Skip to contentSkip to conversation

xilinx-ml507.conf: fix u-boot config file

PATCH In review Adrian Alonso 2 participants 3 messages Feb 17, 2010 – Feb 19, 2010 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 xilinx-ml507.conf: fix u-boot config file

---
 conf/machine/xilinx-ml507.conf |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
conf/machine/xilinx-ml507.conf +1 -1
index 6194469..b2448e3 100644
@@ -19,7 +19,7 @@ MACHINE_FEATURES = "kernel26 ext2 usbhost udev"
 MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
 
 UBOOT_ARCH = "ppc"
-UBOOT_MACHINE = "ml507_defconfig"
+UBOOT_MACHINE = "ml507_config"
 
 # Xilinx EDK override hardware  definitions for xilinx-bsp
 # Include in your local.conf
Signature · 1 line
1.6.6
Acked-by on v1 1/1
#1 lore raw

Hello.

Quoted 1 line · Adrian Alonso

Applied on top of the oether and compile tested. (BTW, is this machine something like a successor of the ML310? Eventually I did some work on this in a lab at university to learn about software hardware co-design. :))

I'll wait 2-3 days more for feedback that the PowerPC guys may have and push them all afterwards if no problems arise.

regards
Stefan Schmidt

#2 lore raw

Yes the ML507 board is similar to the ML310 the only main difference is the processor version
ppc440 - ppc405 since they share the same bus processor (PLB) chances are that hardware designs
can be reused with minimal changes to be supported by the Linux kernel. At my lab university we are working on hardware/software co-design but we wan't to get rid off
xilinx linux bsp since they are based on old kernel version and have a considerable cost, that's way we consider
OE as flexible infrastructure that can be reused to make easier the co-design process.

Quoted 25 lines · Stefan Schmidt

Hello.

Quoted 1 line · Adrian Alonso

Applied on top of the oether and compile tested. (BTW, is this machine something
like a successor of the ML310? Eventually I did some work on this in a lab at
university to learn about software hardware co-design. :))

I'll wait 2-3 days more for feedback that the PowerPC guys may have and push
them all afterwards if no problems arise.

regards
Stefan Schmidt

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 3 lines
Saludos
Adrian Alonso
http://aalonso.wordpress.com