Skip to contentSkip to conversation

Baseband Packets

Bluez-devel Bruno Abinader 3 participants 6 messages Apr 16, 2005 – Apr 18, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello guys, now that I know that bluez supports all types of packets, i'm just wondering if it changes the packet type according to the sender/receiver devices supported packets info, and if it does, if it automatically selects the best packet type according to the enviroment, like in a file transfer, for example, according to the BER or other error factors. (e.g: DH5 when BER < 10^(-5), or DM1 when BER

Quoted 1 line

10^(-2)). Thanks!

--=20
Bruno de Oliveira Abinader
GVoIP - INdT/UFAM

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#1 lore raw

Hi Bruno,

Quoted 7 lines

now that I know that bluez supports all types of packets, i'm just wondering if it changes the packet type according to the sender/receiver devices supported packets info, and if it does, if it automatically selects the best packet type according to the enviroment, like in a file transfer, for example, according to the BER or other error factors. (e.g: DH5 when BER < 10^(-5), or DM1 when BER

Quoted 1 line

10^(-2)).

this is the job of the link manager and it is part of the Bluetooth chip and not a host stack like BlueZ.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#2 lore raw

Hi,

The spec says that: "Quality measurements in the receiver of one device can be used to dynamically control the packet type transmitted from the remote device for optimization of the data throughput."

The question is, is it done automatically or not? May we assume that LM is smart enough to measure the RF channel and based on it changes automatically the packet type ?

If not, is there any point in bluez that we can talk with LM?

Regards,

Quoted 20 lines · Marcel Holtmann

Hi Bruno,
=20

Quoted 7 lines

now that I know that bluez supports all types of packets, i'm just wondering if it changes the packet type according to the sender/receiver devices supported packets info, and if it does, if it automatically selects the best packet type according to the enviroment, like in a file transfer, for example, according to the BER or other error factors. (e.g: DH5 when BER < 10^(-5), or DM1 when BER

Quoted 1 line

10^(-2)).

=20
this is the job of the link manager and it is part of the Bluetooth chip and not a host stack like BlueZ.
=20
Regards
=20
Marcel
=20
=20
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide

Quoted 8 lines

Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
=20

--=20
Anderson Clayton B. Rodrigues
Eng. de Software
Instituto Nokia de Tecnologia - INdT

-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#3 lore raw

Hi Anderson,

Quoted 7 lines

The spec says that: "Quality measurements in the receiver of one device can be used to dynamically control the packet type transmitted from the remote device for optimization of the data throughput."

The question is, is it done automatically or not? May we assume that LM is smart enough to measure the RF channel and based on it changes automatically the packet type ?

the link manager should be smart enough, but choosing the right packet type is a science by itself.

Quoted 1 line

If not, is there any point in bluez that we can talk with LM?

We can only limit available packet types, but this makes no sense at all and should never be done.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#4 lore raw

Marcel,

I understand your arguments. But is It possible to interact with the LM by software? I mean, send PDUs ... Probably you have faced many many problems in order to build Bluez, and probably you have gained a huge experience and even you dont intend to implement it you have an idea of how i could start of doing it for academic porposes. Any help would be very welcome.

all the best,

Quoted 14 lines · Marcel Holtmann

Hi Anderson,
=20

Quoted 7 lines

The spec says that: "Quality measurements in the receiver of one device can be used to dynamically control the packet type transmitted from the remote device for optimization of the data throughput."

The question is, is it done automatically or not? May we assume that LM is smart enough to measure the RF channel and based on it changes automatically the packet type ?

=20
the link manager should be smart enough, but choosing the right packet type is a science by itself.
=20

Quoted 1 line

If not, is there any point in bluez that we can talk with LM?

Quoted 12 lines

=20
We can only limit available packet types, but this makes no sense at all and should never be done.
=20
Regards
=20
Marcel
=20
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime in=

fo,

Quoted 6 lines

new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
=20

--=20
Anderson Clayton B. Rodrigues
Eng. de Software
Instituto Nokia de Tecnologia - INdT

-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#5 lore raw

Hi Anderson,

Quoted 6 lines

I understand your arguments. But is It possible to interact with the LM by software? I mean, send PDUs ... Probably you have faced many many problems in order to build Bluez, and probably you have gained a huge experience and even you dont intend to implement it you have an idea of how i could start of doing it for academic porposes. Any help would be very welcome.

it is not possible to interact directly with the link manager. The only way is over HCI.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel