MPTCP KTLS support
Subsystems (5)
Geliang Tang
reviewerv15 cover MPTCP KTLS support
From: Geliang Tang <[email protected]>
v15:
- patch 1: add proto parameter for tls_toe_bypass.
- patch 1: add a proto null-check in update_sk_prot.
- patch 1: hold mutex_lock in tls_proto_cleanup.
- patch 14: raise the limit of file descriptor values to 4096 to avoid test failures.
v14:
- address review comments from sashiko
- patch 1: add rcu for tls_proto, add tls_proto_cleanup.
- patch 2: add unregister helper.
- patch 3: add tls_prot_ops pointer to tls_proto, instead of
tls_context
- patch 5: update mptcp_get_skb_seq, using map_seq - offset, then the
patch "tls: add skb offset check for mptcp" can be dropped.
- patch 7: check len < 0.
- patch 8: call tcp_cleanup_ulp in mptcp_destroy_common.
- patch 9: replace all "tls" as "espintcp" in sock_test_tcpulp.
- patch 10: add is_mptcp_enable helper.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v13:
- patch 1: Add new patch "add per-protocol cache" to address AI review.
- patch 2: Hold RCU read lock in tls_prot_ops_find().
- patch 3: Set icsk_ulp_data to NULL in error path.
- patch 6: Use spin_is_locked() instead of lockdep_is_held() to fix
build errors.
- patch 9: Drop tcp_sock_set_ulp().
- patch 11: Remove the "return" statement in ulp_sock_pair and check
the return values of socket().
- patch 14: Update wait_for_tcp_close().
- patch 16: Add a max argument to init() and set it to '0' to disable
multipath testing, so that this series does not depend on the "mptcp:
fix stall because of data_ready" series. Multipath testing will be
re‑enabled together with that series later, as a squash‑to patch.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v12:
- Thanks for the help from Paolo and Gang Yan, I finally solved the
deadlock issue in read_sock. As a result, the patch "mptcp: avoid
sleeping in read_sock path under softirq" in v11 has been dropped,
and instead a lock_is_held interface has been added to struct
tls_prot_ops. When MPTCP implements this interface, it not only
checks sock_owned_by_user_nocheck(sk) as TCP does, but also needs
to check whether the MPTCP data lock is held.
- Update selftests to make them more stable.
- Fix shellcheck errors for the selftests.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v11:
- Fix memory leak errors reported by CI. In v10, these occurred in
the shutdown_reuse test and "usleep(500000)" caused the memory
leaks. In v11, a dedicated helper wait_for_tcp_close() has been
added to provide an appropriate delay.
- Drop the code that used mptcp_data_trylock() in mptcp_move_skbs()
to fix a deadlock issue, as that deadlock no longer occurs in v11.
- Do not add "mptcp" variable for the "tls_err" tests, adding it for
the "tls" tests is sufficient.
- No longer increase timeout values for poll/epoll tests, as they
are no longer needed.
- Add ns1 definition in mptcp_tls.sh to fix "ns1 is referenced but
not assigned" error.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v10:
- Address comments by ai review:
- patch 2: call tls_ctx_free(sk, ctx) and clear icsk_ulp_data before
goto out.
- patch 3: update commit log as "validate each SKB's offset except
the first".
- patch 5: add sock_owned_by_user() checks.
- patch 7: disable device offload for MPTCP sockets.
- patch 9: use TCP_ULP_NAME_MAX in mptcp_setsockopt_tcp_ulp(), drop
SOL_TLS in mptcp_supported_sockopt().
- Make .get_skb_off optional instead of mandatory, TCP does not need
to define it.
- Test "espintcp" ULP instead of "smc" in patch 10. "smc" ULP is
removed recently.
- With Gang Yan's "mptcp: fix stall because of data_ready" v3, mptcp
tls selftests can run without failures. Now add them in this set.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v9:
- add a new patch to "add MPTCP SKB offset check in strp queue walk",
thanks to Gang Yan for the fix.
- add a new patch to "avoid deadlocks in read_sock path", replacing the "in_softirq()" check used in v8.
- update the selftests.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v8:
- do not hold tls_prot_ops_lock in tls_init(); otherwise, a deadlock
occurs.
- change return value of mptcp_stream_is_readable() as 'bool' to fix the
"expected restricted __poll_t" warning reported by CI.
- fixed other CI checkpatch warnings regarding excessively long lines.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v7:
- Passing an MPTCP socket to tcp_sock_rate_check_app_limited() causes a
crash. In v7, an MPTCP version of check_app_limited() is implemented,
which calls tcp_sock_rate_check_app_limited() for each subflow.
- Register tls_tcp_ops and tls_mptcp_ops in tls_register() rather than in tls_init().
- Set ctx->ops in tls_init() instead of in do_tls_setsockopt_conf().
- Keep tls_device.c unchanged. MPTCP TLS_HW mode has not been implemented
yet, so EOPNOTSUPP is returned in this case.
- Also add TCP TLS tests in mptcp_join.sh.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v6:
- register each ops as Matt suggested.
- drop sk_is_msk().
- add tcp_sock_get_ulp/tcp_sock_set_ulp helpers.
- set another ULP in sock_test_tcpulp as Matt suggested.
- add tls tests using multiple subflows in mptcp_join.sh.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v5:
- As suggested by Mat and Matt, this set introduces struct tls_prot_ops
for TLS.
- Includes Gang Yan's patches to add MPTCP support to the TLS selftests.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v4:
- split "tls: add MPTCP protocol support" into smaller, more
focused patches.
- a new mptcp_inq helper has been implemented instead of directly
using mptcp_inq_hint to fix the issue mentioned in [1].
- add sk_is_msk helper.
- the 'expect' parameter will no longer be added to sock_test_tcpulp.
Instead, SOCK_TEST_TCPULP items causing the tests failure will be
directly removed.
- remove the "TCP KTLS" tests, keeping only the MPTCP-related ones.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v3:
- mptcp_read_sock() and mptcp_poll() are not exported, as mptcp_sockopt
test does not use read_sock/poll interfaces. They will be exported when
new tests are added in the future.
- call mptcp_inq_hint in tls_device_rx_resync_new_rec(), tls_device_core_ctrl_rx_resync() and tls_read_flush_backlog() too.
- update selftests.
- Link: https://patchwork.kernel.org/project/mptcp/cover/[email protected]/
v2:
- fix disconnect.
- update selftests.
This series adds KTLS support for MPTCP. Since the ULP of msk is not being used, ULP KTLS can be directly configured onto msk without affecting its communication.
Gang Yan (1):
mptcp: update mptcp_check_readable
Geliang Tang (14):
tls: add per-protocol cache to support mptcp
tls: introduce struct tls_prot_ops
tls: add tls_prot_ops pointer to tls_proto
mptcp: implement tls_mptcp_ops
tls: disable device offload for mptcp sockets
mptcp: update ulp getsockopt for tls support
mptcp: enable ulp setsockopt for tls support
selftests: mptcp: connect: use espintcp for ulp test
selftests: tls: add mptcp variant for testing
selftests: tls: increase pollin timeouts for mptcp
selftests: tls: increase nonblocking data size for mptcp
selftests: tls: wait close in shutdown_reuse for mptcp
selftests: tls: add mptcp test cases
selftests: mptcp: cover mptcp tls tests
include/linux/tcp.h | 1 + include/net/mptcp.h | 2 + include/net/tcp.h | 1 + include/net/tls.h | 30 +++ include/net/tls_toe.h | 3 +- net/ipv4/tcp.c | 45 ++-- net/mptcp/protocol.c | 117 ++++++++- net/mptcp/protocol.h | 1 + net/mptcp/sockopt.c | 53 +++- net/tls/tls.h | 3 +- net/tls/tls_device.c | 6 + net/tls/tls_main.c | 231 ++++++++++++++---- net/tls/tls_strp.c | 33 ++- net/tls/tls_sw.c | 7 +- net/tls/tls_toe.c | 5 +- tools/testing/selftests/net/mptcp/.gitignore | 1 + tools/testing/selftests/net/mptcp/Makefile | 2 + tools/testing/selftests/net/mptcp/config | 5 + .../selftests/net/mptcp/mptcp_connect.c | 4 +- .../testing/selftests/net/mptcp/mptcp_tls.sh | 62 +++++ tools/testing/selftests/net/mptcp/tls.c | 1 + tools/testing/selftests/net/tls.c | 184 +++++++++++++- 22 files changed, 699 insertions(+), 98 deletions(-) create mode 100755 tools/testing/selftests/net/mptcp/mptcp_tls.sh create mode 120000 tools/testing/selftests/net/mptcp/tls.c
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 1/15 tls: add per-protocol cache to support mptcp
From: Geliang Tang <[email protected]>
The TLS ULP uses a single global array to cache base protocol operations. When MPTCP sockets enable TLS, they overwrite this global cache with mptcp_prot, causing active TCP TLS sockets to use MPTCP-specific ops. This leads to type confusion and kernel panics.
Fix by replacing the global cache with a per-protocol linked list. Each protocol (TCP, MPTCP, etc.) now has its own cached operations, stored in struct tls_proto and referenced from tls_context.
--- include/net/tls.h | 10 ++++ include/net/tls_toe.h | 3 +- net/tls/tls.h | 3 +- net/tls/tls_main.c | 112 ++++++++++++++++++++++++++---------------- net/tls/tls_toe.c | 5 +- 5 files changed, 87 insertions(+), 46 deletions(-)
include/net/tls.h +10 -0
@@ -220,6 +220,14 @@ struct tls_prot_info {u16 tail_size; }; +struct tls_proto { +struct rcu_head rcu; +struct list_head list; +const struct proto *prot; +struct proto prots[TLS_NUM_CONFIG ][TLS_NUM_CONFIG ]; +struct proto_ops proto_ops[TLS_NUM_CONFIG ][TLS_NUM_CONFIG ]; +}; +struct tls_context {/* read-only cache line */ struct tls_prot_info prot_info;
@@ -257,6 +265,8 @@ struct tls_context {struct proto *sk_proto;struct sock *sk; +struct tls_proto *proto; +void (*sk_destruct)(struct sock *sk);union tls_crypto_context crypto_send;
include/net/tls_toe.h +2 -1
@@ -69,7 +69,8 @@ struct tls_toe_device {struct kref kref; }; -int tls_toe_bypass (struct sock *sk); +int tls_toe_bypass (struct sock *sk, +struct tls_proto *proto);int tls_toe_hash (struct sock *sk);void tls_toe_unhash (struct sock *sk);
net/tls/tls.h +2 -1
@@ -136,7 +136,8 @@ struct tls_rec {int __net_init tls_proc_init (struct net *net); void __net_exit tls_proc_fini(struct net *net); -struct tls_context *tls_ctx_create (struct sock *sk); +struct tls_context *tls_ctx_create (struct sock *sk, +struct tls_proto *proto);void tls_ctx_free (struct sock *sk,struct tls_context *ctx);void update_sk_prot (struct sock *sk,struct tls_context *ctx);
net/tls/tls_main.c +70 -42
179 lines not on this page · raw message
net/tls/tls_toe.c +3 -2
@@ -54,7 +54,8 @@ static void tls_toe_sk_destruct(struct sock *sk)tls_ctx_free (sk, ctx); } -int tls_toe_bypass (struct sock *sk) +int tls_toe_bypass (struct sock *sk, +struct tls_proto *proto) {struct tls_toe_device *dev;struct tls_context *ctx;
@@ -63,7 +64,7 @@ int tls_toe_bypass(struct sock *sk)spin_lock_bh (&device_spinlock);list_for_each_entry (dev, &device_list, dev_list) {if (dev->feature && dev->feature (dev)) { - ctx =tls_ctx_create (sk); + ctx =tls_ctx_create (sk, proto);if (!ctx) goto out;
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 2/15 tls: introduce struct tls_prot_ops
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
To extend MPTCP support based on TCP TLS, a tls_prot_ops structure has been introduced for TLS, encapsulating TCP-specific helpers within this structure.
Add registering, validating and finding functions for this structure to add, validate and find a tls_prot_ops on the global list tls_prot_ops_list.
Register TCP-specific structure tls_tcp_ops in tls_init().
--- include/net/tls.h | 19 +++++++++ net/tls/tls_main.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+)
include/net/tls.h +19 -0
@@ -220,6 +220,25 @@ struct tls_prot_info {u16 tail_size; }; +struct tls_prot_ops { +int protocol; +struct module *owner; +struct list_head list; + +int (*inq)(struct sock *sk); +int (*sendmsg_locked)(struct sock *sk,struct msghdr *msg,size_t size); +struct sk_buff *(*recv_skb)(struct sock *sk,u32 *off); +bool (*lock_is_held)(struct sock *sk); +int (*read_sock)(struct sock *sk,read_descriptor_t *desc, +sk_read_actor_t recv_actor); +void (*read_done)(struct sock *sk,size_t len); +u32 (*get_skb_seq)(struct sk_buff *skb); +__poll_t (*poll)(struct file *file,struct socket *sock, +struct poll_table_struct *wait); +bool (*epollin_ready)(const struct sock *sk); +void (*check_app_limited)(struct sock *sk); +}; +struct tls_proto {struct rcu_head rcu;struct list_head list;
net/tls/tls_main.c +97 -0
124 lines not on this page · raw message
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 3/15 tls: add tls_prot_ops pointer to tls_proto
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
A pointer to struct tls_prot_ops, named 'ops', has been added to struct tls_proto. The places originally calling TLS-specific helpers have now been modified to indirectly invoke them via 'ops' pointer in tls_proto.
In tls_build_proto(), proto->ops is assigned either 'tls_mptcp_ops' or 'tls_tcp_ops' based on the socket protocol.
--- include/net/tls.h | 1 + net/tls/tls_main.c | 16 ++++++++++++---- net/tls/tls_strp.c | 33 ++++++++++++++++++++++----------- net/tls/tls_sw.c | 7 +++++-- 4 files changed, 40 insertions(+), 17 deletions(-)
include/net/tls.h +1 -0
@@ -243,6 +243,7 @@ struct tls_proto {struct rcu_head rcu;struct list_head list;const struct proto *prot; +const struct tls_prot_ops *ops;struct proto prots[TLS_NUM_CONFIG ][TLS_NUM_CONFIG ];struct proto_ops proto_ops[TLS_NUM_CONFIG ][TLS_NUM_CONFIG ]; };
net/tls/tls_main.c +12 -4
@@ -199,13 +199,13 @@ int tls_push_sg(struct sock *sk, ctx->splicing_pages = true;while (1 ) {/* is sending application-limited? */ -tcp_rate_check_app_limited (sk); + ctx->proto->ops->check_app_limited (sk); p =sg_page (sg); retry:bvec_set_page (&bvec, p, size, offset);iov_iter_bvec (&msg.msg_iter,ITER_SOURCE , &bvec,1 , size); - ret =tcp_sendmsg_locked (sk, &msg, size); + ret = ctx->proto->ops->sendmsg_locked (sk, &msg, size);if (ret != size) {if (ret >0 ) {
@@ -420,14 +420,14 @@ static __poll_t tls_sk_poll(struct file *file, struct socket *sock,u8 shutdown;int state; - mask =tcp_poll (file, sock, wait); + tls_ctx =tls_get_ctx (sk); + mask = tls_ctx->proto->ops->poll (file, sock, wait); state =inet_sk_state_load (sk); shutdown =READ_ONCE (sk->sk_shutdown);if (unlikely (state !=TCP_ESTABLISHED || shutdown &RCV_SHUTDOWN ))return mask; - tls_ctx =tls_get_ctx (sk); ctx =tls_sw_ctx_rx (tls_ctx); psock =sk_psock_get (sk);
@@ -1011,6 +1011,7 @@ static void tls_proto_cleanup(void)static struct tls_proto *tls_build_proto (struct sock *sk) {struct proto *prot =READ_ONCE (sk->sk_prot); +struct tls_prot_ops *ops;struct tls_proto *proto; proto =tls_proto_find (prot);
@@ -1025,6 +1026,12 @@ static struct tls_proto *tls_build_proto(struct sock *sk)return proto; } + ops =tls_prot_ops_find (sk->sk_protocol); +if (!ops) { +mutex_unlock (&tls_proto_mutex); +return NULL ; + } + proto =kzalloc (sizeof (*proto),GFP_KERNEL );if (!proto) {mutex_unlock (&tls_proto_mutex);
@@ -1032,6 +1039,7 @@ static struct tls_proto *tls_build_proto(struct sock *sk) } proto->prot = prot; + proto->ops = ops;build_protos (proto->prots, prot);build_proto_ops (proto->proto_ops, sk->sk_socket->ops);
net/tls/tls_strp.c +22 -11
@@ -120,6 +120,7 @@ struct sk_buff *tls_strp_msg_detach(struct tls_sw_context_rx *ctx)int tls_strp_msg_cow (struct tls_sw_context_rx *ctx) {struct tls_strparser *strp = &ctx->strp; +struct tls_context *tls_ctx;struct sk_buff *skb;if (strp->copy_mode)
@@ -132,7 +133,8 @@ int tls_strp_msg_cow(struct tls_sw_context_rx *ctx)tls_strp_anchor_free (strp); strp->anchor = skb; -tcp_read_done (strp->sk, strp->stm.full_len); + tls_ctx =tls_get_ctx (strp->sk); + tls_ctx->proto->ops->read_done (strp->sk, strp->stm.full_len); strp->copy_mode =1 ;return 0 ;
@@ -376,6 +378,7 @@ static int tls_strp_copyin(read_descriptor_t *desc, struct sk_buff *in_skb,static int tls_strp_read_copyin (struct tls_strparser *strp) { +struct tls_context *ctx =tls_get_ctx (strp->sk);read_descriptor_t desc; desc.arg.data = strp;
@@ -383,13 +386,14 @@ static int tls_strp_read_copyin(struct tls_strparser *strp) desc.count =1 ;/* give more than one skb per call */ /* sk should be locked here, so okay to do read_sock */ -tcp_read_sock (strp->sk, &desc, tls_strp_copyin); + ctx->proto->ops->read_sock (strp->sk, &desc, tls_strp_copyin);return desc.error; }static int tls_strp_read_copy (struct tls_strparser *strp,bool qshort) { +struct tls_context *ctx =tls_get_ctx (strp->sk);struct skb_shared_info *shinfo;struct page *page;int need_spc, len;
@@ -398,7 +402,7 @@ static int tls_strp_read_copy(struct tls_strparser *strp, bool qshort)* to read the data out. Otherwise the connection will stall. * Without pressure threshold of INT_MAX will never be ready. */ -if (likely (qshort && !tcp_epollin_ready (strp->sk,INT_MAX ))) +if (likely (qshort && !ctx->proto->ops->epollin_ready (strp->sk)))return 0 ; shinfo =skb_shinfo (strp->anchor);
@@ -434,12 +438,13 @@ static int tls_strp_read_copy(struct tls_strparser *strp, bool qshort)static bool tls_strp_check_queue_ok (struct tls_strparser *strp) {unsigned int len = strp->stm.offset + strp->stm.full_len; +struct tls_context *ctx =tls_get_ctx (strp->sk);struct sk_buff *first, *skb;u32 seq; first =skb_shinfo (strp->anchor)->frag_list; skb = first; - seq =TCP_SKB_CB (first)->seq; + seq = ctx->proto->ops->get_skb_seq (first);/* Make sure there's no duplicate data in the queue, * and the decrypted status matches.
@@ -449,7 +454,7 @@ static bool tls_strp_check_queue_ok(struct tls_strparser *strp) len -= skb->len; skb = skb->next; -if (TCP_SKB_CB (skb)->seq != seq) +if (ctx->proto->ops->get_skb_seq (skb) != seq)return false;if (skb_cmp_decrypted (first, skb))return false;
@@ -460,11 +465,11 @@ static bool tls_strp_check_queue_ok(struct tls_strparser *strp)static void tls_strp_load_anchor_with_queue (struct tls_strparser *strp,int len) { -struct tcp_sock *tp =tcp_sk (strp->sk); +struct tls_context *ctx =tls_get_ctx (strp->sk);struct sk_buff *first;u32 offset; - first =tcp_recv_skb (strp->sk, tp->copied_seq, &offset); + first = ctx->proto->ops->recv_skb (strp->sk, &offset);if (WARN_ON_ONCE (!first))return ;
@@ -483,6 +488,7 @@ static void tls_strp_load_anchor_with_queue(struct tls_strparser *strp, int len)bool tls_strp_msg_load (struct tls_strparser *strp,bool force_refresh) { +struct tls_context *ctx =tls_get_ctx (strp->sk);struct strp_msg *rxm;struct tls_msg *tlm;
@@ -490,7 +496,7 @@ bool tls_strp_msg_load(struct tls_strparser *strp, bool force_refresh)DEBUG_NET_WARN_ON_ONCE (!strp->stm.full_len);if (!strp->copy_mode && force_refresh) { -if (unlikely (tcp_inq (strp->sk) < strp->stm.full_len)) { +if (unlikely (ctx->proto->ops->inq (strp->sk) < strp->stm.full_len)) {WRITE_ONCE (strp->msg_ready,0 );memset (&strp->stm,0 ,sizeof (strp->stm));return false;
@@ -511,9 +517,10 @@ bool tls_strp_msg_load(struct tls_strparser *strp, bool force_refresh)/* Called with lock held on lower socket */ static int tls_strp_read_sock (struct tls_strparser *strp) { +struct tls_context *ctx =tls_get_ctx (strp->sk);int sz, inq; - inq =tcp_inq (strp->sk); + inq = ctx->proto->ops->inq (strp->sk);if (inq <1 )return 0 ;
@@ -556,6 +563,8 @@ void tls_strp_check_rcv(struct tls_strparser *strp)/* Lower sock lock held */ void tls_strp_data_ready (struct tls_strparser *strp) { +struct tls_context *ctx =tls_get_ctx (strp->sk); +/* This check is needed to synchronize with do_tls_strp_work. * do_tls_strp_work acquires a process lock (lock_sock) whereas * the lock held here is bh_lock_sock. The two locks can be
@@ -563,7 +572,7 @@ void tls_strp_data_ready(struct tls_strparser *strp)* allows a thread in BH context to safely check if the process * lock is held. In this case, if the lock is held, queue work. */ -if (sock_owned_by_user_nocheck (strp->sk)) { +if (ctx->proto->ops->lock_is_held (strp->sk)) {queue_work (tls_strp_wq, &strp->work);return ; }
@@ -583,10 +592,12 @@ static void tls_strp_work(struct work_struct *w)void tls_strp_msg_done (struct tls_strparser *strp) { +struct tls_context *ctx =tls_get_ctx (strp->sk); +WARN_ON (!strp->stm.full_len);if (likely (!strp->copy_mode)) -tcp_read_done (strp->sk, strp->stm.full_len); + ctx->proto->ops->read_done (strp->sk, strp->stm.full_len);else tls_strp_flush_anchor_copy (strp);
net/tls/tls_sw.c +5 -2
@@ -1963,13 +1963,14 @@ tls_read_flush_backlog(struct sock *sk, struct tls_prot_info *prot, size_t len_left, size_t decrypted, ssize_t done, size_t *flushed_at) { + struct tls_context *tls_ctx = tls_get_ctx(sk);size_t max_rec;if (len_left <= decrypted)return false; max_rec = prot->overhead_size - prot->tail_size +TLS_MAX_PAYLOAD_SIZE ; -if (done - *flushed_at <SZ_128K &&tcp_inq (sk) > max_rec) +if (done - *flushed_at <SZ_128K && tls_ctx->proto->ops->inq (sk) > max_rec)return false; *flushed_at = done;
@@ -2455,6 +2456,7 @@ int tls_rx_msg_size(struct tls_strparser *strp, struct sk_buff *skb)size_t cipher_overhead;size_t data_len =0 ;int ret; +u32 seq;/* Verify that we have a full TLS header, or wait for more data */ if (strp->stm.offset + prot->prepend_size > skb->len)
@@ -2497,8 +2499,9 @@ int tls_rx_msg_size(struct tls_strparser *strp, struct sk_buff *skb) goto read_failure; } + seq = tls_ctx->proto->ops->get_skb_seq (skb);tls_device_rx_resync_new_rec (strp->sk, data_len +TLS_HEADER_SIZE , -TCP_SKB_CB (skb)->seq + strp->stm.offset); + seq + strp->stm.offset);return data_len +TLS_HEADER_SIZE ; read_failure:
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 4/15 mptcp: update mptcp_check_readable
In reply to Geliang TangFrom: Gang Yan <[email protected]>
This patch makes mptcp_check_readable() aligned with TCP, and renames it to mptcp_stream_is_readable(). It will be used in the case of KTLS, because 'prot' will be modified, tls_sw_sock_is_readable() is expected to be called from prot->sock_is_readable().
--- net/mptcp/protocol.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
net/mptcp/protocol.c +6 -3
@@ -3262,9 +3262,11 @@ void __mptcp_unaccepted_force_close(struct sock *sk)__mptcp_destroy_sock (sk); } -static __poll_t mptcp_check_readable (struct sock *sk) +static bool mptcp_stream_is_readable (struct sock *sk) { -return mptcp_epollin_ready (sk) ?EPOLLIN |EPOLLRDNORM :0 ; +if (mptcp_epollin_ready (sk)) +return true; +return sk_is_readable (sk); }static void mptcp_check_listen_stop (struct sock *sk)
@@ -4326,7 +4328,8 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock, mask |=EPOLLIN |EPOLLRDNORM |EPOLLRDHUP ;if (state !=TCP_SYN_SENT && state !=TCP_SYN_RECV ) { - mask |=mptcp_check_readable (sk); +if (mptcp_stream_is_readable (sk)) + mask |=EPOLLIN |EPOLLRDNORM ;if (shutdown &SEND_SHUTDOWN ) mask |=EPOLLOUT |EPOLLWRNORM ;else
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 5/15 mptcp: implement tls_mptcp_ops
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
This patch implements the MPTCP-specific struct tls_prot_ops, named 'tls_mptcp_ops'.
Note that there is a slight difference between mptcp_inq() and mptcp_inq_hint(), it does not return 1 when the socket is closed or shut down; instead, it returns 0. Otherwise, it would break the condition "inq < 1" in tls_strp_read_sock().
Passing an MPTCP socket to tcp_sock_rate_check_app_limited() can trigger a crash. Here, an MPTCP version of check_app_limited() is implemented, which calls tcp_sock_rate_check_app_limited() for each subflow.
When MPTCP implements lock_is_held interface, it not only checks sock_owned_by_user_nocheck(sk) as TCP does, but also needs to check whether the MPTCP data lock is held.
--- include/net/mptcp.h | 2 + include/net/tcp.h | 1 + net/ipv4/tcp.c | 9 +++- net/mptcp/protocol.c | 107 ++++++++++++++++++++++++++++++++++++++++--- net/mptcp/protocol.h | 1 + net/tls/tls_main.c | 6 +++ 6 files changed, 118 insertions(+), 8 deletions(-)
include/net/mptcp.h +2 -0
@@ -132,6 +132,8 @@ struct mptcp_pm_ops {void (*release)(struct mptcp_sock *msk); }____cacheline_aligned_in_smp ; +extern struct tls_prot_ops tls_mptcp_ops; +#ifdef CONFIG_MPTCP void mptcp_init (void );
include/net/tcp.h +1 -0
@@ -852,6 +852,7 @@ static inline int tcp_bound_to_half_wnd(struct tcp_sock *tp, int pktsize)/* tcp.c */ void tcp_get_info (struct sock *,struct tcp_info *); +void tcp_sock_rate_check_app_limited (struct tcp_sock *tp);void tcp_rate_check_app_limited (struct sock *sk);/* Read 'sendfile()'-style from a TCP socket */
net/ipv4/tcp.c +7 -2
@@ -1100,9 +1100,9 @@ int tcp_sendmsg_fastopen(struct sock *sk, struct msghdr *msg, int *copied, }/* If a gap is detected between sends, mark the socket application-limited. */ -void tcp_rate_check_app_limited (struct sock *sk) +void tcp_sock_rate_check_app_limited (struct tcp_sock *tp) { -struct tcp_sock *tp =tcp_sk (sk); +struct sock *sk = (struct sock *)tp; if (/* We have less than one packet to send. */ tp->write_seq - tp->snd_nxt < tp->mss_cache &&
@@ -1115,6 +1115,11 @@ void tcp_rate_check_app_limited(struct sock *sk) tp->app_limited = (tp->delivered +tcp_packets_in_flight (tp)) ? :1 ; } + +void tcp_rate_check_app_limited (struct sock *sk) +{ +tcp_sock_rate_check_app_limited (tcp_sk (sk)); +}EXPORT_SYMBOL_GPL (tcp_rate_check_app_limited);int tcp_sendmsg_locked (struct sock *sk,struct msghdr *msg,size_t size)
net/mptcp/protocol.c +101 -6
156 lines not on this page · raw message
net/mptcp/protocol.h +1 -0
@@ -380,6 +380,7 @@ struct mptcp_sock {#define mptcp_data_lock (sk) spin_lock_bh(&(sk)->sk_lock.slock)#define mptcp_data_unlock (sk) spin_unlock_bh(&(sk)->sk_lock.slock) +#define mptcp_data_is_locked (sk) spin_is_locked(&(sk)->sk_lock.slock)#define mptcp_for_each_subflow (__msk, __subflow) \ list_for_each_entry(__subflow, &((__msk)->conn_list), node)
net/tls/tls_main.c +6 -0
@@ -1384,6 +1384,9 @@ static int __init tls_register(void)tcp_register_ulp (&tcp_tls_ulp_ops);tls_register_prot_ops (&tls_tcp_ops); +#ifdef CONFIG_MPTCP +tls_register_prot_ops (&tls_mptcp_ops); +#endif return 0 ; err_strp:
@@ -1396,6 +1399,9 @@ static int __init tls_register(void) static void __exit tls_unregister(void) {tls_proto_cleanup (); +#ifdef CONFIG_MPTCP +tls_unregister_prot_ops (&tls_mptcp_ops); +#endif tls_unregister_prot_ops (&tls_tcp_ops);tcp_unregister_ulp (&tcp_tls_ulp_ops);tls_strp_dev_exit ();
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 6/15 tls: disable device offload for mptcp sockets
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
MPTCP TLS hardware offload is not yet implemented. Return -EOPNOTSUPP when attempting to enable device offload on MPTCP sockets.
--- net/tls/tls_device.c | 6 ++++++ 1 file changed, 6 insertions(+)
net/tls/tls_device.c +6 -0
@@ -1074,6 +1074,9 @@ int tls_set_device_offload(struct sock *sk) ctx =tls_get_ctx (sk); prot = &ctx->prot_info; +if (sk->sk_protocol ==IPPROTO_MPTCP ) +return -EOPNOTSUPP ; +if (ctx->priv_ctx_tx)return -EEXIST ;
@@ -1196,6 +1199,9 @@ int tls_set_device_offload_rx(struct sock *sk, struct tls_context *ctx)struct net_device *netdev;int rc =0 ; +if (sk->sk_protocol ==IPPROTO_MPTCP ) +return -EOPNOTSUPP ; +if (ctx->crypto_recv.info.version !=TLS_1_2_VERSION )return -EOPNOTSUPP ;
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 7/15 mptcp: update ulp getsockopt for tls support
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
This patch extracts TCP_ULP getsockopt operation into a tcp_sock_get_ulp() helper so that it can also be used in MPTCP.
TCP_ULP was obtained by calling mptcp_getsockopt_first_sf_only() to get ULP of the first subflow. Now that the mechanism has changed, a new helper mptcp_getsockopt_tcp_ulp() is added to get ULP of msk.
--- include/linux/tcp.h | 1 + net/ipv4/tcp.c | 36 ++++++++++++++++++++++-------------- net/mptcp/sockopt.c | 18 ++++++++++++++++++ 3 files changed, 41 insertions(+), 14 deletions(-)
include/linux/tcp.h +1 -0
@@ -653,6 +653,7 @@ void tcp_sock_set_quickack(struct sock *sk, int val);int tcp_sock_set_syncnt (struct sock *sk,int val);int tcp_sock_set_user_timeout (struct sock *sk,int val);int tcp_sock_set_maxseg (struct sock *sk,int val); +int tcp_sock_get_ulp (struct sock *sk,sockptr_t optval,sockptr_t optlen);static inline bool dst_tcp_usec_ts (const struct dst_entry *dst) {
net/ipv4/tcp.c +22 -14
@@ -4478,6 +4478,27 @@ struct sk_buff *tcp_get_timestamping_opt_stats(const struct sock *sk,return stats; } +int tcp_sock_get_ulp (struct sock *sk,sockptr_t optval,sockptr_t optlen) +{ +struct inet_connection_sock *icsk =inet_csk (sk); +int len; + +if (copy_from_sockptr (&len, optlen,sizeof (int ))) +return -EFAULT ; + len = min_t(unsigned int, len, TCP_ULP_NAME_MAX); +if (!icsk->icsk_ulp_ops) { + len =0 ; +if (copy_to_sockptr (optlen, &len,sizeof (int ))) +return -EFAULT ; +return 0 ; + } +if (copy_to_sockptr (optlen, &len,sizeof (int ))) +return -EFAULT ; +if (copy_to_sockptr (optval, icsk->icsk_ulp_ops->name, len)) +return -EFAULT ; +return 0 ; +} +int do_tcp_getsockopt (struct sock *sk,int level,int optname,sockptr_t optval,sockptr_t optlen) {
@@ -4587,20 +4608,7 @@ int do_tcp_getsockopt(struct sock *sk, int level,return 0 ;case TCP_ULP : -if (copy_from_sockptr (&len, optlen,sizeof (int ))) -return -EFAULT ; - len = min_t(unsigned int, len, TCP_ULP_NAME_MAX); -if (!icsk->icsk_ulp_ops) { - len =0 ; -if (copy_to_sockptr (optlen, &len,sizeof (int ))) -return -EFAULT ; -return 0 ; - } -if (copy_to_sockptr (optlen, &len,sizeof (int ))) -return -EFAULT ; -if (copy_to_sockptr (optval, icsk->icsk_ulp_ops->name, len)) -return -EFAULT ; -return 0 ; +return tcp_sock_get_ulp (sk, optval, optlen);case TCP_FASTOPEN_KEY : {u64 key[TCP_FASTOPEN_KEY_BUF_LENGTH /sizeof (u64)];
net/mptcp/sockopt.c +18 -0
@@ -1393,6 +1393,23 @@ static int mptcp_put_int_option(struct mptcp_sock *msk, char __user *optval,return 0 ; } +static int mptcp_getsockopt_tcp_ulp (struct sock *sk,char __user *optval, +int __user *optlen) +{ +int ret, len; + +if (copy_from_sockptr (&len,USER_SOCKPTR (optlen),sizeof (int ))) +return -EFAULT ; + +if (len <0 ) +return -EINVAL ; + +lock_sock (sk); + ret =tcp_sock_get_ulp (sk,USER_SOCKPTR (optval),USER_SOCKPTR (optlen)); +release_sock (sk); +return ret; +} +static int mptcp_getsockopt_sol_tcp (struct mptcp_sock *msk,int optname,char __user *optval,int __user *optlen) {
@@ -1400,6 +1417,7 @@ static int mptcp_getsockopt_sol_tcp(struct mptcp_sock *msk, int optname,switch (optname) {case TCP_ULP : +return mptcp_getsockopt_tcp_ulp (sk, optval, optlen);case TCP_CONGESTION :case TCP_INFO :case TCP_CC_INFO :
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 8/15 mptcp: enable ulp setsockopt for tls support
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
Allow MPTCP sockets to set the TCP_ULP socket option to enable TLS. Add mptcp_setsockopt_tcp_ulp() which validates the socket state (must not be CLOSE or LISTEN), only accepts "tls" as the ULP name, and then calls tcp_set_ulp().
Include TCP_ULP in the list of supported options in supported_sockopt(), and handle it in setsockopt_sol_tcp() instead of returning -EOPNOTSUPP.
Call tcp_cleanup_ulp() in mptcp_destroy_common() to release ULP module's reference count.
--- net/mptcp/protocol.c | 1 + net/mptcp/sockopt.c | 35 ++++++++++++++++++++++++++++++++++- 2 files changed, 35 insertions(+), 1 deletion(-)
net/mptcp/protocol.c +1 -0
@@ -3422,6 +3422,7 @@ static void mptcp_destroy_common(struct mptcp_sock *msk)__mptcp_clear_xmit (sk);mptcp_backlog_purge (sk); +tcp_cleanup_ulp (sk);/* join list will be eventually flushed (with rst) at sock lock release time */ mptcp_for_each_subflow_safe (msk, subflow, tmp)
net/mptcp/sockopt.c +34 -1
@@ -12,6 +12,7 @@#include <net/protocol.h> #include <net/tcp.h> #include <net/mptcp.h> +#include <net/tls.h> #include "protocol.h" #define MIN_INFO_OPTLEN_SIZE 16
@@ -567,6 +568,7 @@ static bool mptcp_supported_sockopt(int level, int optname)case TCP_FASTOPEN_CONNECT :case TCP_FASTOPEN_KEY :case TCP_FASTOPEN_NO_COOKIE : +case TCP_ULP :return true; }
@@ -815,6 +817,37 @@ static int mptcp_setsockopt_all_sf(struct mptcp_sock *msk, int level,return ret; } +static int mptcp_setsockopt_tcp_ulp (struct sock *sk,sockptr_t optval, +unsigned int optlen) +{ +char name[TCP_ULP_NAME_MAX ]; +int err =0 ; +size_t len; +int val; + +if (optlen <1 ) +return -EINVAL ; + + len =min_t (long,TCP_ULP_NAME_MAX -1 , optlen); + val =strncpy_from_sockptr (name, optval, len); +if (val <0 ) +return -EFAULT ; + name[val] =0 ; + +if (strcmp (name,"tls" )) +return -EOPNOTSUPP ; + +sockopt_lock_sock (sk); +if ((1 << sk->sk_state) & (TCPF_CLOSE |TCPF_LISTEN )) { + err = -ENOTCONN ; + goto out; + } + err =tcp_set_ulp (sk, name); +out: +sockopt_release_sock (sk); +return err; +} +static int mptcp_setsockopt_sol_tcp (struct mptcp_sock *msk,int optname,sockptr_t optval,unsigned int optlen) {
@@ -823,7 +856,7 @@ static int mptcp_setsockopt_sol_tcp(struct mptcp_sock *msk, int optname,switch (optname) {case TCP_ULP : -return -EOPNOTSUPP ; +return mptcp_setsockopt_tcp_ulp (sk, optval, optlen);case TCP_CONGESTION :return mptcp_setsockopt_sol_tcp_congestion (msk, optval, optlen);case TCP_DEFER_ACCEPT :
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 9/15 selftests: mptcp: connect: use espintcp for ulp test
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
With KTLS being implemented, "tls" should no longer be used in sock_test_tcpulp(), it breaks mptcp_connect.sh tests. Another ULP name, "espintcp", is set instead in this patch.
--- tools/testing/selftests/net/mptcp/mptcp_connect.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/net/mptcp/mptcp_connect.c +2 -2
@@ -285,11 +285,11 @@ static void sock_test_tcpulp(int sock, int proto, unsigned int line)if (buflen >0 ) {if (strcmp (buf,"mptcp" ) !=0 )xerror ("unexpected ULP '%s' for proto %d at line %u" , buf, proto, line); - ret =do_ulp_so (sock,"tls" ); + ret =do_ulp_so (sock,"espintcp" );if (ret ==0 )X ("setsockopt" ); }else if (proto ==IPPROTO_MPTCP ) { - ret =do_ulp_so (sock,"tls" ); + ret =do_ulp_so (sock,"espintcp" );if (ret !=-1 )X ("setsockopt" ); }
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 10/15 selftests: tls: add mptcp variant for testing
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
To enable easy MPTCP socket creation in MPTCP TLS tests, two protocol parameters (cli_proto and srv_proto) have been added to ulp_sock_pair(). These are passed as third arguments of socket(): 0 creates TCP sockets, IPPROTO_MPTCP creates MPTCP sockets.
A new variant "mptcp" is added both in FIXTURE_VARIANT(tls) to control whether to create MPTCP sockets or not for tests.
--- tools/testing/selftests/net/tls.c | 45 +++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 5 deletions(-)
tools/testing/selftests/net/tls.c +40 -5
@@ -26,6 +26,10 @@#define TLS_PAYLOAD_MAX_LEN 16384#define SOL_TLS 282 +#ifndef IPPROTO_MPTCP +#define IPPROTO_MPTCP 262 +#endif +static int fips_enabled;struct tls_crypto_info_keys {
@@ -108,8 +112,9 @@ static void memrnd(void *s, size_t n) *byte++ =rand (); } -static void ulp_sock_pair (struct __test_metadata *_metadata, -int *fd,int *cfd,bool *notls) +static void __ulp_sock_pair (struct __test_metadata *_metadata, +int *fd,int *cfd,bool *notls, +int cli_proto,int srv_proto) {struct sockaddr_in addr;socklen_t len;
@@ -122,8 +127,8 @@ static void ulp_sock_pair(struct __test_metadata *_metadata, addr.sin_addr.s_addr =htonl (INADDR_ANY ); addr.sin_port =0 ; - *fd =socket (AF_INET ,SOCK_STREAM ,0 ); - sfd =socket (AF_INET ,SOCK_STREAM ,0 ); + *fd =socket (AF_INET ,SOCK_STREAM , cli_proto); + sfd =socket (AF_INET ,SOCK_STREAM , srv_proto); ret =bind (sfd, &addr,sizeof (addr));ASSERT_EQ (ret,0 );
@@ -153,6 +158,12 @@ static void ulp_sock_pair(struct __test_metadata *_metadata,ASSERT_EQ (ret,0 ); } +static void ulp_sock_pair (struct __test_metadata *_metadata, +int *fd,int *cfd,bool *notls) +{ +__ulp_sock_pair (_metadata, fd, cfd, notls,0 ,0 ); +} +/* Produce a basic cmsg */ static int tls_send_cmsg (int fd,unsigned char record_type,void *data,size_t len,int flags)
@@ -310,6 +321,7 @@ FIXTURE_VARIANT(tls)uint16_t tls_version;uint16_t cipher_type;bool nopad, fips_non_compliant; +bool mptcp; }; FIXTURE_VARIANT_ADD(tls, 12_aes_gcm)
@@ -395,6 +407,24 @@ FIXTURE_VARIANT_ADD(tls, 12_aria_gcm_256) .cipher_type = TLS_CIPHER_ARIA_GCM_256, }; +static bool is_mptcp_enable (struct __test_metadata *_metadata) +{ +char buf[16 ] = {0 }; +ssize_t n; +int fd; + + fd =open ("/proc/sys/net/mptcp/enabled" ,O_RDONLY ); +if (fd <=0 ) +return false; + + n =read (fd, buf,sizeof (buf) -1 ); +if (n <=0 ) +return false; + +close (fd); +return (atoi (buf) ==1 ); +} +FIXTURE_SETUP (tls) {struct tls_crypto_info_keys tls12;
@@ -404,10 +434,15 @@ FIXTURE_SETUP(tls)if (fips_enabled && variant->fips_non_compliant)SKIP (return,"Unsupported cipher in FIPS mode" ); +if (variant->mptcp && !is_mptcp_enable (_metadata)) +SKIP (return,"no MPTCP support" ); +tls_crypto_info_init (variant->tls_version, variant->cipher_type, &tls12,0 ); -ulp_sock_pair (_metadata, &self->fd, &self->cfd, &self->notls); +__ulp_sock_pair (_metadata, &self->fd, &self->cfd, &self->notls, + variant->mptcp ?IPPROTO_MPTCP :0 , + variant->mptcp ?IPPROTO_MPTCP :0 );if (self->notls)return ;
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 11/15 selftests: tls: increase pollin timeouts for mptcp
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
MPTCP requires longer timeouts in pollin test due to subflow establishment delays and slower state transitions. Increase timeout values to prevent false failures:
# RUN tls.13_sm4_ccm_mptcp.pollin ...
# tls.c:1411:pollin:Expected poll(&fd, 1, 20) (0) == 1 (1) # tls.c:1412:pollin:Expected fd.revents & POLLIN (0) == 1 (1) # pollin: Test failed
# FAIL tls.13_sm4_ccm_mptcp.pollin
not ok 357 tls.13_sm4_ccm_mptcp.pollin
--- tools/testing/selftests/net/tls.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
tools/testing/selftests/net/tls.c +3 -2
@@ -1320,6 +1320,7 @@ TEST_F(tls, bidir) TEST_F(tls, pollin) { +int timeout = variant->mptcp ?100 :20 ;char const *test_str ="test_poll" ;struct pollfd fd = {0 ,0 ,0 };char buf[10 ];
@@ -1329,11 +1330,11 @@ TEST_F(tls, pollin) fd.fd = self->cfd; fd.events =POLLIN ; -EXPECT_EQ (poll (&fd,1 ,20 ),1 ); +EXPECT_EQ (poll (&fd,1 , timeout),1 );EXPECT_EQ (fd.revents &POLLIN ,1 );EXPECT_EQ (recv (self->cfd, buf, send_len,MSG_WAITALL ), send_len);/* Test timing out */ -EXPECT_EQ (poll (&fd,1 ,20 ),0 ); +EXPECT_EQ (poll (&fd,1 , timeout),0 ); }TEST_F (tls, poll_wait)
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 12/15 selftests: tls: increase nonblocking data size for mptcp
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
Increase the data size in nonblocking tests to accommodate MPTCP's multi-subflow behavior and ensure sufficient data for testing, avoiding the following errors:
# RUN tls.12_aria_gcm_mptcp.nonblocking ...
# tls.c:1534:nonblocking:Expected 0 (0) != eagain (0) # nonblocking: Test failed
--- tools/testing/selftests/net/tls.c | 3 +++ 1 file changed, 3 insertions(+)
tools/testing/selftests/net/tls.c +3 -0
@@ -1426,6 +1426,9 @@ TEST_F(tls, nonblocking)int flags;int res; +if (variant->mptcp) + data *=4 ; + flags =fcntl (self->fd,F_GETFL ,0 );fcntl (self->fd,F_SETFL , flags |O_NONBLOCK );fcntl (self->cfd,F_SETFL , flags |O_NONBLOCK );
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 13/15 selftests: tls: wait close in shutdown_reuse for mptcp
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
In shutdown_reuse tests, add a delay after shutdown to wait for MPTCP sockets to reach TCP_CLOSE state before reuse via bind(), avoiding the following errors:
# RUN tls.12_aes_gcm_mptcp.shutdown_reuse ...
# tls.c:1790:shutdown_reuse:Expected ret (-1) == 0 (0) # shutdown_reuse: Test failed
# FAIL tls.12_aes_gcm_mptcp.shutdown_reuse
not ok 14 tls.12_aes_gcm_mptcp.shutdown_reuse
# RUN tls.13_aes_gcm_mptcp.shutdown_reuse ...
# tls.c:1790:shutdown_reuse:Expected ret (-1) == 0 (0) # shutdown_reuse: Test failed
# FAIL tls.13_aes_gcm_mptcp.shutdown_reuse
not ok 15 tls.13_aes_gcm_mptcp.shutdown_reuse
# RUN tls.12_chacha_mptcp.shutdown_reuse ...
# OK tls.12_chacha_mptcp.shutdown_reuse
ok 16 tls.12_chacha_mptcp.shutdown_reuse
# RUN tls.13_chacha_mptcp.shutdown_reuse ...
# OK tls.13_chacha_mptcp.shutdown_reuse
ok 17 tls.13_chacha_mptcp.shutdown_reuse
# RUN tls.13_sm4_gcm_mptcp.shutdown_reuse ...
# tls.c:1790:shutdown_reuse:Expected ret (-1) == 0 (0) # shutdown_reuse: Test failed
# FAIL tls.13_sm4_gcm_mptcp.shutdown_reuse
not ok 18 tls.13_sm4_gcm_mptcp.shutdown_reuse
This TCP_CLOSE check is just for MPTCP, because it should not slow down plain TCP tests.
--- tools/testing/selftests/net/tls.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
tools/testing/selftests/net/tls.c +26 -0
@@ -30,6 +30,10 @@#define IPPROTO_MPTCP 262#endif +#ifndef TCP_CLOSE +#define TCP_CLOSE 7 +#endif +static int fips_enabled;struct tls_crypto_info_keys {
@@ -1699,6 +1703,25 @@ TEST_F(tls, shutdown_unsent)shutdown (self->cfd,SHUT_RDWR ); } +static bool wait_for_tcp_close (struct __test_metadata *_metadata, +int fd,int max) +{ +struct tcp_info info; +socklen_t len; +int i, ret; + +for (i =0 ; i < max; i++) { + len =sizeof (info); + ret =getsockopt (fd,IPPROTO_TCP ,TCP_INFO , &info, &len); +ASSERT_EQ (ret,0 ); +if (info.tcpi_state ==TCP_CLOSE ) +return true; +usleep (1000 ); + } + +return false; +} + TEST_F(tls, shutdown_reuse) {struct sockaddr_in addr;
@@ -1708,6 +1731,9 @@ TEST_F(tls, shutdown_reuse)shutdown (self->cfd,SHUT_RDWR );close (self->cfd); +if (variant->mptcp) +EXPECT_TRUE (wait_for_tcp_close (_metadata, self->fd,1000 )); + addr.sin_family =AF_INET ; addr.sin_addr.s_addr =htonl (INADDR_ANY ); addr.sin_port =0 ;
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 14/15 selftests: tls: add mptcp test cases
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
This patch introduces MPTCP test cases for the TLS fixture. These "mptcp" variants are configured to create MPTCP sockets specifically for MPTCP TLS testing purposes.
The default limit of 1024 for file descriptor values is too low for the newly added MPTCP tests, causing accept() to fail when the fd number exceeds 1024. Raise the limit to 4096 to avoid test failures.
--- tools/testing/selftests/net/tls.c | 105 ++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+)
tools/testing/selftests/net/tls.c +105 -0
@@ -20,6 +20,7 @@#include <sys/sendfile.h> #include <sys/socket.h> #include <sys/stat.h> +#include <sys/resource.h> #include "kselftest_harness.h"
@@ -411,6 +412,102 @@ FIXTURE_VARIANT_ADD(tls, 12_aria_gcm_256) .cipher_type = TLS_CIPHER_ARIA_GCM_256, }; +FIXTURE_VARIANT_ADD(tls, 12_aes_gcm_mptcp) +{ + .tls_version = TLS_1_2_VERSION, + .cipher_type = TLS_CIPHER_AES_GCM_128, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_aes_gcm_mptcp) +{ + .tls_version =TLS_1_3_VERSION , + .cipher_type = TLS_CIPHER_AES_GCM_128, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 12_chacha_mptcp) +{ + .tls_version =TLS_1_2_VERSION , + .cipher_type = TLS_CIPHER_CHACHA20_POLY1305, + .fips_non_compliant = true, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_chacha_mptcp) +{ + .tls_version =TLS_1_3_VERSION , + .cipher_type = TLS_CIPHER_CHACHA20_POLY1305, + .fips_non_compliant = true, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_sm4_gcm_mptcp) +{ + .tls_version =TLS_1_3_VERSION , + .cipher_type = TLS_CIPHER_SM4_GCM, + .fips_non_compliant = true, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_sm4_ccm_mptcp) +{ + .tls_version = TLS_1_3_VERSION, + .cipher_type = TLS_CIPHER_SM4_CCM, + .fips_non_compliant = true, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 12_aes_ccm_mptcp) +{ + .tls_version =TLS_1_2_VERSION , + .cipher_type = TLS_CIPHER_AES_CCM_128, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_aes_ccm_mptcp) +{ + .tls_version =TLS_1_3_VERSION , + .cipher_type = TLS_CIPHER_AES_CCM_128, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 12_aes_gcm_256_mptcp) +{ + .tls_version =TLS_1_2_VERSION , + .cipher_type = TLS_CIPHER_AES_GCM_256, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_aes_gcm_256_mptcp) +{ + .tls_version =TLS_1_3_VERSION , + .cipher_type = TLS_CIPHER_AES_GCM_256, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 13_nopad_mptcp) +{ + .tls_version = TLS_1_3_VERSION, + .cipher_type = TLS_CIPHER_AES_GCM_128, + .nopad = true, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 12_aria_gcm_mptcp) +{ + .tls_version =TLS_1_2_VERSION , + .cipher_type = TLS_CIPHER_ARIA_GCM_128, + .mptcp = true, +}; + +FIXTURE_VARIANT_ADD(tls, 12_aria_gcm_256_mptcp) +{ + .tls_version =TLS_1_2_VERSION , + .cipher_type = TLS_CIPHER_ARIA_GCM_256, + .mptcp = true, +}; +static bool is_mptcp_enable (struct __test_metadata *_metadata) {char buf[16 ] = {0 };
@@ -3372,4 +3469,12 @@ static void __attribute__((constructor)) fips_check(void) { } } +static void __attribute__((constructor))increase_rlimit (void ) +{ +struct rlimit rl = {4096 ,4096 }; + +if (setrlimit (RLIMIT_NOFILE , &rl) !=0 ) +perror ("setrlimit" ); +} +TEST_HARNESS_MAIN
Signature · 1 line
2.51.0
Geliang Tang
reviewerRFC v15 15/15 selftests: mptcp: cover mptcp tls tests
In reply to Geliang TangFrom: Geliang Tang <[email protected]>
The mptcp tests for tls.c is available now, this patch adds mptcp_tls.sh to test it in the MPTCP CI by default.
--- tools/testing/selftests/net/mptcp/.gitignore | 1 + tools/testing/selftests/net/mptcp/Makefile | 2 + tools/testing/selftests/net/mptcp/config | 5 ++ .../testing/selftests/net/mptcp/mptcp_tls.sh | 62 +++++++++++++++++++ tools/testing/selftests/net/mptcp/tls.c | 1 + 5 files changed, 71 insertions(+) create mode 100755 tools/testing/selftests/net/mptcp/mptcp_tls.sh create mode 120000 tools/testing/selftests/net/mptcp/tls.c
tools/testing/selftests/net/mptcp/.gitignore +1 -0
@@ -4,4 +4,5 @@ mptcp_diag mptcp_inq mptcp_sockopt pm_nl_ctl +tls *.pcap
tools/testing/selftests/net/mptcp/Makefile +2 -0
@@ -14,6 +14,7 @@ TEST_PROGS := \ mptcp_connect_splice.sh \ mptcp_join.sh \ mptcp_sockopt.sh \ + mptcp_tls.sh \ pm_netlink.sh \ simult_flows.sh \ userspace_pm.sh \
@@ -25,6 +26,7 @@ TEST_GEN_FILES := \ mptcp_inq \ mptcp_sockopt \ pm_nl_ctl \ + tls \ # end of TEST_GEN_FILES TEST_FILES := \
tools/testing/selftests/net/mptcp/config +5 -0
@@ -34,3 +34,8 @@ CONFIG_NFT_SOCKET=m CONFIG_NFT_TPROXY=m CONFIG_SYN_COOKIES=y CONFIG_VETH=y +CONFIG_TLS=m +CONFIG_CRYPTO_ARIA=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_SM4_GENERIC=m
tools/testing/selftests/net/mptcp/mptcp_tls.sh new file +62 -0
62 lines not on this page · raw message
tools/testing/selftests/net/mptcp/tls.c new file +1 -0
@@ -0,0 +1 @@ +../tls.c
Signature · 1 line
2.51.0
Hi Geliang,
Thank you for your modifications, that's great!
Our CI did some validations and here is its report:
- KVM Validation: normal (except selftest_mptcp_join): Success! ✅
- KVM Validation: normal (only selftest_mptcp_join): Success! ✅
- KVM Validation: debug (except selftest_mptcp_join): Success! ✅
- KVM Validation: debug (only selftest_mptcp_join): Success! ✅
- KVM Validation: btf-normal (only bpftest_all): Success! ✅
- KVM Validation: btf-debug (only bpftest_all): Success! ✅
- Task: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/24592108878
Initiator: Patchew Applier
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/eddd9cab992c
Patchwork: https://patchwork.kernel.org/project/mptcp/list/?series=1082710
If there are some issues, you can reproduce them using the same environment as the one used by the CI thanks to a docker image, e.g.:
$ cd [kernel source code]
$ docker run -v "${PWD}:${PWD}:rw" -w "${PWD}" --privileged --rm -it \
--pull always mptcp/mptcp-upstream-virtme-docker:latest \
auto-normalFor more details:
https://github.com/multipath-tcp/mptcp-upstream-virtme-docker
Please note that despite all the efforts that have been already done to have a stable tests suite when executed on a public CI like here, it is possible some reported issues are not due to your modifications. Still, do not hesitate to help us improve that ;-)
Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (NGI0 Core)