Skip to contentSkip to conversation

tpm:tpm_tis_spi: set cs_change = 0 when timesout

PATCH New wanghongzhe 1 participant 1 message Jan 15, 2020 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 tpm:tpm_tis_spi: set cs_change = 0 when timesout

From: Wang Hongzhe <[email protected]>

when i reach TPM_RETRY, the cs cannot change back to 'high'. So the TPM chips thinks this communication is not over. And next times communication cannot be effective because the communications mixed up with the last time.

---
 drivers/char/tpm/tpm_tis_spi.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/char/tpm/tpm_tis_spi.c +8 -1
index d1754fd..27e57bf 100644
@@ -66,8 +66,15 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy,
 				break;
 		}
 
-		if (i == TPM_RETRY)
+		if (i == TPM_RETRY) {
+			spi_xfer->len = 1;
+			spi_xfer->cs_change = 0;
+			spi_message_init(&m);
+			spi_message_add_tail(spi_xfer, &m);
+			if (ret < 0)
+				return ret;
 			return -ETIMEDOUT;
+		}
 	}
 
 	return 0;
Signature · 1 line
1.7.12.4