Skip to contentSkip to conversation

Promise TX4 { DriveReady SeekComplete Error }

DISCUSSION Andre Russ 1 participant 1 message May 20, 2005

lore
Share & tools
lore

Andre Russ

author
#0 lore raw

Hi,

I get the following error an my hardware:

May 20 11:28:30 ss1 kernel: ata6: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:30 ss1 kernel: ata6: called with no error (51)!
May 20 11:28:32 ss1 kernel: ata6: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:32 ss1 kernel: ata6: called with no error (51)!
May 20 11:28:32 ss1 kernel: ata7: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:32 ss1 kernel: ata7: called with no error (51)!
May 20 11:28:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:35 ss1 kernel: ata8: called with no error (51)!
May 20 11:28:43 ss1 kernel: ata5: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:43 ss1 kernel: ata5: called with no error (51)!
May 20 11:29:14 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:14 ss1 kernel: ata8: called with no error (51)!
May 20 11:29:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:35 ss1 kernel: ata8: called with no error (51)!
May 20 11:29:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:35 ss1 kernel: ata8: called with no error (51)!

I am using a Promise TX4 SATAII150 controller. I have the same issue on multiple hardwares (different boards, different processors). I am very sure it is not a problem with the cableing or any other part in the box, because I exchanged every part behind the controller with other parts. HDD's and cables work excellent on a ICH6.
I tried with the latest stable kerenel (2.6.11.x) and even with the newer 2.6.12rc4 where ordered flushing was introduced, but it does not solve the problem.

Any ideas ?

Regards
Andre Russ