Skip to contentSkip to conversation

and [libao-devel]

Bluez-users soraberri 3 participants 7 messages Dec 13, 2004 – Dec 14, 2004 Bluetooth drivers

lore
Share & tools
lore

soraberri

author
#0 lore raw

Hello folks,

If you are having troubles trying to install the bluetooth-alsa for headset support (http://bluetooth-alsa.sourceforge.net/) from a clean Fedora Core 3 installation, this may help you:

Following the build instructions from the page above I got this output from the ./configure script:
.
.
.

Quoted 7 lines

checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread checking for libasound headers version >= 1.0.3... found. checking for snd_ctl_open in -lasound... yes ./configure: line 3249: XIPH_PATH_AO: command not found
configure: creating ./config.status config.status: creating Makefile
config.status: creating sbc/Makefile

.
.
and the make process generates the following output+errors:

make all-recursive
make[1]: Entering directory `/home/lpeiro/btsco' Making all in sbc
make[2]: Entering directory `/home/lpeiro/btsco/sbc'
gcc -DHAVE_CONFIG_H -I. -I. -I.. @AO_CFLAGS@ -Wall -O2 -c sbclib.c
gcc: @AO_CFLAGS@: No such file or directory make[2]: *** [sbclib.o] Error 1
make[2]: Leaving directory /home/lpeiro/btsco/sbc' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory /home/lpeiro/btsco'
make: *** [all] Error 2

In order to have XIPH_PATH_AO available you will need libao-devel package installed. This can be found at www.rpmfind.net, for the fedora distribution. After that building process worked smoth for me.

Best regards

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi,

Quoted 33 lines

If you are having troubles trying to install the bluetooth-alsa for headset support (http://bluetooth-alsa.sourceforge.net/) from a clean Fedora Core 3 installation, this may help you:

Following the build instructions from the page above I got this output from the ./configure script:
.
.
.

Quoted 7 lines

checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread checking for libasound headers version >= 1.0.3... found. checking for snd_ctl_open in -lasound... yes ./configure: line 3249: XIPH_PATH_AO: command not found
configure: creating ./config.status config.status: creating Makefile
config.status: creating sbc/Makefile

.
.
and the make process generates the following output+errors:

make all-recursive
make[1]: Entering directory `/home/lpeiro/btsco' Making all in sbc
make[2]: Entering directory `/home/lpeiro/btsco/sbc'
gcc -DHAVE_CONFIG_H -I. -I. -I.. @AO_CFLAGS@ -Wall -O2 -c sbclib.c
gcc: @AO_CFLAGS@: No such file or directory make[2]: *** [sbclib.o] Error 1
make[2]: Leaving directory /home/lpeiro/btsco/sbc' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory /home/lpeiro/btsco'
make: *** [all] Error 2

Quoted 4 lines

In order to have XIPH_PATH_AO available you will need libao-devel package installed. This can be found at www.rpmfind.net, for the fedora distribution.
After that building process worked smoth for me.

we know and actually I already pointed this out in another thread you can find in the mailing list archive ;)

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

author
#2 lore raw
Quoted 47 lines · Marcel Holtmann

Hi,

Quoted 30 lines

If you are having troubles trying to install the bluetooth-alsa for headset support (http://bluetooth-alsa.sourceforge.net/) from a clean Fedora Core 3 installation, this may help you:

Following the build instructions from the page above I got this output from the ./configure script:
.
.
.

Quoted 7 lines

checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread checking for libasound headers version >= 1.0.3... found. checking for snd_ctl_open in -lasound... yes ./configure: line 3249: XIPH_PATH_AO: command not found
configure: creating ./config.status config.status: creating Makefile
config.status: creating sbc/Makefile

.
.
and the make process generates the following output+errors:

make all-recursive
make[1]: Entering directory `/home/lpeiro/btsco' Making all in sbc
make[2]: Entering directory `/home/lpeiro/btsco/sbc'
gcc -DHAVE_CONFIG_H -I. -I. -I.. @AO_CFLAGS@ -Wall -O2 -c sbclib.c
gcc: @AO_CFLAGS@: No such file or directory make[2]: *** [sbclib.o] Error 1
make[2]: Leaving directory /home/lpeiro/btsco/sbc' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory /home/lpeiro/btsco'
make: *** [all] Error 2

Quoted 2 lines

In order to have XIPH_PATH_AO available you will need libao-devel package installed. This can be found at www.rpmfind.net, for the fedora distribution. After that building process worked smoth for me.

we know and actually I already pointed this out in another thread you can find in the mailing list archive ;)

Regards

Marcel

Quoted 4 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/

Thanks Marcel,
sometimes if I knew what to look for, I wouldn't need to look for it. Anyway, I'm stick again: while inserting the module (modprobe snd_bt_sco) it says
FATAL: Module snd_bt_sco not found

Any step is a whole world for me, as you can see...

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

author
#3 lore raw

I actually con load sco (modprobe sco) but not snd_bt_sco as indicated in http://bluetooth-alsa.sourceforge.net/

Quoted 5 lines

Thanks Marcel,
sometimes if I knew what to look for, I wouldn't need to look for it. Anyway, I'm stick again: while inserting the module (modprobe snd_bt_sco) it says
FATAL: Module snd_bt_sco not found

Quoted 8 lines

Any step is a whole world for me, as you can see...

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#4 lore raw

Hi soraberri,

Quoted 2 lines

I actually con load sco (modprobe sco) but not snd_bt_sco as indicated in http://bluetooth-alsa.sourceforge.net/

modprobe just searches the regular directory (/lib/modules/uname -r) for the module. Try insmod /full/path/to/snd-bt-sco.ko instead.

Best regards,
Sebastian

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

author
#5 lore raw
Quoted 12 lines · Sebastian Roth

Hi soraberri,

Quoted 2 lines

I actually con load sco (modprobe sco) but not snd_bt_sco as indicated in http://bluetooth-alsa.sourceforge.net/

modprobe just searches the regular directory (/lib/modules/uname -r) for the module. Try insmod /full/path/to/snd-bt-sco.ko instead.

Best regards,
Sebastian

Quoted 4 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/

I migth be doing something wrong... It should be easier to load it. I've checked the path and the snd_bt_sco.ko file is placed at /lib/modules/uname -r/extra. Why in extra?

If I use insmod /lib/modules/uname -r/extra/snd_bt_sco.k, it claims for dependencies, and well, I have seen in some thread that someone just
use modprobe snd_bt_sco.

thanks sebastian

regards

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#6 lore raw

Hi,

Quoted 7 lines

I migth be doing something wrong... It should be easier to load it. I've checked the path and the snd_bt_sco.ko file is placed at /lib/modules/uname -r/extra. Why in extra?

If I use insmod /lib/modules/uname -r/extra/snd_bt_sco.k, it claims for dependencies, and well, I have seen in some thread that someone just
use modprobe snd_bt_sco.

after the "make install" maybe a "depmod -e" is needed.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users