x86/hyperv: MSI parent domain conversion
v2 cover x86/hyperv: MSI parent domain conversion
The initial implementation of PCI/MSI interrupt domains in the hierarchical interrupt domain model used a shortcut by providing a global PCI/MSI domain.
This works because the PCI/MSI[X] hardware is standardized and uniform, but it violates the basic design principle of hierarchical interrupt domains:
Each hardware block involved in the interrupt delivery chain should have a separate interrupt domain.
For PCI/MSI[X], the interrupt controller is per PCI device and not a global made-up entity.
Unsurprisingly, the shortcut turned out to have downsides as it does not allow dynamic allocation of interrupt vectors after initialization and it prevents supporting IMS on PCI. For further details, see:
https://lore.kernel.org/lkml/[email protected]/
The solution is implementing per device MSI domains, this means the entities which provide global PCI/MSI domain so far have to implement MSI parent domain functionality instead.
This series:
- Fixup a dependency problem with CONFIG_GENERIC_MSI_IRQ
- converts the x86 hyperv driver to implement MSI parent domain.
Changes in v2:
- Add the first fixup patch to resolve a build failure
- Add clarification to the TODO note.
arch/x86/hyperv/irqdomain.c | 111 ++++++++++++++++++++++++------------ drivers/hv/Kconfig | 1 + drivers/irqchip/Kconfig | 1 + 3 files changed, 78 insertions(+), 35 deletions(-)
Signature · 1 line
2.39.5
PATCH v2 1/2 irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
irq-msi-lib directly uses struct msi_domain_info and MSI_FLAG_ALLOC_SIMPLE_MSI_DESCS (and likely more) which are only available when CONFIG_GENERIC_MSI_IRQ=y.
However, no dependency is specified. If it happens that CONFIG_IRQ_MSI_LIB=y while CONFIG_GENERIC_MSI_IRQ=n, the kernel fails to build.
Specify this dependency and fix the build.
--- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/irqchip/Kconfig +1 -0
@@ -74,6 +74,7 @@ config ARM_VIC_NR config IRQ_MSI_LIB bool + select GENERIC_MSI_IRQ config ARMADA_370_XP_IRQ bool
Signature · 1 line
2.39.5
PATCH v2 2/2 x86/hyperv: Switch to msi_create_parent_irq_domain()
In reply to Nam CaoMove away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain().
While doing the conversion, I noticed that hv_irq_compose_msi_msg() is doing more than it is supposed to (composing message content). The interrupt allocation bits should be moved into hv_msi_domain_alloc(). However, I have no hardware to test this change, therefore I leave a TODO note.
--- arch/x86/hyperv/irqdomain.c | 111 ++++++++++++++++++++++++------------ drivers/hv/Kconfig | 1 + 2 files changed, 77 insertions(+), 35 deletions(-)
arch/x86/hyperv/irqdomain.c +76 -35
@@ -10,6 +10,7 @@#include <linux/pci.h> #include <linux/irq.h> +#include <linux/irqchip/irq-msi-lib.h> #include <asm/mshyperv.h> static int hv_map_interrupt(union hv_device_id device_id, bool level,
@@ -276,59 +277,99 @@ static void hv_teardown_msi_irq(struct pci_dev *dev, struct irq_data *irqd)hv_status_err (status,"\n" ); } -static void hv_msi_free_irq (struct irq_domain *domain, -struct msi_domain_info *info,unsigned int virq) -{ -struct irq_data *irqd =irq_get_irq_data (virq); -struct msi_desc *desc; - -if (!irqd) -return ; - - desc =irq_data_get_msi_desc (irqd); -if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) -return ; - -hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); -} -/* * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, * which implement the MSI or MSI-X Capability Structure. */ static struct irq_chip hv_pci_msi_controller = { .name ="HV-PCI-MSI" , - .irq_unmask = pci_msi_unmask_irq, - .irq_mask = pci_msi_mask_irq, .irq_ack = irq_chip_ack_parent, - .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_compose_msi_msg = hv_irq_compose_msi_msg, - .irq_set_affinity = msi_domain_set_affinity, - .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED , + .irq_set_affinity = irq_chip_set_affinity_parent, }; -static struct msi_domain_ops pci_msi_domain_ops = { - .msi_free = hv_msi_free_irq, - .msi_prepare = pci_msi_prepare, +static bool hv_init_dev_msi_info (struct device *dev,struct irq_domain *domain, +struct irq_domain *real_parent,struct msi_domain_info *info) +{ +struct irq_chip *chip = info->chip; + +if (!msi_lib_init_dev_msi_info (dev, domain, real_parent, info)) +return false; + + chip->flags |=IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED ; + + info->ops->msi_prepare = pci_msi_prepare; + +return true; +} + +#define HV_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK | MSI_FLAG_PCI_MSIX) +#define HV_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS) + +static struct msi_parent_ops hv_msi_parent_ops = { + .supported_flags =HV_MSI_FLAGS_SUPPORTED , + .required_flags =HV_MSI_FLAGS_REQUIRED , + .bus_select_token =DOMAIN_BUS_NEXUS , + .bus_select_mask =MATCH_PCI_MSI , + .chip_flags =MSI_CHIP_FLAG_SET_ACK , + .prefix ="HV-" , + .init_dev_msi_info = hv_init_dev_msi_info, }; -static struct msi_domain_info hv_pci_msi_domain_info = { - .flags =MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | -MSI_FLAG_PCI_MSIX , - .ops = &pci_msi_domain_ops, - .chip = &hv_pci_msi_controller, - .handler = handle_edge_irq, - .handler_name ="edge" , +static int hv_msi_domain_alloc (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs, +void *arg) +{ +/* +* TODO: The allocation bits of hv_irq_compose_msi_msg(), i.e. everything except +* entry_to_msi_msg() should be in here. +*/ + +int ret; + + ret =irq_domain_alloc_irqs_parent (d, virq, nr_irqs, arg); +if (ret) +return ret; + +for (int i =0 ; i < nr_irqs; ++i) { +irq_domain_set_info (d, virq + i,0 , &hv_pci_msi_controller,NULL , + handle_edge_irq,NULL ,"edge" ); + } +return 0 ; +} + +static void hv_msi_domain_free (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs) +{ +for (int i =0 ; i < nr_irqs; ++i) { +struct irq_data *irqd =irq_domain_get_irq_data (d, virq); +struct msi_desc *desc; + + desc =irq_data_get_msi_desc (irqd); +if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) +continue ; + +hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); + } +irq_domain_free_irqs_top (d, virq, nr_irqs); +} + +static const struct irq_domain_ops hv_msi_domain_ops = { + .select = msi_lib_irq_domain_select, + .alloc = hv_msi_domain_alloc, + .free = hv_msi_domain_free, };struct irq_domain *__init hv_create_pci_msi_domain (void ) {struct irq_domain *d =NULL ; -struct fwnode_handle *fn; - fn =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ); -if (fn) - d =pci_msi_create_irq_domain (fn, &hv_pci_msi_domain_info, x86_vector_domain); +struct irq_domain_info info = { + .fwnode =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ), + .ops = &hv_msi_domain_ops, + .parent = x86_vector_domain, + }; + +if (info.fwnode) + d =msi_create_parent_irq_domain (&info, &hv_msi_parent_ops);/* No point in going further if we can't get an irq domain */ BUG_ON (!d);
drivers/hv/Kconfig +1 -0
@@ -10,6 +10,7 @@ config HYPERV select X86_HV_CALLBACK_VECTOR if X86 select OF_EARLY_FLATTREE if OF select SYSFB if !HYPERV_VTL_MODE + select IRQ_MSI_LIB if X86 help Select this option to run Linux as a Hyper-V client operating system.
Signature · 1 line
2.39.5
Wei Liu
maintainerRe: [PATCH v2 2/2] x86/hyperv: Switch to msi_create_parent_irq_domain()
CC Nuno who is also touching on this file.
Nam, thanks for this patch.
Nuno's patches fix a few bugs with the current implementation. I expect those patches to have contextual conflicts with this patch. I would like to commit Nuno's patches first since those are bug fixes, and then circle back to this one.
Nuno, can you please review this patch?
Quoted 177 lines · Nam Cao
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().While doing the conversion, I noticed that
hv_irq_compose_msi_msg()is doing more than it is supposed to (composing message content). The interrupt allocation bits should be moved intohv_msi_domain_alloc(). However, I have no hardware to test this change, therefore I leave a TODO note.Signed-off-by Nam Cao <[email protected]>--- arch/x86/hyperv/irqdomain.c | 111 ++++++++++++++++++++++++------------ drivers/hv/Kconfig | 1 + 2 files changed, 77 insertions(+), 35 deletions(-)arch/x86/hyperv/irqdomain.c +76
-35@@ -10,6 +10,7 @@#include <linux/pci.h> #include <linux/irq.h> +#include <linux/irqchip/irq-msi-lib.h> #include <asm/mshyperv.h> static int hv_map_interrupt(union hv_device_id device_id, bool level,@@ -276,59 +277,99 @@ static void hv_teardown_msi_irq(struct pci_dev *dev, struct irq_data *irqd)hv_status_err (status,"\n" ); } -static void hv_msi_free_irq (struct irq_domain *domain, -struct msi_domain_info *info,unsigned int virq) -{ -struct irq_data *irqd =irq_get_irq_data (virq); -struct msi_desc *desc; - -if (!irqd) -return ; - - desc =irq_data_get_msi_desc (irqd); -if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) -return ; - -hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); -} -/* * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, * which implement the MSI or MSI-X Capability Structure. */ static struct irq_chip hv_pci_msi_controller = { .name ="HV-PCI-MSI" , - .irq_unmask = pci_msi_unmask_irq, - .irq_mask = pci_msi_mask_irq, .irq_ack = irq_chip_ack_parent, - .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_compose_msi_msg = hv_irq_compose_msi_msg, - .irq_set_affinity = msi_domain_set_affinity, - .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED , + .irq_set_affinity = irq_chip_set_affinity_parent, }; -static struct msi_domain_ops pci_msi_domain_ops = { - .msi_free = hv_msi_free_irq, - .msi_prepare = pci_msi_prepare, +static bool hv_init_dev_msi_info (struct device *dev,struct irq_domain *domain, +struct irq_domain *real_parent,struct msi_domain_info *info) +{ +struct irq_chip *chip = info->chip; + +if (!msi_lib_init_dev_msi_info (dev, domain, real_parent, info)) +return false; + + chip->flags |=IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED ; + + info->ops->msi_prepare = pci_msi_prepare; + +return true; +} + +#define HV_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK | MSI_FLAG_PCI_MSIX) +#define HV_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS) + +static struct msi_parent_ops hv_msi_parent_ops = { + .supported_flags =HV_MSI_FLAGS_SUPPORTED , + .required_flags =HV_MSI_FLAGS_REQUIRED , + .bus_select_token =DOMAIN_BUS_NEXUS , + .bus_select_mask =MATCH_PCI_MSI , + .chip_flags =MSI_CHIP_FLAG_SET_ACK , + .prefix ="HV-" , + .init_dev_msi_info = hv_init_dev_msi_info, }; -static struct msi_domain_info hv_pci_msi_domain_info = { - .flags =MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | -MSI_FLAG_PCI_MSIX , - .ops = &pci_msi_domain_ops, - .chip = &hv_pci_msi_controller, - .handler = handle_edge_irq, - .handler_name ="edge" , +static int hv_msi_domain_alloc (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs, +void *arg) +{ +/* +* TODO: The allocation bits of hv_irq_compose_msi_msg(), i.e. everything except +* entry_to_msi_msg() should be in here. +*/ + +int ret; + + ret =irq_domain_alloc_irqs_parent (d, virq, nr_irqs, arg); +if (ret) +return ret; + +for (int i =0 ; i < nr_irqs; ++i) { +irq_domain_set_info (d, virq + i,0 , &hv_pci_msi_controller,NULL , + handle_edge_irq,NULL ,"edge" ); + } +return 0 ; +} + +static void hv_msi_domain_free (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs) +{ +for (int i =0 ; i < nr_irqs; ++i) { +struct irq_data *irqd =irq_domain_get_irq_data (d, virq); +struct msi_desc *desc; + + desc =irq_data_get_msi_desc (irqd); +if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) +continue ; + +hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); + } +irq_domain_free_irqs_top (d, virq, nr_irqs); +} + +static const struct irq_domain_ops hv_msi_domain_ops = { + .select = msi_lib_irq_domain_select, + .alloc = hv_msi_domain_alloc, + .free = hv_msi_domain_free, };struct irq_domain *__init hv_create_pci_msi_domain (void ) {struct irq_domain *d =NULL ; -struct fwnode_handle *fn; - fn =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ); -if (fn) - d =pci_msi_create_irq_domain (fn, &hv_pci_msi_domain_info, x86_vector_domain); +struct irq_domain_info info = { + .fwnode =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ), + .ops = &hv_msi_domain_ops, + .parent = x86_vector_domain, + }; + +if (info.fwnode) + d =msi_create_parent_irq_domain (&info, &hv_msi_parent_ops);/* No point in going further if we can't get an irq domain */ BUG_ON (!d);drivers/hv/Kconfig +1
-0@@ -10,6 +10,7 @@ config HYPERV select X86_HV_CALLBACK_VECTOR if X86 select OF_EARLY_FLATTREE if OF select SYSFB if !HYPERV_VTL_MODE + select IRQ_MSI_LIB if X86 help Select this option to run Linux as a Hyper-V client operating system.Signature · 1 line
2.39.5
Re: [PATCH v2 2/2] x86/hyperv: Switch to msi_create_parent_irq_domain()
Quoted 11 lines · Wei Liu
CC Nuno who is also touching on this file.
Nam, thanks for this patch.
Nuno's patches fix a few bugs with the current implementation. I expect those patches to have contextual conflicts with this patch. I would like to commit Nuno's patches first since those are bug fixes, and then circle back to this one.
Nuno, can you please review this patch?
I don't think I can give a Reviewed-by since I don't have the context for these changes.
It doesn't look like this conflicts with the changes in my patches.
The TODO looks fine to me, it can be addressed in a followup.
Nuno
Quoted 178 lines · Nam Cao
Quoted 177 lines
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().While doing the conversion, I noticed that
hv_irq_compose_msi_msg()is doing more than it is supposed to (composing message content). The interrupt allocation bits should be moved intohv_msi_domain_alloc(). However, I have no hardware to test this change, therefore I leave a TODO note.Signed-off-by Nam Cao <[email protected]>--- arch/x86/hyperv/irqdomain.c | 111 ++++++++++++++++++++++++------------ drivers/hv/Kconfig | 1 + 2 files changed, 77 insertions(+), 35 deletions(-)arch/x86/hyperv/irqdomain.c +76
-35@@ -10,6 +10,7 @@#include <linux/pci.h> #include <linux/irq.h> +#include <linux/irqchip/irq-msi-lib.h> #include <asm/mshyperv.h> static int hv_map_interrupt(union hv_device_id device_id, bool level,@@ -276,59 +277,99 @@ static void hv_teardown_msi_irq(struct pci_dev *dev, struct irq_data *irqd)hv_status_err (status,"\n" ); } -static void hv_msi_free_irq (struct irq_domain *domain, -struct msi_domain_info *info,unsigned int virq) -{ -struct irq_data *irqd =irq_get_irq_data (virq); -struct msi_desc *desc; - -if (!irqd) -return ; - - desc =irq_data_get_msi_desc (irqd); -if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) -return ; - -hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); -} -/* * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, * which implement the MSI or MSI-X Capability Structure. */ static struct irq_chip hv_pci_msi_controller = { .name ="HV-PCI-MSI" , - .irq_unmask = pci_msi_unmask_irq, - .irq_mask = pci_msi_mask_irq, .irq_ack = irq_chip_ack_parent, - .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_compose_msi_msg = hv_irq_compose_msi_msg, - .irq_set_affinity = msi_domain_set_affinity, - .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED , + .irq_set_affinity = irq_chip_set_affinity_parent, }; -static struct msi_domain_ops pci_msi_domain_ops = { - .msi_free = hv_msi_free_irq, - .msi_prepare = pci_msi_prepare, +static bool hv_init_dev_msi_info (struct device *dev,struct irq_domain *domain, +struct irq_domain *real_parent,struct msi_domain_info *info) +{ +struct irq_chip *chip = info->chip; + +if (!msi_lib_init_dev_msi_info (dev, domain, real_parent, info)) +return false; + + chip->flags |=IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MOVE_DEFERRED ; + + info->ops->msi_prepare = pci_msi_prepare; + +return true; +} + +#define HV_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK | MSI_FLAG_PCI_MSIX) +#define HV_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS) + +static struct msi_parent_ops hv_msi_parent_ops = { + .supported_flags =HV_MSI_FLAGS_SUPPORTED , + .required_flags =HV_MSI_FLAGS_REQUIRED , + .bus_select_token =DOMAIN_BUS_NEXUS , + .bus_select_mask =MATCH_PCI_MSI , + .chip_flags =MSI_CHIP_FLAG_SET_ACK , + .prefix ="HV-" , + .init_dev_msi_info = hv_init_dev_msi_info, }; -static struct msi_domain_info hv_pci_msi_domain_info = { - .flags =MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | -MSI_FLAG_PCI_MSIX , - .ops = &pci_msi_domain_ops, - .chip = &hv_pci_msi_controller, - .handler = handle_edge_irq, - .handler_name ="edge" , +static int hv_msi_domain_alloc (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs, +void *arg) +{ +/* +* TODO: The allocation bits of hv_irq_compose_msi_msg(), i.e. everything except +* entry_to_msi_msg() should be in here. +*/ + +int ret; + + ret =irq_domain_alloc_irqs_parent (d, virq, nr_irqs, arg); +if (ret) +return ret; + +for (int i =0 ; i < nr_irqs; ++i) { +irq_domain_set_info (d, virq + i,0 , &hv_pci_msi_controller,NULL , + handle_edge_irq,NULL ,"edge" ); + } +return 0 ; +} + +static void hv_msi_domain_free (struct irq_domain *d,unsigned int virq,unsigned int nr_irqs) +{ +for (int i =0 ; i < nr_irqs; ++i) { +struct irq_data *irqd =irq_domain_get_irq_data (d, virq); +struct msi_desc *desc; + + desc =irq_data_get_msi_desc (irqd); +if (!desc || !desc->irq ||WARN_ON_ONCE (!dev_is_pci (desc->dev))) +continue ; + +hv_teardown_msi_irq (to_pci_dev (desc->dev), irqd); + } +irq_domain_free_irqs_top (d, virq, nr_irqs); +} + +static const struct irq_domain_ops hv_msi_domain_ops = { + .select = msi_lib_irq_domain_select, + .alloc = hv_msi_domain_alloc, + .free = hv_msi_domain_free, };struct irq_domain *__init hv_create_pci_msi_domain (void ) {struct irq_domain *d =NULL ; -struct fwnode_handle *fn; - fn =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ); -if (fn) - d =pci_msi_create_irq_domain (fn, &hv_pci_msi_domain_info, x86_vector_domain); +struct irq_domain_info info = { + .fwnode =irq_domain_alloc_named_fwnode ("HV-PCI-MSI" ), + .ops = &hv_msi_domain_ops, + .parent = x86_vector_domain, + }; + +if (info.fwnode) + d =msi_create_parent_irq_domain (&info, &hv_msi_parent_ops);/* No point in going further if we can't get an irq domain */ BUG_ON (!d);drivers/hv/Kconfig +1
-0@@ -10,6 +10,7 @@ config HYPERV select X86_HV_CALLBACK_VECTOR if X86 select OF_EARLY_FLATTREE if OF select SYSFB if !HYPERV_VTL_MODE + select IRQ_MSI_LIB if X86 help Select this option to run Linux as a Hyper-V client operating system.Signature · 1 line
2.39.5
Re: [PATCH v2 2/2] x86/hyperv: Switch to msi_create_parent_irq_domain()
Quoted 10 lines · Nuno Das Neves
Quoted 9 lines · Wei Liu
CC Nuno who is also touching on this file.
Nam, thanks for this patch.
Nuno's patches fix a few bugs with the current implementation. I expect those patches to have contextual conflicts with this patch. I would like to commit Nuno's patches first since those are bug fixes, and then circle back to this one.
Quoted 5 lines
Quoted 2 lines
Nuno, can you please review this patch?
I don't think I can give a Reviewed-by since I don't have the context for these changes.
The cover letter provides the information along with a link for deeper information:
https://lore.kernel.org/all/[email protected]
Quoted 1 line
It doesn't look like this conflicts with the changes in my patches.
It might not look like it, but reality tells a different story:
Applying patch _PATCH_v2_2_2_x86_hyperv_Switch_to_msi_create_parent_irq_domain_.patch patching file arch/x86/hyperv/irqdomain.c
Hunk #1 FAILED at 10.
Hunk #2 FAILED at 276.
2 out of 2 hunks FAILED -- rejects in file arch/x86/hyperv/irqdomain.c patching file drivers/hv/Kconfig
Hunk #1 FAILED at 10.
1 out of 1 hunk FAILED -- rejects in file drivers/hv/Kconfig
Nam, can you please redo the patch against the hyperv tree?
Thanks,
tglx