sd: Add RPMB emulation to eMMC model
v3 cover sd: Add RPMB emulation to eMMC model
Changes in v3 [1]:
- rebased, dropping merged patches
- rework image alignment rules to match hardware
- improve/fix mkemmc script
- add emmc documentation
Changes in v2:
- handle write counter expiry
- assert() availability of QCRYPTO_HASH_ALGO_SHA256
- add missing SPDX-License-Identifier
This closes an old gap in system integration testing for the very complex ARM firmware stacks by adding fairly advanced Replay Protected Memory Block (RPMB) emulation to the eMMC device model. Key programming and message authentication are working, so is the write counter. Known users are happy with the result. What is missing, but not only for RPMB- related registers, is state persistence across QEMU restarts. This is OK at this stage for most test scenarios, though, and could still be added later on.
What can already be done with it is demonstrated in the WIP branch of isar-cip-core at [2]: TF-A + OP-TEE + StandaloneMM TA + fTPM TA, used by U-Boot and Linux for UEFI variable storage and TPM scenarios. If you want to try: build qemu-arm64 target for trixie with 6.12-cip *head* kernel, enable secure boot and disk encryption, then run
$ QEMU_PATH=/path/to/qemu-build/ ./start-qemu.sh
Deploy snakeoil keys into PK, KEK and db after first boot to enable secure booting:
root@demo:~# cert-to-efi-sig-list PkKek-1-snakeoil.pem PK.esl root@demo:~# sign-efi-sig-list -k PkKek-1-snakeoil.key -c PkKek-1-snakeoil.pem PK PK.esl PK.auth root@demo:~# efi-updatevar -f PK.auth db root@demo:~# efi-updatevar -f PK.auth KEK root@demo:~# efi-updatevar -f PK.auth PK
Note that emulation is a bit slow in general, and specifically the partition encryption on first boot is taking 20 min. - we should probably reduce its size or understand if there is still something to optimize.
Jan
[1] https://github.com/siemens/qemu/commits/queues/emmc/
[2] https://gitlab.com/cip-project/cip-core/isar-cip-core/-/commits/wip/qemu-rpmb
Jan Kiszka (6):
hw/sd/sdcard: Fix size check for backing block image hw/sd/sdcard: Allow user-instantiated eMMC hw/sd/sdcard: Add basic support for RPMB partition hw/sd/sdcard: Handle RPMB MAC field
scripts: Add helper script to generate eMMC block device images
docs: Add eMMC device model description
docs/system/device-emulation.rst | 1 + docs/system/devices/emmc.rst | 52 +++++ hw/sd/sd.c | 349 ++++++++++++++++++++++++++++--- hw/sd/sdmmc-internal.h | 21 ++ hw/sd/trace-events | 2 + scripts/mkemmc.sh | 199 ++++++++++++++++++ 6 files changed, 596 insertions(+), 28 deletions(-) create mode 100644 docs/system/devices/emmc.rst create mode 100755 scripts/mkemmc.sh
Signature · 1 line
2.51.0
PATCH v3 1/6 hw/sd/sdcard: Fix size check for backing block image
From: Jan Kiszka <[email protected]>
Alignment rules apply the the individual partitions (user, boot, later on also RPMB) and depend both on the size of the image and the type of the device. Up to and including 2GB, the power-of-2 rule applies to the user data area. For larger images, multiples of 512 sectors must be used for eMMC and multiples of 512K for SD-cards. Fix the check accordingly and also detect if the image is too small to even hold the boot partitions.
---
CC: Warner Losh <[email protected]>
CC: Cédric Le Goater <[email protected]>
CC: Joel Stanley <[email protected]>
CC: Alistair Francis <[email protected]>
CC: Alexander Bulekov <[email protected]>
--- hw/sd/sd.c | 61 +++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 19 deletions(-)
hw/sd/sd.c +42 -19
@@ -2759,6 +2759,28 @@ static void sd_instance_finalize(Object *obj)timer_free (sd->ocr_power_timer); } +static void sd_blk_size_error (SDState *sd,int64_t blk_size, +int64_t blk_size_aligned,const char *rule, +Error **errp) +{ +const char *dev_type =sd_is_emmc (sd) ?"eMMC" :"SD card" ; +char *blk_size_str; + + blk_size_str =size_to_str (blk_size); +error_setg (errp,"Invalid %s size: %s" , dev_type, blk_size_str); +g_free (blk_size_str); + + blk_size_str =size_to_str (blk_size_aligned); +error_append_hint (errp, +"%s size has to be %s, e.g. %s.\n" +"You can resize disk images with" +" 'qemu-img resize <imagefile> <new-size>'\n" +"(note that this will lose data if you make the" +" image smaller than it currently is).\n" , + dev_type, rule, blk_size_str); +g_free (blk_size_str); +} +static void sd_realize (DeviceState *dev,Error **errp) {SDState *sd =SDMMC_COMMON (dev);
@@ -2781,25 +2803,26 @@ static void sd_realize(DeviceState *dev, Error **errp)return ; } - blk_size =blk_getlength (sd->blk); -if (blk_size >0 && !is_power_of_2 (blk_size)) { -int64_t blk_size_aligned =pow2ceil (blk_size); -char *blk_size_str; - - blk_size_str =size_to_str (blk_size); -error_setg (errp,"Invalid SD card size: %s" , blk_size_str); -g_free (blk_size_str); - - blk_size_str =size_to_str (blk_size_aligned); -error_append_hint (errp, -"SD card size has to be a power of 2, e.g. %s.\n" -"You can resize disk images with" -" 'qemu-img resize <imagefile> <new-size>'\n" -"(note that this will lose data if you make the" -" image smaller than it currently is).\n" , - blk_size_str); -g_free (blk_size_str); - + blk_size =blk_getlength (sd->blk) - sd->boot_part_size *2 ; +if (blk_size >SDSC_MAX_CAPACITY ) { +if (sd_is_emmc (sd) && blk_size % (1 <<HWBLOCK_SHIFT ) !=0 ) { +int64_t blk_size_aligned = + ((blk_size >>HWBLOCK_SHIFT ) +1 ) <<HWBLOCK_SHIFT ; +sd_blk_size_error (sd, blk_size, blk_size_aligned, +"multiples of 512" , errp); +return ; + }else if (!sd_is_emmc (sd) && blk_size % (512 * KiB)) { +int64_t blk_size_aligned = ((blk_size >>19 ) +1 ) <<19 ; +sd_blk_size_error (sd, blk_size, blk_size_aligned, +"multiples of 512K" , errp); +return ; + } + }else if (blk_size >0 && !is_power_of_2 (blk_size)) { +sd_blk_size_error (sd, blk_size,pow2ceil (blk_size),"a power of 2" , + errp); +return ; + }else if (blk_size <0 ) { +error_setg (errp,"eMMC image smaller than boot partitions" );return ; }
Signature · 1 line
2.51.0
Re: [PATCH v3 1/6] hw/sd/sdcard: Fix size check for backing block image
Quoted 11 lines · Jan Kiszka
From: Jan Kiszka <[email protected]>
Alignment rules apply the the individual partitions (user, boot, later on also RPMB) and depend both on the size of the image and the type of the device. Up to and including 2GB, the power-of-2 rule applies to the user data area. For larger images, multiples of 512 sectors must be used for eMMC and multiples of 512K for SD-cards. Fix the check accordingly and also detect if the image is too small to even hold the boot partitions.
Signed-off-by Jan Kiszka <[email protected]>
Quoted 9 lines
---
CC: Warner Losh <[email protected]>
CC: Cédric Le Goater <[email protected]>
CC: Joel Stanley <[email protected]>
CC: Alistair Francis <[email protected]>
CC: Alexander Bulekov <[email protected]>--- hw/sd/sd.c | 61 +++++++++++++++++++++++++++++++++++++-----------------
Quoted 89 lines
1 file changed, 42 insertions(+), 19 deletions(-)hw/sd/sd.c +22
-12@@ -2759,6 +2759,28 @@ static void sd_instance_finalize(Object *obj)timer_free (sd->ocr_power_timer); } +static void sd_blk_size_error (SDState *sd,int64_t blk_size, +int64_t blk_size_aligned,const char *rule, +Error **errp) +{ +const char *dev_type =sd_is_emmc (sd) ?"eMMC" :"SD card" ; +char *blk_size_str; + + blk_size_str =size_to_str (blk_size); +error_setg (errp,"Invalid %s size: %s" , dev_type, blk_size_str); +g_free (blk_size_str); + + blk_size_str =size_to_str (blk_size_aligned); +error_append_hint (errp, +"%s size has to be %s, e.g. %s.\n" +"You can resize disk images with" +" 'qemu-img resize <imagefile> <new-size>'\n" +"(note that this will lose data if you make the" +" image smaller than it currently is).\n" , + dev_type, rule, blk_size_str); +g_free (blk_size_str); +} +static void sd_realize (DeviceState *dev,Error **errp) {SDState *sd =SDMMC_COMMON (dev);@@ -2781,25 +2803,26 @@ static void sd_realize(DeviceState *dev, Error **errp)return ; } - blk_size =blk_getlength (sd->blk); -if (blk_size >0 && !is_power_of_2 (blk_size)) { -int64_t blk_size_aligned =pow2ceil (blk_size); -char *blk_size_str; - - blk_size_str =size_to_str (blk_size); -error_setg (errp,"Invalid SD card size: %s" , blk_size_str); -g_free (blk_size_str); - - blk_size_str =size_to_str (blk_size_aligned); - error_append_hint(errp, - "SD card size has to be a power of 2, e.g.%s.\n"
hw/sd/sd.c +0
-2-"You can resize disk images with" - " 'qemu-img resize <imagefile><new-size>'\n"
- "(note that this will lose data if you make
the"hw/sd/sd.c +16
-4-" image smaller than it currently is).\n" , - blk_size_str); -g_free (blk_size_str); - + blk_size =blk_getlength (sd->blk) - sd->boot_part_size *2 ; +if (blk_size >SDSC_MAX_CAPACITY ) { +if (sd_is_emmc (sd) && blk_size % (1 <<HWBLOCK_SHIFT ) !=0 ) { +int64_t blk_size_aligned = + ((blk_size >>HWBLOCK_SHIFT ) +1 ) <<HWBLOCK_SHIFT ; +sd_blk_size_error (sd, blk_size, blk_size_aligned, +"multiples of 512" , errp); +return ; + }else if (!sd_is_emmc (sd) && blk_size % (512 * KiB)) { +int64_t blk_size_aligned = ((blk_size >>19 ) +1 ) <<19 ; +sd_blk_size_error (sd, blk_size, blk_size_aligned, +"multiples of 512K" , errp); +return ; + } + }else if (blk_size >0 && !is_power_of_2 (blk_size)) { + sd_blk_size_error(sd, blk_size, pow2ceil(blk_size), "a powerof 2",
hw/sd/sd.c +4
-1+ errp); +return ; + }else if (blk_size <0 ) { +error_setg (errp,"eMMC image smaller than boot partitions" );return ; } --2.51.0
PATCH v3 2/6 hw/sd/sdcard: Allow user-instantiated eMMC
In reply to Jan KiszkaFrom: Jan Kiszka <[email protected]>
Enable user-instantiation so that PCI-attached eMMCs can be created for virt machines, for QA purposes for the eMMC model itself and for complex firmware/OS integrations using the upcoming RPMB partition support.
--- hw/sd/sd.c | 2 -- 1 file changed, 2 deletions(-)
hw/sd/sd.c +0 -2
@@ -2926,8 +2926,6 @@ static void emmc_class_init(ObjectClass *klass, const void *data) dc->desc ="eMMC" ; dc->realize = emmc_realize;device_class_set_props (dc, emmc_properties); -/* Reason: Soldered on board */ - dc->user_creatable = false; sc->proto = &sd_proto_emmc;
Signature · 1 line
2.51.0
PATCH v3 3/6 hw/sd/sdcard: Add basic support for RPMB partition
In reply to Jan KiszkaFrom: Jan Kiszka <[email protected]>
The Replay Protected Memory Block (RPMB) is available since eMMC 4.4 which has been obsoleted by 4.41. Therefore lift the provided EXT_CSD_REV to 5 (4.41) and provide the basic logic to implement basic support for it. This allows to set the authentication key, read the write counter and authenticated perform data read and write requests. Those aren't actually authenticated yet, support for that will be added later.
The RPMB image needs to be added to backing block images after potential boot partitions and before the user data. It's size is controlled by the rpmb-partition-size property.
Also missing in this version (and actually not only for RPMB bits) is persistence of registers that are supposed to survive power cycles. Most prominent are the write counters or the authentication key. This feature can be added later, e.g. by append a state structure to the backing block image.
--- hw/sd/sd.c | 207 +++++++++++++++++++++++++++++++++++++++-- hw/sd/sdmmc-internal.h | 21 +++++ hw/sd/trace-events | 2 + 3 files changed, 222 insertions(+), 8 deletions(-)
hw/sd/sd.c +199 -8
@@ -117,6 +117,20 @@ typedef struct SDProto { } cmd[SDMMC_CMD_MAX ], acmd[SDMMC_CMD_MAX ]; } SDProto; +#define RPMB_KEY_MAC_LEN 32 + +typedef struct { +uint8_t stuff_bytes[196 ]; +uint8_t key_mac[RPMB_KEY_MAC_LEN ]; +uint8_t data[256 ]; +uint8_t nonce[16 ]; +uint32_t write_counter; +uint16_t address; +uint16_t block_count; +uint16_t result; +uint16_t req_resp; +}RPMBDataFrame ; +struct SDState {DeviceState parent_obj;
@@ -140,6 +154,7 @@ struct SDState {uint8_t spec_version;uint64_t boot_part_size; +uint64_t rpmb_part_size;BlockBackend *blk;uint8_t boot_config;
@@ -172,6 +187,10 @@ struct SDState {uint32_t data_offset;size_t data_size;uint8_t data[512 ]; +RPMBDataFrame rpmb_result; +uint32_t rpmb_write_counter; +uint8_t rpmb_key[32 ]; +uint8_t rpmb_key_set;QEMUTimer *ocr_power_timer;uint8_t dat_lines;bool cmd_line;
@@ -506,7 +525,9 @@ static void emmc_set_ext_csd(SDState *sd, uint64_t size) sd->ext_csd[205 ] =0x46 ;/* Min read perf for 4bit@26Mhz */ sd->ext_csd[EXT_CSD_CARD_TYPE ] =0b11 ; sd->ext_csd[EXT_CSD_STRUCTURE ] =2 ; - sd->ext_csd[EXT_CSD_REV ] =3 ; + sd->ext_csd[EXT_CSD_REV ] =5 ; + sd->ext_csd[EXT_CSD_RPMB_MULT ] = sd->rpmb_part_size / (128 * KiB); + sd->ext_csd[EXT_CSD_PARTITION_SUPPORT ] =0b111 ;/* Mode segment (RW) */ sd->ext_csd[EXT_CSD_PART_CONFIG ] = sd->boot_config;
@@ -834,7 +855,8 @@ static uint32_t sd_blk_len(SDState *sd)/* * This requires a disk image that has two boot partitions inserted at the * beginning of it, followed by an RPMB partition. The size of the boot -* partitions is the "boot-partition-size" property. +* partitions is the "boot-partition-size" property, the one of the RPMB +* partition is 'rpmb-partition-size'. */ static uint32_t sd_part_offset (SDState *sd) {
@@ -848,11 +870,13 @@ static uint32_t sd_part_offset(SDState *sd) &EXT_CSD_PART_CONFIG_ACC_MASK ;switch (partition_access) {case EXT_CSD_PART_CONFIG_ACC_DEFAULT : -return sd->boot_part_size *2 ; +return sd->boot_part_size *2 + sd->rpmb_part_size;case EXT_CSD_PART_CONFIG_ACC_BOOT1 :return 0 ;case EXT_CSD_PART_CONFIG_ACC_BOOT2 :return sd->boot_part_size *1 ; +case EXT_CSD_PART_CONFIG_ACC_RPMB : +return sd->boot_part_size *2 ;default :g_assert_not_reached (); }
@@ -891,7 +915,7 @@ static void sd_reset(DeviceState *dev) } size = sect <<HWBLOCK_SHIFT ;if (sd_is_emmc (sd)) { - size -= sd->boot_part_size *2 ; + size -= sd->boot_part_size *2 + sd->rpmb_part_size; } sect =sd_addr_to_wpnum (size) +1 ;
@@ -979,6 +1003,34 @@ static const VMStateDescription sd_ocr_vmstate = { }, }; +static bool vmstate_needed_for_rpmb (void *opaque) +{ +SDState *sd = opaque; + +return sd->rpmb_part_size >0 ; +} + +static const VMStateDescription emmc_rpmb_vmstate = { + .name ="sd-card/ext_csd_modes-state" , + .version_id =1 , + .minimum_version_id =1 , + .needed = vmstate_needed_for_rpmb, + .fields = (const VMStateField []) { +VMSTATE_UINT8_ARRAY (rpmb_result.key_mac, SDState,RPMB_KEY_MAC_LEN ), +VMSTATE_UINT8_ARRAY (rpmb_result.data, SDState,256 ), +VMSTATE_UINT8_ARRAY (rpmb_result.nonce, SDState,16 ), +VMSTATE_UINT32 (rpmb_result.write_counter, SDState), +VMSTATE_UINT16 (rpmb_result.address, SDState), +VMSTATE_UINT16 (rpmb_result.block_count, SDState), +VMSTATE_UINT16 (rpmb_result.result, SDState), +VMSTATE_UINT16 (rpmb_result.req_resp, SDState), +VMSTATE_UINT32 (rpmb_write_counter, SDState), +VMSTATE_UINT8_ARRAY (rpmb_key, SDState,32 ), +VMSTATE_UINT8 (rpmb_key_set, SDState), +VMSTATE_END_OF_LIST () + }, +}; +static bool vmstate_needed_for_emmc (void *opaque) {SDState *sd = opaque;
@@ -1045,6 +1097,7 @@ static const VMStateDescription sd_vmstate = { .subsections = (const VMStateDescription * const []) { &sd_ocr_vmstate, &emmc_extcsd_vmstate, + &emmc_rpmb_vmstate,NULL }, };
@@ -1067,6 +1120,105 @@ static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) } } +static void emmc_rpmb_blk_read (SDState *sd,uint64_t addr,uint32_t len) +{ +uint16_t resp =be16_to_cpu (sd->rpmb_result.req_resp); +uint16_t result =be16_to_cpu (sd->rpmb_result.result); +unsigned int curr_block =0 ; + +if ((result & ~RPMB_RESULT_COUTER_EXPIRED ) ==RPMB_RESULT_OK && + resp ==RPMB_RESP (RPMB_REQ_AUTH_DATA_READ )) { + curr_block =be16_to_cpu (sd->rpmb_result.address); +if (sd->rpmb_result.block_count ==0 ) { + sd->rpmb_result.block_count =cpu_to_be16 (sd->multi_blk_cnt); + }else { + curr_block +=be16_to_cpu (sd->rpmb_result.block_count) - + sd->multi_blk_cnt; + } + addr = curr_block *256 +sd_part_offset (sd); +if (blk_pread (sd->blk, addr,256 , sd->rpmb_result.data,0 ) <0 ) { +fprintf (stderr,"sd_blk_read: read error on host side\n" ); +memset (sd->rpmb_result.data,0 ,sizeof (sd->rpmb_result.data)); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_READ_FAILURE | + (result &RPMB_RESULT_COUTER_EXPIRED )); + } + } +memcpy (sd->data, &sd->rpmb_result,sizeof (sd->rpmb_result)); + +trace_sdcard_rpmb_read_block (resp, curr_block, +be16_to_cpu (sd->rpmb_result.result)); +} + +static void emmc_rpmb_blk_write (SDState *sd,uint64_t addr,uint32_t len) +{ +RPMBDataFrame *frame = (RPMBDataFrame *)sd->data; +uint16_t req =be16_to_cpu (frame->req_resp); + +if (req ==RPMB_REQ_READ_RESULT ) { +/* just return the current result register */ + goto exit; + } +memset (&sd->rpmb_result,0 ,sizeof (sd->rpmb_result)); +memcpy (sd->rpmb_result.nonce, frame->nonce,sizeof (sd->rpmb_result.nonce)); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_OK ); + sd->rpmb_result.req_resp =cpu_to_be16 (RPMB_RESP (req)); + +if (!sd->rpmb_key_set && req !=RPMB_REQ_PROGRAM_AUTH_KEY ) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_NO_AUTH_KEY ); + goto exit; + } + +switch (req) { +case RPMB_REQ_PROGRAM_AUTH_KEY : +if (sd->rpmb_key_set) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_WRITE_FAILURE ); +break ; + } +memcpy (sd->rpmb_key, frame->key_mac,sizeof (sd->rpmb_key)); + sd->rpmb_key_set =1 ; +break ; +case RPMB_REQ_READ_WRITE_COUNTER : + sd->rpmb_result.write_counter =cpu_to_be32 (sd->rpmb_write_counter); +break ; +case RPMB_REQ_AUTH_DATA_WRITE : +/* We only support single-block writes so far */ +if (sd->multi_blk_cnt !=1 ) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_GENERAL_FAILURE ); +break ; + } +if (sd->rpmb_write_counter ==0xffffffff ) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_WRITE_FAILURE ); +break ; + } +if (be32_to_cpu (frame->write_counter) != sd->rpmb_write_counter) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_COUNTER_FAILURE ); +break ; + } + sd->rpmb_result.address = frame->address; + addr =be16_to_cpu (frame->address) *256 +sd_part_offset (sd); +if (blk_pwrite (sd->blk, addr,256 , frame->data,0 ) <0 ) { +fprintf (stderr,"sd_blk_write: write error on host side\n" ); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_WRITE_FAILURE ); + }else { + sd->rpmb_write_counter++; + } + sd->rpmb_result.write_counter =cpu_to_be32 (sd->rpmb_write_counter); +break ; +case RPMB_REQ_AUTH_DATA_READ : + sd->rpmb_result.address = frame->address; +break ; +default : +qemu_log_mask (LOG_UNIMP ,"RPMB request %d not implemented\n" , req); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_GENERAL_FAILURE ); +break ; + } +exit: +if (sd->rpmb_write_counter ==0xffffffff ) { + sd->rpmb_result.result |=cpu_to_be16 (RPMB_RESULT_COUTER_EXPIRED ); + } +trace_sdcard_rpmb_write_block (req,be16_to_cpu (sd->rpmb_result.result)); +} +static void sd_erase (SDState *sd) {uint64_t erase_start = sd->erase_start;
@@ -1180,6 +1332,19 @@ static void emmc_function_switch(SDState *sd, uint32_t arg)break ; } +if (index ==EXT_CSD_PART_CONFIG ) { +uint8_t part = b &EXT_CSD_PART_CONFIG_ACC_MASK ; + +if (((part ==EXT_CSD_PART_CONFIG_ACC_BOOT1 || + part ==EXT_CSD_PART_CONFIG_ACC_BOOT2 ) && !sd->boot_part_size) || + (part ==EXT_CSD_PART_CONFIG_ACC_RPMB && !sd->rpmb_part_size)) { +qemu_log_mask (LOG_GUEST_ERROR , +"MMC switching to illegal partition\n" ); + sd->card_status |=R_CSR_SWITCH_ERROR_MASK ; +return ; + } + } +trace_sdcard_ext_csd_update (index, sd->ext_csd[index], b); sd->ext_csd[index] = b; }
@@ -2378,6 +2543,7 @@ static bool sd_generic_read_byte(SDState *sd, uint8_t *value)static void sd_write_byte (SDState *sd,uint8_t value) { +unsigned int partition_access;int i;if (!sd->blk || !blk_is_inserted (sd->blk)) {
@@ -2427,7 +2593,13 @@ static void sd_write_byte(SDState *sd, uint8_t value)if (sd->data_offset >= sd->blk_len) {/* TODO: Check CRC before committing */ sd->state = sd_programming_state; -sd_blk_write (sd, sd->data_start, sd->data_offset); + partition_access = sd->ext_csd[EXT_CSD_PART_CONFIG ] + &EXT_CSD_PART_CONFIG_ACC_MASK ; +if (partition_access ==EXT_CSD_PART_CONFIG_ACC_RPMB ) { +emmc_rpmb_blk_write (sd, sd->data_start, sd->data_offset); + }else { +sd_blk_write (sd, sd->data_start, sd->data_offset); + } sd->blk_written++; sd->data_start += sd->blk_len; sd->data_offset =0 ;
@@ -2510,6 +2682,7 @@ static uint8_t sd_read_byte(SDState *sd) {/* TODO: Append CRCs */ const uint8_t dummy_byte =0x00 ; +unsigned int partition_access;uint8_t ret;uint32_t io_len;
@@ -2553,7 +2726,13 @@ static uint8_t sd_read_byte(SDState *sd) sd->data_start, io_len)) {return dummy_byte; } -sd_blk_read (sd, sd->data_start, io_len); + partition_access = sd->ext_csd[EXT_CSD_PART_CONFIG ] + &EXT_CSD_PART_CONFIG_ACC_MASK ; +if (partition_access ==EXT_CSD_PART_CONFIG_ACC_RPMB ) { +emmc_rpmb_blk_read (sd, sd->data_start, io_len); + }else { +sd_blk_read (sd, sd->data_start, io_len); + } } ret = sd->data[sd->data_offset ++];
@@ -2803,7 +2982,8 @@ static void sd_realize(DeviceState *dev, Error **errp)return ; } - blk_size =blk_getlength (sd->blk) - sd->boot_part_size *2 ; + blk_size =blk_getlength (sd->blk) - sd->boot_part_size *2 - + sd->rpmb_part_size;if (blk_size >SDSC_MAX_CAPACITY ) {if (sd_is_emmc (sd) && blk_size % (1 <<HWBLOCK_SHIFT ) !=0 ) { int64_t blk_size_aligned =
@@ -2842,13 +3022,23 @@ static void sd_realize(DeviceState *dev, Error **errp)"The boot partition size must be multiples of 128K" "and not larger than 32640K.\n"); } +if (sd->rpmb_part_size % (128 * KiB) || + sd->rpmb_part_size >128 *128 * KiB) { +char *size_str =size_to_str (sd->boot_part_size); + +error_setg (errp,"Invalid RPMB partition size: %s" , size_str); +g_free (size_str); +error_append_hint (errp, +"The RPMB partition size must be multiples of 128K" +"and not larger than 16384K.\n" ); + } }static void emmc_realize (DeviceState *dev,Error **errp) {SDState *sd =SDMMC_COMMON (dev); - sd->spec_version = SD_PHY_SPECv3_01_VERS;/* Actually v4.3 */ + sd->spec_version = SD_PHY_SPECv3_01_VERS;/* Actually v4.5 */ sd_realize (dev, errp); }
@@ -2865,6 +3055,7 @@ static const Property sd_properties[] = {static const Property emmc_properties[] = {DEFINE_PROP_UINT64 ("boot-partition-size" , SDState, boot_part_size,0 ),DEFINE_PROP_UINT8 ("boot-config" , SDState, boot_config,0x0 ), +DEFINE_PROP_UINT64 ("rpmb-partition-size" , SDState, rpmb_part_size,0 ), };static void sdmmc_common_class_init (ObjectClass *klass,const void *data)
hw/sd/sdmmc-internal.h +21 -0
@@ -118,9 +118,30 @@ DECLARE_OBJ_CHECKERS(SDState, SDCardClass, SDMMC_COMMON, TYPE_SDMMC_COMMON)#define EXT_CSD_PART_CONFIG_ACC_DEFAULT (0x0)#define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x1)#define EXT_CSD_PART_CONFIG_ACC_BOOT2 (0x2) +#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3)#define EXT_CSD_PART_CONFIG_EN_MASK (0x7 << 3)#define EXT_CSD_PART_CONFIG_EN_BOOT0 (0x1 << 3)#define EXT_CSD_PART_CONFIG_EN_USER (0x7 << 3) +#define RPMB_REQ_PROGRAM_AUTH_KEY (1) +#define RPMB_REQ_READ_WRITE_COUNTER (2) +#define RPMB_REQ_AUTH_DATA_WRITE (3) +#define RPMB_REQ_AUTH_DATA_READ (4) +#define RPMB_REQ_READ_RESULT (5) +#define RPMB_REQ_AUTH_CONFIG_WRITE (6) +#define RPMB_REQ_AUTH_CONFIG_READ (7) + +#define RPMB_RESP (__req__) ((__req__) << 8) + +#define RPMB_RESULT_OK (0) +#define RPMB_RESULT_GENERAL_FAILURE (1) +#define RPMB_RESULT_AUTH_FAILURE (2) +#define RPMB_RESULT_COUNTER_FAILURE (3) +#define RPMB_RESULT_ADDRESS_FAILURE (4) +#define RPMB_RESULT_WRITE_FAILURE (5) +#define RPMB_RESULT_READ_FAILURE (6) +#define RPMB_RESULT_NO_AUTH_KEY (7) +#define RPMB_RESULT_COUTER_EXPIRED (0x80) +#endif
hw/sd/trace-events +2 -0
@@ -59,6 +59,8 @@ sdcard_read_data(const char *proto, const char *cmd_desc, uint8_t cmd, uint32_t sdcard_set_voltage(uint16_t millivolts) "%u mV" sdcard_ext_csd_update(unsigned index, uint8_t oval, uint8_t nval) "index %u: 0x%02x -> 0x%02x" sdcard_switch(unsigned access, unsigned index, unsigned value, unsigned set) "SWITCH acc:%u idx:%u val:%u set:%u" +sdcard_rpmb_read_block(uint16_t resp, uint16_t read_addr, uint16_t result) "resp 0x%x read_addr 0x%x result 0x%x" +sdcard_rpmb_write_block(uint16_t req, uint16_t result) "req 0x%x result 0x%x" # pl181.c pl181_command_send(uint8_t cmd, uint32_t arg) "sending CMD%02d arg 0x%08" PRIx32
Signature · 1 line
2.51.0
PATCH v3 4/6 hw/sd/sdcard: Handle RPMB MAC field
In reply to Jan KiszkaFrom: Jan Kiszka <[email protected]>
Implement correct setting of the MAC field when passing RPMB frames back to the guest. Also check the MAC on authenticated write requests.
This depends on HMAC support for QCRYPTO_HASH_ALGO_SHA256 which is always available via glib - assert this, just to be safe.
--- hw/sd/sd.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
hw/sd/sd.c +81 -0
@@ -51,6 +51,7 @@#include "qemu/module.h" #include "sdmmc-internal.h" #include "trace.h" +#include "crypto/hmac.h" //#define DEBUG_SD 1
@@ -118,6 +119,7 @@ typedef struct SDProto { } SDProto;#define RPMB_KEY_MAC_LEN 32 +#define RPMB_HASH_LEN 284 typedef struct { uint8_t stuff_bytes[196];
@@ -1120,6 +1122,66 @@ static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) } } +static bool rpmb_calc_hmac (SDState *sd,RPMBDataFrame *frame, +unsigned int num_blocks,uint8_t *mac) +{ +size_t mac_len =RPMB_KEY_MAC_LEN ; +bool success = true; +Error *err =NULL ; +QCryptoHmac *hmac; +uint64_t addr; + + hmac =qcrypto_hmac_new (QCRYPTO_HASH_ALGO_SHA256 , sd->rpmb_key, +RPMB_KEY_MAC_LEN , &err); +if (!hmac) { +error_report_err (err); +return false; + } + +/* +* This implies a read request because we only support single-block write +* requests so far. +*/ +if (num_blocks >1 ) { +/* +* Unfortunately, the underlying crypto libraries do not allow us to +* migrate an active QCryptoHmac state. Therefore, we have to calculate +* the HMAC in one run. To avoid buffering a complete read sequence in +* SDState, reconstruct all frames except for the last one. +*/ +char *buf = (char *)sd->data; + +memcpy (buf, frame->data,RPMB_HASH_LEN ); + addr =be16_to_cpu (frame->address) *256 +sd_part_offset (sd); +do { +if (blk_pread (sd->blk, addr,256 , buf,0 ) <0 ) { +fprintf (stderr,"sd_blk_read: read error on host side\n" ); + success = false; +break ; + } +if (qcrypto_hmac_bytes (hmac, buf,RPMB_HASH_LEN ,NULL ,NULL , + &err) <0 ) { +error_report_err (err); + success = false; +break ; + } + addr +=256 ; + }while (--num_blocks >1 ); + } + +if (success && +qcrypto_hmac_bytes (hmac, (const char *)frame->data,RPMB_HASH_LEN , &mac, + &mac_len, &err) <0 ) { +error_report_err (err); + success = false; + } +assert (!success || mac_len ==RPMB_KEY_MAC_LEN ); + +qcrypto_hmac_free (hmac); + +return success; +} +static void emmc_rpmb_blk_read (SDState *sd,uint64_t addr,uint32_t len) {uint16_t resp =be16_to_cpu (sd->rpmb_result.req_resp);
@@ -1142,6 +1204,17 @@ static void emmc_rpmb_blk_read(SDState *sd, uint64_t addr, uint32_t len) sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_READ_FAILURE | (result &RPMB_RESULT_COUTER_EXPIRED )); } +if (sd->multi_blk_cnt ==1 && + !rpmb_calc_hmac (sd, &sd->rpmb_result, +be16_to_cpu (sd->rpmb_result.block_count), + sd->rpmb_result.key_mac)) { +memset (sd->rpmb_result.data,0 ,sizeof (sd->rpmb_result.data)); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_AUTH_FAILURE ); + } + }else if (!rpmb_calc_hmac (sd, &sd->rpmb_result,1 , + sd->rpmb_result.key_mac)) { +memset (sd->rpmb_result.data,0 ,sizeof (sd->rpmb_result.data)); + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_AUTH_FAILURE ); }memcpy (sd->data, &sd->rpmb_result,sizeof (sd->rpmb_result));
@@ -1153,6 +1226,7 @@ static void emmc_rpmb_blk_write(SDState *sd, uint64_t addr, uint32_t len) {RPMBDataFrame *frame = (RPMBDataFrame *)sd->data;uint16_t req =be16_to_cpu (frame->req_resp); +uint8_t mac[RPMB_KEY_MAC_LEN ];if (req ==RPMB_REQ_READ_RESULT ) {/* just return the current result register */
@@ -1190,6 +1264,11 @@ static void emmc_rpmb_blk_write(SDState *sd, uint64_t addr, uint32_t len) sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_WRITE_FAILURE );break ; } +if (!rpmb_calc_hmac (sd, frame,1 , mac) || +memcmp (frame->key_mac, mac,RPMB_KEY_MAC_LEN ) !=0 ) { + sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_AUTH_FAILURE ); +break ; + }if (be32_to_cpu (frame->write_counter) != sd->rpmb_write_counter) { sd->rpmb_result.result =cpu_to_be16 (RPMB_RESULT_COUNTER_FAILURE );break ;
@@ -3114,6 +3193,8 @@ static void emmc_class_init(ObjectClass *klass, const void *data)DeviceClass *dc =DEVICE_CLASS (klass);SDCardClass *sc =SDMMC_COMMON_CLASS (klass); +assert (qcrypto_hmac_supports (QCRYPTO_HASH_ALGO_SHA256 )); + dc->desc ="eMMC" ; dc->realize = emmc_realize;device_class_set_props (dc, emmc_properties);
Signature · 1 line
2.51.0
PATCH v3 5/6 scripts: Add helper script to generate eMMC block device images
In reply to Jan KiszkaFrom: Jan Kiszka <[email protected]>
As an eMMC block device image may consist of more than just the user data partition, provide a helper script that can compose the image from boot partitions, an RPMB partition and the user data image. The script also does the required size validation and/or rounding.
--- scripts/mkemmc.sh | 199 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100755 scripts/mkemmc.sh
scripts/mkemmc.sh new file +199 -0
@@ -0,0 +1,199 @@ +#!/bin/sh -e +# SPDX-License-Identifier: GPL-2.0-only +# +# Create eMMC block device image from boot, RPMB and user data images +# +# Copyright (c) Siemens, 2025 +# +# Authors: +# Jan Kiszka <[email protected]> +# +# This work is licensed under the terms of the GNU GPL version 2. +# See the COPYING file in the top-level directory. +# + +usage() { + echo "$0 [OPTIONS] USER_IMG[:SIZE] OUTPUT_IMG" + echo "" + echo "SIZE must be a power of 2 up to 2G and multiples of 512 byte from there on." + echo "If no SIZE is specified, the size of USER_ING will be used (rounded up)." + echo "" + echo "Supported options:" + echo " -b BOOT1_IMG[:SIZE] Add boot partitions. SIZE must be multiples of 128K. If" + echo " no SIZE is specified, the size of BOOT_IMG will be" + echo " used (rounded up). BOOT1_IMG will be stored in boot" + echo " partition 1, and a boot partition 2 of the same size" + echo " will be created as empty (all zeros) unless -B is" + echo " specified as well." + echo " -B BOOT2_IMG Fill boot partition 2 with BOOT2_IMG. Must be combined" + echo " with -b which is also defining the partition size." + echo " -r RPMB_IMG[:SIZE] Add RPMB partition. SIZE must be multiples of 128K. If" + echo " no SIZE is specified, the size of RPMB_IMG will be" + echo " used (rounded up)." + echo " -h, --help This help" + echo "" + echo "All SIZE parameters support the units K, M, G. If SIZE is smaller than the" + echo "associated image, it will be truncated in the output image." + exit "$1" +} + +process_size() { + name=$1 + image_file=$2 + alignment=$3 + image_arg=$4 + if [ "${image_arg#*:}" = "$image_arg" ]; then + if ! size=$(stat -L -c %s "$image_file" 2>/dev/null); then + echo "Missing $name image '$image_file'." >&2 + exit 1 + fi + if [ "$alignment" = 128 ]; then + size=$(( (size + 128 * 1024 - 1) & ~(128 * 1024 - 1) )) + elif [ $size -gt $((2 * 1024 * 1024 * 1024)) ]; then + size=$(( (size + 511) & ~511 )) + elif [ $(( size & (size - 1) )) -gt 0 ]; then + n=0 + while [ "$size" -gt 0 ]; do + size=$((size >> 1)) + n=$((n + 1)) + done + size=$((1 << n)) + fi + else + value="${image_arg#*:}" + if [ "${value%K}" != "$value" ]; then + size=${value%K} + multiplier=1024 + elif [ "${value%M}" != "$value" ]; then + size=${value%M} + multiplier=$((1024 * 1024)) + elif [ "${value%G}" != "$value" ]; then + size=${value%G} + multiplier=$((1024 * 1024 * 1024)) + else + size=$value + multiplier=1 + fi + if [ "$size" -eq "$size" ] 2>/dev/null; then + size=$((size * multiplier)) + else + echo "Invalid value '$value' specified for $image_file image size." >&2 + exit 1 + fi + if [ "$alignment" = 128 ]; then + if [ $(( size & (128 * 1024 - 1) )) -ne 0 ]; then + echo "The $name image size must be multiples of 128K." >&2 + exit 1 + fi + elif [ $size -gt $((2 * 1024 * 1024 * 1024)) ]; then + if [ $(( size & 511)) -ne 0 ]; then + echo "The $name image size must be multiples of 512 (if >2G)." >&2 + exit 1 + fi + elif [ $(( size & (size - 1) )) -gt 0 ]; then + echo "The $name image size must be power of 2 (up to 2G)." >&2 + exit 1 + fi + fi + echo $size +} + +userimg= +outimg= +bootimg1= +bootimg2=/dev/zero +bootsz=0 +rpmbimg= +rpmbsz=0 + +while [ $# -gt 0 ]; do + case "$1" in + -b) + shift + [ $# -ge 1 ] || usage 1 + bootimg1=${1%%:*} + bootsz=$(process_size boot "$bootimg1" 128 "$1") + shift + ;; + -B) + shift + [ $# -ge 1 ] || usage 1 + bootimg2=$1 + shift + ;; + -r) + shift + [ $# -ge 1 ] || usage 1 + rpmbimg=${1%%:*} + rpmbsz=$(process_size RPMB "$rpmbimg" 128 "$1") + shift + ;; + -h|--help) + usage 0 + ;; + *) + if [ -z "$userimg" ]; then + userimg=${1%%:*} + usersz=$(process_size user "$userimg" U "$1") + elif [ -z "$outimg" ]; then + outimg=$1 + else + usage 1 + fi + shift + ;; + esac +done + +[ -n "$outimg" ] || usage 1 + +if [ "$bootsz" -gt $((32640 * 1024)) ]; then + echo "Boot image size is larger than 32640K." >&2 + exit 1 +fi +if [ "$rpmbsz" -gt $((16384 * 1024)) ]; then + echo "RPMB image size is larger than 16384K." >&2 + exit 1 +fi + +echo "Creating eMMC image" + +truncate "$outimg" -s 0 +pos=0 + +if [ "$bootsz" -gt 0 ]; then + echo " Boot partition 1 and 2: $((bootsz / 1024))K each" + blocks=$(( bootsz / (128 * 1024) )) + dd if="$bootimg1" of="$outimg" conv=sparse bs=128K count=$blocks \ + status=none + dd if="$bootimg2" of="$outimg" conv=sparse bs=128K count=$blocks \ + seek=$blocks status=none + pos=$((2 * bootsz)) +fi + +if [ "$rpmbsz" -gt 0 ]; then + echo " RPMB partition: $((rpmbsz / 1024))K" + blocks=$(( rpmbsz / (128 * 1024) )) + dd if="$rpmbimg" of="$outimg" conv=sparse bs=128K count=$blocks \ + seek=$(( pos / (128 * 1024) )) status=none + pos=$((pos + rpmbsz)) +fi + +if [ "$usersz" -lt 1024 ]; then + echo " User data: $usersz bytes" +elif [ "$usersz" -lt $((1024 * 1024)) ]; then + echo " User data: $(( (usersz + 1023) / 1024 ))K ($usersz)" +elif [ "$usersz" -lt $((1024 * 1024 * 1024)) ]; then + echo " User data: $(( (usersz + 1048575) / 1048576))M ($usersz)" +else + echo " User data: $(( (usersz + 1073741823) / 1073741824))G ($usersz)" +fi +dd if="$userimg" of="$outimg" conv=sparse bs=128K seek=$(( pos / (128 * 1024) )) \ + count=$(( (usersz + 128 * 1024 - 1) / (128 * 1024) )) status=none +pos=$((pos + usersz)) +truncate "$outimg" -s $pos + +echo "" +echo "Instantiate by appending to the qemu command line:" +echo " -drive file=$outimg,if=none,format=raw,id=emmc-img" +echo " -device emmc,boot-partition-size=$bootsz,rpmb-partition-size=$rpmbsz,drive=emmc-img"
Signature · 1 line
2.51.0
PATCH v3 6/6 docs: Add eMMC device model description
In reply to Jan KiszkaFrom: Jan Kiszka <[email protected]>
--- docs/system/device-emulation.rst | 1 + docs/system/devices/emmc.rst | 52 ++++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 docs/system/devices/emmc.rst
docs/system/device-emulation.rst +1 -0
@@ -101,3 +101,4 @@ Emulated Devices devices/canokey.rst devices/usb-u2f.rst devices/igb.rst + devices/emmc.rst
docs/system/devices/emmc.rst new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
2.51.0
Re: [PATCH v3 6/6] docs: Add eMMC device model description
Quoted 59 lines · Jan Kiszka
From: Jan Kiszka <[email protected]>
Signed-off-by Jan Kiszka <[email protected]>--- docs/system/device-emulation.rst | 1 + docs/system/devices/emmc.rst | 52 ++++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 docs/system/devices/emmc.rstdocs/system/device-emulation.rst +1
-0@@ -101,3 +101,4 @@ Emulated Devices devices/canokey.rst devices/usb-u2f.rst devices/igb.rst + devices/emmc.rstdocs/system/devices/emmc.rst new file +35
-0@@ -0,0 +1,52 @@ +============== +eMMC Emulation +============== + +Besides SD card emulation, QEMU also offers an eMMC model as found on many +embedded boards. An eMMC, just like an SD card, is connected to the machine +via an SDHCI controller. + +Create eMMC Images +================== + +A recent eMMC consists of 4 partitions: 2 boot partitions, 1 Replay protected +Memory Block (RPMB), and the user data area. QEMU expects backing images for +the eMMC to contain those partitions concatenated in exactly that order. +However, the boot partitions as well as the RPMB might be absent if their sizes +are configured to zero. + +The eMMC specification defines alignment constraints for the partitions. The +two boot partitions must be of the same size. Furthermore, boot and RPMB +partitions must be multiples of 128 KB with a maximum of 32640 KB for each +boot partition and 16384K for the RPMB partition. + +The alignment constrain of the user data area depends on its size. Up to 2 +GByte, the size must be a power of 2. From 2 GByte onward, the size has to be +multiples of 512 byte. + +QEMU is enforcing those alignment rules before instantiating the device. +Therefore, the provided image has to strictly follow them as well. The helper +script `scripts/mkemmc.sh` can be used to create compliant images, with or +without pre-filled partitions. E.g., to create an eMMC image from a firmware +image and an OS image with an empty 2 MByte RPMB, use the following command: + +.. code-block:: console + + scripts/mkemmc.sh -b firmware.img -r /dev/zero:2MB os.img emmc.img
docs/system/devices/emmc.rst line 45
Quoted 10 lines
docs/system/devices/emmc.rst new file +10
-0+ +This will take care of rounding up the partition sizes to the next valid value +and will leave the RPMB and the second boot partition empty (zeroed). + +Adding eMMC Devices +=================== + +An eMMC is either automatically created by a machine model (e.g. Aspeed boards) +or can be user-created when using a PCI-attached SDHCI controller. To +instantiate the eMMC image form the example above while assuming that the
s/form/from/
docs/system/devices/emmc.rst line 52
Quoted 7 lines
docs/system/devices/emmc.rst new file +7
-0+firmware needs a boot partitions of 1 MB, use the following options: + +.. code-block:: console + + -drive file=emmc.img,if=none,format=raw,id=emmc-img + -device sdhci-pci + -device emmc,drive=emmc-img,boot-partition-size=1048576 rpmb-partition-size=2097152
Missing ',' before rpmb-partition-size?
Thanks,
Jan
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v3 6/6] docs: Add eMMC device model description
Quoted 73 lines · Jan Lübbe
Quoted 59 lines · Jan Kiszka
From: Jan Kiszka <[email protected]>
Signed-off-by Jan Kiszka <[email protected]>--- docs/system/device-emulation.rst | 1 + docs/system/devices/emmc.rst | 52 ++++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 docs/system/devices/emmc.rstdocs/system/device-emulation.rst +1
-0@@ -101,3 +101,4 @@ Emulated Devices devices/canokey.rst devices/usb-u2f.rst devices/igb.rst + devices/emmc.rstdocs/system/devices/emmc.rst new file +35
-0@@ -0,0 +1,52 @@ +============== +eMMC Emulation +============== + +Besides SD card emulation, QEMU also offers an eMMC model as found on many +embedded boards. An eMMC, just like an SD card, is connected to the machine +via an SDHCI controller. + +Create eMMC Images +================== + +A recent eMMC consists of 4 partitions: 2 boot partitions, 1 Replay protected +Memory Block (RPMB), and the user data area. QEMU expects backing images for +the eMMC to contain those partitions concatenated in exactly that order. +However, the boot partitions as well as the RPMB might be absent if their sizes +are configured to zero. + +The eMMC specification defines alignment constraints for the partitions. The +two boot partitions must be of the same size. Furthermore, boot and RPMB +partitions must be multiples of 128 KB with a maximum of 32640 KB for each +boot partition and 16384K for the RPMB partition. + +The alignment constrain of the user data area depends on its size. Up to 2 +GByte, the size must be a power of 2. From 2 GByte onward, the size has to be +multiples of 512 byte. + +QEMU is enforcing those alignment rules before instantiating the device. +Therefore, the provided image has to strictly follow them as well. The helper +script `scripts/mkemmc.sh` can be used to create compliant images, with or +without pre-filled partitions. E.g., to create an eMMC image from a firmware +image and an OS image with an empty 2 MByte RPMB, use the following command: + +.. code-block:: console + + scripts/mkemmc.sh -b firmware.img -r /dev/zero:2MB os.img emmc.imgdocs/system/devices/emmc.rst line 45
Quoted 10 lines
docs/system/devices/emmc.rst new file +10
-0+ +This will take care of rounding up the partition sizes to the next valid value +and will leave the RPMB and the second boot partition empty (zeroed). + +Adding eMMC Devices +=================== + +An eMMC is either automatically created by a machine model (e.g. Aspeed boards) +or can be user-created when using a PCI-attached SDHCI controller. To +instantiate the eMMC image form the example above while assuming that thes/form/from/
Quoted 10 lines
docs/system/devices/emmc.rst line 52
Quoted 7 lines
docs/system/devices/emmc.rst new file +7
-0+firmware needs a boot partitions of 1 MB, use the following options: + +.. code-block:: console + + -drive file=emmc.img,if=none,format=raw,id=emmc-img + -device sdhci-pci + -device emmc,drive=emmc-img,boot-partition-size=1048576 rpmb-partition-size=2097152Missing ',' before rpmb-partition-size?
Thanks, both fixed.
Jan
Signature · 2 lines
Siemens AG, Foundational Technologies Linux Expert Center
Re: [PATCH v3 6/6] docs: Add eMMC device model description
In reply to Jan KiszkaQuoted 3 lines · Jan Kiszka
From: Jan Kiszka <[email protected]>
Signed-off-by Jan Kiszka <[email protected]>
With typo fix:
Signature · 2 lines
Alex Bennée Virtualisation Tech Lead @ Linaro