S390x: CPU Topology Information
v2 cover S390x: CPU Topology Information
Hi,
second version of the series with corrections.
When facility 11 is available inside the S390x architecture, 2 new instructions are available: PTF and STSI with function code 15.
Let's check their availability in QEMU/KVM and their coherence with the CPU topology provided by the QEMU -smp parameter.
To run these tests successfully you will need the Linux and the QEMU patches:
https://lkml.org/lkml/2021/8/3/201 https://lists.nongnu.org/archive/html/qemu-s390x/2021-07/msg00165.html
Regards,
Pierre
Pierre Morel (4):
s390x: lib: Add SCLP toplogy nested level
s390x: lib: Simplify stsi_get_fc and move it to library
s390x: topology: Check the Perform Topology Function
s390x: topology: Checking Configuration Topology Information
lib/s390x/asm/arch_def.h | 16 ++ lib/s390x/sclp.c | 6 + lib/s390x/sclp.h | 4 +- s390x/Makefile | 1 + s390x/stsi.c | 20 +-- s390x/topology.c | 307 +++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 4 + 7 files changed, 339 insertions(+), 19 deletions(-) create mode 100644 s390x/topology.c
Signature · 24 lines
2.25.1 Changelog: From V1: - Simplify the stsi_get_fc function when pushing it into lib (Janosch) - Simplify PTF inline assembly as PTF instruction does not use RRE second argument (Claudio) - Rename Test global name (Claudio, Janosch) - readibility, naming for PTF_REQ_* and removed unused globals (Janosch) - skipping tests which could fail when run on LPAR (Janosh) - Missing prefix_pop (Janosch)
PATCH v2 1/4 s390x: lib: Add SCLP toplogy nested level
The maximum CPU Topology nested level is available with the SCLP READ_INFO command inside the byte at offset 15 of the ReadInfo structure.
Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)
lib/s390x/sclp.c +6 -0
@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; } +int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm; +} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);
lib/s390x/sclp.h +3 -1
@@ -146,7 +146,8 @@ typedef struct ReadInfo {SCCBHeader h;uint16_t rnmax;uint8_t rnsize; -uint8_t _reserved1[16 -11 ];/* 11-15 */ +uint8_t _reserved1[15 -11 ];/* 11-14 */ +uint8_t stsi_parm;uint16_t entries_cpu;/* 16-17 */ uint16_t offset_cpu;/* 18-19 */ uint8_t _reserved2[24 -20 ];/* 20-23 */
@@ -322,6 +323,7 @@ void sclp_console_setup(void);void sclp_print (const char *str);void sclp_read_info (void );int sclp_get_cpu_num (void ); +int sclp_get_stsi_parm (void );CPUEntry *sclp_get_cpu_entries (void );void sclp_facilities_setup (void );int sclp_service_call (unsigned int command,void *sccb);
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v2 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 9 lines · Pierre Morel
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
Quoted 45 lines
--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)lib/s390x/sclp.c +6
-0@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; } +int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm; +} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);lib/s390x/sclp.h +3
-1@@ -146,7 +146,8 @@ typedef struct ReadInfo {SCCBHeader h;uint16_t rnmax;uint8_t rnsize; -uint8_t _reserved1[16 -11 ];/* 11-15 */ +uint8_t _reserved1[15 -11 ];/* 11-14 */ +uint8_t stsi_parm;uint16_t entries_cpu;/* 16-17 */ uint16_t offset_cpu;/* 18-19 */ uint8_t _reserved2[24 -20 ];/* 20-23 */ @@ -322,6 +323,7 @@ void sclp_console_setup(void);void sclp_print (const char *str);void sclp_read_info (void );int sclp_get_cpu_num (void ); +int sclp_get_stsi_parm (void );CPUEntry *sclp_get_cpu_entries (void );void sclp_facilities_setup (void );int sclp_service_call (unsigned int command,void *sccb);
Re: [kvm-unit-tests PATCH v2 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 5 lines · Janosch Frank
Quoted 4 lines · Pierre Morel
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.
Quoted 8 lines
Quoted 5 lines
Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>Reviewed-by Janosch Frank <[email protected]>
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v2 1/4] s390x: lib: Add SCLP toplogy nested level
In reply to Pierre MorelQuoted 19 lines · Pierre Morel
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)lib/s390x/sclp.c +0
-0
lib/s390x/sclp.c int sclp_get_cpu_num(void) · line 129
Quoted 7 lines
lib/s390x/sclp.c +4
-0@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; } +int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm;
Is this a generic "stsi parm", or always the concrete topology nested level? IOW, is that name good, or too generic?
Quoted 5 lines
lib/s390x/sclp.c +2
-0+} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);
Re: [kvm-unit-tests PATCH v2 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 24 lines · Cornelia Huck
Quoted 22 lines · Pierre Morel
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)lib/s390x/sclp.c +0
-0@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; }
Quoted 7 lines
lib/s390x/sclp.c int sclp_get_cpu_num(void) · line 129
Quoted 4 lines
lib/s390x/sclp.c +4
-0+int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm;Is this a generic "stsi parm", or always the concrete topology nested level? IOW, is that name good, or too generic?
It is the name used in the documentation, but for now only the 3 bits 5-7 are used for the maximum value of the selector 2 of the STSI instruction allowed by the machine.
Quoted 7 lines
Quoted 6 lines
lib/s390x/sclp.c +2
-0+} +CPUEntry *sclp_get_cpu_entries (void ) {assert (read_info);
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Cornelia Huck
Reviewed-byRe: [kvm-unit-tests PATCH v2 1/4] s390x: lib: Add SCLP toplogy nested level
Quoted 33 lines · Pierre Morel
Quoted 24 lines · Cornelia Huck
Quoted 22 lines · Pierre Morel
The maximum CPU Topology nested level is available with the SCLP
READ_INFOcommand inside the byte at offset 15 of the ReadInfo structure.Let's return this information to check the number of topology nested information available with the STSI 15.1.x instruction.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>--- lib/s390x/sclp.c | 6 ++++++ lib/s390x/sclp.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)lib/s390x/sclp.c +0
-0@@ -123,6 +123,12 @@ int sclp_get_cpu_num(void)return read_info->entries_cpu; }Quoted 7 lines
lib/s390x/sclp.c int sclp_get_cpu_num(void) · line 129
Quoted 4 lines
lib/s390x/sclp.c +4
-0+int sclp_get_stsi_parm (void ) +{ +assert (read_info); +return read_info->stsi_parm;Is this a generic "stsi parm", or always the concrete topology nested level? IOW, is that name good, or too generic?
Quoted 3 lines
It is the name used in the documentation, but for now only the 3 bits 5-7 are used for the maximum value of the selector 2 of the STSI instruction allowed by the machine.
Ok.
PATCH v2 2/4 s390x: lib: Simplify stsi_get_fc and move it to library
In reply to Pierre Morelstsi_get_fc is now needed in multiple tests.
As it does not need to store information but only returns the machine level, suppress the address parameter.
--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 20 ++------------------ 2 files changed, 18 insertions(+), 18 deletions(-)
lib/s390x/asm/arch_def.h +16 -0
@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)return cc; } +static inline unsigned long stsi_get_fc (void ) +{ + register unsigned long r0 asm("0") = 0; + register unsigned long r1 asm("1") = 0; +int cc; + + asmvolatile ("stsi 0\n" +"ipm %[cc]\n" +"srl %[cc],28\n" + :"+d" (r0), [cc]"=d" (cc) + :"d" (r1) + :"cc" ,"memory" ); +assert (!cc); +return r0 >>28 ; +} +static inline int servc (uint32_t command,unsigned long sccb) {int cc;
s390x/stsi.c +2 -18
@@ -71,28 +71,12 @@ static void test_priv(void)report_prefix_pop (); } -static inline unsigned long stsi_get_fc (void *addr) -{ - register unsigned long r0 asm("0") = 0; - register unsigned long r1 asm("1") = 0; -int cc; - - asmvolatile ("stsi 0(%[addr])\n" -"ipm %[cc]\n" -"srl %[cc],28\n" - :"+d" (r0), [cc]"=d" (cc) - :"d" (r1), [addr]"a" (addr) - :"cc" ,"memory" ); -assert (!cc); -return r0 >>28 ; -} -static void test_fc (void ) {report (stsi (pagebuf,7 ,0 ,0 ) ==3 ,"invalid fc" );report (stsi (pagebuf,1 ,0 ,1 ) ==3 ,"invalid selector 1" );report (stsi (pagebuf,1 ,1 ,0 ) ==3 ,"invalid selector 2" ); -report (stsi_get_fc (pagebuf) >=2 ,"query fc >= 2" ); +report (stsi_get_fc () >=2 ,"query fc >= 2" ); }static void test_3_2_2 (void )
@@ -112,7 +96,7 @@ static void test_3_2_2(void)report_prefix_push ("3.2.2" );/* Is the function code available at all? */ -if (stsi_get_fc (pagebuf) <3 ) { +if (stsi_get_fc () <3 ) {report_skip ("Running under lpar, no level 3 to test." ); goto out; }
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v2 2/4] s390x: lib: Simplify stsi_get_fc and move it to library
Quoted 7 lines · Pierre Morel
stsi_get_fcis now needed in multiple tests.As it does not need to store information but only returns the machine level, suppress the address parameter.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
Please push this one to devel for coverage:
Quoted 76 lines
--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 20 ++------------------ 2 files changed, 18 insertions(+), 18 deletions(-)lib/s390x/asm/arch_def.h +16
-0@@ -328,6 +328,22 @@ static inline int stsi(void *addr, int fc, int sel1, int sel2)return cc; } +static inline unsigned long stsi_get_fc (void ) +{ + register unsigned long r0 asm("0") = 0; + register unsigned long r1 asm("1") = 0; +int cc; + + asmvolatile ("stsi 0\n" +"ipm %[cc]\n" +"srl %[cc],28\n" + :"+d" (r0), [cc]"=d" (cc) + :"d" (r1) + :"cc" ,"memory" ); +assert (!cc); +return r0 >>28 ; +} +static inline int servc (uint32_t command,unsigned long sccb) {int cc;s390x/stsi.c +2
-18@@ -71,28 +71,12 @@ static void test_priv(void)report_prefix_pop (); } -static inline unsigned long stsi_get_fc (void *addr) -{ - register unsigned long r0 asm("0") = 0; - register unsigned long r1 asm("1") = 0; -int cc; - - asmvolatile ("stsi 0(%[addr])\n" -"ipm %[cc]\n" -"srl %[cc],28\n" - :"+d" (r0), [cc]"=d" (cc) - :"d" (r1), [addr]"a" (addr) - :"cc" ,"memory" ); -assert (!cc); -return r0 >>28 ; -} -static void test_fc (void ) {report (stsi (pagebuf,7 ,0 ,0 ) ==3 ,"invalid fc" );report (stsi (pagebuf,1 ,0 ,1 ) ==3 ,"invalid selector 1" );report (stsi (pagebuf,1 ,1 ,0 ) ==3 ,"invalid selector 2" ); -report (stsi_get_fc (pagebuf) >=2 ,"query fc >= 2" ); +report (stsi_get_fc () >=2 ,"query fc >= 2" ); }static void test_3_2_2 (void )@@ -112,7 +96,7 @@ static void test_3_2_2(void)report_prefix_push ("3.2.2" );/* Is the function code available at all? */ -if (stsi_get_fc (pagebuf) <3 ) { +if (stsi_get_fc () <3 ) {report_skip ("Running under lpar, no level 3 to test." ); goto out; }
Re: [kvm-unit-tests PATCH v2 2/4] s390x: lib: Simplify stsi_get_fc and move it to library
Quoted 12 lines · Janosch Frank
Quoted 7 lines · Pierre Morel
stsi_get_fcis now needed in multiple tests.As it does not need to store information but only returns the machine level, suppress the address parameter.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>Please push this one to devel for coverage:
Reviewed-by Janosch Frank <[email protected]>
Thanks and done,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v2 2/4] s390x: lib: Simplify stsi_get_fc and move it to library
In reply to Pierre MorelQuoted 11 lines · Pierre Morel
stsi_get_fcis now needed in multiple tests.As it does not need to store information but only returns the machine level, suppress the address parameter.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>--- lib/s390x/asm/arch_def.h | 16 ++++++++++++++++ s390x/stsi.c | 20 ++------------------ 2 files changed, 18 insertions(+), 18 deletions(-)
Re: [kvm-unit-tests PATCH v2 2/4] s390x: lib: Simplify stsi_get_fc and move it to library
Quoted 6 lines · Thomas Huth
Quoted 5 lines · Pierre Morel
stsi_get_fcis now needed in multiple tests.As it does not need to store information but only returns the machine level, suppress the address parameter.
Quoted 9 lines
Quoted 6 lines
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>---
lib/s390x/asm/arch_def.h| 16 ++++++++++++++++ s390x/stsi.c | 20 ++------------------2 files changed, 18 insertions(+), 18 deletions(-)Reviewed-by Thomas Huth <[email protected]>
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v2 3/4 s390x: topology: Check the Perform Topology Function
In reply to Pierre MorelWe check the PTF instruction.
- We do not expect to support vertical polarization.
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with PTF_CHECK function code is done as some code already did run a polarization change may have occur.
--- s390x/Makefile | 1 + s390x/topology.c | 99 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 103 insertions(+) create mode 100644 s390x/topology.c
s390x/Makefile +1 -0
@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)
s390x/topology.c new file +99 -0
99 lines not on this page · raw message
s390x/unittests.cfg +3 -0
@@ -109,3 +109,6 @@ file = edat.elf [mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Signature · 1 line
2.25.1
Re: [kvm-unit-tests PATCH v2 3/4] s390x: topology: Check the Perform Topology Function
Quoted 3 lines · Pierre Morel
We check the PTF instruction.
- We do not expect to support vertical polarization.
KVM does not support vertical polarization and we don't expect it to be added in the future?
Quoted 5 lines
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.
ENOPARSE
Quoted 80 lines
Signed-off-by Pierre Morel <[email protected]>--- s390x/Makefile | 1 + s390x/topology.c | 99 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ 3 files changed, 103 insertions(+) create mode 100644 s390x/topology.cs390x/Makefile +1
-0@@ -24,6 +24,7 @@ tests += $(TEST_DIR)/mvpg.elf tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf +tests += $(TEST_DIR)/topology.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) ifneq ($(HOST_KEY_DOCUMENT),)s390x/topology.c new file +53
-0@@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* CPU Topology +* +* Copyright (c) 2021 IBM Corp +* +* Authors: +* Pierre Morel <[email protected]> +*/ + +#include <libcflat.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/interrupt.h> +#include <asm/facility.h> +#include <smp.h> +#include <sclp.h> + +static int machine_level; + +#define PTF_REQ_HORIZONTAL 0 +#define PTF_REQ_VERTICAL 1 +#define PTF_REQ_CHECK 2 + +#define PTF_ERR_NO_REASON 0 +#define PTF_ERR_ALRDY_POLARIZED 1 +#define PTF_ERR_IN_PROGRESS 2 + +static int ptf (unsigned long fc,unsigned long *rc) +{ +int cc; + + asmvolatile ( +" .insn rre,0xb9a20000,%1,0\n" +" ipm %0\n" +" srl %0,28\n" + :"=d" (cc),"+d" (fc) + :"d" (fc) + :"cc" ); + + *rc = fc >>8 ; +return cc; +} + +static void test_ptf (void ) +{ +unsigned long rc; +int cc; + +report_prefix_push ("Topology Report pending" ); +/* +* At this moment the topology may already have changed +* since the VM has been started.
s390x/topology.c line 63
Quoted 10 lines
s390x/topology.c new file +10
-0+* However, we can test if a second PTF instruction +* reports that the topology did not change since the +* preceding PFT instruction. +*/ +ptf (PTF_REQ_CHECK , &rc); + cc =ptf (PTF_REQ_CHECK , &rc); +report (cc ==0 ,"PTF check clear" ); + +/* +* In the LPAR we can not assume the state of the polarizatiom
polarization
s390x/topology.c line 66
Quoted 3 lines
s390x/topology.c new file +3
-0+* at this moment. +* Let's skip the tests for LPAR. +*/
Any idea what happens on z/VM?
We don't necessarily need to support z/VM but we at least need to skip like we do on lpar :-)
Maybe also add a TODO, so we know we could improve the test?
s390x/topology.c line 69
Quoted 3 lines
s390x/topology.c new file +3
-0+if (machine_level <3 ) + goto end; +
Add comments:
We're always horizontally polarized in KVM.
s390x/topology.c line 73
Quoted 4 lines
s390x/topology.c new file +4
-0+ cc =ptf (PTF_REQ_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); +
KVM doesn't support vertical polarization.
s390x/topology.c line 76
Quoted 3 lines
s390x/topology.c new file +3
-0+ cc =ptf (PTF_REQ_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );
s/non/not/
Quoted 35 lines
s390x/topology.c new file +23
-0+ +end: +report_prefix_pop (); +} + +int main (int argc,char *argv[]) +{ +report_prefix_push ("CPU Topology" ); + +if (!test_facility (11 )) { +report_skip ("Topology facility not present" ); + goto end; + } + + machine_level =stsi_get_fc (); +report_info ("Machine level %d" , machine_level); + +test_ptf (); + +end: +report_prefix_pop (); +return report_summary (); +}s390x/unittests.cfg +3
-0@@ -109,3 +109,6 @@ file = edat.elf [mvpg-sie] file = mvpg-sie.elf + +[topology] +file = topology.elf
Re: [kvm-unit-tests PATCH v2 3/4] s390x: topology: Check the Perform Topology Function
Quoted 7 lines · Janosch Frank
Quoted 3 lines · Pierre Morel
We check the PTF instruction.
- We do not expect to support vertical polarization.
KVM does not support vertical polarization and we don't expect it to be added in the future?
OK
Quoted 8 lines
Quoted 6 lines
- We do not expect the Modified Topology Change Report to be pending or not at the moment the first PTF instruction with
PTF_CHECKfunction code is done as some code already did run a polarization change may have occur.ENOPARSE
OK I find another way to explain:
"
The Topology changes if the topology of the real CPUs backing the vCPUs changes. This can happen between the initialization of the VM and the start of the guest. As a consequence we can not expect the result of the first PTF instruction. "
...
Quoted 4 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ /* + * In the LPAR we can not assume the state of the polarizatiompolarization
yes
Quoted 8 lines
s390x/topology.c line 66
Quoted 4 lines
s390x/topology.c new file +3
-0+* at this moment. +* Let's skip the tests for LPAR. +*/ Any idea what happens on z/VM?
We don't necessarily need to support z/VM but we at least need to skip like we do on lpar :-)
No, I do not know.
Then OK we skip the test for zVM too
Quoted 9 lines
Maybe also add a TODO, so we know we could improve the test?
s390x/topology.c line 69
Quoted 3 lines
s390x/topology.c new file +3
-0+if (machine_level <3 ) + goto end; +Add comments:
We're always horizontally polarized in KVM.
OK
Quoted 7 lines
s390x/topology.c line 73
Quoted 5 lines
s390x/topology.c new file +4
-0+ cc =ptf (PTF_REQ_HORIZONTAL , &rc); +report (cc ==2 && rc ==PTF_ERR_ALRDY_POLARIZED , +"PTF horizontal already configured" ); +KVM doesn't support vertical polarization.
OK too
Quoted 6 lines
s390x/topology.c line 76
Quoted 4 lines
s390x/topology.c new file +3
-0+ cc =ptf (PTF_REQ_VERTICAL , &rc); +report (cc ==2 && rc ==PTF_ERR_NO_REASON , +"PTF vertical non possible" );s/non/not/
yes, seems I forgot to change this.
...
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v2 4/4 s390x: topology: Checking Configuration Topology Information
In reply to Pierre MorelSTSI with function code 15 is used to store the CPU configuration topology.
We check if the topology stored is coherent with the QEMU -smp parameters.
The current check is done on the number of CPUs, the maximum number of CPUs, the number of sockets and the number of cores per sockets.
--- s390x/topology.c | 208 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 1 + 2 files changed, 209 insertions(+)
s390x/topology.c +208 -0
@@ -17,6 +17,53 @@#include <sclp.h> static int machine_level; +static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2))); +static int mnest; +static long max_cpus; +static long cores; +static long sockets; +static long books; +static long drawers; +static long nodes; +static long ncpus; + +struct topology_core { +unsigned char nl; +unsigned char reserved0[3 ]; + unsigned char :5; +unsigned char d:1 ; +unsigned char pp:2 ; +unsigned char type; +unsigned short origin; +unsigned long mask; +}; + +struct topology_container { +unsigned char nl; +unsigned char reserved[6 ]; +unsigned char id; +}; + +union topology_entry { +unsigned char nl; +struct topology_core cpu; +struct topology_container container; +}; + +struct sysinfo_15_1_x { +unsigned char reserved0[2 ]; +unsigned short length; +unsigned char mag6; +unsigned char mag5; +unsigned char mag4; +unsigned char mag3; +unsigned char mag2; +unsigned char mag1; +unsigned char reserved1; +unsigned char mnest; +unsigned char reserved2[4 ]; +union topology_entry tle[0 ]; +};#define PTF_REQ_HORIZONTAL 0#define PTF_REQ_VERTICAL 1
@@ -79,10 +126,170 @@ end:report_prefix_pop (); } +static void check_sysinfo_15_1_x (struct sysinfo_15_1_x *info) +{ +struct topology_container *tc, *end; +struct topology_core *cpus; +int nb_nl0 =0 , nb_nl1 =0 , nb_nl2 =0 , nb_nl3 =0 ; + +if (mnest >5 ) +report (info->mag6 ==0 ,"topology level 6" ); +if (mnest >4 ) +report (info->mag5 == nodes,"Maximum number of nodes" ); +if (mnest >3 ) +report (info->mag4 == drawers,"Maximum number of drawers" ); +if (mnest >2 ) +report (info->mag3 == books,"Maximum number of books" ); + +/* Both levels 2 and 1 are always valid */ +report (info->mag2 == sockets,"Maximum number of sockets" ); +report (info->mag1 == cores,"Maximum number of cores" ); + + tc = (void *)&info->tle[0 ]; + end = (struct topology_container *)((unsigned long )info + info->length); + +while (tc < end) { +switch (tc->nl) { +case 3 : +report_info ("drawer: %d %d" , tc->nl, tc->id); + nb_nl3++; +break ; +case 2 : +report_info ("book : %d %d" , tc->nl, tc->id); + nb_nl2++; +break ; +case 1 : +report_info ("socket: %d %d" , tc->nl, tc->id); + nb_nl1++; +break ; +case 0 : + cpus = (struct topology_core *) tc; +report_info ("cpu type %02x d: %d pp: %d" , cpus->type, cpus->d, cpus->pp); +report_info ("origin : %04x mask %016lx" , cpus->origin, cpus->mask); + tc++; + nb_nl0++; +break ; +default : +report_abort ("Unexpected TL Entry: tle->nl: %d" , tc->nl); +return ; + } + tc++; + } +/* +* As we accept only 1 type of CPU, and only horizontal and dedicated CPUs +* We expect max_cpus / cores CPU entries +*/ +report (nb_nl0 == (1 + (ncpus -1 ) / cores), +"Check count of cores: %d %ld" , nb_nl0, ncpus / cores); +/* We expect the same count of sockets and CPU entries */ +report (nb_nl1 == nb_nl0,"Check count of sockets" ); +if (mnest >2 ) +report (nb_nl2 == nb_nl1 / sockets,"Checks count of books" ); +if (mnest >3 ) +report (nb_nl3 == nb_nl2 / books,"Checks count of drawers" ); +} + +static void test_stsi (void ) +{ +int ret; + + mnest =sclp_get_stsi_parm (); +/* If the STSI parm is 0, the maximum MNEST for STSI is 2 */ +if (!mnest) + mnest =2 ; +report_info ("SCLP MNEST : %d" , mnest); + + ret =sclp_get_cpu_num (); +report_info ("SCLP nb CPU: %d" , ret); + + ret =stsi (pagebuf,15 ,1 ,2 ); +report (!ret,"valid stsi 15.1.2" ); +if (!ret) +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); +else +report_info (" ret: %d" , ret); + +if (mnest <3 ) { +report (stsi (pagebuf,15 ,1 ,3 ) ==3 ,"invalid stsi 15.1.3" ); + }else { +report (stsi (pagebuf,15 ,1 ,3 ) ==0 ,"valid stsi 15.1.3" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <4 ) { +report (stsi (pagebuf,15 ,1 ,4 ) ==3 ,"invalid stsi 15.1.4" ); + }else { +report (stsi (pagebuf,15 ,1 ,4 ) ==0 ,"valid stsi 15.1.4" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <5 ) { +report (stsi (pagebuf,15 ,1 ,5 ) ==3 ,"invalid stsi 15.1.5" ); + }else { +report (stsi (pagebuf,15 ,1 ,5 ) ==0 ,"valid stsi 15.1.5" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } + +if (mnest <6 ) { +report (stsi (pagebuf,15 ,1 ,6 ) ==3 ,"invalid stsi 15.1.6" ); + }else { +report (stsi (pagebuf,15 ,1 ,6 ) ==0 ,"valid stsi 15.1.6" ); +check_sysinfo_15_1_x ((struct sysinfo_15_1_x *)pagebuf); + } +} + +static void parse_topology_args (int argc,char **argv) +{ +int i; + +for (i =1 ; i < argc; i++) { +if (!strcmp ("-c" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-c (cores) needs a parameter" ); + cores =atol (argv[i]); + }else if (!strcmp ("-s" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-s (sockets) needs a parameter" ); + sockets =atol (argv[i]); + }else if (!strcmp ("-b" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-b (books) needs a parameter" ); + books =atol (argv[i]); + }else if (!strcmp ("-d" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-d (drawers) needs a parameter" ); + drawers =atol (argv[i]); + }else if (!strcmp ("-n" , argv[i])) { + i++; +if (i >= argc) +report_abort ("-n (nodes) needs a parameter" ); + nodes =atol (argv[i]); + } + } +if (!cores) + cores =1 ; +if (!sockets) + sockets =1 ; +if (!books) + books =1 ; +if (!drawers) + drawers =1 ; +if (!nodes) + nodes =1 ; + max_cpus = cores * sockets * books * drawers * nodes; + ncpus =smp_query_num_cpus (); +} +int main (int argc,char *argv[]) {report_prefix_push ("CPU Topology" ); +parse_topology_args (argc, argv); +if (!test_facility (11 )) {report_skip ("Topology facility not present" ); goto end;
@@ -92,6 +299,7 @@ int main(int argc, char *argv[])report_info ("Machine level %d" , machine_level);test_ptf (); +test_stsi (); end:report_prefix_pop ();
s390x/unittests.cfg +1 -0
@@ -112,3 +112,4 @@ file = mvpg-sie.elf [topology] file = topology.elf +extra_params=-smp 5,sockets=4,cores=4,maxcpus=16 -append "-n 5 -s 4 -c 4 -m 16"
Signature · 1 line
2.25.1