u-boot_git.bb: add xilinx ml507 support
PATCH v2 1/1 u-boot_git.bb: add xilinx ml507 support
* Based on xilinx official repos
* If a hardware project dir is set in local.conf XILINX_BSP_PATH
* it will over write xparameters header and append some canonical
* definitions. It also install u-boot elf executable for bare metal
* execution, early development stages.
--- recipes/u-boot/u-boot_git.bb | 21 ++++++++++++++++++++- 1 files changed, 20 insertions(+), 1 deletions(-)
recipes/u-boot/u-boot_git.bb +20 -1
@@ -1,5 +1,5 @@ require u-boot.inc -PR ="r42" +PR ="r43" FILESPATHPKG =. "u-boot-git:"
@@ -207,6 +207,9 @@ SRC_URI_append_c7x0 = "file://pdaXrom-u-boot.patch;patch=1 \ SRC_URI_sheevaplug = "git://git.denx.de/u-boot-marvell.git;protocol=git;branch=testing" SRCREV_sheevaplug = "119b9942da2e450d4e525fc004208dd7f7d062e0" +SRC_URI_xilinx-ml507 = "git://git.xilinx.com/u-boot-xlnx.git;protocol=git" +SRCREV_xilinx-ml507 = "26e999650cf77c16f33c580abaadab2532f5e8b2" + S = "${WORKDIR}/git"
@@ -237,3 +240,19 @@ do_deploy_prepend_mini2440() { do_deploy_prepend_micro2440() { cp ${S}/u-boot-nand16k.bin ${S}/u-boot.bin } + +do_configure_prepend_xilinx-ml507() { +if [ -e "${XILINX_BSP_PATH}/ppc440_0/include/xparameters.h" ]; then + cp ${XILINX_BSP_PATH}/ppc440_0/include/xparameters.h \ + ${S}/board/xilinx/ml507 + echo "#define XPAR_PLB_CLOCK_FREQ_HZ XPAR_CPU_PPC440_MPLB_FREQ_HZ +#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC440_CORE_CLOCK_FREQ_HZ +#define XPAR_PCI_0_CLOCK_FREQ_HZ 0" >> ${S}/board/xilinx/ml507/xparameters.h +fi +} + +do_deploy_prepend_xilinx-ml507() { +if [ -d "${XILINX_BSP_PATH}" ]; then + install ${S}/u-boot ${XILINX_BSP_PATH} +fi +}
Signature · 1 line
1.6.6.1
Hello.
Quoted 7 lines · Adrian Alonso
* Based on xilinx official repos
* If a hardware project dir is set in local.confXILINX_BSP_PATH
* it will over write xparameters header and append some canonical
* definitions. It also install u-boot elf executable for bare metal
* execution, early development stages.Signed-off-by Adrian Alonso <[email protected]>
Applied and pushed out.
regards
Stefan Schmidt
Thanks,
Quoted 21 lines · Stefan Schmidt
Hello.
Quoted 7 lines · Adrian Alonso
* Based on xilinx official repos
* If a hardware project dir is set in local.confXILINX_BSP_PATH
* it will over write xparameters header and append some canonical
* definitions. It also install u-boot elf executable for bare metal
* execution, early development stages.Signed-off-by Adrian Alonso <[email protected]>Applied and pushed out.
regards
Stefan Schmidt_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 3 lines
Saludos Adrian Alonso http://aalonso.wordpress.com