arm64: zynqmp: DT updates
Subsystems (2)
Michal Simek
maintainercover arm64: zynqmp: DT updates
Hi,
sending multiple patches to update DTs for ZynqMP targets to reflect the latest findings and updates.
Thanks,
Michal
Michal Simek (5):
arm64: zynqmp: Drop incorrect #phy-cells from ethernet-phy nodes
arm64: zynqmp: Use fixed-partitions for MTD
arm64: zynqmp: Add CMA reserved-memory for runtime FPGA loading
arm64: zynqmp: dts: Fix file descriptions to match actual filenames
arm64: zynqmp: Sync compatible string format
Rob Herring (Arm) (1):
arm64: dts: xilinx: Drop "label" property on dlg,slg7xl45106
Shaikh Mohammed Suhan (1):
arm64: zynqmp: add USB hub supply regulators
Trapti Damodar Balgi (2):
arm64: zynqmp-dlc21-revA: Update GPIO line names mapping
arm64: zynqmp-dlc21-revA: add mac nvmem cell for gem0
arch/arm/dts/zynqmp-dlc21-revA.dts | 17 +- arch/arm/dts/zynqmp-sc-revB.dts | 171 +++++++++--------- arch/arm/dts/zynqmp-sc-revC.dts | 1 - arch/arm/dts/zynqmp-sc-vek280-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vek280-revB.dtso | 5 +- arch/arm/dts/zynqmp-sc-vhk158-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk120-revB.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk180-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk180-revB.dtso | 7 +- arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 22 ++- arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 25 ++- arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 25 ++- arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 21 ++- arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 23 ++- arch/arm/dts/zynqmp-sm-k24-revA.dts | 7 +- arch/arm/dts/zynqmp-sm-k26-revA.dts | 11 +- .../zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts | 38 ++-- arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts | 14 +- arch/arm/dts/zynqmp-vpk120-revA.dts | 14 +- arch/arm/dts/zynqmp-zc1232-revA.dts | 55 ++++-- arch/arm/dts/zynqmp-zc1254-revA.dts | 53 ++++-- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 55 ++++-- arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 153 +++++++++------- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 124 +++++++------ arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 53 ++++-- arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 15 ++ arch/arm/dts/zynqmp-zcu100-revC.dts | 17 +- arch/arm/dts/zynqmp-zcu102-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu102-revB.dts | 1 - arch/arm/dts/zynqmp-zcu104-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu104-revC.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu106-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu111-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu1275-revA.dts | 53 ++++-- arch/arm/dts/zynqmp-zcu1275-revB.dts | 53 ++++-- arch/arm/dts/zynqmp-zcu1285-revA.dts | 15 ++ arch/arm/dts/zynqmp-zcu208-revA.dts | 16 +- arch/arm/dts/zynqmp-zcu216-revA.dts | 16 +- arch/arm/dts/zynqmp-zcu670-revA.dts | 18 +- arch/arm/dts/zynqmp-zcu670-revB.dts | 18 +- 40 files changed, 948 insertions(+), 468 deletions(-)
Signature · 4 lines
2.43.0 base-commit: e91911169bc737ee4a79963a1cba8db2aab7c1c0 branch: debian-sent3
Michal Simek
maintainerPATCH 1/9 arm64: zynqmp-dlc21-revA: Update GPIO line names mapping
From: Trapti Damodar Balgi <[email protected]>
Update the gpio-line-names property to reflect the latest GPIO mapping, including PMOD and VCCO labels.
---
arch/arm/dts/zynqmp-dlc21-revA.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/zynqmp-dlc21-revA.dts +4 -4
@@ -119,10 +119,10 @@ "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ "", "", /* 78 - 79 */ - "", "", "", "", "", /* 80 - 84 */ - "", "", "", "", "", /* 85 - 89 */ - "", "", "", "", "", /* 90 - 94 */ - "", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "", "", "", "", "PMOD_0", /* 80 - 84 */ + "PMOD_1", "PMOD_2", "PMOD_3", "PMOD_4", "PMOD_5", /* 85 -89 */ + "PMOD_6", "PMOD_7", "", "", "", /* 90 - 94 */ + "", "", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ "", "", "", "", "", /* 105 - 109 */ "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 2/9 arm64: zynqmp-dlc21-revA: add mac nvmem cell for gem0
In reply to Michal SimekFrom: Trapti Damodar Balgi <[email protected]>
Enable nvmem support for MAC address retrieval from EEPROM for ethernet@ff0b0000.
Add nvmem-cells and nvmem-cell-names to the GEM0 node, and define a mac-address@20 cell under the EEPROM node on I2C0.
This allows U-Boot to read the MAC address from EEPROM at offset 0x20.
---
arch/arm/dts/zynqmp-dlc21-revA.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/dts/zynqmp-dlc21-revA.dts +9 -0
@@ -90,6 +90,9 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + nvmem-cells = <ð_mac>; + nvmem-cell-names = "mac-address"; + mdio: mdio { #address-cells = <1>; #size-cells = <0>;
@@ -153,6 +156,12 @@ eeprom: eeprom@50 { /* u46 */ compatible = "atmel,24c32"; reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + + eth_mac: mac-address@20 { + reg = <0x20 0x6>; + }; }; /* u138 - TUSB320IRWBR - for USB-C */ };
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 3/9 arm64: zynqmp: Drop incorrect #phy-cells from ethernet-phy nodes
In reply to Michal SimekThe #phy-cells property is meant for generic PHY providers (Documentation/devicetree/bindings/phy/phy-bindings.txt) and is not a valid property for ethernet-phy nodes. Its presence triggers a dt-validate warning:
ethernet-phy@x (ethernet-phy-id001c.c816): Unevaluated properties are not allowed ('#phy-cells' was unexpected)
---
arch/arm/dts/zynqmp-sc-revB.dts | 1 - arch/arm/dts/zynqmp-sc-revC.dts | 1 - arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 1 - arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 2 -- arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 2 -- arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 1 - arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 1 - arch/arm/dts/zynqmp-zcu102-revA.dts | 1 - arch/arm/dts/zynqmp-zcu102-revB.dts | 1 - arch/arm/dts/zynqmp-zcu104-revA.dts | 1 - arch/arm/dts/zynqmp-zcu104-revC.dts | 1 - arch/arm/dts/zynqmp-zcu106-revA.dts | 1 - arch/arm/dts/zynqmp-zcu111-revA.dts | 1 - arch/arm/dts/zynqmp-zcu208-revA.dts | 1 - arch/arm/dts/zynqmp-zcu216-revA.dts | 1 - arch/arm/dts/zynqmp-zcu670-revA.dts | 1 - arch/arm/dts/zynqmp-zcu670-revB.dts | 1 - 17 files changed, 19 deletions(-)
arch/arm/dts/zynqmp-sc-revB.dts +0 -1
@@ -136,7 +136,6 @@ #size-cells = <0>; phy0: ethernet-phy@1 { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <1>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
arch/arm/dts/zynqmp-sc-revC.dts +0 -1
@@ -23,7 +23,6 @@ #size-cells = <0>; phy0: ethernet-phy@1 { /* ADI1300 */ - #phy-cells = <1>; compatible = "ethernet-phy-id0283.bc30"; reg = <1>; adi,rx-internal-delay-ps = <2400>;
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso +0 -1
@@ -148,7 +148,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@8 { /* Adin u31 */ - #phy-cells = <1>; compatible = "ethernet-phy-id0283.bc30"; reg = <8>; adi,rx-internal-delay-ps = <2000>;
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso +0 -2
@@ -265,7 +265,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@4 { /* u81 */ - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <4>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -277,7 +276,6 @@ reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; }; phy1: ethernet-phy@8 { /* u36 */ - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <8>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
arch/arm/dts/zynqmp-sck-kr-g-revB.dtso +0 -2
@@ -266,7 +266,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@4 { /* u81 */ - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <4>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -278,7 +277,6 @@ reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; }; phy1: ethernet-phy@8 { /* u36 */ - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <8>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
arch/arm/dts/zynqmp-sck-kv-g-revA.dtso +0 -1
@@ -209,7 +209,6 @@ #size-cells = <0>; phy0: ethernet-phy@1 { - #phy-cells = <1>; reg = <1>; compatible = "ethernet-phy-id2000.a231"; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso +0 -1
@@ -200,7 +200,6 @@ #size-cells = <0>; phy0: ethernet-phy@1 { - #phy-cells = <1>; reg = <1>; compatible = "ethernet-phy-id2000.a231"; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
arch/arm/dts/zynqmp-zcu102-revA.dts +0 -1
@@ -217,7 +217,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@21 { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <21>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu102-revB.dts +0 -1
@@ -19,7 +19,6 @@ phy-handle = <&phyc>; mdio: mdio { phyc: ethernet-phy@c { - #phy-cells = <0x1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu104-revA.dts +0 -1
@@ -126,7 +126,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu104-revC.dts +0 -1
@@ -131,7 +131,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu106-revA.dts +0 -1
@@ -217,7 +217,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; reg = <0xc>; compatible = "ethernet-phy-id2000.a231"; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu111-revA.dts +0 -1
@@ -189,7 +189,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu208-revA.dts +0 -1
@@ -176,7 +176,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu216-revA.dts +0 -1
@@ -183,7 +183,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu670-revA.dts +0 -1
@@ -185,7 +185,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
arch/arm/dts/zynqmp-zcu670-revB.dts +0 -1
@@ -185,7 +185,6 @@ #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@c { - #phy-cells = <1>; compatible = "ethernet-phy-id2000.a231"; reg = <0xc>; ti,rx-internal-delay = <0x8>;
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 4/9 arm64: zynqmp: Use fixed-partitions for MTD
In reply to Michal SimekDescribe flash and NAND MTD partitions using the fixed-partitions compatible under a dedicated partitions subnode. U-Boot only creates slave MTD devices from this binding in add_mtd_partitions_of(), so mtd list can show named partitions.
---
arch/arm/dts/zynqmp-sc-revB.dts | 170 +++++++++--------- .../zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts | 38 ++-- arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts | 14 +- arch/arm/dts/zynqmp-vpk120-revA.dts | 14 +- arch/arm/dts/zynqmp-zc1232-revA.dts | 40 +++-- arch/arm/dts/zynqmp-zc1254-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 38 ++-- arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 136 +++++++------- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 109 +++++------ arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 38 ++-- arch/arm/dts/zynqmp-zcu102-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zcu104-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zcu104-revC.dts | 38 ++-- arch/arm/dts/zynqmp-zcu106-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zcu111-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zcu1275-revA.dts | 38 ++-- arch/arm/dts/zynqmp-zcu1275-revB.dts | 38 ++-- 17 files changed, 491 insertions(+), 410 deletions(-)
arch/arm/dts/zynqmp-sc-revB.dts +87 -83
@@ -193,93 +193,97 @@ /* QSPI should also have PINCTRL setup */ flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <40000000>; /* 40MHz */ - partition@0 { - label = "Image Selector"; - reg = <0x0 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@80000 { - label = "Image Selector Golden"; - reg = <0x80000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@100000 { - label = "Persistent Register"; - reg = <0x100000 0x20000>; /* 128KB */ - }; - partition@120000 { - label = "Persistent Register Backup"; - reg = <0x120000 0x20000>; /* 128KB */ - }; - partition@140000 { - label = "Open_1"; - reg = <0x140000 0xc0000>; /* 768KB */ - }; - partition@200000 { - label = "Image A (FSBL, PMU, ATF, U-Boot)"; - reg = <0x200000 0xd00000>; /* 13MB */ - }; - partition@f00000 { - label = "ImgSel Image A Catch"; - reg = <0xf00000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@f80000 { - label = "Image B (FSBL, PMU, ATF, U-Boot)"; - reg = <0xf80000 0xd00000>; /* 13MB */ - }; - partition@1c80000 { - label = "ImgSel Image B Catch"; - reg = <0x1c80000 0x80000>; /* 512KB */ - read-only; - lock; - }; - partition@1d00000 { - label = "Open_2"; - reg = <0x1d00000 0x100000>; /* 1MB */ - }; - partition@1e00000 { - label = "Recovery Image"; - reg = <0x1e00000 0x200000>; /* 2MB */ - read-only; - lock; - }; - partition@2000000 { - label = "Recovery Image Backup"; - reg = <0x2000000 0x200000>; /* 2MB */ - read-only; - lock; - }; - partition@2200000 { - label = "U-Boot storage variables"; - reg = <0x2200000 0x20000>; /* 128KB */ - }; - partition@2220000 { - label = "U-Boot storage variables backup"; - reg = <0x2220000 0x20000>; /* 128KB */ - }; - partition@2240000 { - label = "SHA256"; - reg = <0x2240000 0x40000>; /* 256B but 256KB sector */ - read-only; - lock; - }; - partition@2280000 { - label = "Secure OS Storage"; - reg = <0x2280000 0x20000>; /* 128KB */ - }; - partition@22a0000 { - label = "User"; - reg = <0x22a0000 0x1d60000>; /* 29.375 MB */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Image Selector"; + reg = <0x0 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@80000 { + label = "Image Selector Golden"; + reg = <0x80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@100000 { + label = "Persistent Register"; + reg = <0x100000 0x20000>; /* 128KB */ + }; + partition@120000 { + label = "Persistent Register Backup"; + reg = <0x120000 0x20000>; /* 128KB */ + }; + partition@140000 { + label = "Open_1"; + reg = <0x140000 0xc0000>; /* 768KB */ + }; + partition@200000 { + label = "Image A (FSBL, PMU, ATF, U-Boot)"; + reg = <0x200000 0xd00000>; /* 13MB */ + }; + partition@f00000 { + label = "ImgSel Image A Catch"; + reg = <0xf00000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@f80000 { + label = "Image B (FSBL, PMU, ATF, U-Boot)"; + reg = <0xf80000 0xd00000>; /* 13MB */ + }; + partition@1c80000 { + label = "ImgSel Image B Catch"; + reg = <0x1c80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@1d00000 { + label = "Open_2"; + reg = <0x1d00000 0x100000>; /* 1MB */ + }; + partition@1e00000 { + label = "Recovery Image"; + reg = <0x1e00000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2000000 { + label = "Recovery Image Backup"; + reg = <0x2000000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2200000 { + label = "U-Boot storage variables"; + reg = <0x2200000 0x20000>; /* 128KB */ + }; + partition@2220000 { + label = "U-Boot storage variables backup"; + reg = <0x2220000 0x20000>; /* 128KB */ + }; + partition@2240000 { + label = "SHA256"; + reg = <0x2240000 0x40000>; /* 256B but 256KB sector */ + read-only; + lock; + }; + partition@2280000 { + label = "Secure OS Storage"; + reg = <0x2280000 0x20000>; /* 128KB */ + }; + partition@22a0000 { + label = "User"; + reg = <0x22a0000 0x1d60000>; /* 29.375 MB */ + }; }; }; };
arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts +21 -17
@@ -63,23 +63,27 @@ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <166000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "qspi-boot-bin"; - reg = <0x00000 0x60000>; - }; - partition@60000 { - label = "qspi-u-boot-itb"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "qspi-u-boot-env"; - reg = <0x160000 0x20000>; - }; - partition@200000 { - label = "qspi-rootfs"; - reg = <0x200000 0x1e00000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi-boot-bin"; + reg = <0x00000 0x60000>; + }; + partition@60000 { + label = "qspi-u-boot-itb"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "qspi-u-boot-env"; + reg = <0x160000 0x20000>; + }; + partition@200000 { + label = "qspi-rootfs"; + reg = <0x200000 0x1e00000>; + }; }; }; };
arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts +9 -5
@@ -88,15 +88,19 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* u285 - mt25qu512abb8e12 512Mib */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>; spi-tx-bus-width = <4>; /* maybe 4 here */ spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; - partition@0 { /* for testing purpose */ - label = "qspi"; - reg = <0 0x4000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi"; + reg = <0 0x4000000>; + }; }; }; };
arch/arm/dts/zynqmp-vpk120-revA.dts +9 -5
@@ -88,15 +88,19 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; - partition@0 { /* for testing purpose */ - label = "qspi"; - reg = <0 0x4000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi"; + reg = <0 0x4000000>; + }; }; }; };
arch/arm/dts/zynqmp-zc1232-revA.dts +22 -18
@@ -40,28 +40,32 @@ &qspi { status = "okay"; flash@0 { - compatible = "m25p80", "jedec,spi-nor"; /* 32MB FIXME */ - #address-cells = <1>; - #size-cells = <1>; + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zc1254-revA.dts +21 -17
@@ -42,27 +42,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +21 -17
@@ -357,28 +357,32 @@ num-cs = <2>; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>, <1>; parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +75 -61
177 lines not on this page · raw message
arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +58 -51
131 lines not on this page · raw message
arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +21 -17
@@ -174,27 +174,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu102-revA.dts +21 -17
@@ -986,28 +986,32 @@ num-cs = <2>; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>, <1>; parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu104-revA.dts +21 -17
@@ -452,27 +452,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu104-revC.dts +21 -17
@@ -464,27 +464,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu106-revA.dts +21 -17
@@ -980,28 +980,32 @@ num-cs = <2>; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>, <1>; parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu111-revA.dts +21 -17
@@ -803,28 +803,32 @@ num-cs = <2>; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0>, <1>; parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu1275-revA.dts +21 -17
@@ -46,27 +46,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
arch/arm/dts/zynqmp-zcu1275-revB.dts +21 -17
@@ -73,27 +73,31 @@ status = "okay"; flash@0 { compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ - #address-cells = <1>; - #size-cells = <1>; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@0 { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@100000 { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@600000 { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@620000 { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5e0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; }; }; };
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 5/9 arm64: zynqmp: Add CMA reserved-memory for runtime FPGA loading
In reply to Michal SimekAdd CMA (Contiguous Memory Allocator) reserved-memory regions to all Xilinx arm64 board device trees to support runtime FPGA programming.
The CMA pool uses dynamic allocation constrained to the low 2 GB DDR region via alloc-ranges so that the kernel places it within the 32-bit addressable space.
CMA sizes are chosen per silicon family to accommodate the maximum PL bitstream/PDI size:
- Kria K24 SOM: 64 MB
- ZynqMP boards: 128 MB
For Kria K24 SOM the CMA inherited from K26 is overridden to 64 MB. For Kria SOMs, the CMA node is added to the SOM DTS only, not to carrier board overlays.
---
arch/arm/dts/zynqmp-sm-k24-revA.dts | 7 ++++++- arch/arm/dts/zynqmp-sm-k26-revA.dts | 11 ++++++++++- arch/arm/dts/zynqmp-zc1232-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zc1254-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu100-revC.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu102-revA.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu104-revA.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu104-revC.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu106-revA.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu111-revA.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu1275-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu1275-revB.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu1285-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu208-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu216-revA.dts | 15 +++++++++++++++ arch/arm/dts/zynqmp-zcu670-revA.dts | 17 ++++++++++++++++- arch/arm/dts/zynqmp-zcu670-revB.dts | 17 ++++++++++++++++- 22 files changed, 326 insertions(+), 12 deletions(-)
arch/arm/dts/zynqmp-sm-k24-revA.dts +6 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP SM-K24 RevA * * (C) Copyright 2020 - 2021, Xilinx, Inc. - * (C) Copyright 2022, Advanced Micro Devices, Inc. + * (C) Copyright 2022-2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -21,3 +21,8 @@ reg = <0 0 0 0x80000000>; }; }; + +&cma { + size = <0x0 0x4000000>; + alignment = <0x0 0x4000000>; +};
arch/arm/dts/zynqmp-sm-k26-revA.dts +10 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A * * (C) Copyright 2020 - 2021, Xilinx, Inc. - * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc. + * (C) Copyright 2023 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -61,6 +61,15 @@ reg = <0x0 0x7ff00000 0x0 0x100000>; no-map; }; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; }; gpio-keys {
arch/arm/dts/zynqmp-zc1232-revA.dts +15 -0
@@ -31,6 +31,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &dcc {
arch/arm/dts/zynqmp-zc1254-revA.dts +15 -0
@@ -32,6 +32,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &dcc {
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * * (C) Copyright 2015 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -41,6 +41,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + clock_si5338_0: clk27 { /* u55 SI5338-GM */ compatible = "fixed-clock"; #clock-cells = <0>;
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * * (C) Copyright 2015 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -39,6 +39,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &can0 {
arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +15 -0
@@ -39,6 +39,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + clock_si5338_2: clk26 { compatible = "fixed-clock"; #clock-cells = <0>;
arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +15 -0
@@ -38,6 +38,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &can0 {
arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +15 -0
@@ -37,6 +37,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &fpd_dma_chan1 {
arch/arm/dts/zynqmp-zcu100-revC.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU100 revC * * (C) Copyright 2016 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> * Nathalie Chan King Choy
@@ -47,6 +47,21 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu102-revA.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU102 RevA * * (C) Copyright 2015 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -45,6 +45,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu104-revA.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU104 * * (C) Copyright 2017 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -43,6 +43,21 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + clock_8t49n287_5: clk125 { compatible = "fixed-clock"; #clock-cells = <0>;
arch/arm/dts/zynqmp-zcu104-revC.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU104 * * (C) Copyright 2017 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -43,6 +43,21 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + ina226 { compatible = "iio-hwmon"; io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
arch/arm/dts/zynqmp-zcu106-revA.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU106 * * (C) Copyright 2016 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -45,6 +45,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu111-revA.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU111 * * (C) Copyright 2017 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -45,6 +45,21 @@ /* Another 4GB connected to PL */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu1275-revA.dts +15 -0
@@ -32,6 +32,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &dcc {
arch/arm/dts/zynqmp-zcu1275-revB.dts +15 -0
@@ -35,6 +35,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &dcc {
arch/arm/dts/zynqmp-zcu1285-revA.dts +15 -0
@@ -36,6 +36,21 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; }; &dcc {
arch/arm/dts/zynqmp-zcu208-revA.dts +15 -0
@@ -43,6 +43,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu216-revA.dts +15 -0
@@ -43,6 +43,21 @@ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu670-revA.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU670 (67DR) * * (C) Copyright 2017 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -46,6 +46,21 @@ /* Another 4GB connected to PL */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
arch/arm/dts/zynqmp-zcu670-revB.dts +16 -1
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP ZCU670 (67DR) revB * * (C) Copyright 2017 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -46,6 +46,21 @@ /* Another 4GB connected to PL */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x8000000>; + alignment = <0x0 0x8000000>; + alloc-ranges = <0x0 0x0 0x0 0x80000000>; + linux,cma-default; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat;
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 6/9 arm64: zynqmp: add USB hub supply regulators
In reply to Michal SimekFrom: Shaikh Mohammed Suhan <[email protected]>
Add fixed supply regulators for the onboard USB hub (USB2744) used on Kria platforms.
The USB hub requires two always-on power rails:
- vdd: 3.3V main supply
- vdd2: auxiliary supply
Model these rails as fixed regulators and reference them from the hub node to accurately describe the hardware.
---
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 20 ++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 22 ++++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 22 ++++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 20 ++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 20 ++++++++++++++++++++ 5 files changed, 104 insertions(+)
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso +20 -0
@@ -50,6 +50,24 @@ gpio-controller; gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; }; + + vdd_usb_hub: regulator-vdd-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb_hub"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd2_usb_hub: regulator-vdd2-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd2_usb_hub"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &can0 {
@@ -124,6 +142,8 @@ peer-hub = <&hub_3_0>; i2c-bus = <&hub>; reset-gpios = <&slg_delay 0 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso +22 -0
@@ -85,6 +85,24 @@ gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>, <&slg7xl45106 4 GPIO_ACTIVE_LOW>; }; + + vdd_usb_hub: regulator-vdd-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb_hub"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd2_usb_hub: regulator-vdd2-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd2_usb_hub"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -196,6 +214,8 @@ peer-hub = <&hub_3_0>; i2c-bus = <&hub_1>; reset-gpios = <&slg_delay 0 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
@@ -233,6 +253,8 @@ peer-hub = <&hub1_3_0>; i2c-bus = <&hub_2>; reset-gpios = <&slg_delay 1 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
arch/arm/dts/zynqmp-sck-kr-g-revB.dtso +22 -0
@@ -86,6 +86,24 @@ gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>, <&slg7xl45106 4 GPIO_ACTIVE_LOW>; }; + + vdd_usb_hub: regulator-vdd-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb_hub"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd2_usb_hub: regulator-vdd2-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd2_usb_hub"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -197,6 +215,8 @@ peer-hub = <&hub_3_0>; i2c-bus = <&hub_1>; reset-gpios = <&slg_delay 0 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
@@ -234,6 +254,8 @@ peer-hub = <&hub1_3_0>; i2c-bus = <&hub_2>; reset-gpios = <&slg_delay 1 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
arch/arm/dts/zynqmp-sck-kv-g-revA.dtso +20 -0
@@ -85,6 +85,24 @@ gpio-controller; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; + + vdd_usb_hub: regulator-vdd-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb_hub"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd2_usb_hub: regulator-vdd2-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd2_usb_hub"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -169,6 +187,8 @@ reg = <1>; peer-hub = <&hub_3_0>; reset-gpios = <&slg_delay 0 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso +20 -0
@@ -81,6 +81,24 @@ gpio-controller; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; + + vdd_usb_hub: regulator-vdd-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb_hub"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd2_usb_hub: regulator-vdd2-usb-hub { + compatible = "regulator-fixed"; + regulator-name = "vdd2_usb_hub"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -156,6 +174,8 @@ peer-hub = <&hub_3_0>; i2c-bus = <&hub>; reset-gpios = <&slg_delay 0 10000 10000>; + vdd-supply = <&vdd_usb_hub>; + vdd2-supply = <&vdd2_usb_hub>; }; /* 3.0 hub on port 2 */
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 7/9 arm64: zynqmp: dts: Fix file descriptions to match actual filenames
In reply to Michal SimekFix descriptions that don't match their filenames:
- zynqmp-sc-vpk180-revB.dtso: described as revA instead of revB
- zynqmp-sck-kv-g-revB.dtso: described as revA instead of revB
---
arch/arm/dts/zynqmp-sc-vpk180-revB.dtso | 2 +- arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/zynqmp-sc-vpk180-revB.dtso +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * dts file for Xilinx ZynqMP VPK180 revA + * dts file for Xilinx ZynqMP VPK180 revB * * (C) Copyright 2021 - 2022, Xilinx, Inc. * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * dts file for KV260 revA Carrier Card + * dts file for KV260 revB Carrier Card * * (C) Copyright 2020 - 2022, Xilinx, Inc. * (C) Copyright 2022 - 2025, Advanced Micro Devices, Inc.
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 8/9 arm64: dts: xilinx: Drop "label" property on dlg, slg7xl45106
In reply to Michal SimekFrom: "Rob Herring (Arm)" <[email protected]>
The "label" property is not documented for the dlg,slg7xl45106. Nor is it common to use for GPIO controllers. So drop it.
---
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 1 - arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 1 - arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 1 - 3 files changed, 3 deletions(-)
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso +0 -1
@@ -94,7 +94,6 @@ slg7xl45106: gpio@11 { /* u13 - reset logic */ compatible = "dlg,slg7xl45106"; reg = <0x11>; - label = "resetchip"; gpio-controller; #gpio-cells = <2>; gpio-line-names = "USB0_PHY_RESET_B", "",
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso +0 -1
@@ -123,7 +123,6 @@ slg7xl45106: gpio@11 { /* u19 - reset logic */ compatible = "dlg,slg7xl45106"; reg = <0x11>; - label = "resetchip"; gpio-controller; #gpio-cells = <2>; gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
arch/arm/dts/zynqmp-sck-kr-g-revB.dtso +0 -1
@@ -124,7 +124,6 @@ slg7xl45106: gpio@11 { /* u19 - reset logic */ compatible = "dlg,slg7xl45106"; reg = <0x11>; - label = "resetchip"; gpio-controller; #gpio-cells = <2>; gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
Signature · 1 line
2.43.0
Michal Simek
maintainerPATCH 9/9 arm64: zynqmp: Sync compatible string format
In reply to Michal SimekThere is no reason to have non zynqmp-sc compatible string for overlays which can be applied only with SCs.
---
arch/arm/dts/zynqmp-sc-vek280-revA.dtso | 5 ++--- arch/arm/dts/zynqmp-sc-vek280-revB.dtso | 5 ++--- arch/arm/dts/zynqmp-sc-vhk158-revA.dtso | 5 ++--- arch/arm/dts/zynqmp-sc-vpk120-revB.dtso | 5 ++--- arch/arm/dts/zynqmp-sc-vpk180-revA.dtso | 5 ++--- arch/arm/dts/zynqmp-sc-vpk180-revB.dtso | 5 ++--- 6 files changed, 12 insertions(+), 18 deletions(-)
arch/arm/dts/zynqmp-sc-vek280-revA.dtso +2 -3
@@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP VEK280 revA * - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -13,8 +13,7 @@ /plugin/; &{/} { - compatible = "xlnx,zynqmp-sc-vek280-revA", "xlnx,zynqmp-vek280-revA", - "xlnx,zynqmp-vek280", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vek280-revA", "xlnx,zynqmp-sc-vek280", "xlnx,zynqmp"; vc7_xin: vc7-xin { compatible = "fixed-clock";
arch/arm/dts/zynqmp-sc-vek280-revB.dtso +2 -3
@@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP VEK280 revB * - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -10,6 +10,5 @@ #include "zynqmp-sc-vek280-revA.dtso" &{/} { - compatible = "xlnx,zynqmp-sc-vek280-revB", "xlnx,zynqmp-vek280-revB", - "xlnx,zynqmp-vek280", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vek280-revB", "xlnx,zynqmp-sc-vek280", "xlnx,zynqmp"; };
arch/arm/dts/zynqmp-sc-vhk158-revA.dtso +2 -3
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP VHK158 revA * * (C) Copyright 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -14,8 +14,7 @@ /plugin/; &{/} { - compatible = "xlnx,zynqmp-sc-vhk158-revA", "xlnx,zynqmp-vhk158-revA", - "xlnx,zynqmp-vhk158", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vhk158-revA", "xlnx,zynqmp-sc-vhk158", "xlnx,zynqmp"; vc7_xin: vc7-xin { compatible = "fixed-clock";
arch/arm/dts/zynqmp-sc-vpk120-revB.dtso +2 -3
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP VPK120 revB * * (C) Copyright 2021 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -14,8 +14,7 @@ /plugin/; &{/} { - compatible = "xlnx,zynqmp-sc-vpk120-revB", "xlnx,zynqmp-vpk120-revB", - "xlnx,zynqmp-vpk120", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vpk120-revB", "xlnx,zynqmp-sc-vpk120", "xlnx,zynqmp"; }; &i2c0 {
arch/arm/dts/zynqmp-sc-vpk180-revA.dtso +2 -3
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP VPK180 revA * * (C) Copyright 2021 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -14,8 +14,7 @@ /plugin/; &{/} { - compatible = "xlnx,zynqmp-sc-vpk180-revA", "xlnx,zynqmp-vpk180-revA", - "xlnx,zynqmp-vpk180", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vpk180-revA", "xlnx,zynqmp-sc-vpk180", "xlnx,zynqmp"; vc7_xin: vc7-xin { compatible = "fixed-clock";
arch/arm/dts/zynqmp-sc-vpk180-revB.dtso +2 -3
@@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP VPK180 revB * * (C) Copyright 2021 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2026, Advanced Micro Devices, Inc. * * Michal Simek <[email protected]> */
@@ -14,8 +14,7 @@ /plugin/; &{/} { - compatible = "xlnx,zynqmp-sc-vpk180-revB", "xlnx,zynqmp-vpk180-revB", - "xlnx,zynqmp-vpk180", "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-sc-vpk180-revB", "xlnx,zynqmp-sc-vpk180", "xlnx,zynqmp"; vc7_xin: vc7-xin { compatible = "fixed-clock";
Signature · 1 line
2.43.0
Quoted 59 lines · Michal Simek
Hi,
sending multiple patches to update DTs for ZynqMP targets to reflect the latest findings and updates.
Thanks,
MichalMichal Simek (5):
arm64: zynqmp: Drop incorrect #phy-cells from ethernet-phy nodes
arm64: zynqmp: Use fixed-partitions for MTD
arm64: zynqmp: Add CMA reserved-memory for runtime FPGA loading
arm64: zynqmp: dts: Fix file descriptions to match actual filenames
arm64: zynqmp: Sync compatible string formatRob Herring (Arm) (1):
arm64: dts: xilinx: Drop "label" property on dlg,slg7xl45106Shaikh Mohammed Suhan (1):
arm64: zynqmp: add USB hub supply regulatorsTrapti Damodar Balgi (2):
arm64: zynqmp-dlc21-revA: Update GPIO line names mapping
arm64: zynqmp-dlc21-revA: add mac nvmem cell for gem0arch/arm/dts/zynqmp-dlc21-revA.dts | 17 +- arch/arm/dts/zynqmp-sc-revB.dts | 171 +++++++++--------- arch/arm/dts/zynqmp-sc-revC.dts | 1 - arch/arm/dts/zynqmp-sc-vek280-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vek280-revB.dtso | 5 +- arch/arm/dts/zynqmp-sc-vhk158-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk120-revB.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk180-revA.dtso | 5 +- arch/arm/dts/zynqmp-sc-vpk180-revB.dtso | 7 +- arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 22 ++- arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 25 ++- arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 25 ++- arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 21 ++- arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 23 ++- arch/arm/dts/zynqmp-sm-k24-revA.dts | 7 +- arch/arm/dts/zynqmp-sm-k26-revA.dts | 11 +- .../zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts | 38 ++-- arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts | 14 +- arch/arm/dts/zynqmp-vpk120-revA.dts | 14 +- arch/arm/dts/zynqmp-zc1232-revA.dts | 55 ++++-- arch/arm/dts/zynqmp-zc1254-revA.dts | 53 ++++-- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 55 ++++-- arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 153 +++++++++------- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 124 +++++++------ arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 53 ++++-- arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 15 ++ arch/arm/dts/zynqmp-zcu100-revC.dts | 17 +- arch/arm/dts/zynqmp-zcu102-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu102-revB.dts | 1 - arch/arm/dts/zynqmp-zcu104-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu104-revC.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu106-revA.dts | 56 ++++-- arch/arm/dts/zynqmp-zcu111-revA.dts | 56 ++++--
Quoted 9 lines
arch/arm/dts/zynqmp-zcu1275-revA.dts | 53 ++++-- arch/arm/dts/zynqmp-zcu1275-revB.dts | 53 ++++-- arch/arm/dts/zynqmp-zcu1285-revA.dts | 15 ++ arch/arm/dts/zynqmp-zcu208-revA.dts | 16 +- arch/arm/dts/zynqmp-zcu216-revA.dts | 16 +- arch/arm/dts/zynqmp-zcu670-revA.dts | 18 +- arch/arm/dts/zynqmp-zcu670-revB.dts | 18 +- 40 files changed, 948 insertions(+), 468 deletions(-)
Applied.
M