Skip to contentSkip to conversation

for using class group classifier network controller

HELP Chei-Yol Kim 1 participant 1 message Jun 17, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

First, I thank you very much for your kind reply.

Quoted 63 lines

Which is your problem?

a) network packet can't be classified into the class which is set to net_cls.classid

b) network packet can be classified into the class which is set to net_cls.classid, but its bandwidth limit doesn't work correctly.

If your problem is b), unfortunately I can't help you. Because I am a begginer of cls_cgroup, and I haven't tested enough. (But I think I might be facing same problem.)

If your problem is a), you should check 'tc -s filter show'. You can see the result of classifing by cls_cgroup.
I can classified to the class which is set to root's net_cls.classid.

Environment:
kernel: 2.6.30
tc: iproute2-2.6.29-1 with tc/f_cgroup.c patch in latest git.
(I think it's same, probably)

How to use:
1) set to qdisc, class, filter

    # tc qdisc add dev bond0 root handle 1: htb default 30 
    # tc class add dev bond0 parent 1:0 classid 1:10 htb rate 1mbit 
    # tc class add dev bond0 parent 1:0 classid 1:20 htb rate 2mbit 
    # tc class add dev bond0 parent 1:0 classid 1:30 htb rate 3mbit 
    # tc filter add dev bond0 protocol ip parent 1: prio 1 handle 0x1 cgroup 
    # tc -s class show dev bond0 
    class htb 1:10 root prio 0 rate 1000Kbit ceil 1000Kbit burst 1724b cburst 1724b 
     Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)                         <- packet count is 0 
     rate 0bit 0pps backlog 0b 0p requeues 0 
     lended: 0 borrowed: 0 giants: 0 
     tokens: 13476 ctokens: 13476 

class htb 1:20 root prio 0 rate 2000Kbit ceil 2000Kbit burst 1849b cburst 1849b
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 7226 ctokens: 7226

class htb 1:30 root prio 0 rate 3000Kbit ceil 3000Kbit burst 1974b cburst 1974b
Sent 25804 bytes 214 pkt (dropped 0, overlimits 0 requeues 0) rate 3992bit 4pps backlog 0b 0p requeues 0
lended: 214 borrowed: 0 giants: 0
tokens: 4851 ctokens: 4851

2) mount cls_cgroup and set root's net_cls.classid

    # mount -t cgroup -onet_cls none /cgroup/net/ 
    # cd /cgroup/net/ 
    # ls 
    net_cls.classid  notify_on_release  release_agent  tasks 
    # echo 0x10010 > net_cls.classid                 # I want to classify 1:10 
    # cat net_cls.classid 
    65552                                            # 65552 = 65536 + 16 = 0x10010 

3) using network

Quoted 8 lines

4) check the packet which is classified to the class which is set to net_cls.classid.

    # /home/usui/src/iproute2-2.6.29-1/tc/tc -s class show dev bond0 
    class htb 1:10 root prio 0 rate 1000Kbit ceil 1000Kbit burst 1724b cburst 1724b 
     Sent 11238 bytes 95 pkt (dropped 0, overlimits 0 requeues 0)                    <- increase packet count 
     rate 2944bit 3pps backlog 0b 0p requeues 0 
     lended: 95 borrowed: 0 giants: 0 
     tokens: 12601 ctokens: 12601

I've done the same experiment above your configuration varing each rate of classes. I set the rate as 10mbit, 20mbit, 30mbit for easy measuring.

when I set the classid to 0x10010, class 1:10's packet count was increased.
But, according to your configuration, every packet has to flowed to 1:10 class.
Of course I know that the net_cls can't classify all packet because of the getting classid from the current task. Even though we consider it, Many packets are flowed to 1:30 class.
therefore, the rate of the socket showed about 30mbps. This is the 1:30 class's rate.
I think it's because that 1:30 class is the default class.
When I changed the default to 20, the rate was varied to 20mbps, class 1:20's rate.

To measure this rate, I used the iperf and scp command. Two results are the same. How about your experiment's result?
Would you check the accurate rate of the network using applications like a iperf?

By the results of my experiments, net_cls couldn't control the network rate of the group. What is your opinion?

Quoted 7 lines

class htb 1:20 root prio 0 rate 2000Kbit ceil 2000Kbit burst 1849b cburst 1849b
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 7226 ctokens: 7226

Quoted 5 lines

class htb 1:30 root prio 0 rate 3000Kbit ceil 3000Kbit burst 1974b cburst 1974b
Sent 46092 bytes 342 pkt (dropped 0, overlimits 0 requeues 0) rate 320bit 0pps backlog 0b 0p requeues 0
lended: 342 borrowed: 0 giants: 0
tokens: 5017 ctokens: 5017

- Chei-yol Kim