BPF controlled io_uring

This series introduces a way to override the standard io_uring_enter syscall execution with an extendible event loop, which can be controlled by BPF via new io_uring struct_ops or from within the kernel.

There are multiple use cases I want to cover with this:

- Syscall avoidance. Instead of returning to the userspace for CQE processing, a part of the logic can be moved into BPF to avoid excessive number of syscalls.

- Access to in-kernel io_uring resources. For example, there are registered buffers that can't be directly accessed by the userspace, however we can give BPF the ability to peek at them. It can be used to take a look at in-buffer app level headers to decide what to do with data next and issuing IO using it.

- Smarter request ordering and linking. Request links are pretty limited and inflexible as they can't pass information from one request to another. With BPF we can peek at CQEs and memory and compile a subsequent request.

- Feature semi-deprecation. It can be used to simplify handling of deprecated features by moving it into the callback out core io_uring. For example, it should be trivial to simulate IOSQE_IO_DRAIN. Another target could be request linking logic.

- It can serve as a base for custom algorithms and fine tuning. Often, it'd be impractical to introduce a generic feature because it's either niche or requires a lot of configuration. For example, there is support min-wait, however BPF can help to further fine tune it by doing it in multiple steps with different number of CQEs / timeouts. Another feature people were asking about is allowing to over queue SQEs but make the kernel to maintain a given QD.

- Smarter polling. Napi polling is performed only once per syscall and then it switches to waiting. We can do smarter and intermix polling with waiting using the hook.

It might need more specialised kfuncs in the future, but the core functionality is implemented with just two simple functions. One returns region memory, which gives BPF access to CQ/SQ/etc. And the second is for submitting requests. It's also given a structure as an argument, which is used to pass waiting parameters.

It showed good numbers in a test that sequentially executes N nop requests, where BPF was more than twice as fast than a 2-nop request link implementation.

v9: - Update mini_liburing
- Clean up the nop test, bound the CQ processing by a separate constant and not CQ_ENTRIES.
- Add helpers for sharing code b/w examples
- Enable IORING_SETUP_SQ_REWIND
- Use io_uring regions for parameter passing.

v8: - Remove an check that is "always true" to silence smatch
- Kill unused variables from selftests

v7: - Fix CQ overflow flushing deadlock and add a selftest

v6: - Fix inversed check on ejection leaving function pointer and
add a selftest checking that.
- Add spdx headers
- Remove sqe reassignment in selftests

v5: - Selftests are now using vmlinux.h
- Checking for unexpected loop return codes
- Remove KF_TRUSTED_ARGS (default)
- Squashed one of the patches, it's more sensible this way

v4: - Separated the event loop from the normal waiting path.
- Improved the selftest.

v3: - Removed most of utility kfuncs and replaced it with a single
helper returning the ring memory.
- Added KF_TRUSTED_ARGS to kfuncs
- Fix ifdef guarding
- Added a selftest
- Adjusted the waiting loop
- Reused the bpf lock section for task_work execution

Pavel Begunkov (10):
io_uring: introduce callback driven main loop io_uring/bpf-ops: implement loop_step with BPF struct_ops io_uring/bpf-ops: add kfunc helpers io_uring/bpf-ops: implement bpf ops registration
io_uring: update tools uapi headers io_uring/mini_liburing: add include guards io_uring/mini_liburing: add io_uring_register() selftests/io_uring: add BPF event loop example io_uring/selftests: check loop CQ overflow handling io_uring/selftests: test BPF [un]registration

 include/linux/io_uring_types.h                |  10 +
 io_uring/Kconfig                              |   5 +
 io_uring/Makefile                             |   3 +-
 io_uring/bpf-ops.c                            | 271 ++++++++++++++++++
 io_uring/bpf-ops.h                            |  28 ++
 io_uring/io_uring.c                           |  13 +
 io_uring/loop.c                               |  97 +++++++
 io_uring/loop.h                               |  27 ++
 io_uring/wait.h                               |   1 +
 tools/include/io_uring/mini_liburing.h        |  21 +-
 tools/include/uapi/linux/io_uring.h           |  96 ++++++-
 tools/testing/selftests/Makefile              |   3 +-
 tools/testing/selftests/io_uring/Makefile     | 162 +++++++++++
 .../testing/selftests/io_uring/common-defs.h  |  31 ++
 tools/testing/selftests/io_uring/helpers.h    |  95 ++++++
 .../selftests/io_uring/nops_loop.bpf.c        | 108 +++++++
 tools/testing/selftests/io_uring/nops_loop.c  |  89 ++++++
 .../testing/selftests/io_uring/overflow.bpf.c |  51 ++++
 tools/testing/selftests/io_uring/overflow.c   |  50 ++++
 tools/testing/selftests/io_uring/unreg.bpf.c  |  25 ++
 tools/testing/selftests/io_uring/unreg.c      |  92 ++++++
 21 files changed, 1270 insertions(+), 8 deletions(-)
 create mode 100644 io_uring/bpf-ops.c
 create mode 100644 io_uring/bpf-ops.h
 create mode 100644 io_uring/loop.c
 create mode 100644 io_uring/loop.h
 create mode 100644 tools/testing/selftests/io_uring/Makefile
 create mode 100644 tools/testing/selftests/io_uring/common-defs.h
 create mode 100644 tools/testing/selftests/io_uring/helpers.h
 create mode 100644 tools/testing/selftests/io_uring/nops_loop.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/nops_loop.c
 create mode 100644 tools/testing/selftests/io_uring/overflow.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/overflow.c
 create mode 100644 tools/testing/selftests/io_uring/unreg.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/unreg.c

2.53.0

The io_uring_enter() has a fixed order of execution: it submits requests, waits for completions, and returns to the user. Allow to optionally replace it with a custom loop driven by a callback called loop_step. The basic requirements to the callback is that it should be able to submit requests, wait for completions, parse them and repeat. Most of the communication including parameter passing can be implemented via shared memory.

The callback should return IOU_LOOP_CONTINUE to continue execution or IOU_LOOP_STOP to return to the user space. Note that the kernel may decide to prematurely terminate it as well, e.g. in case the process was signalled or killed.

The hook takes a structure with parameters. It can be used to ask the kernel to wait for CQEs by setting cq_wait_idx to the CQE index it wants to wait for. Spurious wake ups are possible and even likely, the callback is expected to handle it. There will be more parameters in the future like timeout.

It can be used with kernel callbacks, for example, as a slow path deprecation mechanism overwiting SQEs and emulating the wanted behaviour, however it's more useful together with BPF programs implemented in following patches.

Note that keeping it separately from the normal io_uring wait loop makes things much simpler and cleaner. It keeps it in one place instead of spreading a bunch of checks in different places including disabling the submission path. It holds the lock by default, which is a better fit for BPF synchronisation and the loop execution model. It nicely avoids existing quirks like forced wake ups on timeout request completion. And it should be easier to implement new features.

---
 include/linux/io_uring_types.h |  5 ++
 io_uring/Makefile              |  2 +-
 io_uring/io_uring.c            | 11 ++++
 io_uring/loop.c                | 97 ++++++++++++++++++++++++++++++++++
 io_uring/loop.h                | 27 ++++++++++
 io_uring/wait.h                |  1 +
 6 files changed, 142 insertions(+), 1 deletion(-)
 create mode 100644 io_uring/loop.c
 create mode 100644 io_uring/loop.h

index 3e4a82a6f817..cceac329fcfd 100644
@@ -41,6 +41,8 @@ enum io_uring_cmd_flags {
 	IO_URING_F_COMPAT		= (1 << 12),
 };
 
+struct iou_loop_params;
+
 struct io_wq_work_node {
 	struct io_wq_work_node *next;
 };

@@ -355,6 +357,9 @@ struct io_ring_ctx {
 		struct io_alloc_cache	rw_cache;
 		struct io_alloc_cache	cmd_cache;
 
+		int (*loop_step)(struct io_ring_ctx *ctx,
+				 struct iou_loop_params *);
+
 		/*
 		 * Any cancelable uring_cmd is added to this list in
 		 * ->uring_cmd() by io_uring_cmd_insert_cancelable()

index 931f9156132a..1c1f47de32a4 100644
@@ -14,7 +14,7 @@ obj-$(CONFIG_IO_URING)		+= io_uring.o opdef.o kbuf.o rsrc.o notif.o \
 					advise.o openclose.o statx.o timeout.o \
 					cancel.o waitid.o register.o \
 					truncate.o memmap.o alloc_cache.o \
-					query.o
+					query.o loop.o
 
 obj-$(CONFIG_IO_URING_ZCRX)	+= zcrx.o
 obj-$(CONFIG_IO_WQ)		+= io-wq.o

index 1e627b7a2f3a..0c8bb4e8480a 100644
@@ -95,6 +95,7 @@
 #include "eventfd.h"
 #include "wait.h"
 #include "bpf_filter.h"
+#include "loop.h"
 
 #define SQE_COMMON_FLAGS (IOSQE_FIXED_FILE | IOSQE_IO_LINK | \
 			  IOSQE_IO_HARDLINK | IOSQE_ASYNC)

@@ -589,6 +590,11 @@ void io_cqring_do_overflow_flush(struct io_ring_ctx *ctx)
 	mutex_unlock(&ctx->uring_lock);
 }
 
+void io_cqring_overflow_flush_locked(struct io_ring_ctx *ctx)
+{
+	__io_cqring_overflow_flush(ctx, false);
+}
+
 /* must to be called somewhat shortly after putting a request */
 static inline void io_put_task(struct io_kiocb *req)
 {

@@ -2582,6 +2588,11 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 	if (unlikely(smp_load_acquire(&ctx->flags) & IORING_SETUP_R_DISABLED))
 		goto out;
 
+	if (io_has_loop_ops(ctx)) {
+		ret = io_run_loop(ctx);
+		goto out;
+	}
+
 	/*
 	 * For SQ polling, the thread will do all submissions and completions.
 	 * Just return the requested submit count, and wake the thread if

new file mode 100644
index 000000000000..d7718b9ce61e
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef IOU_LOOP_H
+#define IOU_LOOP_H
+
+#include <linux/io_uring_types.h>
+
+struct iou_loop_params {
+	/*
+	 * The CQE index to wait for. Only serves as a hint and can still be
+	 * woken up earlier.
+	 */
+	__u32			cq_wait_idx;
+};
+
+enum {
+	IOU_LOOP_CONTINUE = 0,
+	IOU_LOOP_STOP,
+};
+
+static inline bool io_has_loop_ops(struct io_ring_ctx *ctx)
+{
+	return data_race(ctx->loop_step);
+}
+
+int io_run_loop(struct io_ring_ctx *ctx);
+
+#endif

index 5e236f74e1af..037e512dd80c 100644
@@ -25,6 +25,7 @@ int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, u32 flags,
 		   struct ext_arg *ext_arg);
 int io_run_task_work_sig(struct io_ring_ctx *ctx);
 void io_cqring_do_overflow_flush(struct io_ring_ctx *ctx);
+void io_cqring_overflow_flush_locked(struct io_ring_ctx *ctx);
 
 static inline unsigned int __io_cqring_events(struct io_ring_ctx *ctx)
 {

2.53.0

Introduce io_uring BPF struct ops implementing the loop_step callback, which will allow BPF to overwrite the default io_uring event loop logic.

The callback takes an io_uring context, the main role of which is to be passed to io_uring kfuncs. The other argument is a struct iou_loop_params, which BPF can use to request CQ waiting and communicate other parameters. See the event loop description in the previous patch for more details.

---
 io_uring/Kconfig    |   5 ++
 io_uring/Makefile   |   1 +
 io_uring/bpf-ops.c  | 127 ++++++++++++++++++++++++++++++++++++++++++++
 io_uring/bpf-ops.h  |  14 +++++
 io_uring/io_uring.c |   1 +
 5 files changed, 148 insertions(+)
 create mode 100644 io_uring/bpf-ops.c
 create mode 100644 io_uring/bpf-ops.h

index a7ae23cf1035..a283d9e53787 100644
@@ -14,3 +14,8 @@ config IO_URING_BPF
 	def_bool y
 	depends on BPF
 	depends on NET
+
+config IO_URING_BPF_OPS
+	def_bool y
+	depends on IO_URING
+	depends on BPF_SYSCALL && BPF_JIT && DEBUG_INFO_BTF

index 1c1f47de32a4..c54e328d1410 100644
@@ -25,3 +25,4 @@ obj-$(CONFIG_NET) += net.o cmd_net.o
 obj-$(CONFIG_PROC_FS) += fdinfo.o
 obj-$(CONFIG_IO_URING_MOCK_FILE) += mock_file.o
 obj-$(CONFIG_IO_URING_BPF) += bpf_filter.o
+obj-$(CONFIG_IO_URING_BPF_OPS) += bpf-ops.o

new file mode 100644
index 000000000000..e8a08ae2df0a
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef IOU_BPF_OPS_H
+#define IOU_BPF_OPS_H
+
+#include <linux/io_uring_types.h>
+
+struct io_uring_bpf_ops {
+	int (*loop_step)(struct io_ring_ctx *ctx, struct iou_loop_params *lp);
+
+	__u32 ring_fd;
+	void *priv;
+};
+
+#endif /* IOU_BPF_OPS_H */

index 0c8bb4e8480a..548ea5a080a0 100644
@@ -87,6 +87,7 @@
 #include "msg_ring.h"
 #include "memmap.h"
 #include "zcrx.h"
+#include "bpf-ops.h"
 
 #include "timeout.h"
 #include "poll.h"

2.53.0

Add two kfuncs that should cover most of the needs:

1. bpf_io_uring_submit_sqes(), which allows to submit io_uring requests. It mirrors the normal user space submission path and follows all related io_uring_enter(2) rules. i.e. SQEs are taken from the SQ according to head/tail values. In case of IORING_SETUP_SQ_REWIND, it'll submit first N entries.

2. bpf_io_uring_get_region() returns a pointer to the specified region, where io_uring regions are kernel-userspace shared chunks of memory. It takes the size as an argument, which should be a load time constant. There are 3 types of regions:
- IOU_REGION_SQ returns the submission queue.
- IOU_REGION_CQ stores the CQ, SQ/CQ headers and the sqarray. In other words, it gives same memory that would normally be mmap'ed with IORING_FEAT_SINGLE_MMAP enabled IORING_OFF_SQ_RING.
- IOU_REGION_MEM represents the memory / parameter region. It can be used to store request indirect parameters and for kernel - user communication.

It intentionally provides a thin but flexible API and expects BPF programs to implement CQ/SQ header parsing, CQ walking, etc. That mirrors how the normal user space works with rings and should help to minimise kernel / kfunc helpers changes while introducing new generic io_uring features.

---
 io_uring/bpf-ops.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
 io_uring/bpf-ops.h |  6 +++++
 2 files changed, 61 insertions(+)

index 975db5a78188..17518f4ecca9 100644
@@ -5,11 +5,58 @@
 
 #include "io_uring.h"
 #include "register.h"
+#include "memmap.h"
 #include "bpf-ops.h"
 #include "loop.h"
 
 static const struct btf_type *loop_params_type;
 
+__bpf_kfunc_start_defs();
+
+__bpf_kfunc int bpf_io_uring_submit_sqes(struct io_ring_ctx *ctx, u32 nr)
+{
+	return io_submit_sqes(ctx, nr);
+}
+
+__bpf_kfunc
+__u8 *bpf_io_uring_get_region(struct io_ring_ctx *ctx, __u32 region_id,
+			      const size_t rdwr_buf_size)
+{
+	struct io_mapped_region *r;
+
+	lockdep_assert_held(&ctx->uring_lock);
+
+	switch (region_id) {
+	case IOU_REGION_MEM:
+		r = &ctx->param_region;
+		break;
+	case IOU_REGION_CQ:
+		r = &ctx->ring_region;
+		break;
+	case IOU_REGION_SQ:
+		r = &ctx->sq_region;
+		break;
+	default:
+		return NULL;
+	}
+
+	if (unlikely(rdwr_buf_size > io_region_size(r)))
+		return NULL;
+	return io_region_get_ptr(r);
+}
+
+__bpf_kfunc_end_defs();
+
+BTF_KFUNCS_START(io_uring_kfunc_set)
+BTF_ID_FLAGS(func, bpf_io_uring_submit_sqes, KF_SLEEPABLE);
+BTF_ID_FLAGS(func, bpf_io_uring_get_region, KF_RET_NULL);
+BTF_KFUNCS_END(io_uring_kfunc_set)
+
+static const struct btf_kfunc_id_set bpf_io_uring_kfunc_set = {
+	.owner = THIS_MODULE,
+	.set = &io_uring_kfunc_set,
+};
+
 static int io_bpf_ops__loop_step(struct io_ring_ctx *ctx,
 				 struct iou_loop_params *lp)
 {

@@ -68,12 +115,20 @@ io_lookup_struct_type(struct btf *btf, const char *name)
 
 static int bpf_io_init(struct btf *btf)
 {
+	int ret;
+
 	loop_params_type = io_lookup_struct_type(btf, "iou_loop_params");
 	if (!loop_params_type) {
 		pr_err("io_uring: Failed to locate iou_loop_params\n");
 		return -EINVAL;
 	}
 
+	ret = register_btf_kfunc_id_set(BPF_PROG_TYPE_STRUCT_OPS,
+					&bpf_io_uring_kfunc_set);
+	if (ret) {
+		pr_err("io_uring: Failed to register kfuncs (%d)\n", ret);
+		return ret;
+	}
 	return 0;
 }
 

index e8a08ae2df0a..b9e589ad519a 100644
@@ -4,6 +4,12 @@
 
 #include <linux/io_uring_types.h>
 
+enum {
+	IOU_REGION_MEM,
+	IOU_REGION_CQ,
+	IOU_REGION_SQ,
+};
+
 struct io_uring_bpf_ops {
 	int (*loop_step)(struct io_ring_ctx *ctx, struct iou_loop_params *lp);
 

2.53.0

Implement BPF struct ops registration. It's registered off the BPF path, and can be removed by BPF as well as io_uring. To protect it, introduce a global lock synchronising registration. ctx->uring_lock can be nested under it. ctx->bpf_ops is write protected by both locks and so it's safe to read it under either of them.

---
 include/linux/io_uring_types.h |  5 ++
 io_uring/bpf-ops.c             | 91 +++++++++++++++++++++++++++++++++-
 io_uring/bpf-ops.h             |  8 +++
 io_uring/io_uring.c            |  1 +
 4 files changed, 104 insertions(+), 1 deletion(-)

index cceac329fcfd..976d85f82f86 100644
@@ -8,6 +8,9 @@
 #include <linux/llist.h>
 #include <uapi/linux/io_uring.h>
 
+struct iou_loop_params;
+struct io_uring_bpf_ops;
+
 enum {
 	/*
 	 * A hint to not wake right away but delay until there are enough of

@@ -481,6 +484,8 @@ struct io_ring_ctx {
 	DECLARE_HASHTABLE(napi_ht, 4);
 #endif
 
+	struct io_uring_bpf_ops		*bpf_ops;
+
 	/*
 	 * Protection for resize vs mmap races - both the mmap and resize
 	 * side will need to grab this lock, to prevent either side from

index b9e589ad519a..b39b3fd3acda 100644
@@ -17,4 +17,12 @@ struct io_uring_bpf_ops {
 	void *priv;
 };
 
+#ifdef CONFIG_IO_URING_BPF_OPS
+void io_unregister_bpf_ops(struct io_ring_ctx *ctx);
+#else
+static inline void io_unregister_bpf_ops(struct io_ring_ctx *ctx)
+{
+}
+#endif
+
 #endif /* IOU_BPF_OPS_H */

index 548ea5a080a0..b154dac396d3 100644
@@ -2154,6 +2154,7 @@ static __cold void io_req_caches_free(struct io_ring_ctx *ctx)
 
 static __cold void io_ring_ctx_free(struct io_ring_ctx *ctx)
 {
+	io_unregister_bpf_ops(ctx);
 	io_sq_thread_finish(ctx);
 
 	mutex_lock(&ctx->uring_lock);

2.53.0

Update the tools/ io_uring.h uapi header to include the region API and new registration opcodes.

---
 tools/include/uapi/linux/io_uring.h | 96 ++++++++++++++++++++++++++++-
 1 file changed, 95 insertions(+), 1 deletion(-)

index f1c16f817742..d1b649caed48 100644
@@ -198,6 +198,33 @@ enum {
  */
 #define IORING_SETUP_NO_SQARRAY		(1U << 16)
 
+/* Use hybrid poll in iopoll process */
+#define IORING_SETUP_HYBRID_IOPOLL	(1U << 17)
+
+/*
+ * Allow both 16b and 32b CQEs. If a 32b CQE is posted, it will have
+ * IORING_CQE_F_32 set in cqe->flags.
+ */
+#define IORING_SETUP_CQE_MIXED		(1U << 18)
+
+/*
+ * Allow both 64b and 128b SQEs. If a 128b SQE is posted, it will have
+ * a 128b opcode.
+ */
+#define IORING_SETUP_SQE_MIXED		(1U << 19)
+
+/*
+ * When set, io_uring ignores SQ head and tail and fetches SQEs to submit
+ * starting from index 0 instead from the index stored in the head pointer.
+ * IOW, the user should place all SQE at the beginning of the SQ memory
+ * before issuing a submission syscall.
+ *
+ * It requires IORING_SETUP_NO_SQARRAY and is incompatible with
+ * IORING_SETUP_SQPOLL. The user must also never change the SQ head and tail
+ * values and keep it set to 0. Any other value is undefined behaviour.
+ */
+#define IORING_SETUP_SQ_REWIND		(1U << 20)
+
 enum io_uring_op {
 	IORING_OP_NOP,
 	IORING_OP_READV,

@@ -253,7 +280,17 @@ enum io_uring_op {
 	IORING_OP_FUTEX_WAIT,
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
-
+	IORING_OP_FIXED_FD_INSTALL,
+	IORING_OP_FTRUNCATE,
+	IORING_OP_BIND,
+	IORING_OP_LISTEN,
+	IORING_OP_RECV_ZC,
+	IORING_OP_EPOLL_WAIT,
+	IORING_OP_READV_FIXED,
+	IORING_OP_WRITEV_FIXED,
+	IORING_OP_PIPE,
+	IORING_OP_NOP128,
+	IORING_OP_URING_CMD128,
 	/* this goes last, obviously */
 	IORING_OP_LAST,
 };

@@ -558,6 +595,38 @@ enum {
 	/* register a range of fixed file slots for automatic slot allocation */
 	IORING_REGISTER_FILE_ALLOC_RANGE	= 25,
 
+	/* return status information for a buffer group */
+	IORING_REGISTER_PBUF_STATUS		= 26,
+
+	/* set/clear busy poll settings */
+	IORING_REGISTER_NAPI			= 27,
+	IORING_UNREGISTER_NAPI			= 28,
+
+	IORING_REGISTER_CLOCK			= 29,
+
+	/* clone registered buffers from source ring to current ring */
+	IORING_REGISTER_CLONE_BUFFERS		= 30,
+
+	/* send MSG_RING without having a ring */
+	IORING_REGISTER_SEND_MSG_RING		= 31,
+
+	/* register a netdev hw rx queue for zerocopy */
+	IORING_REGISTER_ZCRX_IFQ		= 32,
+
+	/* resize CQ ring */
+	IORING_REGISTER_RESIZE_RINGS		= 33,
+
+	IORING_REGISTER_MEM_REGION		= 34,
+
+	/* query various aspects of io_uring, see linux/io_uring/query.h */
+	IORING_REGISTER_QUERY			= 35,
+
+	/* auxiliary zcrx configuration, see enum zcrx_ctrl_op */
+	IORING_REGISTER_ZCRX_CTRL		= 36,
+
+	/* register bpf filtering programs */
+	IORING_REGISTER_BPF_FILTER		= 37,
+
 	/* this goes last */
 	IORING_REGISTER_LAST,
 

@@ -578,6 +647,31 @@ struct io_uring_files_update {
 	__aligned_u64 /* __s32 * */ fds;
 };
 
+enum {
+	/* initialise with user provided memory pointed by user_addr */
+	IORING_MEM_REGION_TYPE_USER		= 1,
+};
+
+struct io_uring_region_desc {
+	__u64 user_addr;
+	__u64 size;
+	__u32 flags;
+	__u32 id;
+	__u64 mmap_offset;
+	__u64 __resv[4];
+};
+
+enum {
+	/* expose the region as registered wait arguments */
+	IORING_MEM_REGION_REG_WAIT_ARG		= 1,
+};
+
+struct io_uring_mem_region_reg {
+	__u64 region_uptr; /* struct io_uring_region_desc * */
+	__u64 flags;
+	__u64 __resv[2];
+};
+
 /*
  * Register a fully sparse file space, rather than pass in an array of all
  * -1 file descriptors.

2.53.0

Add include guards, it makes it easier to write tests with multiple headers.

---
 tools/include/io_uring/mini_liburing.h | 5 +++++
 1 file changed, 5 insertions(+)

index 44be4446feda..81513b82433a 100644
@@ -1,5 +1,8 @@
 /* SPDX-License-Identifier: MIT */
 
+#ifndef IOU_TOOLS_MINI_LIBURING_H
+#define IOU_TOOLS_MINI_LIBURING_H
+
 #include <linux/io_uring.h>
 #include <sys/mman.h>
 #include <sys/syscall.h>

@@ -309,3 +312,5 @@ static inline void io_uring_cqe_seen(struct io_uring *ring)
 	*(&ring->cq)->khead += 1;
 	write_barrier();
 }
+
+#endif /* IOU_TOOLS_MINI_LIBURING_H */

2.53.0

Add a helper for io_uring registration syscall, which will later be used for region creation. Keep it generic, it's good enough for now. Later it can be turned into a separate region API, but I'd rather have liburing introducing it first and copy from there, than the other way around.

---
 tools/include/io_uring/mini_liburing.h | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

index 81513b82433a..ee75cfc24d84 100644
@@ -70,6 +70,15 @@ struct io_uring {
 #define write_barrier()	__sync_synchronize()
 #endif
 
+static inline int io_uring_register(unsigned int fd, unsigned int opcode,
+				    const void *arg, unsigned int nr_args)
+{
+	int ret;
+
+	ret = syscall(__NR_io_uring_register, fd, opcode, arg, nr_args);
+	return (ret < 0) ? -errno : ret;
+}
+
 static inline int io_uring_mmap(int fd, struct io_uring_params *p,
 				struct io_uring_sq *sq, struct io_uring_cq *cq)
 {

@@ -280,11 +289,8 @@ static inline int io_uring_register_buffers(struct io_uring *ring,
 					    const struct iovec *iovecs,
 					    unsigned int nr_iovecs)
 {
-	int ret;
-
-	ret = syscall(__NR_io_uring_register, ring->ring_fd,
-		      IORING_REGISTER_BUFFERS, iovecs, nr_iovecs);
-	return (ret < 0) ? -errno : ret;
+	return io_uring_register(ring->ring_fd, IORING_REGISTER_BUFFERS,
+				 iovecs, nr_iovecs);
 }
 
 static inline void io_uring_prep_send(struct io_uring_sqe *sqe, int sockfd,

2.53.0

Add simple io_uring BPF selftests, which emulates a typical event loop but with NOP requests. It maintains a given QD, submits requests and reaps completions until it processes a pre-determined number of requests.

---
 tools/testing/selftests/Makefile              |   3 +-
 tools/testing/selftests/io_uring/Makefile     | 162 ++++++++++++++++++
 .../testing/selftests/io_uring/common-defs.h  |  27 +++
 tools/testing/selftests/io_uring/helpers.h    |  95 ++++++++++
 .../selftests/io_uring/nops_loop.bpf.c        | 108 ++++++++++++
 tools/testing/selftests/io_uring/nops_loop.c  |  89 ++++++++++
 6 files changed, 483 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/io_uring/Makefile
 create mode 100644 tools/testing/selftests/io_uring/common-defs.h
 create mode 100644 tools/testing/selftests/io_uring/helpers.h
 create mode 100644 tools/testing/selftests/io_uring/nops_loop.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/nops_loop.c

index 450f13ba4cca..f618efaaf684 100644
@@ -131,6 +131,7 @@ TARGETS += vfio
 TARGETS += x86
 TARGETS += x86/bugs
 TARGETS += zram
+TARGETS += io_uring
 #Please keep the TARGETS list alphabetically sorted
 # Run "make quicktest=1 run_tests" or
 # "make quicktest=1 kselftest" from top level Makefile

@@ -148,7 +149,7 @@ endif
 # User can optionally provide a TARGETS skiplist. By default we skip
 # targets using BPF since it has cutting edge build time dependencies
 # which require more effort to install.
-SKIP_TARGETS ?= bpf sched_ext
+SKIP_TARGETS ?= bpf sched_ext io_uring
 ifneq ($(SKIP_TARGETS),)
 	TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
 	override TARGETS := $(TMP)

new file mode 100644
index 000000000000..948453c90375
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef IOU_TOOLS_COMMON_DEFS_H
+#define IOU_TOOLS_COMMON_DEFS_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+
+struct ring_info {
+	unsigned	cq_hdr_offset;
+	unsigned	sq_hdr_offset;
+	unsigned	cqes_offset;
+	unsigned	sq_entries;
+	unsigned	cq_entries;
+
+	void		*region_uaddr;
+	unsigned	region_size;
+};
+
+struct nops_state {
+	unsigned	stat_nr_cqes;
+	unsigned	stat_nr_sqes;
+	int		result;
+	int		reqs_inflight;
+	int		reqs_left;
+};
+
+#endif /* IOU_TOOLS_COMMON_DEFS_H */

2.53.0

Make sure that CQ overflowing works well with loop execution. It adds a BPF program that first submits enough requests to trigger overflows and then empties the CQ.

---
 tools/testing/selftests/io_uring/Makefile     |  2 +-
 .../testing/selftests/io_uring/overflow.bpf.c | 51 +++++++++++++++++++
 tools/testing/selftests/io_uring/overflow.c   | 50 ++++++++++++++++++
 3 files changed, 102 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/io_uring/overflow.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/overflow.c

index 5b9518140f4c..77df197449ef 100644
@@ -3,7 +3,7 @@ include ../../../build/Build.include
 include ../../../scripts/Makefile.arch
 include ../../../scripts/Makefile.include
 
-TEST_GEN_PROGS := nops_loop
+TEST_GEN_PROGS := nops_loop overflow
 
 # override lib.mk's default rules
 OVERRIDE_TARGETS := 1

2.53.0

Make sure BPF registration and unregistration leave io_uring in the right state.

---
 tools/testing/selftests/io_uring/Makefile     |  2 +-
 .../testing/selftests/io_uring/common-defs.h  |  4 +
 tools/testing/selftests/io_uring/unreg.bpf.c  | 25 +++++
 tools/testing/selftests/io_uring/unreg.c      | 92 +++++++++++++++++++
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/io_uring/unreg.bpf.c
 create mode 100644 tools/testing/selftests/io_uring/unreg.c

index 77df197449ef..37f50acdba37 100644
@@ -3,7 +3,7 @@ include ../../../build/Build.include
 include ../../../scripts/Makefile.arch
 include ../../../scripts/Makefile.include
 
-TEST_GEN_PROGS := nops_loop overflow
+TEST_GEN_PROGS := nops_loop overflow unreg
 
 # override lib.mk's default rules
 OVERRIDE_TARGETS := 1

index 948453c90375..9a44e0687436 100644
@@ -24,4 +24,8 @@ struct nops_state {
 	int		reqs_left;
 };
 
+struct unreg_state {
+	unsigned	times_invoked;
+};
+
 #endif /* IOU_TOOLS_COMMON_DEFS_H */

new file mode 100644
index 000000000000..e872915b09dd
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/types.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "vmlinux.h"
+#include "common-defs.h"
+
+char LICENSE[] SEC("license") = "Dual BSD/GPL";
+
+SEC("struct_ops.s/unreg_loop_step")
+int BPF_PROG(unreg_loop_step, struct io_ring_ctx *ring,
+			      struct iou_loop_params *ls)
+{
+	struct unreg_state *us;
+
+	us = (void *)bpf_io_uring_get_region(ring, IOU_REGION_MEM, sizeof(*us));
+	if (us)
+		us->times_invoked++;
+	return IOU_LOOP_STOP;
+}
+
+SEC(".struct_ops.link")
+struct io_uring_bpf_ops unreg_ops = {
+	.loop_step = (void *)unreg_loop_step,
+};

2.53.0