sched/sched_stress: Modify sched driver
PATCH 1/3 sched/sched_stress: Modify sched driver
Ping?
Message: 1
Date: Tue, 1 Dec 2020 19:49:24 +0800
From: Luo Fenglin <[email protected]>
To: <[email protected]>
Cc: <[email protected]>, <[email protected]>,
luofenglin <[email protected]>
Subject: [LTP] [PATCH 1/3] sched/sched_stress: Modify sched driver
param to run long term testcases
Message-ID:
<[email protected]>
Content-Type: text/plain
From: luofenglin <[email protected]>
Add sched_driver process slots param to 10, then long term testcases can run. Additionally, add sched_driver run time 0.05 hour, long term testcases run 1/5 of total time.
--- testcases/kernel/sched/sched_stress/sched_driver.c | 6 +++++- testcases/kernel/sched/sched_stress/sched_stress.sh | 3 ++- 2 files changed, 7 insertions(+), 2 deletions(-)
testcases/kernel/sched/sched_stress/sched_driver.c +5 -1
@@ -202,8 +202,12 @@ int main(int argc, char **argv)/* * Start the long-term testcases running +* Run time set 1/5 of total */ -start_long_term_testcases (long_term_slot_total, argv[2 ]); +char run_long_term_time[20 ]; +int runlongtime = runseconds /5 ; +sprintf (run_long_term_time,"%d" , runlongtime); +start_long_term_testcases (long_term_slot_total, run_long_term_time); short_term_slot_total = workslots /2 ;fflush (stdout);
testcases/kernel/sched/sched_stress/sched_stress.sh +2 -1
@@ -30,6 +30,7 @@ export KERNEL=./sched_datafile touch $KERNEL echo 0.000000 > sch.measure export RAWDEV=`df / | grep dev | awk {'print $1'}` -sched_driver -s 0.9 -t 0.02 -p 2 > /tmp/tmp$$ +echo "Result file: /tmp/tmp$$" +sched_driver -s 0.9 -t 0.05 -p 10 -d > /tmp/tmp$$ tail -n 5 /tmp/tmp$$ rm -rf /tmp/tmp$$ ./sched_datafile sch.measure --
2.17.1
------------------------------
Message: 2
Date: Tue, 1 Dec 2020 19:49:25 +0800
From: Luo Fenglin <[email protected]>
To: <[email protected]>
Cc: <[email protected]>, <[email protected]>,
luofenglin <[email protected]>
Subject: [LTP] [PATCH 2/3] sched/sched_stress: Fixed param of sched_tc Message-ID:
<[email protected]>
Content-Type: text/plain
From: luofenglin <[email protected]>
Rt flag of sched_tc must like "-pfixed" or "-pvariable"
--- .../kernel/sched/sched_stress/sched_driver.c | 51 ++++++++++--------- 1 file changed, 27 insertions(+), 24 deletions(-)
testcases/kernel/sched/sched_stress/sched_driver.c +29 -24
73 lines not on this page · raw message
#if 0
--
2.17.1
------------------------------
Message: 3
Date: Tue, 1 Dec 2020 19:49:26 +0800
From: Luo Fenglin <[email protected]>
To: <[email protected]>
Cc: <[email protected]>, <[email protected]>,
luofenglin <[email protected]>
Subject: [LTP] [PATCH 3/3] sched/sched_stress: Bugfix for setting real
time priority
Message-ID:
<[email protected]>
Content-Type: text/plain
From: luofenglin <[email protected]>
When real time flag is set, setpriority function is used for user-time policy setting, here use sched_setscheduler to set real time policy RR instead
--- testcases/kernel/sched/sched_stress/sched.h | 2 ++ testcases/kernel/sched/sched_stress/sched_tc0.c | 10 ++++++---- testcases/kernel/sched/sched_stress/sched_tc1.c | 10 ++++++---- testcases/kernel/sched/sched_stress/sched_tc2.c | 10 ++++++---- testcases/kernel/sched/sched_stress/sched_tc3.c | 10 ++++++---- testcases/kernel/sched/sched_stress/sched_tc4.c | 9 +++++---- testcases/kernel/sched/sched_stress/sched_tc5.c | 9 +++++---- testcases/kernel/sched/sched_stress/sched_tc6.c | 8 +++++--- 8 files changed, 41 insertions(+), 27 deletions(-)
testcases/kernel/sched/sched_stress/sched.h +3 -0
@@ -46,8 +46,10 @@#include <time.h> #include <errno.h> #include <stdio.h> +#include <sched.h> #define DEFAULT_PRIORITY 70 +#define SET_RT_SCHEDULER (paraA, paraB, paraC) sched_setscheduler(paraA, +paraB, paraC)#if 0
int openlog (char *);
testcases/kernel/sched/sched_stress/sched_tc0.c +3 -1
@@ -90,7 +90,9 @@ int verbose = 0;int debug =0 ;long execution_time =DEFAULT_EXECUTION_TIME ;char *priority =DEFAULT_PRIORITY_TYPE ; - +struct sched_param param = { + .sched_priority =DEFAULT_PRIORITY +};/*---------------------------------------------------------------------+ | main | | ==================================================================== | @@ -127,10 +129,10 @@ int main(int argc, char **argv) if (!strcmp(priority, "fixed")) {
#ifndef __linux__
if (setpri(0, DEFAULT_PRIORITY) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#else
- if (setpriority(PRIO_PROCESS, 0, 0) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ if (SET_RT_SCHEDULER(0, SCHED_RR, ¶m) < 0)
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#endif
}
testcases/kernel/sched/sched_stress/sched_tc1.c +6 -4
@@ -72,7 +72,9 @@void process_file (char *);void parse_args (int ,char **);void signal_handler (); - +struct sched_param param = { + .sched_priority =DEFAULT_PRIORITY +};/* * Global variables: *
@@ -128,10 +130,10 @@ int main(int argc, char **argv)if (!strcmp (priority,"fixed" )) {#ifndef __linux__if (setpri (0 ,DEFAULT_PRIORITY ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); +sys_error ("set rt pri failed" , __FILE__, __LINE__);#else -if (setpriority (PRIO_PROCESS ,0 ,0 ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); +if (SET_RT_SCHEDULER (0 ,SCHED_RR , ¶m) <0 ) +sys_error ("set rt pri failed" , __FILE__, __LINE__);#endif }
testcases/kernel/sched/sched_stress/sched_tc2.c +6 -4
@@ -47,7 +47,9 @@#include <sys/time.h> #include <sys/resource.h> #include "sched.h" - +struct sched_param param = { + .sched_priority =DEFAULT_PRIORITY +};/* * Defines: *
@@ -129,10 +131,10 @@ int main(int argc, char **argv)if (!strcmp (priority,"fixed" )) {#ifndef __linux__if (setpri (0 ,DEFAULT_PRIORITY ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); +sys_error ("set rt pri failed" , __FILE__, __LINE__);#else -if (setpriority (PRIO_PROCESS ,0 ,0 ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); +if (SET_RT_SCHEDULER (0 ,SCHED_RR , ¶m) <0 ) +sys_error ("set rt pri failed" , __FILE__, __LINE__);#endif }
testcases/kernel/sched/sched_stress/sched_tc3.c +3 -1
@@ -95,7 +95,9 @@ int verbose = 0;int debug =0 ;int signaled =0 ;char *priority =DEFAULT_PRIORITY_TYPE ; - +struct sched_param param = { + .sched_priority =DEFAULT_PRIORITY +};/*---------------------------------------------------------------------+ | main | | ==================================================================== | @@ -131,10 +133,10 @@ int main(int argc, char **argv)
if (!strcmp(priority, "fixed")) {
#ifndef __linux__
if (setpri(0, DEFAULT_PRIORITY) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#else
- if (setpriority(PRIO_PROCESS, 0, 0) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ if (SET_RT_SCHEDULER(0, SCHED_RR, ¶m) < 0)
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#endif
}
testcases/kernel/sched/sched_stress/sched_tc4.c +1 -1
@@ -99,7 +99,7 @@ int debug = 0;int priority =DEFAULT_PRIORITY ;char *logfile =DEFAULT_LOGFILE ;char *priority_type =DEFAULT_PRIORITY_TYPE ; - +struct sched_param param;/*---------------------------------------------------------------------+ | main | | ==================================================================== | @@ -133,10 +133,11 @@ int main(int argc, char **argv)
if (!strcmp(priority_type, "fixed")) { #ifndef __linux__
if (setpri(0, DEFAULT_PRIORITY) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#else
- if (setpriority(PRIO_PROCESS, 0, 0) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ param.sched_priority = priority;
+ if (SET_RT_SCHEDULER(0, SCHED_RR, ¶m) < 0)
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#endif
} else {
if (nice((priority - 50) - (nice(0) + 20)) < 0 && errno != 0) diff --git a/testcases/kernel/sched/sched_stress/sched_tc5.c b/testcases/kernel/sched/sched_stress/sched_tc5.c
index db5ce963c..c315f9ade 100644
testcases/kernel/sched/sched_stress/sched_tc5.c +1 -1
@@ -95,7 +95,7 @@ int debug = 0;int priority =DEFAULT_PRIORITY ;char *logfile =DEFAULT_LOGFILE ;char *priority_type =DEFAULT_PRIORITY_TYPE ; - +struct sched_param param;/*---------------------------------------------------------------------+ | main | | ==================================================================== | @@ -130,10 +130,11 @@ int main(int argc, char **argv)
if (!strcmp(priority_type, "fixed")) { #ifndef __linux__
if (setpri(0, DEFAULT_PRIORITY) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#else
- if (setpriority(PRIO_PROCESS, 0, 0) < 0)
- sys_error("setpri failed", __FILE__, __LINE__);
+ param.sched_priority = priority;
+ if (SET_RT_SCHEDULER(0, SCHED_RR, ¶m) < 0)
+ sys_error("set rt pri failed", __FILE__, __LINE__);
#endif
} else {
if (nice((priority - 50) - (nice(0) + 20)) < 0 && errno != 0) diff --git a/testcases/kernel/sched/sched_stress/sched_tc6.c b/testcases/kernel/sched/sched_stress/sched_tc6.c
index e70e8f250..20987f571 100644
testcases/kernel/sched/sched_stress/sched_tc6.c +5 -4
@@ -117,6 +117,7 @@ char *logfile = DEFAULT_LOGFILE; char *priority_type = DEFAULT_PRIORITY_TYPE; struct flock flock_struct; struct flock *flock_ptr = &flock_struct; +struct sched_param param;int open_file (char *,int );
@@ -163,10 +164,11 @@ int main(int argc, char **argv)if (!strcmp (priority_type,"fixed" )) {#ifndef __linux__if (setpri (0 ,DEFAULT_PRIORITY ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); +sys_error ("set rt pri failed" , __FILE__, __LINE__);#else -if (setpriority (PRIO_PROCESS ,0 ,0 ) <0 ) -sys_error ("setpri failed" , __FILE__, __LINE__); + param.sched_priority = priority; +if (SET_RT_SCHEDULER (0 ,SCHED_RR , ¶m) <0 ) +sys_error ("set rt pri failed" , __FILE__, __LINE__);#endif }else {if (nice ((priority -50 ) - (nice (0 ) +20 )) <0 && errno !=0 ) --
2.17.1
------------------------------
Subject: Digest Footer
_______________________________________________
ltp mailing list
[email protected]
https://lists.linux.it/listinfo/ltp
------------------------------
End of ltp Digest, Vol 64, Issue 4
**********************************