Second part of DG2 OA tests
Subsystems (2)
v2 cover Second part of DG2 OA tests
Add tests for changes in perf OA for DG2.This is part 2 of "Add DG2 OA test"
v2:
- Rebase
- Reposting since some patches did no land in the ML
v3:
- Fix author/sign-off name mismatch in one patch
v4:
- Add review comments
- Drop below patches
"i915/perf: Bump timestamp tolerance for DG1" (Not able to reproduce it with latest drm-tip)
"i915/perf: Add support for 64-bit counters" "i915/perf: Add a test for non-power-of-2 oa reports" "i915/perf: Treat ticks as 64 bit" "i915/perf: Treat timestamp as 64 bit value" "i915/perf: Fix DG2 A0 report header" (Separate out 64-bit OA formats from this series)
v5:
- Add patches from lionel for updated metric sets
v6:
- ACM metrics patch message size is large and gets dropped by the email server. Break the patch into smaller chunks.
v7:
- Posting part 2 of DG2 IGT OA series
v8:
- Enable sseu-config tests back for gfx12
- Drop patch for rc6-disable as the failure is not seen on DG2 anymore
Lionel Landwerlin (15):
lib/i915/perf: implement report accumulation for new format tools/i915-perf-recorder: add ability to select device lib/i915/perf: fixup report validity lib/i915/perf: add a helper to read timestamps lib/i915/perf: store bit shifting required for OA timestamps lib/i915/perf: indentation fix tools/i915-perf-recorder: capture OA & CS frequencies tools/i915-perf: make timestamp range easier to compare tools/i915-perf: printout CPU clock used tools/i915-perf: record remaining perf data on exit lib/i915/perf: add a raw timestamp utility lib/i915/perf: add helper function to get report reason tools/i915-perf: add option to printout reports data lib/i915: add new ACM/DG2 format in codegen lib/i915/perf: configure OA timestamp shift and mask for ACM
Umesh Nerlige Ramappa (13):
lib/i915/perf-config: Bump up the soversion i915/perf: Check regularly if we are done reading reports i915/perf: Fix OA short_reads test
i915/perf: Check return value from getparam i915/perf: Skip sseu-config tests for gfx12.50+ i915/perf: Account for OA sampling interval in polling test i915/perf: Define OA report types and fix oa-formats test i915/perf: Use ARRAY_SIZE consistently for num_properties i915/perf: Use gt in perf tests and lib i915/perf: Explicitly state rendercopy needs for a test i915/perf: Skip tests that use rendercopy i915/perf: Add OA formats for DG2
i915/perf: Fix CS timestamp vs OA timstamp mismatch
include/drm-uapi/i915_drm.h | 10 + .../perf-configs/perf-metricset-codegen.py | 13 + lib/i915/perf.c | 232 ++++++++++++++-- lib/i915/perf.h | 29 +- lib/i915/perf_data_reader.c | 29 +- lib/meson.build | 4 +- tests/i915/perf.c | 251 ++++++++++++++---- tools/i915-perf/i915_perf_reader.c | 117 ++++++-- tools/i915-perf/i915_perf_recorder.c | 112 +++++++- 9 files changed, 662 insertions(+), 135 deletions(-)
Signature · 1 line
2.25.1
PATCH v2 1/28 lib/i915/perf-config: Bump up the soversion
Add soversion update that was missed as part of the below patch:
"lib/i915/perf-config: extend the device info"
--- lib/meson.build | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/meson.build +1 -1
@@ -321,7 +321,7 @@ lib_igt_i915_perf_build = shared_library( dependencies: lib_igt_chipset, include_directories : inc, install: true, - soversion: '1') + soversion: '1.3') lib_igt_i915_perf = declare_dependency( link_with : lib_igt_i915_perf_build,
Signature · 1 line
2.25.1
PATCH v2 2/28 i915/perf: Check regularly if we are done reading reports
In reply to Umesh Nerlige RamappaIf we pass a user buffer as large as the OA buffer, the OA unit will return all available reports. In the second part of the buffer-fill/enable-disable tests, we are collecting all reports within a time window, but we only check the time window in the outer while loop. We may have read well past that window if OA returns more reports. Fix this rare failure by checking for the window within the inner for loop.
--- tests/i915/perf.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
tests/i915/perf.c +10 -0
@@ -2522,6 +2522,9 @@ test_buffer_fill(void) first_timestamp = report[1 ]; last_timestamp = report[1 ]; +if (((last_timestamp - first_timestamp) * oa_period) < (fill_duration /2 )) +break ; +if (oa_report_is_periodic (oa_exponent, report)) {memcpy (last_periodic_report, report,sizeof (last_periodic_report));
@@ -2537,6 +2540,8 @@ test_buffer_fill(void)do_ioctl (stream_fd,I915_PERF_IOCTL_DISABLE ,0 ); +igt_debug ("first ts = %u, last ts = %u\n" , first_timestamp, last_timestamp); + igt_debug("%f < %zu < %f\n", report_size * n_full_oa_reports * 0.45, n_periodic_reports * report_size,
@@ -2732,6 +2737,9 @@ test_enable_disable(void)oa_report_is_periodic (oa_exponent, report), oa_report_get_ctx_id(report)); +if (((last_timestamp - first_timestamp) * oa_period) < (fill_duration /2 )) +break ; +if (oa_report_is_periodic (oa_exponent, report)) {memcpy (last_periodic_report, report,sizeof (last_periodic_report));
@@ -2755,6 +2763,8 @@ test_enable_disable(void)do_ioctl (stream_fd,I915_PERF_IOCTL_DISABLE ,0 ); +igt_debug ("first ts = %u, last ts = %u\n" , first_timestamp, last_timestamp); + igt_debug("%f < %zu < %f\n", report_size * n_full_oa_reports * 0.45, n_periodic_reports * report_size,
Signature · 1 line
2.25.1
PATCH v2 3/28 i915/perf: Fix OA short_reads test
In reply to Umesh Nerlige RamappaWith 5000 ns oa exponent, report lost errors can occur. A report lost header can be read by the user even when there are no valid OA report samples, so we get an 8 byte read. This defeats the EFAULT check.
When checking for EFAULT on a sampled report, discard any report lost errors.
--- tests/i915/perf.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
tests/i915/perf.c +6 -1
@@ -2853,8 +2853,13 @@ test_short_reads(void)/* A read that can't return a single record because it would result * in a fault on buffer overrun should result in an EFAULT error... +* +* Make sure to weed out all report lost errors before verifying EFAULT. */ - ret =read (stream_fd, pages + page_size -16 , page_size); + header = (void *)(pages + page_size -16 ); +do { + ret =read (stream_fd, header, page_size); + }while (ret >0 && header->type ==DRM_I915_PERF_RECORD_OA_REPORT_LOST );igt_assert_eq (ret,-1 );igt_assert_eq (errno,EFAULT );
Signature · 1 line
2.25.1
PATCH v2 4/28 i915/perf: Check return value from getparam
In reply to Umesh Nerlige RamappaIn some cases getparam could fail. Check return from getparam and fail early on.
--- lib/i915/perf.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
lib/i915/perf.c +15 -13
@@ -389,19 +389,16 @@ intel_perf_for_devinfo(uint32_t device_id,return perf; } -static uint32_t -getparam (int drm_fd,uint32_t param) +static int +getparam (int drm_fd,uint32_t param,uint32_t *val) { -struct drm_i915_getparam gp; -int val =-1 ; - -memset (&gp,0 ,sizeof (gp)); - gp.param = param; - gp.value = &val; +struct drm_i915_getparam gp; -perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); +memset (&gp,0 ,sizeof (gp)); + gp.param = param; + gp.value = (int *)val; -return val; +return perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); } static bool
@@ -517,9 +514,9 @@ open_master_sysfs_dir(int drm_fd)struct intel_perf *intel_perf_for_fd (int drm_fd) { -uint32_t device_id =getparam (drm_fd,I915_PARAM_CHIPSET_ID ); -uint32_t device_revision =getparam (drm_fd,I915_PARAM_REVISION ); -uint32_t timestamp_frequency =getparam (drm_fd,I915_PARAM_CS_TIMESTAMP_FREQUENCY ); +uint32_t device_id; +uint32_t device_revision; +uint32_t timestamp_frequency;uint64_t gt_min_freq;uint64_t gt_max_freq;struct drm_i915_query_topology_info *topology;
@@ -536,6 +533,11 @@ intel_perf_for_fd(int drm_fd) }close (sysfs_dir_fd); +if (getparam (drm_fd,I915_PARAM_CHIPSET_ID , &device_id) || +getparam (drm_fd,I915_PARAM_REVISION , &device_revision) || +getparam (drm_fd,I915_PARAM_CS_TIMESTAMP_FREQUENCY , ×tamp_frequency)) +return NULL ; + topology =query_topology (drm_fd);if (!topology)return NULL ;
Signature · 1 line
2.25.1
PATCH v2 5/28 i915/perf: Skip sseu-config tests for gfx12.50+
In reply to Umesh Nerlige RamappaOn Gen11, the Media driver will need to limit dispatch to only big subslices (usually half the EUs depending on EU fusing). If media, render and OA are running in parallel, then OA will lose the NOA config because half of the EUs will be turned off by media. To avoid this with concurrent use cases, an sseu config to keep all EUs powered on is passed to OA in the i915_perf_open_ioctl params. This configuration is made part of the render contexts, so that it's applied when 3d contexts are running. Since this is an issue on gen11, skip sseu-config tests on other platforms.
v2:
- While sseu-config is only applicable gen11, gfx12 is already shipped with this, so skip the test only for gfx12.50+
--- tests/i915/perf.c | 1 + 1 file changed, 1 insertion(+)
tests/i915/perf.c +1 -0
@@ -5112,6 +5112,7 @@ igt_main igt_subtest_group { igt_fixture {igt_require (i915_perf_revision (drm_fd) >=4 ); +igt_require (intel_graphics_ver (devid) <IP_VER (12 ,50 )); }igt_describe ("Verify invalid SSEU opening parameters" );
Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t v2 05/28] i915/perf: Skip sseu-config tests for gfx12.50+
Quoted 10 lines · Umesh Nerlige Ramappa
On Gen11, the Media driver will need to limit dispatch to only big subslices (usually half the EUs depending on EU fusing). If media, render and OA are running in parallel, then OA will lose the NOA config because half of the EUs will be turned off by media. To avoid this with concurrent use cases, an sseu config to keep all EUs powered on is passed to OA in the
i915_perf_open_ioctlparams. This configuration is made part of the render contexts, so that it's applied when 3d contexts are running. Since this is an issue on gen11, skip sseu-config tests on other platforms.
Quoted 5 lines
v2:
- While sseu-config is only applicable gen11, gfx12 is already shipped with this, so skip the test only for gfx12.50+Signed-off-by Umesh Nerlige Ramappa <[email protected]>
Quoted 16 lines
--- tests/i915/perf.c | 1 + 1 file changed, 1 insertion(+)tests/i915/perf.c +1
-0@@ -5112,6 +5112,7 @@ igt_main igt_subtest_group { igt_fixture {igt_require (i915_perf_revision (drm_fd) >=4 ); +igt_require (intel_graphics_ver (devid) <IP_VER (12 ,50 )); }igt_describe ("Verify invalid SSEU opening parameters" );
PATCH v2 6/28 i915/perf: Account for OA sampling interval in polling test
In reply to Umesh Nerlige RamappaThe polling test reads all the reports and then expects EAGAIN on a subsequent read since it has consumed all available data. This works well for OA sampling periods in the order of 10s of ms. For smaller sampling periods like 500 us, we end up reading valid data and the test fails. Fix the check to account for the OA sampling period.
--- tests/i915/perf.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
tests/i915/perf.c +12 -4
@@ -2220,14 +2220,22 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ker n_extra_iterations++;/* At this point, after consuming pending reports (and hoping -* the scheduler hasn't stopped us for too long we now -* expect EAGAIN on read. +* the scheduler hasn't stopped us for too long) we now expect +* EAGAIN on read. While this works most of the times, there are +* some rare failures when the OA period passed to this test is +* very small (say 500 us) and that results in some valid +* reports here. To weed out those rare occurences we assert +* only if the OA period is >= 40 ms because 40 ms has withstood +* the test of time on most platforms (ref: subtest: polling). */ while ((ret =read (stream_fd, buf,sizeof (buf))) <0 && errno ==EINTR ) ; -igt_assert_eq (ret,-1 ); -igt_assert_eq (errno,EAGAIN ); + +if (requested_oa_period >=40000000 ) { +igt_assert_eq (ret,-1 ); +igt_assert_eq (errno,EAGAIN ); + } n++; }
Signature · 1 line
2.25.1
PATCH v2 7/28 i915/perf: Define OA report types and fix oa-formats test
In reply to Umesh Nerlige RamappaWith newer gen12 platforms, formats used for OAG buffer and MI_REPORT_PERF_FORMAT differ slightly. This causes issues when the oa-formats test does a sanity check. Run oa-formats for OAG reports only.
OAR formats must be tested with the gen12-mi-rpc and gen12-unprivileged-single-ctx-counters.
v2: Clarify commit message
--- tests/i915/perf.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
tests/i915/perf.c +11 -0
@@ -95,6 +95,13 @@ struct accumulator {uint64_t deltas[MAX_RAW_OA_COUNTERS ]; }; +enum { +OAG , +OAR , + +MAX_OA_TYPE , +}; +struct oa_format {const char *name;size_t size;
@@ -108,6 +115,7 @@ struct oa_format {int n_b;int c_off;int n_c; +int oa_type; };static struct oa_format hsw_oa_formats[I915_OA_FORMAT_MAX ] = {
@@ -1483,6 +1491,9 @@ test_oa_formats(void)if (!format.name)/* sparse, indexed by ID */ continue ; +if (format.oa_type !=OAG )/* sparse, indexed by ID */ +continue ; +igt_debug ("Checking OA format %s\n" , format.name); open_and_read_2_oa_reports(i,
Signature · 1 line
2.25.1
PATCH v2 8/28 i915/perf: Use ARRAY_SIZE consistently for num_properties
In reply to Umesh Nerlige RamappaReplace all variations of calculating the num_properties with ARRAY_SIZE.
--- tests/i915/perf.c | 62 +++++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 32 deletions(-)
tests/i915/perf.c +30 -32
@@ -86,8 +86,6 @@ IGT_TEST_DESCRIPTION("Test the i915 perf metrics streaming interface");#define MAX_OA_BUF_SIZE (16 * 1024 * 1024) -#define NUM_PROPERTIES (p) (sizeof(p) / (2 * sizeof(uint64_t))) -struct accumulator {#define MAX_RAW_OA_COUNTERS 62enum drm_i915_oa_format format;
@@ -1025,7 +1023,7 @@ test_system_wide_paranoid(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1051,7 +1049,7 @@ test_system_wide_paranoid(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };write_u64_file ("/proc/sys/dev/i915/perf_stream_paranoid" ,0 );
@@ -1082,7 +1080,7 @@ test_invalid_open_flags(void) };struct drm_i915_perf_open_param param = { .flags = ~0 ,/* Undefined flag bits set! */ - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1104,7 +1102,7 @@ test_invalid_oa_metric_set_id(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1138,7 +1136,7 @@ test_invalid_oa_format_id(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1170,7 +1168,7 @@ test_missing_sample_flags(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1310,7 +1308,7 @@ open_and_read_2_oa_reports(int format_id, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1777,7 +1775,7 @@ test_invalid_oa_exponent(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1812,7 +1810,7 @@ test_low_oa_exponent_permissions(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };uint64_t oa_period, oa_freq;
@@ -1875,7 +1873,7 @@ test_per_context_mode_unprivileged(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -1951,8 +1949,8 @@ test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ke .flags = I915_PERF_FLAG_FD_CLOEXEC | I915_PERF_FLAG_DISABLED, .num_properties = set_kernel_hrtimer ? -NUM_PROPERTIES (properties) : - NUM_PROPERTIES(properties) - 1, +ARRAY_SIZE (properties) /2 : + (ARRAY_SIZE(properties) / 2) - 1, .properties_ptr = to_user_pointer(properties), };uint8_t buf[1024 *1024 ];
@@ -2111,8 +2109,8 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t kerI915_PERF_FLAG_DISABLED | I915_PERF_FLAG_FD_NONBLOCK, .num_properties = set_kernel_hrtimer ? -NUM_PROPERTIES (properties) : - NUM_PROPERTIES(properties) - 1, +ARRAY_SIZE (properties) /2 : + (ARRAY_SIZE(properties) / 2) - 1, .properties_ptr = to_user_pointer(properties), };uint8_t buf[1024 *1024 ];
@@ -2302,7 +2300,7 @@ static void test_polling_small_buf(void) .flags = I915_PERF_FLAG_FD_CLOEXEC | I915_PERF_FLAG_DISABLED | I915_PERF_FLAG_FD_NONBLOCK, - .num_properties = NUM_PROPERTIES(properties), + .num_properties = ARRAY_SIZE(properties) / 2, .properties_ptr = to_user_pointer(properties), };uint32_t test_duration =80 *1000 *1000 ;
@@ -2402,7 +2400,7 @@ gen12_test_oa_tlb_invalidate(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };int num_reports1, num_reports2, num_expected_reports;
@@ -2593,7 +2591,7 @@ test_non_zero_reason(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };struct drm_i915_perf_record_header *header;
@@ -2678,7 +2676,7 @@ test_enable_disable(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED ,/* Verify we start disabled */ - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };int buf_size =65536 * (256 +sizeof (struct drm_i915_perf_record_header ));
@@ -2827,7 +2825,7 @@ test_short_reads(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };size_t record_size =256 +sizeof (struct drm_i915_perf_record_header );
@@ -2919,7 +2917,7 @@ test_non_sampling_read_error(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };int ret;
@@ -2955,7 +2953,7 @@ test_disabled_read_error(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED ,/* XXX: open disabled */ - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };uint32_t oa_report0[64 ];
@@ -3112,7 +3110,7 @@ test_mi_rpc(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };struct buf_ops *bops =buf_ops_create (drm_fd);
@@ -3215,7 +3213,7 @@ hsw_test_single_ctx_counters(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -4196,7 +4194,7 @@ test_rc6_disable(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };unsigned long rc6_start, rc6_end, rc6_enabled;
@@ -4252,7 +4250,7 @@ test_stress_open_close(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED ,/* XXX: open disabled */ - .num_properties =NUM_PROPERTIES (properties), + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };
@@ -4348,8 +4346,8 @@ test_global_sseu_config_invalid(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED ,/* XXX: open disabled */ - .num_properties =NUM_PROPERTIES (properties), - .properties_ptr =to_user_pointer (properties), + .num_properties =ARRAY_SIZE (properties) /2 , + .properties_ptr =to_user_pointer (properties), };memset (&default_sseu,0 ,sizeof (default_sseu));
@@ -4423,8 +4421,8 @@ test_global_sseu_config(void)struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED ,/* XXX: open disabled */ - .num_properties =NUM_PROPERTIES (properties), - .properties_ptr =to_user_pointer (properties), + .num_properties =ARRAY_SIZE (properties) /2 , + .properties_ptr =to_user_pointer (properties), };memset (&default_sseu,0 ,sizeof (default_sseu));
@@ -4856,7 +4854,7 @@ test_i915_ref_count(void) };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC , - .num_properties =sizeof (properties) /16 , + .num_properties =ARRAY_SIZE (properties) /2 , .properties_ptr =to_user_pointer (properties), };unsigned baseline, ref_count0, ref_count1;
Signature · 1 line
2.25.1
PATCH v2 9/28 i915/perf: Use gt in perf tests and lib
In reply to Umesh Nerlige RamappaEnable perf tests to use gt information for sysfs attributes.
--- lib/i915/perf.c | 36 ++++++++++++++++++++++++++++++++++-- tests/i915/perf.c | 27 ++++++++++++++++++++------- 2 files changed, 54 insertions(+), 9 deletions(-)
lib/i915/perf.c +34 -2
@@ -511,6 +511,35 @@ open_master_sysfs_dir(int drm_fd)return sysfs; } +typedef enum { +RPS_MIN_FREQ_MHZ , +RPS_MAX_FREQ_MHZ , + +RPS_MAX_ATTR , +}intel_sysfs_attr_id ; + +static const char *intel_sysfs_attr_name[2 ][RPS_MAX_ATTR ] = +{ + { +"gt_min_freq_mhz" , +"gt_max_freq_mhz" , + }, + { +"gt/gt0/rps_min_freq_mhz" , +"gt/gt0/rps_max_freq_mhz" , + }, +}; + +static const char * +intel_sysfs_attr_id_to_name (int sysfs_dirfd,intel_sysfs_attr_id id) +{ +assert (id <RPS_MAX_ATTR ); + +return !faccessat (sysfs_dirfd,"gt" ,O_RDONLY ,0 ) ? + intel_sysfs_attr_name[1 ][id] : + intel_sysfs_attr_name[0 ][id]; +} +struct intel_perf *intel_perf_for_fd (int drm_fd) {
@@ -526,8 +555,11 @@ intel_perf_for_fd(int drm_fd)if (sysfs_dir_fd <0 )return NULL ; -if (!read_sysfs (sysfs_dir_fd,"gt_min_freq_mhz" , >_min_freq) || - !read_sysfs (sysfs_dir_fd,"gt_max_freq_mhz" , >_max_freq)) { +#define read_sysfs_rps (fd, id, value) \ + read_sysfs(fd, intel_sysfs_attr_id_to_name(fd, id), value) + +if (!read_sysfs_rps (sysfs_dir_fd,RPS_MIN_FREQ_MHZ , >_min_freq) || + !read_sysfs_rps (sysfs_dir_fd,RPS_MAX_FREQ_MHZ , >_max_freq)) {close (sysfs_dir_fd);return NULL ; }
tests/i915/perf.c +20 -7
@@ -345,11 +345,11 @@ try_sysfs_read_u64(const char *path, uint64_t *val) }static unsigned long -sysfs_read (const char *path) +sysfs_read (enum i915_attr_id id) {unsigned long value; -igt_assert (igt_sysfs_scanf (sysfs, path,"%lu" , &value) ==1 ); +igt_assert (igt_sysfs_rps_scanf (sysfs, id,"%lu" , &value) ==1 );return value; }
@@ -4177,7 +4177,7 @@ gen12_test_single_ctx_render_target_writes_a_counter(void)static unsigned long rc6_residency_ms (void ) { -return sysfs_read ("power/rc6_residency_ms" ); +return sysfs_read (RC6_RESIDENCY_MS ); } static void
@@ -4200,7 +4200,7 @@ test_rc6_disable(void)unsigned long rc6_start, rc6_end, rc6_enabled; rc6_enabled =0 ; -igt_sysfs_scanf (sysfs,"power/rc6_enable" ,"%lu" , &rc6_enabled); +igt_sysfs_rps_scanf (sysfs,RC6_ENABLE ,"%lu" , &rc6_enabled);igt_require (rc6_enabled);/* Verify rc6 is functional by measuring residency while idle */
@@ -4837,6 +4837,19 @@ done:return ref_count; } +static int perf_sysfs_open (int i915) +{ +int dirfd, gt; + +/* use the first available sysfs interface */ +for_each_sysfs_gt_dirfd (i915, dirfd, gt) +break ; + +igt_assert (dirfd !=-1 ); + +return dirfd; +} +/* check that an open i915 perf stream holds a reference on the drm i915 module * including in the corner case where the original drm fd has been closed. */
@@ -4872,7 +4885,7 @@ test_i915_ref_count(void) drm_fd =__drm_open_driver (DRIVER_INTEL );igt_require_intel (drm_fd); devid =intel_get_drm_devid (drm_fd); - sysfs =igt_sysfs_open (drm_fd); + sysfs =perf_sysfs_open (drm_fd);/* Note: these global variables are only initialized after calling * init_sys_info()...
@@ -4974,14 +4987,14 @@ igt_mainigt_require_gem (drm_fd); devid =intel_get_drm_devid (drm_fd); - sysfs =igt_sysfs_open (drm_fd); + sysfs =perf_sysfs_open (drm_fd);igt_require (init_sys_info ());write_u64_file ("/proc/sys/dev/i915/perf_stream_paranoid" ,1 );write_u64_file ("/proc/sys/dev/i915/oa_max_sample_rate" ,100000 ); - gt_max_freq_mhz =sysfs_read ("gt_boost_freq_mhz" ); + gt_max_freq_mhz =sysfs_read (RPS_RP0_FREQ_MHZ ); render_copy =igt_get_render_copyfunc (devid);igt_require_f (render_copy,"no render-copy function\n" );
Signature · 1 line
2.25.1
PATCH v2 10/28 i915/perf: Explicitly state rendercopy needs for a test
In reply to Umesh Nerlige RamappaLet tests explicitly require rendercopy before running. This helps in temporarily blocking these tests until rendercopy is available on new platforms.
--- tests/i915/perf.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
tests/i915/perf.c +22 -3
@@ -1545,6 +1545,9 @@ static void load_helper_set_load(enum load load)static void load_helper_run (enum load load) { +if (!render_copy) +return ; +/* * FIXME fork helpers won't get cleaned up when started from within a * subtest, so handle the case where it sticks around a bit too long.
@@ -1577,12 +1580,20 @@ static void load_helper_run(enum load load)static void load_helper_stop (void ) { +if (!render_copy) +return ; +kill (lh.igt_proc.pid,SIGUSR1 );igt_assert (igt_wait_helper (&lh.igt_proc) ==0 ); }static void load_helper_init (void ) { +if (!render_copy) { +igt_info ("Running test without render_copy\n" ); +return ; + } + lh.devid =intel_get_drm_devid (drm_fd);/* MI_STORE_DATA can only use GTT address on gen4+/g33 and needs
@@ -1603,7 +1614,12 @@ static void load_helper_init(void)static void load_helper_fini (void ) { -int i915 =buf_ops_get_fd (lh.bops); +int i915; + +if (!render_copy) +return ; + + i915 =buf_ops_get_fd (lh.bops);if (lh.igt_proc.running)load_helper_stop ();
@@ -4997,7 +5013,6 @@ igt_main gt_max_freq_mhz =sysfs_read (RPS_RP0_FREQ_MHZ ); render_copy =igt_get_render_copyfunc (devid); -igt_require_f (render_copy,"no render-copy function\n" ); }igt_subtest ("non-system-wide-paranoid" )
@@ -5100,6 +5115,7 @@ igt_main igt_subtest("unprivileged-single-ctx-counters") {igt_require (IS_HASWELL (devid)); +igt_require_f (render_copy,"no render-copy function\n" );hsw_test_single_ctx_counters (); }
@@ -5113,6 +5129,7 @@ igt_main* For gen12 implement a separate test that uses only OAR */ igt_require (intel_gen (devid) >=8 &&intel_gen (devid) <12 ); +igt_require_f (render_copy,"no render-copy function\n" );gen8_test_single_ctx_render_target_writes_a_counter (); }
@@ -5128,8 +5145,10 @@ igt_maingen12_test_oa_tlb_invalidate ();igt_describe ("Measure performance for a specific context using OAR in Gen 12" ); - igt_subtest("gen12-unprivileged-single-ctx-counters") + igt_subtest("gen12-unprivileged-single-ctx-counters") { +igt_require_f (render_copy,"no render-copy function\n" );gen12_test_single_ctx_render_target_writes_a_counter (); + } }igt_subtest ("rc6-disable" )
Signature · 1 line
2.25.1
PATCH v2 11/28 i915/perf: Skip tests that use rendercopy
In reply to Umesh Nerlige RamappaRunning tests that require rendercopy sometimes leaves the DUT in an unsusable state. Further tests fail to run and DUT requires reboot. Since it affects CI efficiency, skip tests is rendercopy is missing.
--- tests/i915/perf.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
tests/i915/perf.c +16 -1
@@ -41,6 +41,7 @@#include "i915/gem.h" #include "i915/perf.h" #include "igt.h" +#include "igt_perf.h" #include "igt_sysfs.h" #include "drm.h"
@@ -4968,6 +4969,19 @@ static int i915_perf_revision(int fd)return value; } +static bool has_class_instance (int i915,uint16_t class,uint16_t instance) +{ +int fd; + + fd =perf_i915_open (i915,I915_PMU_ENGINE_BUSY (class, instance)); +if (fd >=0 ) { +close (fd); +return true; + } + +return false; +} +igt_main { igt_fixture {
@@ -5012,7 +5026,8 @@ igt_main gt_max_freq_mhz =sysfs_read (RPS_RP0_FREQ_MHZ ); - render_copy =igt_get_render_copyfunc (devid); +if (has_class_instance (drm_fd,I915_ENGINE_CLASS_RENDER ,0 )) + render_copy =igt_get_render_copyfunc (devid); }igt_subtest ("non-system-wide-paranoid" )
Signature · 1 line
2.25.1
PATCH v2 12/28 i915/perf: Add OA formats for DG2
In reply to Umesh Nerlige RamappaAdd OA formats for DG2.
v2:
- 40-bit A counter accumulation was broken due to incorrect DG2 format definition. Introduce first_a40 to fix the sanity check.
- Drop 64-bit OA formats
- Set the correct OAR format for mi-rpc
--- include/drm-uapi/i915_drm.h | 4 +++ tests/i915/perf.c | 50 +++++++++++++++++++++++++++++++------ 2 files changed, 46 insertions(+), 8 deletions(-)
include/drm-uapi/i915_drm.h +4 -0
@@ -2535,6 +2535,10 @@ enum drm_i915_oa_format {I915_OA_FORMAT_A12_B8_C8 , I915_OA_FORMAT_A32u40_A4u32_B8_C8, +/* DG2 */ + I915_OAR_FORMAT_A32u40_A4u32_B8_C8, + I915_OA_FORMAT_A24u40_A14u32_B8_C8, + I915_OA_FORMAT_MAX /* non-ABI */ };
tests/i915/perf.c +42 -8
128 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v2 13/28 i915/perf: Fix CS timestamp vs OA timstamp mismatch
In reply to Umesh Nerlige RamappaCS timestamp can have an additional configuration that shifts the timestamp value by a specified number of bits. On DG2, this additional configuration is ignored by OA, so OA timestamps are missing the shift.
Add newly defined interface to get the exact OA timestamp frequency so that the deltas can be accurately calculated.
--- include/drm-uapi/i915_drm.h | 6 ++++++ lib/i915/perf.c | 6 +++++- tests/i915/perf.c | 25 ++++++++++++++++++++++++- 3 files changed, 35 insertions(+), 2 deletions(-)
include/drm-uapi/i915_drm.h +6 -0
@@ -749,6 +749,12 @@ typedef struct drm_i915_irq_wait {/* Query if the kernel supports the I915_USERPTR_PROBE flag. */ #define I915_PARAM_HAS_USERPTR_PROBE 56 +/* +* Frequency of the timestamps in OA reports. This used to be the same as the CS +* timestamp frequency, but differs on some platforms. +*/ +#define I915_PARAM_OA_TIMESTAMP_FREQUENCY 57 +/* Must be kept compact -- no holes and well documented */ typedef struct drm_i915_getparam {
lib/i915/perf.c +5 -1
@@ -566,7 +566,11 @@ intel_perf_for_fd(int drm_fd)close (sysfs_dir_fd);if (getparam (drm_fd,I915_PARAM_CHIPSET_ID , &device_id) || -getparam (drm_fd,I915_PARAM_REVISION , &device_revision) || +getparam (drm_fd,I915_PARAM_REVISION , &device_revision)) +return NULL ; + +/* if OA_TIMESTAMP_FREQUENCY is not supported, fall back to CS_TIMESTAMP_FREQUENCY */ +if (getparam (drm_fd,I915_PARAM_OA_TIMESTAMP_FREQUENCY , ×tamp_frequency) &&getparam (drm_fd,I915_PARAM_CS_TIMESTAMP_FREQUENCY , ×tamp_frequency))return NULL ;
tests/i915/perf.c +24 -1
@@ -442,6 +442,29 @@ gen8_read_report_reason(const uint32_t *report)return "unknown" ; } +static uint32_t +cs_timestamp_frequency (int fd) +{ +struct drm_i915_getparam gp = {}; +static uint32_t value =0 ; + +if (value) +return value; + + gp.param =I915_PARAM_CS_TIMESTAMP_FREQUENCY ; + gp.value = (int *)(&value); + +igt_assert_eq (igt_ioctl (fd,DRM_IOCTL_I915_GETPARAM , &gp),0 ); + +return value; +} + +static uint64_t +cs_timebase_scale (uint32_t u32_delta) +{ +return ((uint64_t )u32_delta *NSEC_PER_SEC ) /cs_timestamp_frequency (drm_fd); +} +static uint64_t timebase_scale (uint32_t u32_delta) {
@@ -4142,7 +4165,7 @@ static void gen12_single_ctx_helper(void)/* Sanity check that we can pass the delta to timebase_scale */ igt_assert (delta_ts64 <UINT32_MAX ); delta_oa32_ns =timebase_scale (delta_oa32); - delta_ts64_ns =timebase_scale (delta_ts64); + delta_ts64_ns =cs_timebase_scale (delta_ts64);igt_debug ("oa32 delta = %u, = %uns\n" , delta_oa32, (unsigned )delta_oa32_ns);
Signature · 1 line
2.25.1
PATCH v2 14/28 lib/i915/perf: implement report accumulation for new format
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
Available on XEHPSDV+.
--- lib/i915/perf.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
lib/i915/perf.c +33 -0
@@ -778,6 +778,39 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc,memset (acc,0 ,sizeof (*acc));switch (oa_format) { +case I915_OA_FORMAT_A24u40_A14u32_B8_C8: +accumulate_uint32 (start +1 , end +1 , deltas + idx++);/* timestamp */ +accumulate_uint32 (start +3 , end +3 , deltas + idx++);/* clock */ + +/* 4x 32bit A0-3 counters... */ +for (i =0 ; i <4 ; i++) +accumulate_uint32 (start +4 + i, end +4 + i, deltas + idx++); + +/* 20x 40bit A4-23 counters... */ +for (i =0 ; i <20 ; i++) +accumulate_uint40 (i +4 , start, end, deltas + idx++); + +/* 4x 32bit A24-27 counters... */ +for (i =0 ; i <4 ; i++) +accumulate_uint32 (start +28 + i, end +28 + i, deltas + idx++); + +/* 4x 40bit A28-31 counters... */ +for (i =0 ; i <4 ; i++) +accumulate_uint40 (i +28 , start, end, deltas + idx++); + +/* 5x 32bit A32-36 counters... */ +for (i =0 ; i <5 ; i++) +accumulate_uint32 (start +36 + i, end +36 + i, deltas + idx++); + +/* 1x 32bit A37 counter... */ +accumulate_uint32 (start +46 , end +46 , deltas + idx++); + +/* 8x 32bit B counters + 8x 32bit C counters... */ +for (i =0 ; i <16 ; i++) +accumulate_uint32 (start +48 + i, end +48 + i, deltas + idx++); +break ; + +case I915_OAR_FORMAT_A32u40_A4u32_B8_C8:case I915_OA_FORMAT_A32u40_A4u32_B8_C8:accumulate_uint32 (start +1 , end +1 , deltas + idx++);/* timestamp */ accumulate_uint32 (start +3 , end +3 , deltas + idx++);/* clock */
Signature · 1 line
2.25.1
PATCH v2 15/28 tools/i915-perf-recorder: add ability to select device
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
We're starting to have system with multiple Intel GPUs.
--- tools/i915-perf/i915_perf_recorder.c | 50 ++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 7 deletions(-)
tools/i915-perf/i915_perf_recorder.c +43 -7
@@ -250,16 +250,37 @@ find_intel_render_node(void)return -1 ; } +static void +print_intel_devices (void ) +{ +fprintf (stdout,"Available devices:\n" ); +for (int i =0 ; i <128 ; i++) { +if (read_device_param ("card" , i,"vendor" ) ==0x8086 ) { +uint32_t devid =read_device_param ("card" , i,"device" ); +const struct intel_device_info *devinfo = +intel_get_device_info (devid); +fprintf (stdout," %i: %s (0x%04hx)\n" , i, + devinfo ? devinfo->codename :"unknwon" , + devid); + } + } +} +static int -open_render_node (uint32_t *devid) +open_render_node (uint32_t *devid,int card) {char *name;int ret;int fd; +int render; -int render =find_intel_render_node (); -if (render <0 ) -return -1 ; +if (card <0 ) { + render =find_intel_render_node (); +if (render <0 ) +return -1 ; + }else { + render =128 + card; + } ret =asprintf (&name,"/dev/dri/renderD%u" , render);assert (ret !=-1 );
@@ -722,6 +743,9 @@ usage(const char *name)"Recording tool for i915-perf.\n" "\n" " --help, -h Print this screen\n" +" --device, -d <value> Device to use\n" +" (value=list to list devices\n" +" value=1 to use /dev/dri/card1)\n" " --correlation-period, -c <value> Time period of timestamp correlation in seconds\n" " (default = 1.0)\n" " --perf-period, -p <value> Time period of i915-perf reports in seconds\n"
@@ -772,6 +796,7 @@ main(int argc, char *argv[]) {const struct option long_options[] = { {"help" , no_argument,0 ,'h' }, + {"device" , required_argument,0 ,'d' }, {"correlation-period" , required_argument,0 ,'c' }, {"perf-period" , required_argument,0 ,'p' }, {"metric" , required_argument,0 ,'m' },
@@ -798,7 +823,7 @@ main(int argc, char *argv[])struct timespec now;uint64_t corr_period_ns, poll_time_ns;uint32_t circular_size =0 ; -int opt; +int opt, dev_node_id =-1 ;bool list_counters = false;FILE *output =NULL ;struct recording_context ctx = {
@@ -812,7 +837,7 @@ main(int argc, char *argv[]) .poll_period = 5 * 1000 * 1000, }; -while ((opt =getopt_long (argc, argv,"hc:p:m:Co:s:f:k:P:" , long_options,NULL )) !=-1 ) { +while ((opt =getopt_long (argc, argv,"hc:d:p:m:Co:s:f:k:P:" , long_options,NULL )) !=-1 ) {switch (opt) {case 'h' :usage (argv[0 ]);
@@ -820,6 +845,12 @@ main(int argc, char *argv[])case 'c' : corr_period =atof (optarg);break ; +case 'd' : +if (!strcmp (optarg,"list" )) + dev_node_id =-2 ; +else + dev_node_id =atoi (optarg); +break ;case 'p' : perf_period =atof (optarg);break ;
@@ -865,7 +896,12 @@ main(int argc, char *argv[]) } } - ctx.drm_fd =open_render_node (&ctx.devid); +if (dev_node_id ==-2 ) { +print_intel_devices (); +return EXIT_SUCCESS ; + } + + ctx.drm_fd =open_render_node (&ctx.devid, dev_node_id);if (ctx.drm_fd <0 ) {fprintf (stderr,"Unable to open device.\n" );return EXIT_FAILURE ;
Signature · 1 line
2.25.1
PATCH v2 16/28 lib/i915/perf: fixup report validity
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
It appears that on Gfx12+ there is no more validity bit in the reports.
--- lib/i915/perf_data_reader.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
lib/i915/perf_data_reader.c +5 -4
@@ -45,13 +45,14 @@ oa_report_ctx_is_valid(const struct intel_perf_devinfo *devinfo, {const uint32_t *report = (const uint32_t *) _report; -if (devinfo->graphics_ver <8 ) { +if (devinfo->graphics_ver <8 )return false;/* TODO */ - }else if (devinfo->graphics_ver ==8 ) { +if (devinfo->graphics_ver >=12 ) +return true;/* Always valid */ +if (devinfo->graphics_ver ==8 )return report[0 ] & (1ul <<25 ); - }else if (devinfo->graphics_ver >8 ) { +if (devinfo->graphics_ver >8 )return report[0 ] & (1ul <<16 ); - }return false; }
Signature · 1 line
2.25.1
PATCH v2 17/28 lib/i915/perf: add a helper to read timestamps
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
We expect location/size of the timestamp might move around in the report.
--- lib/i915/perf.c | 21 +++++++++++++++++++++ lib/i915/perf.h | 4 ++++ lib/i915/perf_data_reader.c | 14 ++++++-------- lib/meson.build | 4 ++-- tools/i915-perf/i915_perf_reader.c | 20 ++++++++++++++++++++ 5 files changed, 53 insertions(+), 10 deletions(-)
lib/i915/perf.c +21 -0
@@ -839,3 +839,24 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc, } } + +uint64_t intel_perf_read_record_timestamp (const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set, +const struct drm_i915_perf_record_header *record) +{ +const uint32_t *report32 = (const uint32_t *)(record +1 ); +uint64_t ts; + +switch (metric_set->perf_oa_format) { +case I915_OA_FORMAT_A24u40_A14u32_B8_C8: +case I915_OA_FORMAT_A32u40_A4u32_B8_C8: +case I915_OA_FORMAT_A45_B8_C8 : + ts = report32[1 ]; +break ; + +default : +assert (0 ); + } + +return ts; +}
lib/i915/perf.h +4 -0
@@ -324,6 +324,10 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc,const struct drm_i915_perf_record_header *record0, const struct drm_i915_perf_record_header *record1); +uint64_t intel_perf_read_record_timestamp (const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set, +const struct drm_i915_perf_record_header *record); + #ifdef __cplusplus };#endif
lib/i915/perf_data_reader.c +6 -8
@@ -65,12 +65,6 @@ oa_report_ctx_id(const struct intel_perf_devinfo *devinfo, const uint8_t *reportreturn ((const uint32_t *) report)[2 ]; } -static inline uint64_t -oa_report_timestamp (const uint8_t *report) -{ -return ((const uint32_t *)report)[1 ]; -} -static void append_record (struct intel_perf_data_reader *reader,const struct drm_i915_perf_record_header *header)
@@ -298,8 +292,12 @@ generate_cpu_events(struct intel_perf_data_reader *reader) last_ctx_id =oa_report_ctx_id (&reader->devinfo, start_report); current_ctx_id =oa_report_ctx_id (&reader->devinfo, end_report); - gpu_ts_start =oa_report_timestamp (start_report); - gpu_ts_end =oa_report_timestamp (end_report); + gpu_ts_start =intel_perf_read_record_timestamp (reader->perf, + reader->metric_set, + last_header); + gpu_ts_end =intel_perf_read_record_timestamp (reader->perf, + reader->metric_set, + current_header);if (last_ctx_id == current_ctx_id)continue ;
lib/meson.build +2 -2
@@ -321,7 +321,7 @@ lib_igt_i915_perf_build = shared_library( dependencies: lib_igt_chipset, include_directories : inc, install: true, - soversion: '1.3') + soversion: '1.4') lib_igt_i915_perf = declare_dependency( link_with : lib_igt_i915_perf_build,
@@ -342,7 +342,7 @@ pkgconf.set('prefix', get_option('prefix')) pkgconf.set('exec_prefix', '${prefix}') pkgconf.set('libdir', '${prefix}/@0@'.format(get_option('libdir'))) pkgconf.set('includedir', '${prefix}/@0@'.format(get_option('includedir'))) -pkgconf.set('i915_perf_version', '1.3.0') +pkgconf.set('i915_perf_version', '1.4.0') configure_file( input : 'i915-perf.pc.in',
tools/i915-perf/i915_perf_reader.c +20 -0
@@ -230,6 +230,26 @@ main(int argc, char *argv[])fprintf (stdout,"Context switches: %u\n" , reader.n_timelines);fprintf (stdout,"Timestamp correlation points: %u\n" , reader.n_correlations); +if (reader.n_correlations <2 ) { +fprintf (stderr,"Less than 2 CPU/GPU timestamp correlation points.\n" ); +return EXIT_FAILURE ; + } + +fprintf (stdout,"Timestamp correlation CPU range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , + reader.correlations[0 ]->cpu_timestamp, + reader.correlations[reader.n_correlations -1 ]->cpu_timestamp); +fprintf (stdout,"Timestamp correlation GPU range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , + reader.correlations[0 ]->gpu_timestamp, + reader.correlations[reader.n_correlations -1 ]->gpu_timestamp); + +fprintf (stdout,"OA data timestamp range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , +intel_perf_read_record_timestamp (reader.perf, + reader.metric_set, + reader.records[0 ]), +intel_perf_read_record_timestamp (reader.perf, + reader.metric_set, + reader.records[reader.n_records -1 ])); +if (strcmp (reader.metric_set_uuid, reader.metric_set->hw_config_guid)) {fprintf (stdout, "WARNING: Recording used a different HW configuration.\n"
Signature · 1 line
2.25.1
PATCH v2 18/28 lib/i915/perf: store bit shifting required for OA timestamps
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
Some new platforms have the OA timestamps shifted to the right by a number of bits. This is configurable but since i915 appears to leave the default values, let's just hardcode this in the device info.
--- lib/i915/perf.c | 31 +++++++++++++++++++++++++----- lib/i915/perf.h | 18 ++++++++++++++++- lib/i915/perf_data_reader.c | 2 +- lib/meson.build | 4 ++-- tools/i915-perf/i915_perf_reader.c | 3 ++- 5 files changed, 48 insertions(+), 10 deletions(-)
lib/i915/perf.c +26 -5
@@ -299,6 +299,10 @@ intel_perf_for_devinfo(uint32_t device_id,/* Valid on most generations except Gen9LP. */ perf->devinfo.eu_threads_count =7 ; +/* Most platforms have full 32bit timestamps. */ + perf->devinfo.oa_timestamp_mask =0xffffffff ; + perf->devinfo.oa_timestamp_shift =0 ; +if (devinfo->is_haswell) {intel_perf_load_metrics_hsw (perf); }else if (devinfo->is_broadwell) {
@@ -765,7 +769,8 @@ accumulate_uint40(int a_index, }void intel_perf_accumulate_reports (struct intel_perf_accumulator *acc, -int oa_format, +const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set,const struct drm_i915_perf_record_header *record0,const struct drm_i915_perf_record_header *record1) {
@@ -777,9 +782,13 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc,memset (acc,0 ,sizeof (*acc)); -switch (oa_format) { +switch (metric_set->perf_oa_format) {case I915_OA_FORMAT_A24u40_A14u32_B8_C8: -accumulate_uint32 (start +1 , end +1 , deltas + idx++);/* timestamp */ +/* timestamp */ +if (perf->devinfo.oa_timestamp_shift >=0 ) + deltas[idx++] += (end[1 ] - start[1 ]) << perf->devinfo.oa_timestamp_shift; +else + deltas[idx++] += (end[1 ] - start[1 ]) >> (-perf->devinfo.oa_timestamp_shift);accumulate_uint32 (start +3 , end +3 , deltas + idx++);/* clock */ /* 4x 32bit A0-3 counters... */
@@ -812,7 +821,10 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc,case I915_OAR_FORMAT_A32u40_A4u32_B8_C8:case I915_OA_FORMAT_A32u40_A4u32_B8_C8: -accumulate_uint32 (start +1 , end +1 , deltas + idx++);/* timestamp */ +if (perf->devinfo.oa_timestamp_shift >=0 ) + deltas[idx++] += (end[1 ] - start[1 ]) << perf->devinfo.oa_timestamp_shift; +else + deltas[idx++] += (end[1 ] - start[1 ]) >> (-perf->devinfo.oa_timestamp_shift);accumulate_uint32 (start +3 , end +3 , deltas + idx++);/* clock */ /* 32x 40bit A counters... */
@@ -829,7 +841,11 @@ void intel_perf_accumulate_reports(struct intel_perf_accumulator *acc,break ;case I915_OA_FORMAT_A45_B8_C8 : -accumulate_uint32 (start +1 , end +1 , deltas);/* timestamp */ +/* timestamp */ +if (perf->devinfo.oa_timestamp_shift >=0 ) + deltas[0 ] += (end[1 ] - start[1 ]) << perf->devinfo.oa_timestamp_shift; +else + deltas[0 ] += (end[1 ] - start[1 ]) >> (-perf->devinfo.oa_timestamp_shift);for (i =0 ; i <61 ; i++)accumulate_uint32 (start +3 + i, end +3 + i, deltas +1 + i);
@@ -858,5 +874,10 @@ uint64_t intel_perf_read_record_timestamp(const struct intel_perf *perf,assert (0 ); } +if (perf->devinfo.oa_timestamp_shift >=0 ) + ts <<= perf->devinfo.oa_timestamp_shift; +else + ts >>= -perf->devinfo.oa_timestamp_shift; +return ts; }
lib/i915/perf.h +17 -1
@@ -56,6 +56,21 @@ struct intel_perf_devinfo {uint32_t devid;uint32_t graphics_ver;uint32_t revision; +/** +* Bit shifting required to put OA report timestamps into +* timestamp_frequency (some HW generations can shift +* timestamp values to the right by a number of bits). +*/ +int32_t oa_timestamp_shift; +/** +* On some platforms only part of the timestamp bits are valid +* (on previous platforms we would get full 32bits, newer +* platforms can have fewer). It's important to know when +* correlating the full 36bits timestamps to the OA report +* timestamps. +*/ +uint64_t oa_timestamp_mask; +/* Frequency of the timestamps in Hz */ uint64_t timestamp_frequency;uint64_t gt_min_freq;uint64_t gt_max_freq;
@@ -320,7 +335,8 @@ void intel_perf_add_metric_set(struct intel_perf *perf,void intel_perf_load_perf_configs (struct intel_perf *perf,int drm_fd);void intel_perf_accumulate_reports (struct intel_perf_accumulator *acc, -int oa_format, +const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set,const struct drm_i915_perf_record_header *record0,const struct drm_i915_perf_record_header *record1);
lib/i915/perf_data_reader.c +1 -1
@@ -209,7 +209,7 @@ correlate_gpu_timestamp(struct intel_perf_data_reader *reader,* Try to figure what portion of the correlation data the * 32bit timestamp belongs to. */ -uint64_t mask =0xffffffff ; +uint64_t mask = reader->perf->devinfo.oa_timestamp_mask;int corr_idx =-1 ;for (uint32_t i =0 ; i < reader->n_correlation_chunks; i++) {
lib/meson.build +2 -2
@@ -321,7 +321,7 @@ lib_igt_i915_perf_build = shared_library( dependencies: lib_igt_chipset, include_directories : inc, install: true, - soversion: '1.4') + soversion: '1.5') lib_igt_i915_perf = declare_dependency( link_with : lib_igt_i915_perf_build,
@@ -342,7 +342,7 @@ pkgconf.set('prefix', get_option('prefix')) pkgconf.set('exec_prefix', '${prefix}') pkgconf.set('libdir', '${prefix}/@0@'.format(get_option('libdir'))) pkgconf.set('includedir', '${prefix}/@0@'.format(get_option('includedir'))) -pkgconf.set('i915_perf_version', '1.4.0') +pkgconf.set('i915_perf_version', '1.5.0') configure_file( input : 'i915-perf.pc.in',
tools/i915-perf/i915_perf_reader.c +2 -1
@@ -271,7 +271,8 @@ main(int argc, char *argv[])fprintf (stdout,"hw_id=0x%x %s\n" , item->hw_id, item->hw_id ==0xffffffff ?"(idle)" :"" ); -intel_perf_accumulate_reports (&accu, reader.metric_set->perf_oa_format, +intel_perf_accumulate_reports (&accu, + reader.perf, reader.metric_set, i915_report0, i915_report1);for (uint32_t c =0 ; c < n_counters; c++) {
Signature · 1 line
2.25.1
PATCH v2 19/28 lib/i915/perf: indentation fix
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
--- lib/i915/perf_data_reader.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
lib/i915/perf_data_reader.c +2 -2
@@ -337,8 +337,8 @@ bool intel_perf_data_reader_init(struct intel_perf_data_reader *reader, int perf_file_fd) { -struct stat st; -if (fstat (perf_file_fd, &st) !=0 ) { +struct stat st; +if (fstat (perf_file_fd, &st) !=0 ) {snprintf (reader->error_msg,sizeof (reader->error_msg),"Unable to access file (%s)" ,strerror (errno));return false;
Signature · 1 line
2.25.1
PATCH v2 20/28 tools/i915-perf-recorder: capture OA & CS frequencies
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
CS & OA timestamp don't have the same accuracy, so we need to adjuste the correlated timestamps (capture from the CS unit) in the recording to fit the data in the OA reports.
--- tools/i915-perf/i915_perf_recorder.c | 43 ++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 5 deletions(-)
tools/i915-perf/i915_perf_recorder.c +38 -5
@@ -328,7 +328,7 @@ perf_ioctl(int fd, unsigned long request, void *arg) }static uint64_t -get_device_timestamp_frequency (const struct intel_device_info *devinfo,int drm_fd) +get_device_cs_timestamp_frequency (const struct intel_device_info *devinfo,int drm_fd) {drm_i915_getparam_t gp;int timestamp_frequency;
@@ -352,12 +352,44 @@ get_device_timestamp_frequency(const struct intel_device_info *devinfo, int drm_return 12000000 ; } +static uint64_t +get_device_oa_timestamp_frequency (const struct intel_device_info *devinfo,int drm_fd) +{ +drm_i915_getparam_t gp; +int timestamp_frequency; + + gp.param =I915_PARAM_OA_TIMESTAMP_FREQUENCY ; + gp.value = ×tamp_frequency; +if (perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp) ==0 ) +return timestamp_frequency; + + gp.param =I915_PARAM_CS_TIMESTAMP_FREQUENCY ; + gp.value = ×tamp_frequency; +if (perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp) ==0 ) +return timestamp_frequency; + + +if (devinfo->graphics_ver >9 ) { +fprintf (stderr,"Unable to query timestamp frequency from i915, please update kernel.\n" ); +return 0 ; + } + +fprintf (stderr,"Warning: unable to query timestamp frequency from i915, guessing values...\n" ); + +if (devinfo->graphics_ver <=8 ) +return 12500000 ; +if (devinfo->is_broxton) +return 19200000 ; +return 12000000 ; +} +struct recording_context {int drm_fd;int perf_fd;uint32_t devid; -uint64_t timestamp_frequency; +uint64_t oa_timestamp_frequency; +uint64_t cs_timestamp_frequency;const struct intel_device_info *devinfo;
@@ -459,7 +491,7 @@ static bool write_header(FILE *output, struct recording_context *ctx) {struct intel_perf_record_device_info info = { - .timestamp_frequency = ctx->timestamp_frequency, + .timestamp_frequency = ctx->oa_timestamp_frequency, .device_id = ctx->perf->devinfo.devid, .device_revision = ctx->perf->devinfo.revision, .gt_min_frequency = ctx->perf->devinfo.gt_min_freq,
@@ -964,7 +996,8 @@ main(int argc, char *argv[])intel_perf_load_perf_configs (ctx.perf, ctx.drm_fd); - ctx.timestamp_frequency =get_device_timestamp_frequency (ctx.devinfo, ctx.drm_fd); + ctx.oa_timestamp_frequency =get_device_oa_timestamp_frequency (ctx.devinfo, ctx.drm_fd); + ctx.cs_timestamp_frequency =get_device_cs_timestamp_frequency (ctx.devinfo, ctx.drm_fd);signal (SIGINT , sigint_handler);
@@ -1036,7 +1069,7 @@ main(int argc, char *argv[]) goto fail; } - ctx.oa_exponent =oa_exponent_for_period (ctx.timestamp_frequency, perf_period); + ctx.oa_exponent =oa_exponent_for_period (ctx.oa_timestamp_frequency, perf_period);fprintf (stdout,"Opening perf stream with metric_id=%" PRIu64" oa_exponent=%u oa_format=%u\n" , ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent, ctx.metric_set->perf_oa_format);
Signature · 1 line
2.25.1
PATCH v2 21/28 tools/i915-perf: make timestamp range easier to compare
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
With timestamp bit shifting stuff, aligning values in the console is useful to compare them.
--- tools/i915-perf/i915_perf_reader.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
tools/i915-perf/i915_perf_reader.c +6 -3
@@ -235,14 +235,17 @@ main(int argc, char *argv[])return EXIT_FAILURE ; } -fprintf (stdout,"Timestamp correlation CPU range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , +fprintf (stdout,"Timestamp correlation CPU range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , reader.correlations[0 ]->cpu_timestamp, reader.correlations[reader.n_correlations -1 ]->cpu_timestamp); -fprintf (stdout,"Timestamp correlation GPU range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , +fprintf (stdout,"Timestamp correlation GPU range (64b): 0x%016" PRIx64"-0x%016" PRIx64"\n" , reader.correlations[0 ]->gpu_timestamp, reader.correlations[reader.n_correlations -1 ]->gpu_timestamp); +fprintf (stdout,"Timestamp correlation GPU range (32b): 0x%016" PRIx64"-0x%016" PRIx64"\n" , + reader.correlations[0 ]->gpu_timestamp &0xffffffff , + reader.correlations[reader.n_correlations -1 ]->gpu_timestamp &0xffffffff ); - fprintf(stdout, "OA data timestamp range: 0x%016"PRIx64"-0x%016"PRIx64"\n", + fprintf(stdout, "OA data timestamp range: 0x%016"PRIx64"-0x%016"PRIx64"\n", intel_perf_read_record_timestamp(reader.perf, reader.metric_set, reader.records[0]),
Signature · 1 line
2.25.1
PATCH v2 22/28 tools/i915-perf: printout CPU clock used
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
--- tools/i915-perf/i915_perf_recorder.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
tools/i915-perf/i915_perf_recorder.c +14 -0
@@ -588,6 +588,17 @@ static uint64_t timespec_diff(struct timespec *begin,static clock_t correlation_clock_id =CLOCK_MONOTONIC ; +static const char * +get_correlation_clock_name (clock_t clock_id) +{ +switch (clock_id) { +case CLOCK_BOOTTIME :return "bootime" ; +case CLOCK_MONOTONIC :return "monotonic" ; +case CLOCK_MONOTONIC_RAW :return "monotonic_raw" ; +default :return "*unknown*" ; + } +} +static bool get_correlation_timestamps (struct intel_perf_record_timestamp_correlation *corr,int drm_fd) {
@@ -1069,6 +1080,9 @@ main(int argc, char *argv[]) goto fail; } +fprintf (stdout,"Using correlation clock: %s\n" , +get_correlation_clock_name (correlation_clock_id)); + ctx.oa_exponent =oa_exponent_for_period (ctx.oa_timestamp_frequency, perf_period); fprintf(stdout, "Opening perf stream with metric_id=%"PRIu64" oa_exponent=%u oa_format=%u\n", ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent,
Signature · 1 line
2.25.1
PATCH v2 23/28 tools/i915-perf: record remaining perf data on exit
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
--- tools/i915-perf/i915_perf_recorder.c | 5 +++++ 1 file changed, 5 insertions(+)
tools/i915-perf/i915_perf_recorder.c +5 -0
@@ -1144,6 +1144,11 @@ main(int argc, char *argv[])fprintf (stdout,"Exiting...\n" ); +if (!write_i915_perf_data (ctx.output_stream, ctx.perf_fd)) { +fprintf (stderr,"Failed to write i915-perf data: %s\n" , +strerror (errno)); + } +if (!write_correlation_timestamps (ctx.output_stream, ctx.drm_fd)) { fprintf(stderr, "Failed to write final i915 timestamp correlation data: %s\n",
Signature · 1 line
2.25.1
PATCH v2 24/28 lib/i915/perf: add a raw timestamp utility
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
Helpful to figure out the bitshifting needed in OA timestamp.
--- lib/i915/perf.c | 21 +++++++++++++++++++++ lib/i915/perf.h | 4 ++++ tools/i915-perf/i915_perf_reader.c | 7 +++++++ 3 files changed, 32 insertions(+)
lib/i915/perf.c +21 -0
@@ -881,3 +881,24 @@ uint64_t intel_perf_read_record_timestamp(const struct intel_perf *perf,return ts; } + +uint64_t intel_perf_read_record_timestamp_raw (const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set, +const struct drm_i915_perf_record_header *record) +{ +const uint32_t *report32 = (const uint32_t *)(record +1 ); +uint64_t ts; + +switch (metric_set->perf_oa_format) { +case I915_OA_FORMAT_A24u40_A14u32_B8_C8: +case I915_OA_FORMAT_A32u40_A4u32_B8_C8: +case I915_OA_FORMAT_A45_B8_C8 : + ts = report32[1 ]; +break ; + +default : +assert (0 ); + } + +return ts; +}
lib/i915/perf.h +4 -0
@@ -344,6 +344,10 @@ uint64_t intel_perf_read_record_timestamp(const struct intel_perf *perf,const struct intel_perf_metric_set *metric_set, const struct drm_i915_perf_record_header *record); +uint64_t intel_perf_read_record_timestamp_raw (const struct intel_perf *perf, +const struct intel_perf_metric_set *metric_set, +const struct drm_i915_perf_record_header *record); + #ifdef __cplusplus };#endif
tools/i915-perf/i915_perf_reader.c +7 -0
@@ -252,6 +252,13 @@ main(int argc, char *argv[])intel_perf_read_record_timestamp (reader.perf, reader.metric_set, reader.records[reader.n_records - 1])); +fprintf (stdout,"OA raw data timestamp range: 0x%016" PRIx64"-0x%016" PRIx64"\n" , +intel_perf_read_record_timestamp_raw (reader.perf, + reader.metric_set, + reader.records[0 ]), +intel_perf_read_record_timestamp_raw (reader.perf, + reader.metric_set, + reader.records[reader.n_records -1 ]));if (strcmp (reader.metric_set_uuid, reader.metric_set->hw_config_guid)) { fprintf(stdout,
Signature · 1 line
2.25.1
PATCH v2 25/28 lib/i915/perf: add helper function to get report reason
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
Useful to inspect reports.
--- lib/i915/perf.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++ lib/i915/perf.h | 3 +++ lib/meson.build | 2 +- 3 files changed, 58 insertions(+), 1 deletion(-)
lib/i915/perf.c +54 -0
@@ -902,3 +902,57 @@ uint64_t intel_perf_read_record_timestamp_raw(const struct intel_perf *perf,return ts; } + +const char *intel_perf_read_report_reason (const struct intel_perf *perf, +const struct drm_i915_perf_record_header *record) +{ +const uint32_t *report = (const uint32_t *) (record +1 ); + +/* Not really documented on Gfx7/7.5*/ +if (perf->devinfo.graphics_ver <8 ) +return "timer" ; + +/* Gfx8-11 */ +if (perf->devinfo.graphics_ver <12 ) { +uint32_t reason = report[0 ] >>19 ; +if (reason & (1u <<0 )) +return "timer" ; +if (reason & (1u <<1 )) +return "trigger1" ; +if (reason & (1u <<2 )) +return "trigger2" ; +if (reason & (1u <<3 )) +return "context-switch" ; +if (reason & (1u <<4 )) +return "go-transition" ; + +if (perf->devinfo.graphics_ver >=9 && + reason & (1u <<5 )) +return "clock-ratio-change" ; + +return "unknown" ; + } + +/* Gfx12 */ +if (perf->devinfo.graphics_ver <=12 ) { +uint32_t reason = report[0 ] >>19 ; +if (reason & (1u <<0 )) +return "timer" ; +if (reason & (1u <<1 )) +return "trigger1" ; +if (reason & (1u <<2 )) +return "trigger2" ; +if (reason & (1u <<3 )) +return "context-switch" ; +if (reason & (1u <<4 )) +return "go-transition" ; +if (reason & (1u <<5 )) +return "clock-ratio-change" ; +if (reason & (1u <<6 )) +return "mmio-trigger" ; + +return "unknown" ; + } + +return "unknown" ; +}
lib/i915/perf.h +3 -0
@@ -348,6 +348,9 @@ uint64_t intel_perf_read_record_timestamp_raw(const struct intel_perf *perf,const struct intel_perf_metric_set *metric_set, const struct drm_i915_perf_record_header *record); +const char *intel_perf_read_report_reason (const struct intel_perf *perf, +const struct drm_i915_perf_record_header *record); + #ifdef __cplusplus };#endif
lib/meson.build +1 -1
@@ -342,7 +342,7 @@ pkgconf.set('prefix', get_option('prefix')) pkgconf.set('exec_prefix', '${prefix}') pkgconf.set('libdir', '${prefix}/@0@'.format(get_option('libdir'))) pkgconf.set('includedir', '${prefix}/@0@'.format(get_option('includedir'))) -pkgconf.set('i915_perf_version', '1.5.0') +pkgconf.set('i915_perf_version', '1.5.1') configure_file( input : 'i915-perf.pc.in',
Signature · 1 line
2.25.1
PATCH v2 26/28 tools/i915-perf: add option to printout reports data
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
This is helpful to get an idea of how timelines of reports should be built.
--- tools/i915-perf/i915_perf_reader.c | 88 ++++++++++++++++++++---------- 1 file changed, 58 insertions(+), 30 deletions(-)
tools/i915-perf/i915_perf_reader.c +58 -30
@@ -53,7 +53,8 @@ usage(void)" --help, -h Print this screen\n" " --counters, -c c1,c2,... List of counters to display values for.\n" " Use 'all' to display all counters.\n" - " Use 'list' to list available counters.\n"); +" Use 'list' to list available counters.\n" + " --reports, -r Print out data per report.\n"); } static struct intel_perf_logical_counter *
@@ -165,12 +166,49 @@ get_logical_counters(struct intel_perf_metric_set *metric_set,return counters; } +static void +print_report_deltas (const struct intel_perf_data_reader *reader, +const struct drm_i915_perf_record_header *i915_report0, +const struct drm_i915_perf_record_header *i915_report1, +struct intel_perf_logical_counter **counters, +uint32_t n_counters) +{ +struct intel_perf_accumulator accu; + +intel_perf_accumulate_reports (&accu, + reader->perf, reader->metric_set, + i915_report0, i915_report1); + +for (uint32_t c =0 ; c < n_counters; c++) { +struct intel_perf_logical_counter *counter = counters[c]; + +switch (counter->storage) { +case INTEL_PERF_LOGICAL_COUNTER_STORAGE_UINT64 : +case INTEL_PERF_LOGICAL_COUNTER_STORAGE_UINT32 : +case INTEL_PERF_LOGICAL_COUNTER_STORAGE_BOOL32 : +fprintf (stdout," %s: %" PRIu64"\n" , + counter->symbol_name, counter->read_uint64 (reader->perf, + reader->metric_set, + accu.deltas)); +break ; +case INTEL_PERF_LOGICAL_COUNTER_STORAGE_DOUBLE : +case INTEL_PERF_LOGICAL_COUNTER_STORAGE_FLOAT : +fprintf (stdout," %s: %f\n" , + counter->symbol_name, counter->read_float (reader->perf, + reader->metric_set, + accu.deltas)); +break ; + } + } +} +int main (int argc,char *argv[]) {const struct option long_options[] = { {"help" , no_argument,0 ,'h' }, {"counters" , required_argument,0 ,'c' }, + {"reports" , no_argument,0 ,'r' }, {0 ,0 ,0 ,0 } };struct intel_perf_data_reader reader;
@@ -179,8 +217,9 @@ main(int argc, char *argv[])const char *counter_names =NULL ;int32_t n_counters;int fd, opt; +bool print_reports = false; -while ((opt =getopt_long (argc, argv,"hc:" , long_options,NULL )) !=-1 ) { +while ((opt =getopt_long (argc, argv,"hc:r" , long_options,NULL )) !=-1 ) {switch (opt) {case 'h' :usage ();
@@ -188,6 +227,9 @@ main(int argc, char *argv[])case 'c' : counter_names = optarg;break ; +case 'r' : + print_reports = true; +break ;default :fprintf (stderr,"Internal error: " "unexpected getopt value: %d\n" , opt);
@@ -268,11 +310,6 @@ main(int argc, char *argv[])for (uint32_t i =0 ; i < reader.n_timelines; i++) {const struct intel_perf_timeline_item *item = &reader.timelines[i]; -const struct drm_i915_perf_record_header *i915_report0 = - reader.records[item->record_start]; -const struct drm_i915_perf_record_header *i915_report1 = - reader.records[item->record_end]; -struct intel_perf_accumulator accu; fprintf(stdout, "Time: CPU=0x%016" PRIx64 "-0x%016" PRIx64 " GPU=0x%016" PRIx64 "-0x%016" PRIx64"\n",
@@ -281,29 +318,20 @@ main(int argc, char *argv[])fprintf (stdout,"hw_id=0x%x %s\n" , item->hw_id, item->hw_id ==0xffffffff ?"(idle)" :"" ); -intel_perf_accumulate_reports (&accu, - reader.perf, reader.metric_set, - i915_report0, i915_report1); - -for (uint32_t c =0 ; c < n_counters; c++) { -struct intel_perf_logical_counter *counter = counters[c]; - -switch (counter->storage) { -case INTEL_PERF_LOGICAL_COUNTER_STORAGE_UINT64 : -case INTEL_PERF_LOGICAL_COUNTER_STORAGE_UINT32 : -case INTEL_PERF_LOGICAL_COUNTER_STORAGE_BOOL32 : -fprintf (stdout," %s: %" PRIu64"\n" , - counter->symbol_name, counter->read_uint64 (reader.perf, - reader.metric_set, - accu.deltas)); -break ; -case INTEL_PERF_LOGICAL_COUNTER_STORAGE_DOUBLE : -case INTEL_PERF_LOGICAL_COUNTER_STORAGE_FLOAT : -fprintf (stdout," %s: %f\n" , - counter->symbol_name, counter->read_float (reader.perf, - reader.metric_set, - accu.deltas)); -break ; +print_report_deltas (&reader, + reader.records[item->record_start], + reader.records[item->record_end], + counters, n_counters); + +if (print_reports) { +for (uint32_t r = item->record_start; r < item->record_end; r++) { +fprintf (stdout," report%i = %s\n" , + r - item->record_start, +intel_perf_read_report_reason (reader.perf, reader.records[r])); +print_report_deltas (&reader, + reader.records[r], + reader.records[r +1 ], + counters, n_counters); } } }
Signature · 1 line
2.25.1
PATCH v2 27/28 lib/i915: add new ACM/DG2 format in codegen
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
--- lib/i915/perf-configs/perf-metricset-codegen.py | 13 +++++++++++++ 1 file changed, 13 insertions(+)
lib/i915/perf-configs/perf-metricset-codegen.py +13 -0
@@ -126,6 +126,19 @@ def generate_metric_sets(args, gen): metric_set->c_offset = metric_set->b_offset + 8; metric_set->perfcnt_offset = metric_set->c_offset + 8; + """)) + elif gen.chipset.startswith("acm"): + c(textwrap.dedent("""\ + metric_set->perf_oa_format = I915_OA_FORMAT_A24u40_A14u32_B8_C8; + + metric_set->perf_raw_size = 256; + metric_set->gpu_time_offset = 0; + metric_set->gpu_clock_offset = 1; + metric_set->a_offset = 2; + metric_set->b_offset = metric_set->a_offset + 38; + metric_set->c_offset = metric_set->b_offset + 8; + metric_set->perfcnt_offset = metric_set->c_offset + 8; + """)) else: c(textwrap.dedent("""\
Signature · 1 line
2.25.1
PATCH v2 28/28 lib/i915/perf: configure OA timestamp shift and mask for ACM
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
OA reports have the timestamp value shifted to the right by 1 bits, it also means we cannot use the top bit for comparison. Configure OA timestamp shift and mask for ACM.
--- lib/i915/perf.c | 6 ++++++ 1 file changed, 6 insertions(+)
lib/i915/perf.c +6 -0
@@ -377,6 +377,12 @@ intel_perf_for_devinfo(uint32_t device_id,intel_perf_load_metrics_adl (perf); }else if (devinfo->is_dg2) { perf->devinfo.eu_threads_count =8 ; +/* OA reports have the timestamp value shifted to the +* right by 1 bits, it also means we cannot use the +* top bit for comparison. +*/ + perf->devinfo.oa_timestamp_shift =-1 ; + perf->devinfo.oa_timestamp_mask =0x7fffffff ;if (is_acm_gt1 (&perf->devinfo))intel_perf_load_metrics_acmgt1 (perf);
Signature · 1 line
2.25.1
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Second part of DG2 OA tests (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Second part of DG2 OA tests (rev2)
URL : https://patchwork.freedesktop.org/series/110141/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_12313 -> IGTPW_8004
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html
Participating hosts (37 -> 40)
------------------------------
Additional (4): fi-blb-e6850 fi-rkl-11600 fi-icl-u2 fi-apl-guc
Missing (1): fi-ctg-p8600
Known issues
------------
Here are the changes found in IGTPW_8004 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_huc_copy@huc-copy:
- fi-rkl-11600: NOTRUN -> [SKIP][1] ([i915#2190])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
- fi-icl-u2: NOTRUN -> [SKIP][2] ([i915#2190])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@gem_lmem_swapping@basic:
- fi-apl-guc: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#4613]) +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-apl-guc/igt@[email protected]
* igt@gem_lmem_swapping@parallel-random-engines:
- fi-rkl-11600: NOTRUN -> [SKIP][4] ([i915#4613]) +3 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
* igt@gem_lmem_swapping@random-engines:
- fi-icl-u2: NOTRUN -> [SKIP][5] ([i915#4613]) +3 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@gem_tiled_pread_basic:
- fi-rkl-11600: NOTRUN -> [SKIP][6] ([i915#3282])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@gem_tiled_pread_basic.html
* igt@i915_pm_backlight@basic-brightness:
- fi-rkl-11600: NOTRUN -> [SKIP][7] ([i915#3012])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-blb-e6850: NOTRUN -> [SKIP][8] ([fdo#109271]) +43 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-blb-e6850/igt@[email protected]
* igt@i915_suspend@basic-s3-without-i915:
- fi-rkl-11600: NOTRUN -> [INCOMPLETE][9] ([i915#4817])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
* igt@kms_chamelium@common-hpd-after-suspend:
- fi-rkl-guc: NOTRUN -> [SKIP][10] ([fdo#111827])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-guc/igt@[email protected]
* igt@kms_chamelium@hdmi-crc-fast:
- fi-apl-guc: NOTRUN -> [SKIP][11] ([fdo#109271] / [fdo#111827]) +8 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-apl-guc/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-rkl-11600: NOTRUN -> [SKIP][12] ([fdo#111827]) +7 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
- fi-icl-u2: NOTRUN -> [SKIP][13] ([fdo#111827]) +8 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor:
- fi-rkl-11600: NOTRUN -> [SKIP][14] ([i915#4103])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
- fi-icl-u2: NOTRUN -> [SKIP][15] ([i915#4103])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@kms_force_connector_basic@force-connector-state:
- fi-apl-guc: NOTRUN -> [SKIP][16] ([fdo#109271]) +13 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-apl-guc/igt@[email protected]
* igt@kms_force_connector_basic@force-load-detect:
- fi-rkl-11600: NOTRUN -> [SKIP][17] ([fdo#109285] / [i915#4098])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
- fi-icl-u2: NOTRUN -> [SKIP][18] ([fdo#109285])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@kms_psr@sprite_plane_onoff:
- fi-rkl-11600: NOTRUN -> [SKIP][19] ([i915#1072]) +3 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@kms_psr@sprite_plane_onoff.html
* igt@kms_setmode@basic-clone-single-crtc:
- fi-rkl-11600: NOTRUN -> [SKIP][20] ([i915#3555] / [i915#4098])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
- fi-icl-u2: NOTRUN -> [SKIP][21] ([i915#3555])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
* igt@prime_vgem@basic-read:
- fi-rkl-11600: NOTRUN -> [SKIP][22] ([fdo#109295] / [i915#3291] / [i915#3708]) +2 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
* igt@prime_vgem@basic-userptr:
- fi-icl-u2: NOTRUN -> [SKIP][23] ([fdo#109295] / [i915#3301])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-icl-u2/igt@[email protected]
- fi-rkl-11600: NOTRUN -> [SKIP][24] ([fdo#109295] / [i915#3301] / [i915#3708])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-11600/igt@[email protected]
#### Possible fixes ####
* igt@fbdev@read:
- {bat-rpls-2}: [SKIP][25] ([i915#2582]) -> [PASS][26] +4 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-rpls-2/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-rpls-2/igt@[email protected]
* igt@gem_huc_copy@huc-copy:
- {bat-dg2-8}: [FAIL][27] ([i915#7029]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-dg2-8/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-dg2-8/igt@[email protected]
* igt@i915_selftest@live@gt_heartbeat:
- fi-cfl-8109u: [DMESG-FAIL][29] ([i915#5334]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/fi-cfl-8109u/igt@i915_selftest@live@gt_heartbeat.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-cfl-8109u/igt@i915_selftest@live@gt_heartbeat.html
- fi-bxt-dsi: [DMESG-FAIL][31] ([i915#5334]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/fi-bxt-dsi/igt@i915_selftest@live@gt_heartbeat.html
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-bxt-dsi/igt@i915_selftest@live@gt_heartbeat.html
* igt@i915_selftest@live@gt_lrc:
- fi-rkl-guc: [INCOMPLETE][33] ([i915#4983]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/fi-rkl-guc/igt@i915_selftest@live@gt_lrc.html
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/fi-rkl-guc/igt@i915_selftest@live@gt_lrc.html
* igt@i915_selftest@live@hangcheck:
- {bat-dg2-8}: [INCOMPLETE][35] -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-dg2-8/igt@i915_selftest@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-dg2-8/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@hugepages:
- {bat-adln-1}: [DMESG-WARN][37] ([i915#5278]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-adln-1/igt@i915_selftest@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-adln-1/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@requests:
- {bat-rpls-1}: [INCOMPLETE][39] ([i915#4983]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-rpls-1/igt@i915_selftest@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-rpls-1/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@reset:
- {bat-rpls-2}: [DMESG-FAIL][41] ([i915#4983] / [i915#5828]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-rpls-2/igt@i915_selftest@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-rpls-2/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@slpc:
- {bat-adln-1}: [DMESG-FAIL][43] ([i915#6997]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-adln-1/igt@i915_selftest@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-adln-1/igt@i915_selftest@[email protected]
* igt@kms_frontbuffer_tracking@basic:
- {bat-rpls-2}: [SKIP][45] ([i915#1849]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-rpls-2/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-rpls-2/igt@[email protected]
* igt@prime_vgem@basic-fence-flip:
- {bat-rpls-2}: [SKIP][47] ([fdo#109295] / [i915#1845] / [i915#3708]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/bat-rpls-2/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/bat-rpls-2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#3012]: https://gitlab.freedesktop.org/drm/intel/issues/3012
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4817]: https://gitlab.freedesktop.org/drm/intel/issues/4817
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5278]: https://gitlab.freedesktop.org/drm/intel/issues/5278
[i915#5334]: https://gitlab.freedesktop.org/drm/intel/issues/5334
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5828]: https://gitlab.freedesktop.org/drm/intel/issues/5828
[i915#6559]: https://gitlab.freedesktop.org/drm/intel/issues/6559
[i915#6645]: https://gitlab.freedesktop.org/drm/intel/issues/6645
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#6997]: https://gitlab.freedesktop.org/drm/intel/issues/6997
[i915#7029]: https://gitlab.freedesktop.org/drm/intel/issues/7029
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7028 -> IGTPW_8004
CI-20190529: 20190529
CI_DRM_12313: 9d6a004b1594b83b2d94776daa23757892423837 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8004: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html
IGT_7028: 9e635a1c502970e7e6d64112d409392a2f01c688 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Second part of DG2 OA tests (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Second part of DG2 OA tests (rev2)
URL : https://patchwork.freedesktop.org/series/110141/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_12313_full -> IGTPW_8004_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html
Participating hosts (11 -> 8)
------------------------------
Missing (3): pig-skl-6260u pig-kbl-iris pig-glk-j5005
Known issues
------------
Here are the changes found in IGTPW_8004_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@feature_discovery@psr2:
- shard-iclb: [PASS][1] -> [SKIP][2] ([i915#658])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
* igt@gem_create@create-ext-cpu-access-sanity-check:
- shard-tglb: NOTRUN -> [SKIP][3] ([i915#6335])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][4] ([i915#6335])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@gem_ctx_exec@basic-nohangcheck:
- shard-tglb: [PASS][5] -> [FAIL][6] ([i915#6268])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-tglb2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb8/igt@[email protected]
* igt@gem_ctx_persistence@hang:
- shard-snb: NOTRUN -> [SKIP][7] ([fdo#109271] / [i915#1099])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-snb5/igt@[email protected]
* igt@gem_exec_balancer@parallel-keep-in-fence:
- shard-iclb: [PASS][8] -> [SKIP][9] ([i915#4525])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb1/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-tglb: [PASS][10] -> [FAIL][11] ([i915#2842])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-tglb6/igt@gem_exec_fair@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb5/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none@bcs0:
- shard-tglb: NOTRUN -> [FAIL][12] ([i915#2842]) +4 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none@rcs0:
- shard-glk: NOTRUN -> [FAIL][13] ([i915#2842])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk8/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none@vecs0:
- shard-iclb: NOTRUN -> [FAIL][14] ([i915#2842]) +3 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb3/igt@gem_exec_fair@[email protected]
* igt@gem_exec_suspend@basic-s3@smem:
- shard-apl: [PASS][15] -> [DMESG-WARN][16] ([i915#180]) +2 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl7/igt@gem_exec_suspend@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl1/igt@gem_exec_suspend@[email protected]
* igt@gem_huc_copy@huc-copy:
- shard-tglb: [PASS][17] -> [SKIP][18] ([i915#2190])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-tglb5/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
* igt@gem_lmem_swapping@massive-random:
- shard-glk: NOTRUN -> [SKIP][19] ([fdo#109271] / [i915#4613])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][20] ([i915#4613])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][21] ([fdo#109271] / [i915#4613])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][22] ([i915#4613])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
* igt@gem_pxp@verify-pxp-stale-ctx-execution:
- shard-iclb: NOTRUN -> [SKIP][23] ([i915#4270])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@gem_render_copy@y-tiled-to-vebox-yf-tiled:
- shard-iclb: NOTRUN -> [SKIP][24] ([i915#768]) +1 similar issue
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb3/igt@[email protected]
* igt@gem_softpin@evict-snoop:
- shard-tglb: NOTRUN -> [SKIP][25] ([fdo#109312])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#109312])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
* igt@gem_userptr_blits@access-control:
- shard-glk: NOTRUN -> [SKIP][27] ([fdo#109271]) +57 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk5/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][28] ([i915#3297])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][29] ([i915#3297])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
* igt@gen7_exec_parse@basic-rejected:
- shard-iclb: NOTRUN -> [SKIP][30] ([fdo#109289]) +4 similar issues
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@gen7_exec_parse@chained-batch:
- shard-tglb: NOTRUN -> [SKIP][31] ([fdo#109289]) +3 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
* igt@gen9_exec_parse@valid-registers:
- shard-iclb: NOTRUN -> [SKIP][32] ([i915#2856])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][33] ([fdo#109271] / [i915#1937])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl3/igt@i915_pm_lpsp@[email protected]
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-hdmi-a:
- shard-glk: NOTRUN -> [SKIP][34] ([fdo#109271] / [i915#1937])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk9/igt@i915_pm_lpsp@[email protected]
* igt@i915_query@query-topology-known-pci-ids:
- shard-tglb: NOTRUN -> [SKIP][35] ([fdo#109303])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][36] ([fdo#109303])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@i915_selftest@live@sanitycheck:
- shard-snb: [PASS][37] -> [SKIP][38] ([fdo#109271])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-snb6/igt@i915_selftest@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-snb7/igt@i915_selftest@[email protected]
* igt@i915_suspend@sysfs-reader:
- shard-snb: [PASS][39] -> [DMESG-WARN][40] ([i915#5090])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-snb2/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-snb5/igt@[email protected]
* igt@kms_addfb_basic@invalid-smem-bo-on-discrete:
- shard-tglb: NOTRUN -> [SKIP][41] ([i915#3826])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][42] ([i915#3826])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@kms_big_fb@4-tiled-addfb-size-offset-overflow:
- shard-iclb: NOTRUN -> [SKIP][43] ([i915#5286]) +2 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-0:
- shard-tglb: NOTRUN -> [SKIP][44] ([i915#5286]) +1 similar issue
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
* igt@kms_big_fb@yf-tiled-8bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][45] ([fdo#111615]) +3 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-0:
- shard-iclb: [PASS][46] -> [FAIL][47] ([i915#5138])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb5/igt@[email protected]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-180-hflip:
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#110723]) +3 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@kms_ccs@pipe-a-bad-aux-stride-y_tiled_gen12_rc_ccs_cc:
- shard-iclb: NOTRUN -> [SKIP][49] ([fdo#109278] / [i915#3886]) +2 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@kms_ccs@pipe-a-bad-aux-stride-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-a-crc-primary-basic-y_tiled_gen12_mc_ccs:
- shard-apl: NOTRUN -> [SKIP][50] ([fdo#109271] / [i915#3886]) +2 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl7/igt@kms_ccs@pipe-a-crc-primary-basic-y_tiled_gen12_mc_ccs.html
- shard-tglb: NOTRUN -> [SKIP][51] ([i915#3689] / [i915#3886])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb1/igt@kms_ccs@pipe-a-crc-primary-basic-y_tiled_gen12_mc_ccs.html
- shard-glk: NOTRUN -> [SKIP][52] ([fdo#109271] / [i915#3886])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk1/igt@kms_ccs@pipe-a-crc-primary-basic-y_tiled_gen12_mc_ccs.html
* igt@kms_ccs@pipe-b-bad-rotation-90-4_tiled_dg2_rc_ccs:
- shard-tglb: NOTRUN -> [SKIP][53] ([i915#3689] / [i915#6095]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@kms_ccs@pipe-b-bad-rotation-90-4_tiled_dg2_rc_ccs.html
* igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_ccs:
- shard-snb: NOTRUN -> [SKIP][54] ([fdo#109271]) +188 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-snb4/igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_ccs.html
* igt@kms_ccs@pipe-c-ccs-on-another-bo-yf_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][55] ([fdo#111615] / [i915#3689]) +3 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@kms_ccs@pipe-c-ccs-on-another-bo-yf_tiled_ccs.html
* igt@kms_ccs@pipe-c-crc-primary-basic-4_tiled_dg2_rc_ccs:
- shard-tglb: NOTRUN -> [SKIP][56] ([i915#6095]) +1 similar issue
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb5/igt@kms_ccs@pipe-c-crc-primary-basic-4_tiled_dg2_rc_ccs.html
* igt@kms_ccs@pipe-d-crc-primary-basic-y_tiled_ccs:
- shard-iclb: NOTRUN -> [SKIP][57] ([fdo#109278]) +23 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@kms_ccs@pipe-d-crc-primary-basic-y_tiled_ccs.html
* igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_gen12_mc_ccs:
- shard-tglb: NOTRUN -> [SKIP][58] ([i915#3689]) +8 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_gen12_mc_ccs.html
* igt@kms_cdclk@mode-transition:
- shard-iclb: NOTRUN -> [SKIP][59] ([i915#3742])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@kms_chamelium@dp-edid-read:
- shard-glk: NOTRUN -> [SKIP][60] ([fdo#109271] / [fdo#111827]) +4 similar issues
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk7/igt@[email protected]
* igt@kms_chamelium@hdmi-crc-nonplanar-formats:
- shard-snb: NOTRUN -> [SKIP][61] ([fdo#109271] / [fdo#111827]) +4 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-snb2/igt@[email protected]
* igt@kms_chamelium@vga-hpd:
- shard-apl: NOTRUN -> [SKIP][62] ([fdo#109271] / [fdo#111827]) +5 similar issues
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][63] ([fdo#109284] / [fdo#111827]) +4 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb1/igt@[email protected]
* igt@kms_color_chamelium@degamma:
- shard-iclb: NOTRUN -> [SKIP][64] ([fdo#109284] / [fdo#111827]) +5 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_content_protection@srm:
- shard-iclb: NOTRUN -> [SKIP][65] ([i915#7118])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_cursor_crc@cursor-onscreen-512x170:
- shard-iclb: NOTRUN -> [SKIP][66] ([fdo#109279] / [i915#3359])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_cursor_crc@cursor-onscreen-512x512:
- shard-iclb: NOTRUN -> [SKIP][67] ([i915#3359])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][68] ([i915#3359])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb6/igt@[email protected]
* igt@kms_cursor_crc@cursor-rapid-movement-max-size:
- shard-tglb: NOTRUN -> [SKIP][69] ([i915#3555]) +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb8/igt@[email protected]
* igt@kms_cursor_legacy@2x-flip-vs-cursor-atomic:
- shard-tglb: NOTRUN -> [SKIP][70] ([fdo#109274] / [fdo#111825]) +1 similar issue
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb8/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor@atomic-transitions:
- shard-glk: [PASS][71] -> [FAIL][72] ([i915#2346])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk5/igt@kms_cursor_legacy@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk3/igt@kms_cursor_legacy@[email protected]
* igt@kms_dp_tiled_display@basic-test-pattern-with-chamelium:
- shard-tglb: NOTRUN -> [SKIP][73] ([i915#3528])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][74] ([i915#3528])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_flip@2x-flip-vs-dpms-off-vs-modeset:
- shard-iclb: NOTRUN -> [SKIP][75] ([fdo#109274]) +6 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
* igt@kms_flip@2x-flip-vs-modeset:
- shard-tglb: NOTRUN -> [SKIP][76] ([fdo#109274] / [fdo#111825] / [i915#3637]) +2 similar issues
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank-interruptible@a-dp1:
- shard-apl: [PASS][77] -> [FAIL][78] ([i915#79])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl6/igt@kms_flip@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl3/igt@kms_flip@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-yftile-to-32bpp-yftileccs-downscaling@pipe-a-valid-mode:
- shard-tglb: NOTRUN -> [SKIP][79] ([i915#2587] / [i915#2672]) +1 similar issue
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@kms_flip_scaled_crc@flip-32bpp-yftile-to-32bpp-yftileccs-downscaling@pipe-a-valid-mode.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode:
- shard-iclb: [PASS][80] -> [SKIP][81] ([i915#3555])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb3/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-downscaling@pipe-a-valid-mode:
- shard-iclb: NOTRUN -> [SKIP][82] ([i915#2587] / [i915#2672]) +2 similar issues
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-downscaling@pipe-a-valid-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-linear-to-32bpp-linear-downscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][83] ([i915#3555]) +2 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-linear-to-32bpp-linear-downscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-32bpp-yftile-upscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][84] ([i915#2672]) +6 similar issues
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-32bpp-yftile-upscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs-downscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][85] ([i915#2672] / [i915#3555])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs-downscaling@pipe-a-default-mode.html
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-indfb-msflip-blt:
- shard-glk: [PASS][86] -> [FAIL][87] ([i915#2546])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk2/igt@[email protected]
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk5/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-shrfb-draw-blt:
- shard-tglb: NOTRUN -> [SKIP][88] ([fdo#109280] / [fdo#111825]) +20 similar issues
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-modesetfrombusy:
- shard-tglb: NOTRUN -> [SKIP][89] ([i915#6497]) +8 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-shrfb-pgflip-blt:
- shard-iclb: NOTRUN -> [SKIP][90] ([fdo#109280]) +26 similar issues
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-draw-render:
- shard-apl: NOTRUN -> [SKIP][91] ([fdo#109271]) +76 similar issues
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl3/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-draw-render.html
* igt@kms_plane_alpha_blend@constant-alpha-max@pipe-b-dp-1:
- shard-apl: NOTRUN -> [FAIL][92] ([i915#4573]) +2 similar issues
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl2/igt@kms_plane_alpha_blend@[email protected]
* igt@kms_plane_alpha_blend@constant-alpha-max@pipe-c-hdmi-a-1:
- shard-glk: NOTRUN -> [FAIL][93] ([i915#4573]) +2 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk6/igt@kms_plane_alpha_blend@[email protected]
* igt@kms_plane_scaling@plane-downscale-with-pixel-format-factor-0-5@pipe-b-edp-1:
- shard-iclb: [PASS][94] -> [SKIP][95] ([i915#5176]) +2 similar issues
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb3/igt@kms_plane_scaling@[email protected]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_plane_scaling@[email protected]
* igt@kms_prime@d3hot:
- shard-iclb: NOTRUN -> [SKIP][96] ([i915#6524])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-move-continuous-exceed-fully-sf:
- shard-iclb: NOTRUN -> [SKIP][97] ([i915#658])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@[email protected]
* igt@kms_psr2_sf@plane-move-sf-dmg-area:
- shard-apl: NOTRUN -> [SKIP][98] ([fdo#109271] / [i915#658]) +4 similar issues
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][99] ([i915#2920]) +3 similar issues
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][100] ([fdo#109271] / [i915#658]) +4 similar issues
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][101] ([fdo#111068] / [i915#658]) +2 similar issues
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
* igt@kms_psr2_su@page_flip-p010:
- shard-tglb: NOTRUN -> [SKIP][102] ([i915#7037])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb3/igt@kms_psr2_su@page_flip-p010.html
* igt@kms_psr2_su@page_flip-p010@pipe-b-edp-1:
- shard-iclb: NOTRUN -> [FAIL][103] ([i915#5939]) +5 similar issues
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_psr2_su@[email protected]
* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [PASS][104] -> [SKIP][105] ([fdo#109441])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb7/igt@kms_psr@psr2_cursor_plane_move.html
* igt@kms_psr@psr2_primary_page_flip:
- shard-tglb: NOTRUN -> [FAIL][106] ([i915#132] / [i915#3467]) +1 similar issue
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb7/igt@kms_psr@psr2_primary_page_flip.html
- shard-iclb: NOTRUN -> [SKIP][107] ([fdo#109441]) +2 similar issues
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@kms_psr@psr2_primary_page_flip.html
* igt@kms_rotation_crc@primary-4-tiled-reflect-x-0:
- shard-tglb: NOTRUN -> [SKIP][108] ([i915#5289])
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][109] ([i915#5289])
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb3/igt@[email protected]
* igt@kms_tv_load_detect@load-detect:
- shard-tglb: NOTRUN -> [SKIP][110] ([fdo#109309])
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb5/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][111] ([fdo#109309])
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb1/igt@[email protected]
* igt@kms_writeback@writeback-pixel-formats:
- shard-apl: NOTRUN -> [SKIP][112] ([fdo#109271] / [i915#2437])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][113] ([i915#2437])
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][114] ([fdo#109271] / [i915#2437])
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][115] ([i915#2437])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@perf@stress-open-close:
- shard-glk: [PASS][116] -> [INCOMPLETE][117] ([i915#5213])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk3/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk3/igt@[email protected]
* igt@sysfs_clients@split-50:
- shard-tglb: NOTRUN -> [SKIP][118] ([i915#2994])
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][119] ([fdo#109271] / [i915#2994])
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][120] ([i915#2994]) +1 similar issue
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_persistence@engines-hang@bcs0:
- {shard-rkl}: [SKIP][121] ([i915#6252]) -> [PASS][122]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-5/igt@gem_ctx_persistence@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-1/igt@gem_ctx_persistence@[email protected]
* igt@gem_exec_fair@basic-deadline:
- shard-glk: [FAIL][123] ([i915#2846]) -> [PASS][124]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk7/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk2/igt@[email protected]
* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-apl: [FAIL][125] ([i915#2842]) -> [PASS][126]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl7/igt@gem_exec_fair@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl3/igt@gem_exec_fair@[email protected]
* igt@gem_exec_reloc@basic-gtt-cpu-noreloc:
- {shard-rkl}: [SKIP][127] ([i915#3281]) -> [PASS][128]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-1/igt@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-5/igt@[email protected]
* igt@gem_pread@bench:
- {shard-rkl}: [SKIP][129] ([i915#3282]) -> [PASS][130] +3 similar issues
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-4/igt@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-5/igt@[email protected]
* igt@gem_softpin@evict-single-offset:
- shard-tglb: [FAIL][131] ([i915#4171]) -> [PASS][132]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-tglb1/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
- {shard-rkl}: [FAIL][133] ([i915#4171]) -> [PASS][134]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-5/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-3/igt@[email protected]
* igt@gen9_exec_parse@bb-secure:
- {shard-rkl}: [SKIP][135] ([i915#2527]) -> [PASS][136]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-1/igt@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-5/igt@[email protected]
* igt@i915_pm_dc@dc6-dpms:
- shard-iclb: [FAIL][137] ([i915#3989] / [i915#454]) -> [PASS][138] +1 similar issue
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb3/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb1/igt@[email protected]
* igt@i915_pm_dc@dc9-dpms:
- {shard-rkl}: [SKIP][139] ([i915#3361]) -> [PASS][140]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-rkl-5/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-rkl-4/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle@bcs0:
- {shard-dg1}: [FAIL][141] ([i915#3591]) -> [PASS][142]
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-dg1-15/igt@i915_pm_rc6_residency@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-dg1-19/igt@i915_pm_rc6_residency@[email protected]
* igt@kms_flip_scaled_crc@flip-64bpp-linear-to-16bpp-linear-downscaling@pipe-a-default-mode:
- shard-iclb: [SKIP][143] ([i915#3555]) -> [PASS][144]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-linear-to-16bpp-linear-downscaling@pipe-a-default-mode.html
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb3/igt@kms_flip_scaled_crc@flip-64bpp-linear-to-16bpp-linear-downscaling@pipe-a-default-mode.html
* igt@kms_psr@psr2_primary_mmap_cpu:
- shard-iclb: [SKIP][145] ([fdo#109441]) -> [PASS][146] +1 similar issue
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb3/igt@kms_psr@psr2_primary_mmap_cpu.html
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html
* igt@kms_rotation_crc@sprite-rotation-90:
- shard-glk: [FAIL][147] -> [PASS][148]
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk9/igt@[email protected]
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk7/igt@[email protected]
#### Warnings ####
* igt@gem_pwrite@basic-exhaustion:
- shard-tglb: [INCOMPLETE][149] ([i915#7248]) -> [WARN][150] ([i915#2658])
[149]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-tglb6/igt@[email protected]
[150]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-tglb2/igt@[email protected]
- shard-glk: [INCOMPLETE][151] ([i915#7248]) -> [WARN][152] ([i915#2658])
[151]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-glk3/igt@[email protected]
[152]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-glk8/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle@bcs0:
- shard-iclb: [WARN][153] ([i915#2684]) -> [FAIL][154] ([i915#2684])
[153]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb7/igt@i915_pm_rc6_residency@[email protected]
[154]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb5/igt@i915_pm_rc6_residency@[email protected]
* igt@kms_psr2_sf@overlay-plane-move-continuous-exceed-sf:
- shard-iclb: [SKIP][155] ([i915#658]) -> [SKIP][156] ([i915#2920]) +2 similar issues
[155]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb7/igt@[email protected]
[156]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area:
- shard-iclb: [SKIP][157] ([fdo#111068] / [i915#658]) -> [SKIP][158] ([i915#2920])
[157]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb3/igt@[email protected]
[158]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb2/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-big-fb:
- shard-iclb: [SKIP][159] ([i915#2920]) -> [SKIP][160] ([i915#658]) +1 similar issue
[159]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-iclb2/igt@[email protected]
[160]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-iclb6/igt@[email protected]
* igt@runner@aborted:
- shard-apl: ([FAIL][161], [FAIL][162], [FAIL][163], [FAIL][164], [FAIL][165], [FAIL][166], [FAIL][167]) ([i915#3002] / [i915#4312]) -> ([FAIL][168], [FAIL][169], [FAIL][170], [FAIL][171], [FAIL][172], [FAIL][173], [FAIL][174], [FAIL][175], [FAIL][176], [FAIL][177]) ([i915#180] / [i915#3002] / [i915#4312])
[161]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl7/igt@[email protected]
[162]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl6/igt@[email protected]
[163]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl3/igt@[email protected]
[164]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl6/igt@[email protected]
[165]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl7/igt@[email protected]
[166]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl3/igt@[email protected]
[167]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12313/shard-apl6/igt@[email protected]
[168]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl8/igt@[email protected]
[169]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl3/igt@[email protected]
[170]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl1/igt@[email protected]
[171]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl6/igt@[email protected]
[172]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl2/igt@[email protected]
[173]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl1/igt@[email protected]
[174]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl8/igt@[email protected]
[175]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl7/igt@[email protected]
[176]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl8/igt@[email protected]
[177]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/shard-apl6/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109283]: https://bugs.freedesktop.org/show_bug.cgi?id=109283
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109303]: https://bugs.freedesktop.org/show_bug.cgi?id=109303
[fdo#109308]: https://bugs.freedesktop.org/show_bug.cgi?id=109308
[fdo#109309]: https://bugs.freedesktop.org/show_bug.cgi?id=109309
[fdo#109312]: https://bugs.freedesktop.org/show_bug.cgi?id=109312
[fdo#109313]: https://bugs.freedesktop.org/show_bug.cgi?id=109313
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111656]: https://bugs.freedesktop.org/show_bug.cgi?id=111656
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112054]: https://bugs.freedesktop.org/show_bug.cgi?id=112054
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#1155]: https://gitlab.freedesktop.org/drm/intel/issues/1155
[i915#132]: https://gitlab.freedesktop.org/drm/intel/issues/132
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1755]: https://gitlab.freedesktop.org/drm/intel/issues/1755
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#1850]: https://gitlab.freedesktop.org/drm/intel/issues/1850
[i915#1937]: https://gitlab.freedesktop.org/drm/intel/issues/1937
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2433]: https://gitlab.freedesktop.org/drm/intel/issues/2433
[i915#2435]: https://gitlab.freedesktop.org/drm/intel/issues/2435
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2546]: https://gitlab.freedesktop.org/drm/intel/issues/2546
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2684]: https://gitlab.freedesktop.org/drm/intel/issues/2684
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#2994]: https://gitlab.freedesktop.org/drm/intel/issues/2994
[i915#3002]: https://gitlab.freedesktop.org/drm/intel/issues/3002
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3318]: https://gitlab.freedesktop.org/drm/intel/issues/3318
[i915#3323]: https://gitlab.freedesktop.org/drm/intel/issues/3323
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3361]: https://gitlab.freedesktop.org/drm/intel/issues/3361
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3467]: https://gitlab.freedesktop.org/drm/intel/issues/3467
[i915#3528]: https://gitlab.freedesktop.org/drm/intel/issues/3528
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3558]: https://gitlab.freedesktop.org/drm/intel/issues/3558
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3826]: https://gitlab.freedesktop.org/drm/intel/issues/3826
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#3989]: https://gitlab.freedesktop.org/drm/intel/issues/3989
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4171]: https://gitlab.freedesktop.org/drm/intel/issues/4171
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4525]: https://gitlab.freedesktop.org/drm/intel/issues/4525
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#4573]: https://gitlab.freedesktop.org/drm/intel/issues/4573
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4771]: https://gitlab.freedesktop.org/drm/intel/issues/4771
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4859]: https://gitlab.freedesktop.org/drm/intel/issues/4859
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4874]: https://gitlab.freedesktop.org/drm/intel/issues/4874
[i915#4877]: https://gitlab.freedesktop.org/drm/intel/issues/4877
[i915#4881]: https://gitlab.freedesktop.org/drm/intel/issues/4881
[i915#4885]: https://gitlab.freedesktop.org/drm/intel/issues/4885
[i915#5090]: https://gitlab.freedesktop.org/drm/intel/issues/5090
[i915#5138]: https://gitlab.freedesktop.org/drm/intel/issues/5138
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5213]: https://gitlab.freedesktop.org/drm/intel/issues/5213
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5288]: https://gitlab.freedesktop.org/drm/intel/issues/5288
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#5327]: https://gitlab.freedesktop.org/drm/intel/issues/5327
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5939]: https://gitlab.freedesktop.org/drm/intel/issues/5939
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6227]: https://gitlab.freedesktop.org/drm/intel/issues/6227
[i915#6245]: https://gitlab.freedesktop.org/drm/intel/issues/6245
[i915#6247]: https://gitlab.freedesktop.org/drm/intel/issues/6247
[i915#6248]: https://gitlab.freedesktop.org/drm/intel/issues/6248
[i915#6252]: https://gitlab.freedesktop.org/drm/intel/issues/6252
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6301]: https://gitlab.freedesktop.org/drm/intel/issues/6301
[i915#6335]: https://gitlab.freedesktop.org/drm/intel/issues/6335
[i915#6433]: https://gitlab.freedesktop.org/drm/intel/issues/6433
[i915#6497]: https://gitlab.freedesktop.org/drm/intel/issues/6497
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#7037]: https://gitlab.freedesktop.org/drm/intel/issues/7037
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7248]: https://gitlab.freedesktop.org/drm/intel/issues/7248
[i915#7276]: https://gitlab.freedesktop.org/drm/intel/issues/7276
[i915#768]: https://gitlab.freedesktop.org/drm/intel/issues/768
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7028 -> IGTPW_8004
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_12313: 9d6a004b1594b83b2d94776daa23757892423837 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8004: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html
IGT_7028: 9e635a1c502970e7e6d64112d409392a2f01c688 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8004/index.html