NVME-MI temperature sensors
Team,
I am trying to expose temperature sensor provided by NVME SSD drive. As per NVME-MI spec device provides temperature sensor value at defined register. Is there any Linux kernel driver, I need to enable to get these sensors of a SSD device we have. I see some NVME temperature sensors definition in meta-quanta/meta-gsj config.yaml and was wondering how are these read.
Any information on this would be helpful.
Regards
-Vijay
Quoted 5 lines · Vijay Khemka
Team,
I am trying to expose temperature sensor provided by NVME SSD drive. As per NVME-MI spec device provides temperature sensor value at defined register. Is there any Linux kernel driver, I need to enable to get these sensors of a SSD device we have. I see some NVME temperature sensors definition in meta-quanta/meta-gsj
config.yamland was wondering how are these read.Any information on this would be helpful.
This might be interesting to you: https://gerrit.openbmc-project.xyz/c/openbmc/dbus-sensors/+/20859
-James
Quoted 5 lines
Regards
-Vijay
Quoted 11 lines · James Feist
Quoted 9 lines · Vijay Khemka
Team,
I am trying to expose temperature sensor provided by NVME SSD drive. As per NVME-MI spec device provides temperature sensor value at defined register. Is there any Linux kernel driver, I need to enable to get these sensors of a SSD device we have. I see some NVME temperature sensors definition in meta-quanta/meta-gsj
config.yamland was wondering how are these read.
Quoted 5 lines
Quoted 1 line
Any information on this would be helpful.
This might be interesting to you:
https://gerrit.openbmc-project.xyz/c/openbmc/dbus-sensors/+/20859
That's the MCTP implementation which is the direction everything is moving towards.
In the short term, Quanta is working on a daemon[0] to monitor temperature and other telemetry data over NVMe-MI on SMBus. They have an implementation on their own GitHub[1] and are currently in the process of upstreaming it[2].
[0] https://github.com/openbmc/phosphor-nvme
[1] https://github.com/quanta-bmc/phosphor-nvme
[2] https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-nvme/+/22560
Quoted 8 lines
-James
Quoted 5 lines
Regards
-Vijay
Quoted 4 lines
Quoted 2 lines · James Feist
On 6/18/19 1:07 PM, Vijay Khemka wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Team,
I am trying to expose temperature sensor provided by NVME SSD drive. As per NVME-MI spec device provides temperature sensor value at defined register. Is there any Linux kernel driver, I need to enable to get these sensors of a SSD device we have. I see some NVME temperature sensors definition in meta-quanta/meta-gsj
config.yamland was wondering how are these read.
Hi Vijay,
Daemon[0] monitors the temperature and sets the value to the object path we created /xyz/openbmc_project/sensors/temperature/nvme(index). Once configured correctly in meta-quanta/meta-gsj config.yaml, it can read these temperatures via ipmi command.
Best Regards,
Tony
Quoted 27 lines
Quoted 6 lines
Quoted 2 lines
Any information on this would be helpful.
This might be interesting to you:
https://gerrit.openbmc-project.xyz/c/openbmc/dbus-sensors/+/20859That's the MCTP implementation which is the direction everything is moving towards.
In the short term, Quanta is working on a daemon[0] to monitor temperature and other telemetry data over NVMe-MI on SMBus. They have an implementation on their own GitHub[1] and are currently in the process of upstreaming it[2].
[0] https://github.com/openbmc/phosphor-nvme
[1] https://github.com/quanta-bmc/phosphor-nvme
[2] https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-nvme/+/22560Quoted 8 lines
-James
Quoted 5 lines
Regards
-Vijay