Skip to contentSkip to conversation

arm/kvm: Enable support for KVM_ARM_VCPU_PMU_V3_FILTER

PATCH In review Shaoqin Huang 5 participants 13 messages Apr 9, 2024 – May 27, 2024 KVM

lore
Share & tools
lore
#0 lore raw

PATCH v9 1/1 arm/kvm: Enable support for KVM_ARM_VCPU_PMU_V3_FILTER

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

  # qemu-system-aarch64 \
        -accel kvm \
        -cpu host,kvm-pmu-filter="D:0x11-0x11"

Since the first action is deny, we have a global allow policy. This filters out the cycle counter (event 0x11 being CPU_CYCLES).

And then in guest, use the perf to count the cycle:

  # perf stat sleep 1

Performance counter stats for 'sleep 1':

              1.22 msec task-clock                       #    0.001 CPUs utilized
                 1      context-switches                 #  820.695 /sec
                 0      cpu-migrations                   #    0.000 /sec
                55      page-faults                      #   45.138 K/sec
   <not supported>      cycles
           1128954      instructions
            227031      branches                         #  186.323 M/sec
              8686      branch-misses                    #    3.83% of all branches
       1.002492480 seconds time elapsed

       0.001752000 seconds user
       0.000000000 seconds sys

As we can see, the cycle counter has been disabled in the guest, but other pmu events do still work.

---
v8->v9:
- Replace the warn_report to error_setg in some places.
- Merge the check condition to make code more clean.
- Try to use the QAPI format for the PMU Filter property but failed to use it since the -cpu option doesn't support json format yet.

v7->v8:
- Add qtest for kvm-pmu-filter.
- Do the kvm-pmu-filter syntax checking up-front in the kvm_pmu_filter_set() function. And store the filter information at there. When kvm_pmu_filter_get() reconstitute it.

v6->v7:
- Check return value of sscanf.
- Improve the check condition.

v5->v6:
- Commit message improvement.
- Remove some unused code.
- Collect Reviewed-by, thanks Sebastian.
- Use g_auto(Gstrv) to replace the gchar **. [Eric]

v4->v5:
- Change the kvm-pmu-filter as a -cpu sub-option. [Eric]
- Comment tweak. [Gavin]
- Rebase to the latest branch.

v3->v4:
- Fix the wrong check for pmu_filter_init. [Sebastian]
- Fix multiple alignment issue. [Gavin]
- Report error by warn_report() instead of error_report(), and don't use abort() since the PMU Event Filter is an add-on and best-effort feature.

                                                        [Gavin]

- Add several missing { } for single line of code. [Gavin]
- Use the g_strsplit() to replace strtok(). [Gavin]

v2->v3:
- Improve commits message, use kernel doc wording, add more explaination on
filter example, fix some typo error. [Eric]
- Add g_free() in kvm_arch_set_pmu_filter() to prevent memory leak. [Eric]
- Add more precise error message report. [Eric]
- In options doc, add pmu-filter rely on KVM_ARM_VCPU_PMU_V3_FILTER support in
KVM. [Eric]

v1->v2:
- Add more description for allow and deny meaning in
commit message. [Sebastian]
- Small improvement. [Sebastian]

---
 docs/system/arm/cpu-features.rst |  23 +++++++
 target/arm/arm-qmp-cmds.c        |   2 +-
 target/arm/cpu.h                 |   3 +
 target/arm/kvm.c                 | 112 +++++++++++++++++++++++++++++++
 tests/qtest/arm-cpu-features.c   |  51 ++++++++++++++
 5 files changed, 190 insertions(+), 1 deletion(-)
docs/system/arm/cpu-features.rst +23 -0
index a5fb929243..f3930f34b3 100644
@@ -204,6 +204,29 @@ the list of KVM VCPU features and their descriptions.
   the guest scheduler behavior and/or be exposed to the guest
   userspace.
 
+``kvm-pmu-filter``
+  By default kvm-pmu-filter is disabled. This means that by default all PMU
+  events will be exposed to guest.
+
+  KVM implements PMU Event Filtering to prevent a guest from being able to
+  sample certain events. It depends on the KVM_ARM_VCPU_PMU_V3_FILTER
+  attribute supported in KVM. It has the following format:
+
+  kvm-pmu-filter="{A,D}:start-end[;{A,D}:start-end...]"
+
+  The A means "allow" and D means "deny", start is the first event of the
+  range and the end is the last one. The first registered range defines
+  the global policy (global ALLOW if the first action is DENY, global DENY
+  if the first action is ALLOW). The start and end only support hexadecimal
+  format. For example:
+
+  kvm-pmu-filter="A:0x11-0x11;A:0x23-0x3a;D:0x30-0x30"
+
+  Since the first action is allow, we have a global deny policy. It
+  will allow event 0x11 (the cycle counter), events 0x23 to 0x3a are
+  also allowed except the event 0x30 which is denied, and all the other
+  events are denied.
+
 TCG VCPU Features
 =================
 
target/arm/arm-qmp-cmds.c +1 -1
index 3cc8cc738b..6ec1d3ea3c 100644
@@ -93,7 +93,7 @@ static const char *cpu_model_advertised_features[] = {
     "sve128", "sve256", "sve384", "sve512",
     "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280",
     "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048",
-    "kvm-no-adjvtime", "kvm-steal-time",
+    "kvm-no-adjvtime", "kvm-steal-time", "kvm-pmu-filter",
     "pauth", "pauth-impdef", "pauth-qarma3",
     NULL
 };
target/arm/cpu.h +3 -0
index bc0c84873f..996754a9a7 100644
@@ -943,6 +943,9 @@ struct ArchCPU {
 
     /* KVM steal time */
     OnOffAuto kvm_steal_time;
+
+    /* KVM PMU Filter */
+    GArray *kvm_pmu_filter;
 #endif /* CONFIG_KVM */
 
     /* Uniprocessor system with MP extensions */
target/arm/kvm.c +112 -0

136 lines not on this page · raw message

tests/qtest/arm-cpu-features.c +51 -0

102 lines not on this page · raw message

Signature · 1 line
2.40.1
#1 lore raw
Quoted 379 lines · Shaoqin Huang

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

   # qemu-system-aarch64 \
         -accel kvm \
         -cpu host,kvm-pmu-filter="D:0x11-0x11"

Since the first action is deny, we have a global allow policy. This filters out the cycle counter (event 0x11 being CPU_CYCLES).

And then in guest, use the perf to count the cycle:

   # perf stat sleep 1

Performance counter stats for 'sleep 1':

1.22 msec task-clock # 0.001 CPUs utilized
1 context-switches # 820.695 /sec
0 cpu-migrations # 0.000 /sec
55 page-faults # 45.138 K/sec
<not supported> cycles
1128954 instructions
227031 branches # 186.323 M/sec
8686 branch-misses # 3.83% of all branches

1.002492480 seconds time elapsed

0.001752000 seconds user
0.000000000 seconds sys

As we can see, the cycle counter has been disabled in the guest, but other pmu events do still work.

---
v8->v9:
- Replace the warn_report to error_setg in some places.
- Merge the check condition to make code more clean.
- Try to use the QAPI format for the PMU Filter property but failed to use it since the -cpu option doesn't support json format yet.

v7->v8:
- Add qtest for kvm-pmu-filter.
- Do the kvm-pmu-filter syntax checking up-front in the kvm_pmu_filter_set() function. And store the filter information at there. When kvm_pmu_filter_get() reconstitute it.

v6->v7:
- Check return value of sscanf.
- Improve the check condition.

v5->v6:
- Commit message improvement.
- Remove some unused code.
- Collect Reviewed-by, thanks Sebastian.
- Use g_auto(Gstrv) to replace the gchar **. [Eric]

v4->v5:
- Change the kvm-pmu-filter as a -cpu sub-option. [Eric]
- Comment tweak. [Gavin]
- Rebase to the latest branch.

v3->v4:
- Fix the wrong check for pmu_filter_init. [Sebastian]
- Fix multiple alignment issue. [Gavin]
- Report error by warn_report() instead of error_report(), and don't use abort() since the PMU Event Filter is an add-on and best-effort feature.

                                                         [Gavin]

- Add several missing { } for single line of code. [Gavin]
- Use the g_strsplit() to replace strtok(). [Gavin]

v2->v3:
- Improve commits message, use kernel doc wording, add more explaination on
filter example, fix some typo error. [Eric]
- Add g_free() in kvm_arch_set_pmu_filter() to prevent memory leak. [Eric]
- Add more precise error message report. [Eric]
- In options doc, add pmu-filter rely on KVM_ARM_VCPU_PMU_V3_FILTER support in
KVM. [Eric]

v1->v2:
- Add more description for allow and deny meaning in
commit message. [Sebastian]
- Small improvement. [Sebastian]

---
  docs/system/arm/cpu-features.rst |  23 +++++++
  target/arm/arm-qmp-cmds.c        |   2 +-
  target/arm/cpu.h                 |   3 +
  target/arm/kvm.c                 | 112 +++++++++++++++++++++++++++++++
  tests/qtest/arm-cpu-features.c   |  51 ++++++++++++++
  5 files changed, 190 insertions(+), 1 deletion(-)
docs/system/arm/cpu-features.rst +23 -0
index a5fb929243..f3930f34b3 100644
@@ -204,6 +204,29 @@ the list of KVM VCPU features and their descriptions.
    the guest scheduler behavior and/or be exposed to the guest
    userspace.
 
+``kvm-pmu-filter``
+  By default kvm-pmu-filter is disabled. This means that by default all PMU
+  events will be exposed to guest.
+
+  KVM implements PMU Event Filtering to prevent a guest from being able to
+  sample certain events. It depends on the KVM_ARM_VCPU_PMU_V3_FILTER
+  attribute supported in KVM. It has the following format:
+
+  kvm-pmu-filter="{A,D}:start-end[;{A,D}:start-end...]"
+
+  The A means "allow" and D means "deny", start is the first event of the
+  range and the end is the last one. The first registered range defines
+  the global policy (global ALLOW if the first action is DENY, global DENY
+  if the first action is ALLOW). The start and end only support hexadecimal
+  format. For example:
+
+  kvm-pmu-filter="A:0x11-0x11;A:0x23-0x3a;D:0x30-0x30"
+
+  Since the first action is allow, we have a global deny policy. It
+  will allow event 0x11 (the cycle counter), events 0x23 to 0x3a are
+  also allowed except the event 0x30 which is denied, and all the other
+  events are denied.
+
  TCG VCPU Features
  =================
 
target/arm/arm-qmp-cmds.c +1 -1
index 3cc8cc738b..6ec1d3ea3c 100644
@@ -93,7 +93,7 @@ static const char *cpu_model_advertised_features[] = {
      "sve128", "sve256", "sve384", "sve512",
      "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280",
      "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048",
-    "kvm-no-adjvtime", "kvm-steal-time",
+    "kvm-no-adjvtime", "kvm-steal-time", "kvm-pmu-filter",
      "pauth", "pauth-impdef", "pauth-qarma3",
      NULL
  };
target/arm/cpu.h +3 -0
index bc0c84873f..996754a9a7 100644
@@ -943,6 +943,9 @@ struct ArchCPU {
 
      /* KVM steal time */
      OnOffAuto kvm_steal_time;
+
+    /* KVM PMU Filter */
+    GArray *kvm_pmu_filter;
  #endif /* CONFIG_KVM */
 
      /* Uniprocessor system with MP extensions */
target/arm/kvm.c +112 -0
index ab85d628a8..7a363131fe 100644
@@ -496,6 +496,68 @@ static void kvm_steal_time_set(Object *obj, bool value, Error **errp)
      ARM_CPU(obj)->kvm_steal_time = value ? ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
  }
 
+static char *kvm_pmu_filter_get(Object *obj, Error **errp)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+    g_autoptr(GString) pmu_filter = g_string_new(NULL);
+    struct kvm_pmu_event_filter *filter;
+    char action;
+    int i;
+
+    if (!cpu->kvm_pmu_filter) {
+        return NULL;
+    }
+
+    for (i = 0; i < cpu->kvm_pmu_filter->len; i++) {
+        filter = &g_array_index(cpu->kvm_pmu_filter,
+                                struct kvm_pmu_event_filter, i);
+        if (i) {
+            g_string_append_c(pmu_filter, ';');
+        }
+        action = filter->action == KVM_PMU_EVENT_ALLOW ? 'A' : 'D';
+        g_string_append_printf(pmu_filter, "%c:0x%hx-0x%hx", action,
+                               filter->base_event,
+                               filter->base_event + filter->nevents - 1);
+    }
+
+    return g_strdup(pmu_filter->str);
+}
+
+static void kvm_pmu_filter_set(Object *obj, const char *pmu_filter,
+                               Error **errp)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+    struct kvm_pmu_event_filter filter;
+    g_auto(GStrv) event_filters;
+    int i;
+
+    if (cpu->kvm_pmu_filter) {
+        g_array_free(cpu->kvm_pmu_filter, true);
+    }
+
+    cpu->kvm_pmu_filter = g_array_new(false, false,
+                                      sizeof(struct kvm_pmu_event_filter));
+
+    event_filters = g_strsplit(pmu_filter, ";", -1);
+    for (i = 0; event_filters[i]; i++) {
+        unsigned short start = 0, end = 0;
+        char act;
+
+        if (sscanf(event_filters[i], "%c:%hx-%hx", &act, &start, &end) != 3 ||
+            (act != 'A' && act != 'D') || start > end) {
+            error_setg(errp, "Invalid PMU filter %s", event_filters[i]);
+            return;
+        }
+
+        filter.base_event = start;
+        filter.nevents = end - start + 1;
+        filter.action = (act == 'A') ? KVM_PMU_EVENT_ALLOW :
+                                       KVM_PMU_EVENT_DENY;
+
+        g_array_append_vals(cpu->kvm_pmu_filter, &filter, 1);
+    }
+}
+
  /* KVM VCPU properties should be prefixed with "kvm-". */
  void kvm_arm_add_vcpu_properties(ARMCPU *cpu)
  {
@@ -517,6 +579,12 @@ void kvm_arm_add_vcpu_properties(ARMCPU *cpu)
                               kvm_steal_time_set);
      object_property_set_description(obj, "kvm-steal-time",
                                      "Set off to disable KVM steal time.");
+
+    object_property_add_str(obj, "kvm-pmu-filter", kvm_pmu_filter_get,
+                            kvm_pmu_filter_set);
+    object_property_set_description(obj, "kvm-pmu-filter",
+                                    "PMU Event Filtering description for "
+                                    "guest PMU. (default: NULL, disabled)");
  }
 
  bool kvm_arm_pmu_supported(void)
@@ -1706,6 +1774,48 @@ static bool kvm_arm_set_device_attr(ARMCPU *cpu, struct kvm_device_attr *attr,
      return true;
  }
 
+static void kvm_arm_pmu_filter_init(ARMCPU *cpu)
+{
+    static bool pmu_filter_init;
+    struct kvm_device_attr attr = {
+        .group      = KVM_ARM_VCPU_PMU_V3_CTRL,
+        .attr       = KVM_ARM_VCPU_PMU_V3_FILTER,
+    };
+    int i;
+
+    /*
+     * The filter only needs to be initialized through one vcpu ioctl and it
+     * will affect all other vcpu in the vm.
+     * It can be referred from kernel commit d7eec2360e3 ("KVM: arm64: Add PMU
+     * event filtering infrastructure"):
+     * Although the ioctl is per-vcpu,  the map of allowed events is global to
+     * the VM (and can be setup from any vcpu until the vcpu PMU is
+     * initialized).
+     */
+    if (pmu_filter_init) {
+        return;
+    } else {
+        pmu_filter_init = true;
+    }
+
+    if (!cpu->kvm_pmu_filter) {
+        return;
+    }
+    if (kvm_vcpu_ioctl(CPU(cpu), KVM_HAS_DEVICE_ATTR, &attr)) {
+        error_report("KVM doesn't support the PMU Event Filter!");
+        return;
+    }
+
+    for (i = 0; i < cpu->kvm_pmu_filter->len; i++) {
+        attr.addr = (uint64_t)&g_array_index(cpu->kvm_pmu_filter,
+                                             struct kvm_pmu_event_filter, i);
+        if (!kvm_arm_set_device_attr(cpu, &attr, "PMU_V3_FILTER")) {
+            error_report("KVM set the PMU Event Filter failed!");
+            break;
+        }
+    }
+}
+
  void kvm_arm_pmu_init(ARMCPU *cpu)
  {
      struct kvm_device_attr attr = {
@@ -1716,6 +1826,8 @@ void kvm_arm_pmu_init(ARMCPU *cpu)
      if (!cpu->has_pmu) {
          return;
      }
+
+    kvm_arm_pmu_filter_init(cpu);
      if (!kvm_arm_set_device_attr(cpu, &attr, "PMU")) {
          error_report("failed to init PMU");
          abort();
tests/qtest/arm-cpu-features.c +36 -0
index 9d6e6190d5..0b99939af3 100644
@@ -127,6 +127,17 @@ static bool resp_get_feature(QDict *resp, const char *feature)
      return qdict_get_bool(props, feature);
  }
 
+static const char *resp_get_feature_str(QDict *resp, const char *feature)
+{
+    QDict *props;
+
+    g_assert(resp);
+    g_assert(resp_has_props(resp));
+    props = resp_get_props(resp);
+    g_assert(qdict_get(props, feature));
+    return qdict_get_str(props, feature);
+}
+
  #define assert_has_feature(qts, cpu_type, feature)                     \
  ({                                                                     \
      QDict *_resp = do_query_no_props(qts, cpu_type);                   \
@@ -156,6 +167,18 @@ static bool resp_get_feature(QDict *resp, const char *feature)
      g_assert(qdict_get_bool(_props, feature) == (expected_value));     \
  })
 
+#define resp_assert_feature_str(resp, feature, expected_value)         \
+({                                                                     \
+    QDict *_props;                                                     \
+                                                                       \
+    g_assert(_resp);                                                   \
+    g_assert(resp_has_props(_resp));                                   \
+    _props = resp_get_props(_resp);                                    \
+    g_assert(qdict_get(_props, feature));                              \
+    g_assert_cmpstr(qdict_get_str(_props, feature),                    \
+                    ==, (expected_value));                             \
+})
+
  #define assert_feature(qts, cpu_type, feature, expected_value)         \
  ({                                                                     \
      QDict *_resp;                                                      \
@@ -177,6 +200,17 @@ static bool resp_get_feature(QDict *resp, const char *feature)
      qobject_unref(_resp);                                              \
  })
 
+#define assert_set_feature_str(qts, cpu_type, feature, value)          \
+({                                                                     \
+    const char *_fmt = "{ %s: %s }";                                   \
+    QDict *_resp;                                                      \
+                                                                       \
+    _resp = do_query(qts, cpu_type, _fmt, feature, value);             \
+    g_assert(_resp);                                                   \
+    resp_assert_feature_str(_resp, feature, value);                    \
+    qobject_unref(_resp);                                              \
+})
+
  #define assert_has_feature_enabled(qts, cpu_type, feature)             \
      assert_feature(qts, cpu_type, feature, true)
 
@@ -462,6 +496,7 @@ static void test_query_cpu_model_expansion(const void *data)
 
      assert_has_not_feature(qts, "max", "kvm-no-adjvtime");
      assert_has_not_feature(qts, "max", "kvm-steal-time");
+    assert_has_not_feature(qts, "max", "kvm-pmu-filter");
 
      if (g_str_equal(qtest_get_arch(), "aarch64")) {
          assert_has_feature_enabled(qts, "max", "aarch64");
@@ -509,6 +544,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
      assert_set_feature(qts, "host", "kvm-no-adjvtime", false);
 
      if (g_str_equal(qtest_get_arch(), "aarch64")) {
+        const char *kvm_supports_pmu_filter;
          bool kvm_supports_steal_time;
          bool kvm_supports_sve;
          char max_name[8], name[8];

tests/qtest/arm-cpu-features.c static void test_query_cpu_model_expansion_kvm(const void *data) · line 586

Quoted 4 lines
tests/qtest/arm-cpu-features.c +1 -0
@@ -547,15 +583,29 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
           * because this instance of KVM doesn't support them. Test that the
           * features are present, and, when enabled, issue further tests.
           */
+        assert_has_feature(qts, "host", "kvm-pmu-filter");

So you assert here that the feature is available ...

tests/qtest/arm-cpu-features.c static void test_query_cpu_model_expansion_kvm(const void *data) · line 597

Quoted 11 lines
tests/qtest/arm-cpu-features.c +2 -0
          assert_has_feature(qts, "host", "kvm-steal-time");
          assert_has_feature(qts, "host", "sve");
 
          resp = do_query_no_props(qts, "host");
+        kvm_supports_pmu_filter = resp_get_feature_str(resp, "kvm-pmu-filter");
          kvm_supports_steal_time = resp_get_feature(resp, "kvm-steal-time");
          kvm_supports_sve = resp_get_feature(resp, "sve");
          vls = resp_get_sve_vls(resp);
          qobject_unref(resp);
 
+        if (kvm_supports_pmu_filter) {

... why do you then need to check for its availability here again?
I either don't understand this part of the code, or you could drop the kvm_supports_pmu_filter variable and simply always execute the code below.

Thomas

Quoted 22 lines
tests/qtest/arm-cpu-features.c +12 -0
+            assert_set_feature_str(qts, "host", "kvm-pmu-filter", "");
+            assert_set_feature_str(qts, "host", "kvm-pmu-filter",
+                                   "A:0x11-0x11");
+            assert_set_feature_str(qts, "host", "kvm-pmu-filter",
+                                   "D:0x11-0x11");
+            assert_set_feature_str(qts, "host", "kvm-pmu-filter",
+                                   "A:0x11-0x11;A:0x12-0x20");
+            assert_set_feature_str(qts, "host", "kvm-pmu-filter",
+                                   "D:0x11-0x11;A:0x12-0x20;D:0x12-0x15");
+        }
+
          if (kvm_supports_steal_time) {
              /* If we have steal-time then we should be able to toggle it. */
              assert_set_feature(qts, "host", "kvm-steal-time", false);
@@ -623,6 +673,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
          assert_has_not_feature(qts, "host", "pmu");
          assert_has_not_feature(qts, "host", "sve");
          assert_has_not_feature(qts, "host", "kvm-steal-time");
+        assert_has_not_feature(qts, "host", "kvm-pmu-filter");
      }
 
      qtest_quit(qts);
#2 lore raw

Hi Thmoas,

Quoted 14 lines · Thomas Huth
Quoted 1 line

+        assert_has_feature(qts, "host", "kvm-pmu-filter");

So you assert here that the feature is available ...

Quoted 10 lines

          assert_has_feature(qts, "host", "kvm-steal-time"); assert_has_feature(qts, "host", "sve");
          resp = do_query_no_props(qts, "host");
+        kvm_supports_pmu_filter = resp_get_feature_str(resp, "kvm-pmu-filter");
          kvm_supports_steal_time = resp_get_feature(resp, "kvm-steal-time"); kvm_supports_sve = resp_get_feature(resp, "sve");
          vls = resp_get_sve_vls(resp);
          qobject_unref(resp);
+        if (kvm_supports_pmu_filter) { >

Quoted 2 lines

... why do you then need to check for its availability here again?
I either don't understand this part of the code, or you could drop the kvm_supports_pmu_filter variable and simply always execute the code below.

Thanks for your reviewing. I did so because all other feature like "kvm-steal-time" check its availability again. I don't know the original reason why they did that. I just followed it.

Do you think we should delete all the checking?

Thanks,
Shaoqin

Quoted 3 lines

 Thomas

Signature · 1 line
Shaoqin
#3 lore raw
Quoted 17 lines · Shaoqin Huang

Hi Thmoas,

Quoted 14 lines · Thomas Huth
Quoted 1 line

+        assert_has_feature(qts, "host", "kvm-pmu-filter");

So you assert here that the feature is available ...

Quoted 10 lines

          assert_has_feature(qts, "host", "kvm-steal-time"); assert_has_feature(qts, "host", "sve");
          resp = do_query_no_props(qts, "host");
+        kvm_supports_pmu_filter = resp_get_feature_str(resp, "kvm-pmu-filter");
          kvm_supports_steal_time = resp_get_feature(resp, "kvm-steal-time"); kvm_supports_sve = resp_get_feature(resp, "sve");
          vls = resp_get_sve_vls(resp);
          qobject_unref(resp);
+        if (kvm_supports_pmu_filter) { >

Quoted 6 lines
Quoted 2 lines

... why do you then need to check for its availability here again?
I either don't understand this part of the code, or you could drop the kvm_supports_pmu_filter variable and simply always execute the code below.

Thanks for your reviewing. I did so because all other feature like "kvm-steal-time" check its availability again. I don't know the original reason why they did that. I just followed it.

Do you think we should delete all the checking?

resp_get_feature() seems to return a boolean value, so though these feature could be there, they still could be disabled, I assume? Thus we likely need to keep the check for those.

Thomas

#4 lore raw
Quoted 27 lines · Thomas Huth
Quoted 26 lines · Shaoqin Huang

Hi Thmoas,

Quoted 15 lines · Thomas Huth
Quoted 1 line

+        assert_has_feature(qts, "host", "kvm-pmu-filter");

So you assert here that the feature is available ...

Quoted 11 lines

          assert_has_feature(qts, "host", "kvm-steal-time"); assert_has_feature(qts, "host", "sve"); resp = do_query_no_props(qts, "host");
+        kvm_supports_pmu_filter = resp_get_feature_str(resp, "kvm-pmu-filter");
          kvm_supports_steal_time = resp_get_feature(resp, "kvm-steal-time");
          kvm_supports_sve = resp_get_feature(resp, "sve"); vls = resp_get_sve_vls(resp); qobject_unref(resp);
+        if (kvm_supports_pmu_filter) { >

Quoted 3 lines

... why do you then need to check for its availability here again? I either don't understand this part of the code, or you could drop the kvm_supports_pmu_filter variable and simply always execute the code below.

Thanks for your reviewing. I did so because all other feature like "kvm-steal-time" check its availability again. I don't know the original reason why they did that. I just followed it.

Quoted 5 lines
Quoted 1 line

Do you think we should delete all the checking?

resp_get_feature() seems to return a boolean value, so though these feature could be there, they still could be disabled, I assume? Thus we likely need to keep the check for those.

This had confused me as well when I looked at it the last time -- one thing is to check whether we have a certain prop in the cpu model, the other one whether we actually support it. Maybe this needs some comments?

#5 lore raw
In reply to Shaoqin Huang
Quoted 7 lines · Shaoqin Huang

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Quoted 6 lines

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

  # qemu-system-aarch64 \
        -accel kvm \
        -cpu host,kvm-pmu-filter="D:0x11-0x11"

I'm still against implementing this one-off custom parsed syntax for kvm-pmu-filter values. Once this syntax exists, we're locked into back-compatibility for multiple releases, and it will make a conversion to QAPI/JSON harder.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#6 lore raw

Hi Daniel,

Quoted 11 lines · Daniel P. Berrangé
Quoted 10 lines · Shaoqin Huang

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

Quoted 8 lines
Quoted 3 lines
   # qemu-system-aarch64 \
         -accel kvm \
         -cpu host,kvm-pmu-filter="D:0x11-0x11"

I'm still against implementing this one-off custom parsed syntax for kvm-pmu-filter values. Once this syntax exists, we're locked into back-compatibility for multiple releases, and it will make a conversion to QAPI/JSON harder.

Thanks for your effort of reviewing my patch. I think if I need cost more time about the QAPI, that's outside my initial idea and deviate from supporting the PMU Filter.

So I decide to not update this patch now. And wait until I have time to look into the QAPI or the -cpu option has been transformed to QAPI format.

Thanks,
Shaoqin

Quoted 3 lines

With regards,
Daniel

Signature · 1 line
Shaoqin
#7 lore raw
In reply to Daniel P. Berrangé

Hi Daniel & Shaoqin,

Since x86 also needs to implement PMU filter feature, though it uses the different KVM ioctl, we can still make the QEMU API as general as possible.

To move forward with both ARM and x86, I'd like to discuss my API thinking with you. ;-)

Quoted 16 lines · Daniel P. Berrangé

Date: Mon, 15 Apr 2024 18:29:25 +0100
From: "Daniel P. Berrangé" <[email protected]>
Subject: Re: [PATCH v9] arm/kvm: Enable support for
KVM_ARM_VCPU_PMU_V3_FILTER

Quoted 10 lines · Shaoqin Huang

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

Quoted 8 lines
Quoted 3 lines
  # qemu-system-aarch64 \
        -accel kvm \
        -cpu host,kvm-pmu-filter="D:0x11-0x11"

I'm still against implementing this one-off custom parsed syntax for kvm-pmu-filter values. Once this syntax exists, we're locked into back-compatibility for multiple releases, and it will make a conversion to QAPI/JSON harder.

Daniel, I understand you mean the new specific string format makes external API support more complicated, right?

What about the following options:

1. Firstly, add a feature flag option in "-cpu" to enable kvm_filter feature for CPU:

-cpu host,kvm-pmu-filter

2. Then use "-object kvm-pmu-event" to configure PMU event properties. Since x86's PMU filter has very complex encoding rules, we need the following three variants (one for general case, the other two are x86 specific):

- General format:
-object kvm-pmu-event,action=[allowed|denied],events=[event-list]

e.g, as Shaoqin's example,
-object kvm-pmu-event,action=allowed,events=0x11-0x11,0x23-0x23 -object kvm-pmu-event,action=denied,events=0x23-0x3a

- x86 raw_event encoding format (for single raw format event encoding):
-object kvm-pmu-event,action=[allowed|denied],mode=0,select="0x01",

          umask="0x3c",fixed-bitmap="0xffffffff"

- x86 masked_event encoding format (for mutiple masked event encoding):
-object kvm-pmu-event,action=[allowed|denied],mode=masked,select="0x01",

          mask="0x3c",match="0x11",exclude=true|false

The whole API architecture looks more complex, but has the advantage of being as general as possible and avoiding the introduction of new string format parsing.

What do you think? Because the most important thing about this feature is the API design, welcome your comments!

Regards,
Zhao

#8 lore raw
Quoted 63 lines · Zhao Liu

Hi Daniel & Shaoqin,

Since x86 also needs to implement PMU filter feature, though it uses the different KVM ioctl, we can still make the QEMU API as general as possible.

To move forward with both ARM and x86, I'd like to discuss my API thinking with you. ;-)

Quoted 16 lines · Daniel P. Berrangé

Date: Mon, 15 Apr 2024 18:29:25 +0100
From: "Daniel P. Berrangé" <[email protected]>
Subject: Re: [PATCH v9] arm/kvm: Enable support for
KVM_ARM_VCPU_PMU_V3_FILTER

Quoted 10 lines · Shaoqin Huang

The KVM_ARM_VCPU_PMU_V3_FILTER provides the ability to let the VMM decide which PMU events are provided to the guest. Add a new option kvm-pmu-filter as -cpu sub-option to set the PMU Event Filtering. Without the filter, all PMU events are exposed from host to guest by default. The usage of the new sub-option can be found from the updated document (docs/system/arm/cpu-features.rst).

Here is an example which shows how to use the PMU Event Filtering, when we launch a guest by use kvm, add such command line:

Quoted 8 lines
Quoted 3 lines
  # qemu-system-aarch64 \
        -accel kvm \
        -cpu host,kvm-pmu-filter="D:0x11-0x11"

I'm still against implementing this one-off custom parsed syntax for kvm-pmu-filter values. Once this syntax exists, we're locked into back-compatibility for multiple releases, and it will make a conversion to QAPI/JSON harder.

Daniel, I understand you mean the new specific string format makes external API support more complicated, right?

What about the following options:

1. Firstly, add a feature flag option in "-cpu" to enable kvm_filter feature for CPU:

-cpu host,kvm-pmu-filter

2. Then use "-object kvm-pmu-event" to configure PMU event properties. Since x86's PMU filter has very complex encoding rules, we need the following three variants (one for general case, the other two are x86 specific):

- General format:
-object kvm-pmu-event,action=[allowed|denied],events=[event-list]

e.g, as Shaoqin's example,
-object kvm-pmu-event,action=allowed,events=0x11-0x11,0x23-0x23 -object kvm-pmu-event,action=denied,events=0x23-0x3a

- x86 raw_event encoding format (for single raw format event encoding):
-object kvm-pmu-event,action=[allowed|denied],mode=0,select="0x01",

          umask="0x3c",fixed-bitmap="0xffffffff"

- x86 masked_event encoding format (for mutiple masked event encoding):
-object kvm-pmu-event,action=[allowed|denied],mode=masked,select="0x01",

Quoted 8 lines
          mask="0x3c",match="0x11",exclude=true|false

The whole API architecture looks more complex, but has the advantage of being as general as possible and avoiding the introduction of new string format parsing.

What do you think? Because the most important thing about this feature is the API design, welcome your comments!

Please describe it in terms of a QAPI definition, as that's what we're striving for with all QEMU public interfaces. Once the QAPI design is agreed, then the -object mapping is trivial, as -object's JSON format supports arbitrary QAPI structures.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#9 lore raw

Hi Daniel,

Quoted 4 lines

Please describe it in terms of a QAPI definition, as that's what we're striving for with all QEMU public interfaces. Once the QAPI design is agreed, then the -object mapping is trivial, as -object's JSON format supports arbitrary QAPI structures.

Thank you for your guidance!

I rethought and and modified my previous proposal:

Let me show the command examples firstly:
* Add a single event:

    (x86) -object kvm-pmu-event,id=e0,action=allow,format=x86-default,\
                  select=0x3c,umask=0x00
    (arm or general) -object kvm-pmu-event,id=e1,action=deny,\
                             format=raw,code=0x01

* Add a counter bitmap:

    (x86) -object kvm-pmu-counter,id=cnt,action=allow,type=x86-fixed,\
                  bitmap=0xffff0000

* Add an event list (must use Json syntax format):
(x86) -object '{"qom-type":"kvm-pmu-event-list","id"="filter0","action"="allow","format"="x86-default","events=[{"select"=0x3c,"umask"=0x00},{"select"=0x2e,"umask"=0x4f}]' (arm) -object '{"qom-type":"kvm-pmu-event-list","id"="filter1","action"="allow","format"="raw","events"=[{"code"=0x01},{"code"=0x02}]'

The specific JSON definitions are as follows (IIUC, this is "in terms of a QAPI definition", right? ;-)):
* Define PMU event and counter bitmap with JSON format:
- basic filter action:

{ 'enum': 'KVMPMUFilterAction',

    'prefix': 'KVM_PMU_FILTER_ACTION',
    'data': ['deny', 'allow' ] }

- PMU counter:

{ 'enum': 'KVMPMUCounterType',

    'prefix': 'KVM_PMU_COUNTER_TYPE',
    'data': [ 'x86-fixed' ] }

{ 'struct': 'KVMPMUX86FixedCounter',

    'data': { 'bitmap': 'uint32' } }

- PMU events (total 3 formats):

# 3 encoding formats: "raw" is compatible with shaoqin's ARM format as

  # well as the x86 raw format, and could support other architectures in
  # the future.
  { 'enum': 'KVMPMUEventEncodeFmt',
    'prefix': 'KVM_PMU_EVENT_ENCODE_FMT',
    'data': ['raw', 'x86-default', 'x86-masked-entry' ] }

# A general format.
{ 'struct': 'KVMPMURawEvent',

    'data': { 'code': 'uint64' } }
  # x86-specific
  { 'struct': 'KVMPMUX86DefalutEvent',
    'data': { 'select': 'uint16',
              'umask': 'uint16' } }
  # another x86 specific
  { 'struct': 'KVMPMUX86MaskedEntry',
    'data': { 'select': 'uint16',
              'match': 'uint8',
              'mask': 'uint8',
              'exclude': 'bool' } }

# And their list wrappers:
{ 'struct': 'KVMPMURawEventList',

    'data': { 'events': ['KVMPMURawEvent'] } }

{ 'struct': 'KVMPMUX86DefalutEventList',

    'data': { 'events': ['KVMPMUX86DefalutEvent'] } }

{ 'struct': 'KVMPMUX86MaskedEntryList',

    'data': { 'events': ['KVMPMUX86MaskedEntryList'] } }

Based on the above basic structs, we could provide 3 new more qom-types:
- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This is a single object option to configure PMU counter

  # bitmap filter.
  { 'union': 'KVMPMUFilterCounter',
    'base': { 'action': 'KVMPMUFilterAction',
              'type': 'KVMPMUCounterType' },
    'discriminator': 'type',
    'data': { 'x86-fixed': 'KVMPMUX86FixedCounter' } }

- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This option is used to configure a single PMU event for # PMU filter.
{ 'union': 'KVMPMUFilterEvent',

    'base': { 'action': 'KVMPMUFilterAction',
              'format': 'KVMPMUEventEncodeFmt' },
    'discriminator': 'format',
    'data': { 'raw': 'KVMPMURawEvent',
              'x86-default': 'KVMPMUX86DefalutEvent',
              'x86-masked-entry': 'KVMPMUX86MaskedEntry' } }

- 'kvm-pmu-event-list': 'KVMPMUFilterEventList'

# Used to configure multiple events.
{ 'union': 'KVMPMUFilterEventList',

    'base': { 'action': 'KVMPMUFilterAction',
              'format': 'KVMPMUEventEncodeFmt' },
    'discriminator': 'format',
    'data': { 'raw': 'KVMPMURawEventList',
              'x86-default': 'KVMPMUX86DefalutEventList',
              'x86-masked-entry': 'KVMPMUX86MaskedEntryList' } }

Compared to Shaoqin's original format, kvm-pmu-event-list is not able to enumerate events continuously (similar to 0x00-0x30 before), and now user must enumerate events one by one individually.

What do you think about the above 3 new commands?

Thanks and Best Regards,
Zhao

#10 lore raw
Quoted 118 lines · Zhao Liu

Hi Daniel,

Quoted 4 lines

Please describe it in terms of a QAPI definition, as that's what we're striving for with all QEMU public interfaces. Once the QAPI design is agreed, then the -object mapping is trivial, as -object's JSON format supports arbitrary QAPI structures.

Thank you for your guidance!

I rethought and and modified my previous proposal:

Let me show the command examples firstly:
* Add a single event:

    (x86) -object kvm-pmu-event,id=e0,action=allow,format=x86-default,\
                  select=0x3c,umask=0x00
    (arm or general) -object kvm-pmu-event,id=e1,action=deny,\
                             format=raw,code=0x01

* Add a counter bitmap:

    (x86) -object kvm-pmu-counter,id=cnt,action=allow,type=x86-fixed,\
                  bitmap=0xffff0000

* Add an event list (must use Json syntax format):

   (x86) -object '{"qom-type":"kvm-pmu-event-list","id"="filter0","action"="allow","format"="x86-default","events=[{"select"=0x3c,"umask"=0x00},{"select"=0x2e,"umask"=0x4f}]'
   (arm) -object '{"qom-type":"kvm-pmu-event-list","id"="filter1","action"="allow","format"="raw","events"=[{"code"=0x01},{"code"=0x02}]'

The specific JSON definitions are as follows (IIUC, this is "in terms of a QAPI definition", right? ;-)):
* Define PMU event and counter bitmap with JSON format:
- basic filter action:

{ 'enum': 'KVMPMUFilterAction',

    'prefix': 'KVM_PMU_FILTER_ACTION',
    'data': ['deny', 'allow' ] }

- PMU counter:

{ 'enum': 'KVMPMUCounterType',

    'prefix': 'KVM_PMU_COUNTER_TYPE',
    'data': [ 'x86-fixed' ] }

{ 'struct': 'KVMPMUX86FixedCounter',

    'data': { 'bitmap': 'uint32' } }

- PMU events (total 3 formats):

# 3 encoding formats: "raw" is compatible with shaoqin's ARM format as

  # well as the x86 raw format, and could support other architectures in
  # the future.
  { 'enum': 'KVMPMUEventEncodeFmt',
    'prefix': 'KVM_PMU_EVENT_ENCODE_FMT',
    'data': ['raw', 'x86-default', 'x86-masked-entry' ] }

# A general format.
{ 'struct': 'KVMPMURawEvent',

    'data': { 'code': 'uint64' } }
  # x86-specific
  { 'struct': 'KVMPMUX86DefalutEvent',
    'data': { 'select': 'uint16',
              'umask': 'uint16' } }
  # another x86 specific
  { 'struct': 'KVMPMUX86MaskedEntry',
    'data': { 'select': 'uint16',
              'match': 'uint8',
              'mask': 'uint8',
              'exclude': 'bool' } }

# And their list wrappers:
{ 'struct': 'KVMPMURawEventList',

    'data': { 'events': ['KVMPMURawEvent'] } }

{ 'struct': 'KVMPMUX86DefalutEventList',

    'data': { 'events': ['KVMPMUX86DefalutEvent'] } }

{ 'struct': 'KVMPMUX86MaskedEntryList',

    'data': { 'events': ['KVMPMUX86MaskedEntryList'] } }

Based on the above basic structs, we could provide 3 new more qom-types:
- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This is a single object option to configure PMU counter

  # bitmap filter.
  { 'union': 'KVMPMUFilterCounter',
    'base': { 'action': 'KVMPMUFilterAction',
              'type': 'KVMPMUCounterType' },
    'discriminator': 'type',
    'data': { 'x86-fixed': 'KVMPMUX86FixedCounter' } }

- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This option is used to configure a single PMU event for # PMU filter.
{ 'union': 'KVMPMUFilterEvent',

    'base': { 'action': 'KVMPMUFilterAction',
              'format': 'KVMPMUEventEncodeFmt' },
    'discriminator': 'format',
    'data': { 'raw': 'KVMPMURawEvent',
              'x86-default': 'KVMPMUX86DefalutEvent',
              'x86-masked-entry': 'KVMPMUX86MaskedEntry' } }

- 'kvm-pmu-event-list': 'KVMPMUFilterEventList'

# Used to configure multiple events.
{ 'union': 'KVMPMUFilterEventList',

    'base': { 'action': 'KVMPMUFilterAction',
              'format': 'KVMPMUEventEncodeFmt' },
    'discriminator': 'format',
    'data': { 'raw': 'KVMPMURawEventList',
              'x86-default': 'KVMPMUX86DefalutEventList',
              'x86-masked-entry': 'KVMPMUX86MaskedEntryList' } }
Quoted 5 lines

Compared to Shaoqin's original format, kvm-pmu-event-list is not able to enumerate events continuously (similar to 0x00-0x30 before), and now user must enumerate events one by one individually.

What do you think about the above 3 new commands?

I don't know enough about KVM PMU to give feedback on the specific choices, but in terms of how to do QAPI design, this looks like a good start.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#11 lore raw
In reply to Zhao Liu

Hi Zhao,

Thanks for your proposed idea. If you are willing to take the PMU Filter Enabling work, you can do it. I won't update this series anymore due to the QAPI restriction. I really appreciate if you can implement that.

Thanks,
Shaoqin

Quoted 127 lines · Zhao Liu

Hi Daniel,

Quoted 4 lines

Please describe it in terms of a QAPI definition, as that's what we're striving for with all QEMU public interfaces. Once the QAPI design is agreed, then the -object mapping is trivial, as -object's JSON format supports arbitrary QAPI structures.

Thank you for your guidance!

I rethought and and modified my previous proposal:

Let me show the command examples firstly:

   * Add a single event:
     (x86) -object kvm-pmu-event,id=e0,action=allow,format=x86-default,\
                   select=0x3c,umask=0x00
     (arm or general) -object kvm-pmu-event,id=e1,action=deny,\
                              format=raw,code=0x01
  
   * Add a counter bitmap:
     (x86) -object kvm-pmu-counter,id=cnt,action=allow,type=x86-fixed,\
                   bitmap=0xffff0000
  
   * Add an event list (must use Json syntax format):
    (x86) -object '{"qom-type":"kvm-pmu-event-list","id"="filter0","action"="allow","format"="x86-default","events=[{"select"=0x3c,"umask"=0x00},{"select"=0x2e,"umask"=0x4f}]'
    (arm) -object '{"qom-type":"kvm-pmu-event-list","id"="filter1","action"="allow","format"="raw","events"=[{"code"=0x01},{"code"=0x02}]'

The specific JSON definitions are as follows (IIUC, this is "in terms of a QAPI definition", right? ;-)):
* Define PMU event and counter bitmap with JSON format:

   - basic filter action:

   { 'enum': 'KVMPMUFilterAction',
     'prefix': 'KVM_PMU_FILTER_ACTION',
     'data': ['deny', 'allow' ] }

   - PMU counter:

   { 'enum': 'KVMPMUCounterType',
     'prefix': 'KVM_PMU_COUNTER_TYPE',
     'data': [ 'x86-fixed' ] }

   { 'struct': 'KVMPMUX86FixedCounter',
     'data': { 'bitmap': 'uint32' } }

   - PMU events (total 3 formats):

   # 3 encoding formats: "raw" is compatible with shaoqin's ARM format as
   # well as the x86 raw format, and could support other architectures in
   # the future.
   { 'enum': 'KVMPMUEventEncodeFmt',
     'prefix': 'KVM_PMU_EVENT_ENCODE_FMT',
     'data': ['raw', 'x86-default', 'x86-masked-entry' ] }

   # A general format.
   { 'struct': 'KVMPMURawEvent',
     'data': { 'code': 'uint64' } }

   # x86-specific
   { 'struct': 'KVMPMUX86DefalutEvent',
     'data': { 'select': 'uint16',
               'umask': 'uint16' } }

   # another x86 specific
   { 'struct': 'KVMPMUX86MaskedEntry',
     'data': { 'select': 'uint16',
               'match': 'uint8',
               'mask': 'uint8',
               'exclude': 'bool' } }

   # And their list wrappers:
   { 'struct': 'KVMPMURawEventList',
     'data': { 'events': ['KVMPMURawEvent'] } }

   { 'struct': 'KVMPMUX86DefalutEventList',
     'data': { 'events': ['KVMPMUX86DefalutEvent'] } }

   { 'struct': 'KVMPMUX86MaskedEntryList',
     'data': { 'events': ['KVMPMUX86MaskedEntryList'] } }

Based on the above basic structs, we could provide 3 new more qom-types:
- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This is a single object option to configure PMU counter

   # bitmap filter.
   { 'union': 'KVMPMUFilterCounter',
     'base': { 'action': 'KVMPMUFilterAction',
               'type': 'KVMPMUCounterType' },
     'discriminator': 'type',
     'data': { 'x86-fixed': 'KVMPMUX86FixedCounter' } }

- 'kvm-pmu-counter': 'KVMPMUFilterCounter'

# This option is used to configure a single PMU event for # PMU filter.
{ 'union': 'KVMPMUFilterEvent',

     'base': { 'action': 'KVMPMUFilterAction',
               'format': 'KVMPMUEventEncodeFmt' },
     'discriminator': 'format',
     'data': { 'raw': 'KVMPMURawEvent',
               'x86-default': 'KVMPMUX86DefalutEvent',
               'x86-masked-entry': 'KVMPMUX86MaskedEntry' } }

- 'kvm-pmu-event-list': 'KVMPMUFilterEventList'

# Used to configure multiple events.
{ 'union': 'KVMPMUFilterEventList',

     'base': { 'action': 'KVMPMUFilterAction',
               'format': 'KVMPMUEventEncodeFmt' },
     'discriminator': 'format',
     'data': { 'raw': 'KVMPMURawEventList',
               'x86-default': 'KVMPMUX86DefalutEventList',
               'x86-masked-entry': 'KVMPMUX86MaskedEntryList' } }

Compared to Shaoqin's original format, kvm-pmu-event-list is not able to enumerate events continuously (similar to 0x00-0x30 before), and now user must enumerate events one by one individually.

What do you think about the above 3 new commands?

Thanks and Best Regards,
Zhao

Signature · 1 line
Shaoqin
#12 lore raw
Quoted 11 lines · Shaoqin Huang

Date: Mon, 27 May 2024 14:41:01 +0800
From: Shaoqin Huang <[email protected]>
Subject: Re: [PATCH v9] arm/kvm: Enable support for
KVM_ARM_VCPU_PMU_V3_FILTER

Hi Zhao,

Thanks for your proposed idea. If you are willing to take the PMU Filter Enabling work, you can do it. I won't update this series anymore due to the QAPI restriction. I really appreciate if you can implement that.

Welcome Shaoqin, I'll cc you when I'm done with the first version (it'll take some time).

There are also some issues that I might take up and revisit, such as whether to place the kvm-pmu-filter in -cpu or in -kvm.

Anyway, hopefully eventually we can implement this feature for QEMU and users can benefit from it!

Thanks,
Zhao