,struct arm_smmu_domain *smmu_domain;struct arm_smmu_xen_domain *xen_domain =dom_iommu (d)->arch.priv; +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +ASSERT (pcidevs_locked ()); + +write_lock (&pdev->domain->pci_lock); +list_del (&pdev->domain_list); +write_unlock (&pdev->domain->pci_lock); + + pdev->domain = d; + +write_lock (&d->pci_lock); +list_add (&pdev->domain_list, &d->pdev_list); +write_unlock (&d->pci_lock); + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) + { +struct arm_smmu_master *master =dev_iommu_priv_get (dev); +if ( !iommu_quarantine ) +return 0 ; + +if ( master && master->domain ) +arm_smmu_deassign_dev (master->domain->d, devfn, dev); + +return 0 ; + } + } +#endif +spin_lock (&xen_domain->lock);/*
@@ -2657,7 +2737,7 @@ out:return ret; } -static int arm_smmu_deassign_dev (struct domain *d,struct device *dev) +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn,struct device *dev) {struct iommu_domain *io_domain =arm_smmu_get_domain (d, dev);struct arm_smmu_xen_domain *xen_domain =dom_iommu (d)->arch.priv;
@@ -2669,6 +2749,21 @@ static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)return -ESRCH ; } +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) +return 0 ; + } +#endif +spin_lock (&xen_domain->lock);arm_smmu_detach_dev (master);
@@ -2687,14 +2782,16 @@ static int arm_smmu_reassign_dev(struct domain *s, struct domain *t, {int ret =0 ; -/* Don't allow remapping on other domain than hwdom */ -if ( t && !is_hardware_domain (t) ) +/* Don't allow remapping on other domain than hwdom +* or dom_io for PCI devices +*/ +if ( t && !is_hardware_domain (t) && (t != dom_io || !dev_is_pci (dev)) )return -EPERM ;if (t == s)return 0 ; - ret =arm_smmu_deassign_dev (s, dev); + ret =arm_smmu_deassign_dev (s, devfn, dev);if (ret)return ret;
Signature · 1 line
2.34.1
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
Quoted 10 lines · Mykyta Poturai
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
Quoted 6 lines
TODO:
Implement scratch page quarantining support.Signed-off-by Rahul Singh <[email protected]>Signed-off-by Stewart Hildebrand <[email protected]>Signed-off-by Mykyta Poturai <[email protected]>
Quoted 246 lines
---
v10->v11:
* no changes
v9->v10:
* return ifiommu_add_pci_sidband_idsfails
v8->v9:
* no change
v7->v8:
* no change
v6->v7:
* address TODO: used->pci_lockinarm_smmu_assign_dev()
* remove !is_hardware_domain andpdev->domain== d checks in assign to support future dom0less use case when dom0 is using vPCI
* check ifpdev->domainexists before assigning to it
* don't print ""
* change assign logic to remove reassign reimplementation
* explainpdev->devfncheck
* make reassign check stricter and update comment
v5->v6:
* check forhardware_domain== NULL (dom0less test case)
* locking: assignpdev->domainbeforelist_add()
v4->v5:
* deassign from hwdom
* add TODO regarding locking
* fixup after dropping ("xen/arm: Moveis_protectedflag to struct device")
v3->v4:
* no change
v2->v3:
* rebase
* invokeiommu_add_pci_sideband_ids()fromadd_devicehook
v1->v2:
* ignore add_device/assign_device/reassign_device calls for phantom functions (i.e. devfn !=pdev->devfn)
downstream->v1:
* rebase
* move 2 replacements of s/dt_device_set_protected(dev_to_dt(dev))/device_set_protected(dev)/ from this commit to ("xen/arm: Moveis_protectedflag to struct device")
so as to not break ability to bisect
* adjust patch title (remove stray space)
* arm_smmu_(de)assign_dev: return error instead of crashing system
* removearm_smmu_remove_device()stub
* update condition inarm_smmu_reassign_dev
* style fixup(cherry picked from commit
7ed6c3ab250d899fe6e893a514278e406a2893e8from
the downstream branch poc/pci-passthrough from
https://gitlab.com/xen-project/people/bmarquis/xen-arm-poc.git)--- xen/drivers/passthrough/arm/smmu-v3.c | 119 +++++++++++++++++++++++--- 1 file changed, 108 insertions(+), 11 deletions(-)xen/drivers/passthrough/arm/smmu-v3.c +108
-11@@ -1469,14 +1469,37 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid) }/* Forward declaration */ static struct arm_smmu_device *arm_smmu_get_by_dev (const struct device *dev); +static int arm_smmu_assign_dev (struct domain *d,u8 devfn,struct device *dev, +u32 flag); +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn, +struct device *dev);static int arm_smmu_add_device (u8 devfn,struct device *dev) {int i, ret;struct arm_smmu_device *smmu;struct arm_smmu_master *master; -struct iommu_fwspec *fwspec =dev_iommu_fwspec_get (dev); +struct iommu_fwspec *fwspec; + +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); +int ret; + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + + ret =iommu_add_pci_sideband_ids (pdev); +if ( ret <0 ) { +iommu_fwspec_free (dev); +return ret; + } + } +#endif + fwspec =dev_iommu_fwspec_get (dev);if (!fwspec)return -ENODEV ;@@ -1521,17 +1544,38 @@ static int arm_smmu_add_device(u8 devfn, struct device *dev)*/ arm_smmu_enable_pasid (master); -if (dt_device_is_protected (dev_to_dt (dev))) { -dev_err (dev,"Already added to SMMUv3\n" ); -return -EEXIST ; - } +if ( !dev_is_pci (dev) ) + { +if (dt_device_is_protected (dev_to_dt (dev))) { +dev_err (dev,"Already added to SMMUv3\n" ); +return -EEXIST ; + } -/* Let Xen know that the master device is protected by an IOMMU. */ -dt_device_set_protected (dev_to_dt (dev)); +/* Let Xen know that the master device is protected by an IOMMU. */ +dt_device_set_protected (dev_to_dt (dev)); + }dev_info (dev,"Added master device (SMMUv3 %s StreamIds %u)\n" ,dev_name (fwspec->iommu_dev), fwspec->num_ids); +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* +* During PHYSDEVOP_pci_device_add, Xen does not assign the +* device, so we must do it here. +*/ +if ( pdev->domain ) + { + ret =arm_smmu_assign_dev (pdev->domain, devfn, dev,0 ); +if (ret) + goto err_free_master; + } + } +#endif +return 0 ; err_free_master:@@ -2624,6 +2668,42 @@ static int arm_smmu_assign_dev(struct domain *d, u8 devfn,struct arm_smmu_domain *smmu_domain;struct arm_smmu_xen_domain *xen_domain =dom_iommu (d)->arch.priv; +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +ASSERT (pcidevs_locked ()); + +write_lock (&pdev->domain->pci_lock); +list_del (&pdev->domain_list); +write_unlock (&pdev->domain->pci_lock); + + pdev->domain = d; + +write_lock (&d->pci_lock); +list_add (&pdev->domain_list, &d->pdev_list); +write_unlock (&d->pci_lock); + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) + { +struct arm_smmu_master *master =dev_iommu_priv_get (dev); +if ( !iommu_quarantine ) +return 0 ; + +if ( master && master->domain ) +arm_smmu_deassign_dev (master->domain->d, devfn, dev); + +return 0 ; + } + } +#endif +spin_lock (&xen_domain->lock);/* @@ -2657,7 +2737,7 @@ out:return ret; } -static int arm_smmu_deassign_dev (struct domain *d,struct device *dev) +static int arm_smmu_deassign_dev (struct domain *d,uint8_t devfn,struct device *dev) {struct iommu_domain *io_domain =arm_smmu_get_domain (d, dev);struct arm_smmu_xen_domain *xen_domain =dom_iommu (d)->arch.priv;@@ -2669,6 +2749,21 @@ static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)return -ESRCH ; } +#ifdef CONFIG_HAS_PCI +if (dev_is_pci (dev) ) + { +struct pci_dev *pdev =dev_to_pci (dev); + +/* Ignore calls for phantom functions */ +if ( devfn != pdev->devfn ) +return 0 ; + +/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) +return 0 ; + } +#endif +spin_lock (&xen_domain->lock);arm_smmu_detach_dev (master);@@ -2687,14 +2782,16 @@ static int arm_smmu_reassign_dev(struct domain *s, struct domain *t, {int ret =0 ; -/* Don't allow remapping on other domain than hwdom */ -if ( t && !is_hardware_domain (t) ) +/* Don't allow remapping on other domain than hwdom +* or dom_io for PCI devices +*/ +if ( t && !is_hardware_domain (t) && (t != dom_io || !dev_is_pci (dev)) )return -EPERM ;if (t == s)return 0 ; - ret =arm_smmu_deassign_dev (s, dev); + ret =arm_smmu_deassign_dev (s, devfn, dev);if (ret)return ret;Signature · 1 line
2.34.1
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
In reply to Mykyta PoturaiQuoted 9 lines · Mykyta Poturai
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
This is only safe for devices present at boot time. It’s not safe for hotplugged devices, which should be quarantined.
Signature · 2 lines
Sincerely, Demi Marie Obenour (she/her/hers)
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
Hi Demi,
When replying to a thread, please keep the folks in CC unless there is a reason to drop them. Sending to just xen-devel is likely going to be lost. I personally don't always keep an eyes on discussion where I am not CCed, there are too many!
So adding re-adding the CC for you and keeping your reply as-is.
Quoted 12 lines · Demi Marie Obenour
Quoted 9 lines · Mykyta Poturai
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
This is only safe for devices present at boot time. It’s not safe for hotplugged devices, which should be quarantined.
Signature · 1 line
Julien Grall
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
Quoted 22 lines · Julien Grall
Hi Demi,
When replying to a thread, please keep the folks in CC unless there is a reason to drop them. Sending to just xen-devel is likely going to be lost. I personally don't always keep an eyes on discussion where I am not CCed, there are too many!
So adding re-adding the CC for you and keeping your reply as-is.
Quoted 12 lines · Demi Marie Obenour
Quoted 9 lines · Mykyta Poturai
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
This is only safe for devices present at boot time. It’s not safe for hotplugged devices, which should be quarantined.
Thank you! This makes me wonder if Thunderbird is a good choice for an email client, or if I should use something like Mutt or Aerc.
Signature · 2 lines
Sincerely, Demi Marie Obenour (she/her/hers)
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
Hi Demi,
Quoted 19 lines · Demi Marie Obenour
Quoted 18 lines · Julien Grall
Hi Demi,
When replying to a thread, please keep the folks in CC unless there is a reason to drop them. Sending to just xen-devel is likely going to be lost. I personally don't always keep an eyes on discussion where I am not CCed, there are too many!
So adding re-adding the CC for you and keeping your reply as-is.
Quoted 8 lines · Demi Marie Obenour
Quoted 7 lines · Mykyta Poturai
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
All pci devices are automatically assigned to hardware domain if it exists to ensure it can probe them.
This is only safe for devices present at boot time. It’s not safe for hotplugged devices, which should be quarantined.
Thank you! This makes me wonder if Thunderbird is a good choice for an email client, or if I should use something like Mutt or Aerc.
I have been using Thunderbird for the past 10 years without any issue.
The UI tends to offer me two options "reply" and "reply all". I need to click on the latter to CC everyone.
I am not sure whether you can hide the "reply" (so drop all the CC) only.
Cheers,
Signature · 1 line
Julien Grall
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
In reply to Julien GrallQuoted 8 lines · Demi Marie Obenour
Quoted 8 lines · Mykyta Poturai
Quoted 7 lines
From: Rahul Singh <[email protected]>
Implement support for PCI devices in the SMMU driver. Trigger iommu-map parsing when new PCI device is added. Add checks to assign/deassign functions to ensure PCI devices are handled correctly. Implement basic quarantining.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
All pci devices are automatically assigned to hardware domain if it exists
to ensure it can probe them.This is only safe for devices present at boot time. It’s not safe for hotplugged devices, which should be quarantined.
Hi Demi,
Could you please explain a little more in detail what do you think the issues will be here? As far as I understand quarantining is only relevant for transitioning devices between domains. Maybe I am missing something here.
Signature · 1 line
Mykyta
Re: [PATCH v11 4/7] xen/arm: smmuv3: Add PCI devices support for SMMUv3
In reply to Mykyta PoturaiHi Mykyta,
I have only skimmed through the patch. But there is something that caught my eye in both this patch and the one for the SMMUv2.
xen/drivers/passthrough/arm/smmu-v3.c static int arm_smmu_assign_dev(struct domain *d, u8 devfn, · line 2700
Quoted 9 lines · Mykyta Poturai
xen/drivers/passthrough/arm/smmu-v3.c +9
-0+/* dom_io is used as a sentinel for quarantined devices */ +if ( d == dom_io ) + { +struct arm_smmu_master *master =dev_iommu_priv_get (dev); +if ( !iommu_quarantine ) +return 0 ; + +if ( master && master->domain ) +arm_smmu_deassign_dev (master->domain->d, devfn, dev);
arm_smmu_deassign_dev() can return an error. Can you explain why this is fine to ignore it?
xen/drivers/passthrough/arm/smmu-v3.c static int arm_smmu_assign_dev(struct domain *d, u8 devfn, · line 2706
Quoted 6 lines
xen/drivers/passthrough/arm/smmu-v3.c +6
-0+ + return 0; + } + } +#endif +
Cheers,
Signature · 1 line
Julien Grall
PATCH v11 5/7 xen/arm: Fix mapping for PCI bridge mmio region
In reply to Mykyta PoturaiFrom: Rahul Singh <[email protected]>
Current code skip the mapping for PCI bridge MMIO region to dom0 when pci_passthrough_enabled flag is set. Mapping should be skip when has_vpci(d) is enabled for the domain, as we need to skip the mapping only when VPCI handler are registered for ECAM.
---
This patch was originally picked up from [1]
v10->v11:
* no change
v9->v10:
* no change
v8->v9:
* no change
v7->v8:
* no change
v6->v7:
* add Julien's A-b
v5->v6:
* drop unrelated change in xen/arch/arm/domain_build.c:handle_linux_pci_domain()
v4->v5:
* new patch
changes since picking up from [1]:
* rebase on top of "dynamic node programming using overlay dtbo" series
* replace !is_pci_passthrough_enabled() check with !IS_ENABLED(CONFIG_HAS_PCI) instead of removing
[1] https://lists.xenproject.org/archives/html/xen-devel/2023-07/msg00483.html
--- xen/arch/arm/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
xen/arch/arm/device.c +1 -1
@@ -268,7 +268,7 @@ int handle_device(struct domain *d, struct dt_device_node *dev, p2m_type_t p2mt, .d = d, .p2mt = p2mt, .skip_mapping = !own_device || - (is_pci_passthrough_enabled () && + (has_vpci (d) && (device_get_class(dev) == DEVICE_PCI_HOSTBRIDGE)), .iomem_ranges = iomem_ranges, .irq_ranges = irq_ranges
Signature · 1 line
2.34.1
PATCH v11 6/7 xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
In reply to Mykyta PoturaiFrom: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU. PHYSDEVOP_pci_device_reset is left untouched as it does not have the pci_passthrough_enabled check.
Because pci_passthrough is not always enabled on all architectures, add a new function arch_pci_device_physdevop that checks if we need to enable a subset of the PCI subsystem related to managing IOMMU configuration for PCI devices.
Enable pci_init() for initializing Xen's internal PCI subsystem, and allow PHYSDEVOP_pci_device_add when pci-passthrough is disabled.
---
hmm. Since
dec9e02f3190 ("xen: avoid generation of stub <asm/pci.h> header")
Should we also move is_pci_passthrough_enabled() back to xen/arch/arm/include/asm/pci.h ? Not sure if PPC/RISC-V will plan on using this check.
v10->v11:
* always_inline -> inline
* add comments
* clarify reset sub-op handling in the commit message
v9->v10:
* move iommu_enabled check in a separate arch function
* add Stefano's RB
v8->v9:
* move iommu_enabled check inside is_pci_passthrough_enabled()
v7->v8:
* bring back x86 definition of is_pci_passthrough_enabled()
v6->v7:
* remove x86 definition of is_pci_passthrough_enabled()
* update comments
* make pci_physdev_op checks stricter
v5->v6:
* new patch - this effectively replaces
("Revert "xen/arm: Add cmdline boot option "pci-passthrough = <boolean>""")
--- xen/arch/arm/include/asm/pci.h | 2 ++ xen/arch/arm/pci/pci.c | 14 +++++++++++++- xen/arch/x86/include/asm/pci.h | 6 ++++++ xen/drivers/pci/physdev.c | 4 ++-- xen/include/xen/pci.h | 5 +++++ 5 files changed, 28 insertions(+), 3 deletions(-)
xen/arch/arm/include/asm/pci.h +2 -0
@@ -128,6 +128,8 @@ int pci_host_bridge_mappings(struct domain *d);bool pci_check_bar (const struct pci_dev *pdev,mfn_t start,mfn_t end); +bool arch_pci_device_physdevop (void ); +#else /*!CONFIG_HAS_PCI*/ struct pci_dev ;
xen/arch/arm/pci/pci.c +13 -1
@@ -16,6 +16,7 @@#include <xen/device_tree.h> #include <xen/errno.h> #include <xen/init.h> +#include <xen/iommu.h> #include <xen/param.h> #include <xen/pci.h>
@@ -75,6 +76,17 @@ static int __init acpi_pci_init(void) }#endif +/* +* Platform-specific PCI host dependencies require dom0 to handle +* initialization and issue PHYSDEVOP_pci_device_add/remove calls for SMMU +* device registration. This check is used to enable the minimal PCI +* subsystem required for dom0 operation when PCI passthrough is disabled. +*/ +bool arch_pci_device_physdevop (void ) +{ +return iommu_enabled; +} +/* By default pci passthrough is disabled. */ bool __read_mostly pci_passthrough_enabled;boolean_param ("pci-passthrough" , pci_passthrough_enabled);
@@ -85,7 +97,7 @@ static int __init pci_init(void)* Enable PCI passthrough when has been enabled explicitly * (pci-passthrough=on). */ -if ( !pci_passthrough_enabled ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop () )return 0 ;if (pci_add_segment (0 ) )
xen/arch/x86/include/asm/pci.h +6 -0
@@ -67,4 +67,10 @@ static inline bool pci_check_bar(const struct pci_dev *pdev, return is_memory_hole(start, end); } +/* PCI passthrough is always enabled on x86 so no special handling is needed */ +static inline bool arch_pci_device_physdevop (void ) +{ +return false; +} +#endif /* __X86_PCI_H__ */
xen/drivers/pci/physdev.c +2 -2
@@ -19,7 +19,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)struct pci_dev_info pdev_info;nodeid_t node =NUMA_NO_NODE ; -if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ; ret = -EFAULT ;
@@ -57,7 +57,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)case PHYSDEVOP_pci_device_remove: {struct physdev_pci_device dev; -if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ; ret = -EFAULT ;
xen/include/xen/pci.h +5 -0
@@ -79,6 +79,11 @@ static inline bool is_pci_passthrough_enabled(void)return false; } +static inline bool arch_pci_device_physdevop (void ) +{ +return false; +} +#endif struct pci_dev_info {
Signature · 1 line
2.34.1
Re: [PATCH v11 6/7] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
Quoted 8 lines · Mykyta Poturai
From: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU.
PHYSDEVOP_pci_device_resetis left untouched as it does not have thepci_passthrough_enabledcheck.
Just to re-raise the question here: Is this actually correct?
Quoted 12 lines
xen/drivers/pci/physdev.c +1
-1@@ -19,7 +19,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)struct pci_dev_info pdev_info;nodeid_t node =NUMA_NO_NODE ; -if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ; ret = -EFAULT ;
xen/drivers/pci/physdev.c ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg) · line 61
Quoted 6 lines
xen/drivers/pci/physdev.c +1
-1@@ -57,7 +57,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)case PHYSDEVOP_pci_device_remove: {struct physdev_pci_device dev; -if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ;
Nit (style): You're losing a relevant blank each.
Jan
Re: [PATCH v11 6/7] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
Quoted 12 lines · Jan Beulich
Quoted 8 lines · Mykyta Poturai
From: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU.
PHYSDEVOP_pci_device_resetis left untouched as it does not have thepci_passthrough_enabledcheck.Just to re-raise the question here: Is this actually correct?
I'm afraid I don't quite understand your concerns here.
The purpose of this patch is to relax the pci_passthrough_enabled checks and make PCI physdev ops work with passthrough disabled.
The reset op worked independently of PCI passthrough being on or off and will continue to do so after this patch.
If your concerns are about the correctness of allowing reset to always work, you specifically requested this behavior in the patches implementing it here[1].
Quoted 15 lines
Quoted 15 lines
xen/drivers/pci/physdev.c +1
-1@@ -19,7 +19,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)struct pci_dev_info pdev_info;nodeid_t node =NUMA_NO_NODE ; -if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ; ret = -EFAULT ;@@ -57,7 +57,7 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)case PHYSDEVOP_pci_device_remove: {struct physdev_pci_device dev;
Quoted 5 lines
xen/drivers/pci/physdev.c ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg) · line 23
Quoted 3 lines
xen/drivers/pci/physdev.c +1
-1-if ( !is_pci_passthrough_enabled () ) +if ( !is_pci_passthrough_enabled () && !arch_pci_device_physdevop ())return -EOPNOTSUPP ;Nit (style): You're losing a relevant blank each.
I will update this, thanks.
Quoted 1 line
Jan
[1]:
https://patchew.org/Xen/[email protected]/[email protected]/#[email protected]
Signature · 1 line
Mykyta
Re: [PATCH v11 6/7] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
Quoted 15 lines · Mykyta Poturai
Quoted 11 lines · Jan Beulich
Quoted 8 lines · Mykyta Poturai
From: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU.
PHYSDEVOP_pci_device_resetis left untouched as it does not have thepci_passthrough_enabledcheck.Just to re-raise the question here: Is this actually correct?
I'm afraid I don't quite understand your concerns here.
Quoted 7 lines
The purpose of this patch is to relax the
pci_passthrough_enabledchecks and make PCI physdev ops work with passthrough disabled.
The reset op worked independently of PCI passthrough being on or off and will continue to do so after this patch.
If your concerns are about the correctness of allowing reset to always work, you specifically requested this behavior in the patches implementing it here[1].
Right, yet even there I had already asked for possible differing opinions. Plus the case I had mentioned was specifically Dom0, which fits here.
Jan
Re: [PATCH v11 6/7] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
Quoted 24 lines · Jan Beulich
Quoted 15 lines · Mykyta Poturai
Quoted 11 lines · Jan Beulich
Quoted 8 lines · Mykyta Poturai
From: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU.
PHYSDEVOP_pci_device_resetis left untouched as it does not have thepci_passthrough_enabledcheck.Just to re-raise the question here: Is this actually correct?
I'm afraid I don't quite understand your concerns here.
Quoted 7 lines
The purpose of this patch is to relax the
pci_passthrough_enabledchecks and make PCI physdev ops work with passthrough disabled.
The reset op worked independently of PCI passthrough being on or off and will continue to do so after this patch.
If your concerns are about the correctness of allowing reset to always work, you specifically requested this behavior in the patches implementing it here[1].
Quoted 4 lines
Right, yet even there I had already asked for possible differing opinions. Plus the case I had mentioned was specifically Dom0, which fits here.
Jan
So I've done some testing to see the actual behavior with different combinations of pci-passthrough and iommu switches. With passthrough=off and iommu=on the reset works fine. But with both of them off, it fails because PHYSDEVOP_pci_device_add is not adding anything and therefore pci_get_pdev can't find the pdev.
I am not sure which behavior would be the correct one here for passthrought=off and iommu=off.
1. Leave it as is, reset returns -ENODEV and pciback probe fails
2. Add the same check as in add/remove, reset will return -EOPNOTSUPP and pciback probe will also fail
3. Add the same check as in add/remove but return 0 so pciback can probe the device.
Maybe you have some thoughts on this. I can't come up with an actual good reason for using pciback without pci-passthrough enabled, outside of maybe "not breaking some abstract scripts". And EOPNOTSUPP seems more descriptive than ENODEV so I strive towards option 2 if everyone okay with that.
Signature · 1 line
Mykyta
Re: [PATCH v11 6/7] xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
Quoted 43 lines · Mykyta Poturai
Quoted 24 lines · Jan Beulich
Quoted 15 lines · Mykyta Poturai
Quoted 11 lines · Jan Beulich
Quoted 8 lines · Mykyta Poturai
From: Stewart Hildebrand <[email protected]>
Enable the use of IOMMU + PCI in dom0 without having to specify "pci-passthrough=yes". Due to possible platform specific dependencies of the PCI host, we rely on dom0 to initialize it and perform a PHYSDEVOP_pci_device_add/remove call to add each device to SMMU.
PHYSDEVOP_pci_device_resetis left untouched as it does not have thepci_passthrough_enabledcheck.Just to re-raise the question here: Is this actually correct?
I'm afraid I don't quite understand your concerns here.
Quoted 7 lines
The purpose of this patch is to relax the
pci_passthrough_enabledchecks and make PCI physdev ops work with passthrough disabled.
The reset op worked independently of PCI passthrough being on or off and will continue to do so after this patch.
If your concerns are about the correctness of allowing reset to always work, you specifically requested this behavior in the patches implementing it here[1].Quoted 2 lines
Right, yet even there I had already asked for possible differing opinions. Plus the case I had mentioned was specifically Dom0, which fits here.
So I've done some testing to see the actual behavior with different combinations of pci-passthrough and iommu switches. With passthrough=off and iommu=on the reset works fine. But with both of them off, it fails because
PHYSDEVOP_pci_device_addis not adding anything and thereforepci_get_pdevcan't find the pdev.I am not sure which behavior would be the correct one here for passthrought=off and iommu=off.
1. Leave it as is, reset returns
-ENODEVand pciback probe fails
2. Add the same check as in add/remove, reset will return-EOPNOTSUPPand pciback probe will also fail
3. Add the same check as in add/remove but return 0 so pciback can probe the device.
Quoted 5 lines
Maybe you have some thoughts on this. I can't come up with an actual good reason for using pciback without pci-passthrough enabled, outside of maybe "not breaking some abstract scripts". And EOPNOTSUPP seems more descriptive than ENODEV so I strive towards option 2 if everyone okay with that.
I think I'd favor option 2, too. Without pass-through, PHYSDEVOP_pci_device_reset is pretty meaningless aiui. vPCI in particular builds on top of pass-through aiui, even if that isn't expressed like that right now (e.g. by having HAS_VPCI select HAS_PASSTHROUGH).
Jan
PATCH v11 7/7 xen/arm: Map ITS doorbell register to IOMMU page tables
In reply to Mykyta PoturaiFrom: Rahul Singh <[email protected]>
When ITS is enabled and PCI devices that are behind an SMMU generate an MSI interrupt, SMMU fault will be observed as there is currently no mapping in p2m table for the ITS translation register (GITS_TRANSLATER).
A mapping is required in the iommu page tables so that the device can generate the MSI interrupt writing to the GITS_TRANSLATER register.
The GITS_TRANSLATER register is a 32-bit register, and there is nothing else in a page containing it, so map that page.
Add new host_addr parameter to vgic_v3_its_init_virtual to prepare the foundation for DomU MSI support where guest doorbell address can differ for the host's. Note that the 1:1 check in arm_iommu_map_page remains for now, as virtual ITSes are currently only created for hwdom where the doorbell mapping is always 1:1.
---
This patch was originally picked up from [1], and commit description loosely borrowed from [2].
Example SMMUv3 fault (qemu-system-aarch64 virt model), ITS base 0x8080000:
(XEN) SMMUv3: /smmuv3@9050000: event 0x10 received:
(XEN) SMMUv3: /smmuv3@9050000: 0x0000000800000010 (XEN) SMMUv3: /smmuv3@9050000: 0x0000008000000000 (XEN) SMMUv3: /smmuv3@9050000: 0x0000000008090040 (XEN) SMMUv3: /smmuv3@9050000: 0x0000000000000000
Example SMMUv2 fault (AMD/Xilinx Versal), ITS base 0xf9020000:
(XEN) smmu: /axi/smmu@fd800000: Unhandled context fault: fsr=0x402, iova=0xf9030040, fsynr=0x12, cb=0
v10->v11:
* add Stefano's RB
v9->v10:
* map vITS doorbell to host ITS doorbell instead of always 1:1
* use simpler addr to dfn conversion
v8->v9:
* no changes
v7->v8:
* no changes
v6->v7:
* add tlb flush after mapping
* style: update formatting
* revert back to printk with XENLOG_G_ERR
v5->v6:
* switch to iommu_map() interface
* fix page_count argument
* style fixup
* use gprintk instead of printk
* add my Signed-off-by
* move to vgic_v3_its_init_virtual()
v4->v5:
* new patch
[1] https://lists.xenproject.org/archives/html/xen-devel/2023-07/msg00483.html
[2] https://gitlab.com/xen-project/people/bmarquis/xen-arm-poc/-/commit/6232a0d53377009bb7fbc3c3ab81d0153734be6b
--- xen/arch/arm/vgic-v3-its.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
xen/arch/arm/vgic-v3-its.c +23 -1
@@ -1445,11 +1445,13 @@ static const struct mmio_handler_ops vgic_its_mmio_handler = { };static int vgic_v3_its_init_virtual (struct domain *d,paddr_t guest_addr, +paddr_t host_addr,unsigned int devid_bits,unsigned int evid_bits) {struct virt_its *its;uint64_t base_attr; +paddr_t host_doorbell_addr = host_addr +ITS_DOORBELL_OFFSET ; its = xzalloc(struct virt_its);if ( !its )
@@ -1478,6 +1480,26 @@ static int vgic_v3_its_init_virtual(struct domain *d, paddr_t guest_addr,register_mmio_handler (d, &vgic_its_mmio_handler, guest_addr,SZ_64K , its); +if (is_iommu_enabled (its->d) ) + { +mfn_t mfn =maddr_to_mfn (host_doorbell_addr); +unsigned int flush_flags =0 ; +int ret =iommu_map (its->d,_dfn (PFN_DOWN (its->doorbell_address)), + mfn,1 , IOMMUF_writable, &flush_flags); + +if ( ret <0 ) + { +printk (XENLOG_G_ERR +"GICv3: Map ITS translation register for %pd failed.\n" , + its->d); +return ret; + } + + ret =iommu_iotlb_flush (its->d,_dfn (PFN_DOWN (its->doorbell_address)),1 , flush_flags); +if ( ret <0 ) +return ret; + } +/* Register the virtual ITS to be able to clean it up later. */ list_add_tail (&its->vits_list, &d->arch.vgic.vits_list);
@@ -1522,7 +1544,7 @@ int vgic_v3_its_init_domain(struct domain *d)* base and thus doorbell address. * Use the same number of device ID and event ID bits as the host. */ - ret =vgic_v3_its_init_virtual (d, hw_its->addr, + ret =vgic_v3_its_init_virtual (d, hw_its->addr, hw_its->addr, hw_its->devid_bits, hw_its->evid_bits);if ( ret )
Signature · 1 line
2.34.1