x86/tsx: Improve handling of the tsx= kernel parameter
v3 cover x86/tsx: Improve handling of the tsx= kernel parameter
Parse the tsx= kernel parameter with early_param(), so it is not reported as unknown.
As a side note, it was not necessary to defer the handling of tsx=auto. Contrary to Pawan's claim, cpu_set_bug_bits() is called from setup_arch() via early_cpu_init() and early_identify_cpu() before parse_early_param(). But it is a nice cleanup, nevertheless, and I learned something about parsing the command line. Cf. the NAK here:
https://lore.kernel.org/all/20251009185134.fb4evjrk76rwxv37@desk/
Changes from v2:
* compile-time initialization with the configured default
* defer tsx=auto handling to tsx_init()
* add more detail to the commit message
Changes from v1:
* make tsx_ctrl_state local to tsx.c
* use early_param() instead of core_param()
Petr Tesarik (2):
x86/tsx: Make tsx_ctrl_state static
x86/tsx: Get the tsx= command line parameter with early_param()
arch/x86/kernel/cpu/cpu.h | 9 ------ arch/x86/kernel/cpu/tsx.c | 59 ++++++++++++++++++++++----------------- 2 files changed, 34 insertions(+), 34 deletions(-)
Signature · 1 line
2.51.0
PATCH v3 1/2 x86/tsx: Make tsx_ctrl_state static
Move all definitions related to tsx_ctrl_state to tsx.c. They are never referenced outside this file.
No functional change.
--- arch/x86/kernel/cpu/cpu.h | 9 --------- arch/x86/kernel/cpu/tsx.c | 9 ++++++++- 2 files changed, 8 insertions(+), 10 deletions(-)
arch/x86/kernel/cpu/cpu.h +0 -9
@@ -42,15 +42,6 @@ extern const struct cpu_dev *const __x86_cpu_dev_start[], *const __x86_cpu_dev_end[];#ifdef CONFIG_CPU_SUP_INTEL -enum tsx_ctrl_states { -TSX_CTRL_ENABLE , -TSX_CTRL_DISABLE , -TSX_CTRL_RTM_ALWAYS_ABORT , -TSX_CTRL_NOT_SUPPORTED , -}; - -extern __ro_after_init enum tsx_ctrl_states tsx_ctrl_state; -extern void __init tsx_init (void );void tsx_ap_init (void );void intel_unlock_cpuid_leafs (struct cpuinfo_x86 *c);
arch/x86/kernel/cpu/tsx.c +8 -1
@@ -19,7 +19,14 @@#undef pr_fmt#define pr_fmt (fmt) "tsx: " fmt -enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ; +enum tsx_ctrl_states { +TSX_CTRL_ENABLE , +TSX_CTRL_DISABLE , +TSX_CTRL_RTM_ALWAYS_ABORT , +TSX_CTRL_NOT_SUPPORTED , +}; + +static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ;static void tsx_disable (void ) {
Signature · 1 line
2.51.0
PATCH v3 2/2 x86/tsx: Get the tsx= command line parameter with early_param()
In reply to Petr TesarikUse early_param() to get the value of the tsx= command line parameter. It is an early parameter, because it must be parsed before tsx_init(), which is called long before kernel_init(), where normal parameters are parsed.
Although cmdline_find_option() from tsx_init() works fine, the option is later reported as unknown and passed to user space. The latter is not a real issue, but the former is confusing and makes people wonder if the tsx= parameter had any effect and double-check for typos unnecessarily.
The behavior changes slightly if "tsx" is given without any argument (which is invalid syntax). Prior to this patch, the kernel logged an error message and disabled TSX. With this patch, the kernel still issues a warning (Malformed early option 'tsx'), but TSX state is unchanged. The new behavior is consistent with other parameters, e.g. "tsx_async_abort".
--- arch/x86/kernel/cpu/tsx.c | 52 ++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 25 deletions(-)
arch/x86/kernel/cpu/tsx.c +27 -25
@@ -20,13 +20,17 @@#define pr_fmt (fmt) "tsx: " fmtenum tsx_ctrl_states { +TSX_CTRL_AUTO ,TSX_CTRL_ENABLE ,TSX_CTRL_DISABLE ,TSX_CTRL_RTM_ALWAYS_ABORT ,TSX_CTRL_NOT_SUPPORTED , }; -static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ; +static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init = +IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_AUTO ) ?TSX_CTRL_AUTO : +IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_OFF ) ?TSX_CTRL_DISABLE : +TSX_CTRL_ENABLE ;static void tsx_disable (void ) {
@@ -163,11 +167,28 @@ static void tsx_dev_mode_disable(void) } } -void __init tsx_init (void ) +static int __init tsx_parse_cmdline (char *str) { -char arg[5 ] = {}; -int ret; +if (!str) +return -EINVAL ; + +if (!strcmp (str,"on" )) { + tsx_ctrl_state =TSX_CTRL_ENABLE ; + }else if (!strcmp (str,"off" )) { + tsx_ctrl_state =TSX_CTRL_DISABLE ; + }else if (!strcmp (str,"auto" )) { + tsx_ctrl_state =TSX_CTRL_AUTO ; + }else { + tsx_ctrl_state =TSX_CTRL_DISABLE ; +pr_err ("invalid option, defaulting to off\n" ); + } + +return 0 ; +} +early_param ("tsx" , tsx_parse_cmdline); +void __init tsx_init (void ) +{tsx_dev_mode_disable ();/*
@@ -201,27 +222,8 @@ void __init tsx_init(void)return ; } - ret =cmdline_find_option (boot_command_line,"tsx" , arg,sizeof (arg)); -if (ret >=0 ) { -if (!strcmp (arg,"on" )) { - tsx_ctrl_state =TSX_CTRL_ENABLE ; - }else if (!strcmp (arg,"off" )) { - tsx_ctrl_state =TSX_CTRL_DISABLE ; - }else if (!strcmp (arg,"auto" )) { - tsx_ctrl_state =x86_get_tsx_auto_mode (); - }else { - tsx_ctrl_state =TSX_CTRL_DISABLE ; -pr_err ("invalid option, defaulting to off\n" ); - } - }else { -/* tsx= not provided */ -if (IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_AUTO )) - tsx_ctrl_state =x86_get_tsx_auto_mode (); -else if (IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_OFF )) - tsx_ctrl_state =TSX_CTRL_DISABLE ; -else - tsx_ctrl_state =TSX_CTRL_ENABLE ; - } +if (tsx_ctrl_state ==TSX_CTRL_AUTO ) + tsx_ctrl_state =x86_get_tsx_auto_mode ();if (tsx_ctrl_state ==TSX_CTRL_DISABLE ) {tsx_disable ();
Signature · 1 line
2.51.0
Re: [PATCH v3 2/2] x86/tsx: Get the tsx= command line parameter with early_param()
Quoted 30 lines · Petr Tesarik
Use
early_param()to get the value of the tsx= command line parameter. It is an early parameter, because it must be parsed beforetsx_init(), which is called long beforekernel_init(), where normal parameters are parsed.Although
cmdline_find_option()fromtsx_init()works fine, the option is later reported as unknown and passed to user space. The latter is not a real issue, but the former is confusing and makes people wonder if the tsx= parameter had any effect and double-check for typos unnecessarily.The behavior changes slightly if "tsx" is given without any argument (which is invalid syntax). Prior to this patch, the kernel logged an error message and disabled TSX. With this patch, the kernel still issues a warning (Malformed early option 'tsx'), but TSX state is unchanged. The new behavior is consistent with other parameters, e.g. "
tsx_async_abort".Suggested-by Pawan Gupta <[email protected]>Signed-off-by Petr Tesarik <[email protected]>--- arch/x86/kernel/cpu/tsx.c | 52 ++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 25 deletions(-)arch/x86/kernel/cpu/tsx.c +1
-0@@ -20,13 +20,17 @@#define pr_fmt (fmt) "tsx: " fmtenum tsx_ctrl_states { +TSX_CTRL_AUTO ,
arch/x86/kernel/cpu/tsx.c line 32
Quoted 10 lines
arch/x86/kernel/cpu/tsx.c +3
-1TSX_CTRL_ENABLE ,TSX_CTRL_DISABLE ,TSX_CTRL_RTM_ALWAYS_ABORT , TSX_CTRL_NOT_SUPPORTED, }; -static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ; +static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init = +IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_AUTO ) ?TSX_CTRL_AUTO : + IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE :
^
The extra space I had in the version I sent was intentional.
arch/x86/kernel/cpu/tsx.c line 33
Quoted 1 line
arch/x86/kernel/cpu/tsx.c +1
-0+TSX_CTRL_ENABLE ;
Also this can stay on the same line.
IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_AUTO) ? TSX_CTRL_AUTO : IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE : TSX_CTRL_ENABLE;
IMO, this is so much more easier to read.
Re: [PATCH v3 2/2] x86/tsx: Get the tsx= command line parameter with early_param()
Quoted 46 lines · On Wed, 22 Oct 2025 10:46:03 -0700 Pawan Gupta…
Quoted 30 lines · Petr Tesarik
Use
early_param()to get the value of the tsx= command line parameter. It is an early parameter, because it must be parsed beforetsx_init(), which is called long beforekernel_init(), where normal parameters are parsed.Although
cmdline_find_option()fromtsx_init()works fine, the option is later reported as unknown and passed to user space. The latter is not a real issue, but the former is confusing and makes people wonder if the tsx= parameter had any effect and double-check for typos unnecessarily.The behavior changes slightly if "tsx" is given without any argument (which is invalid syntax). Prior to this patch, the kernel logged an error message and disabled TSX. With this patch, the kernel still issues a warning (Malformed early option 'tsx'), but TSX state is unchanged. The new behavior is consistent with other parameters, e.g. "
tsx_async_abort".Suggested-by Pawan Gupta <[email protected]>Signed-off-by Petr Tesarik <[email protected]>--- arch/x86/kernel/cpu/tsx.c | 52 ++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 25 deletions(-)arch/x86/kernel/cpu/tsx.c +1
-0@@ -20,13 +20,17 @@#define pr_fmt (fmt) "tsx: " fmtenum tsx_ctrl_states { +TSX_CTRL_AUTO ,arch/x86/kernel/cpu/tsx.c line 32
Quoted 10 lines
arch/x86/kernel/cpu/tsx.c +3
-1TSX_CTRL_ENABLE ,TSX_CTRL_DISABLE ,TSX_CTRL_RTM_ALWAYS_ABORT , TSX_CTRL_NOT_SUPPORTED, }; -static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ; +static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init = +IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_AUTO ) ?TSX_CTRL_AUTO : + IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE :^
The extra space I had in the version I sent was intentional.
Quoted 8 lines
arch/x86/kernel/cpu/tsx.c line 33
Quoted 1 line
arch/x86/kernel/cpu/tsx.c +1
-0+TSX_CTRL_ENABLE ;Also this can stay on the same line.
IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_AUTO) ? TSX_CTRL_AUTO : IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE : TSX_CTRL_ENABLE;IMO, this is so much more easier to read.
Matter of taste if you ask me. I have no preference either way, so if you do have an opinion, let's write it your way.
Do I have to resubmit, or can an x86 maintainer adjust it when applying the patch?
Petr T
Re: [PATCH v3 2/2] x86/tsx: Get the tsx= command line parameter with early_param()
Quoted 53 lines · Petr Tesarik
Quoted 50 lines · On Wed, 22 Oct 2025 10:46:03 -0700 Pawan Gupta…
Quoted 30 lines · Petr Tesarik
Use
early_param()to get the value of the tsx= command line parameter. It is an early parameter, because it must be parsed beforetsx_init(), which is called long beforekernel_init(), where normal parameters are parsed.Although
cmdline_find_option()fromtsx_init()works fine, the option is later reported as unknown and passed to user space. The latter is not a real issue, but the former is confusing and makes people wonder if the tsx= parameter had any effect and double-check for typos unnecessarily.The behavior changes slightly if "tsx" is given without any argument (which is invalid syntax). Prior to this patch, the kernel logged an error message and disabled TSX. With this patch, the kernel still issues a warning (Malformed early option 'tsx'), but TSX state is unchanged. The new behavior is consistent with other parameters, e.g. "
tsx_async_abort".Suggested-by Pawan Gupta <[email protected]>Signed-off-by Petr Tesarik <[email protected]>--- arch/x86/kernel/cpu/tsx.c | 52 ++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 25 deletions(-)arch/x86/kernel/cpu/tsx.c +1
-0@@ -20,13 +20,17 @@#define pr_fmt (fmt) "tsx: " fmtenum tsx_ctrl_states { +TSX_CTRL_AUTO ,arch/x86/kernel/cpu/tsx.c line 32
Quoted 10 lines
arch/x86/kernel/cpu/tsx.c +3
-1TSX_CTRL_ENABLE ,TSX_CTRL_DISABLE ,TSX_CTRL_RTM_ALWAYS_ABORT , TSX_CTRL_NOT_SUPPORTED, }; -static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init =TSX_CTRL_NOT_SUPPORTED ; +static enum tsx_ctrl_states tsx_ctrl_state__ro_after_init = +IS_ENABLED (CONFIG_X86_INTEL_TSX_MODE_AUTO ) ?TSX_CTRL_AUTO : + IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE :^
The extra space I had in the version I sent was intentional.arch/x86/kernel/cpu/tsx.c line 33
Quoted 1 line
arch/x86/kernel/cpu/tsx.c +1
-0+TSX_CTRL_ENABLE ;Also this can stay on the same line.
Quoted 7 lines
Quoted 4 lines
IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_AUTO) ? TSX_CTRL_AUTO : IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF) ? TSX_CTRL_DISABLE : TSX_CTRL_ENABLE;IMO, this is so much more easier to read.
Matter of taste if you ask me. I have no preference either way, so if you do have an opinion, let's write it your way.
I would let the maintainers decide how they want it.
Quoted 2 lines
Do I have to resubmit, or can an x86 maintainer adjust it when applying the patch?
Borislav, Dave?