Skip to contentSkip to conversation

objtool build improvements

PATCH Applied Ian Rogers 6 participants 17 messages Jan 26, 2023 – Apr 20, 2024

Subsystems (4)
lore
Share & tools
lore

Ian Rogers

author
#0 lore raw

v4 cover objtool build improvements

Install libsubcmd and then get headers from there, this avoids inadvertent dependencies on things in tools/lib. Fix V=1 support. Clean up how HOSTCC is used to override CC to avoid CFLAGS being set for say gcc, and then CC being overridden to clang.

v4. Rebase and look to address review comments from Josh Poimboeuf
<[email protected]>. Removes the reviewed-by/tested-by given
the scope of changes.
v3. Is a rebase that removes the merged "tools lib subcmd: Add install
target" patch. In:
https://lore.kernel.org/lkml/CAKwvOd=kgXmpfbVa1wiEvwL0tX3gu+dDTGi-HEiRXSojwCLRrg@mail.gmail.com/
Nick rightly points out that:
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
became:
WARNINGS := -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
losing the EXTRA_WARNINGS which v3 now adds back in. Previous
testing had added the warnings to the end rather than the
beginning, thereby causing unexpected build issues that aren't present in v3.
v2. Include required "tools lib subcmd: Add install target" that is
already in Arnaldo's tree:
https://lore.kernel.org/lkml/[email protected]/
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/commit/?h=perf/core&id=630ae80ea1dd253609cb50cff87f3248f901aca3
When building libsubcmd.a from objtool's Makefile, clear the
subdir to avoid it being appended onto OUTPUT and breaking the
build.

Ian Rogers (3):
objtool: Install libsubcmd in build
objtool: Properly support make V=1
objtool: Alter how HOSTCC is forced

 tools/objtool/.gitignore |  1 +
 tools/objtool/Build      |  2 --
 tools/objtool/Makefile   | 62 ++++++++++++++++++++++++++++------------
 3 files changed, 44 insertions(+), 21 deletions(-)
Signature · 1 line
2.39.1.456.gfc5497dd1b-goog
author
#1 lore raw

PATCH v4 1/3 objtool: Install libsubcmd in build

Including from tools/lib can create inadvertent dependencies. Install libsubcmd in the objtool build and then include the headers from there.

---
 tools/objtool/.gitignore |  1 +
 tools/objtool/Build      |  2 --
 tools/objtool/Makefile   | 31 +++++++++++++++++++++++--------
 3 files changed, 24 insertions(+), 10 deletions(-)
tools/objtool/.gitignore +1 -0
index 14236db3677f..4faa4dd72f35 100644
@@ -2,3 +2,4 @@
 arch/x86/lib/inat-tables.c
 /objtool
 fixdep
+libsubcmd/
tools/objtool/Build +0 -2
index 33f2ee5a46d3..a3cdf8af6635 100644
@@ -16,8 +16,6 @@ objtool-y += libctype.o
 objtool-y += str_error_r.o
 objtool-y += librbtree.o
 
-CFLAGS += -I$(srctree)/tools/lib
-
 $(OUTPUT)libstring.o: ../lib/string.c FORCE
 	$(call rule_mkdir)
 	$(call if_changed_dep,cc_o_c)
tools/objtool/Makefile +23 -8
index a3a9cc24e0e3..0bfdb9da8729 100644
@@ -12,9 +12,13 @@ srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
 endif
 
-SUBCMD_SRCDIR		= $(srctree)/tools/lib/subcmd/
-LIBSUBCMD_OUTPUT	= $(or $(OUTPUT),$(CURDIR)/)
-LIBSUBCMD		= $(LIBSUBCMD_OUTPUT)libsubcmd.a
+LIBSUBCMD_DIR = $(srctree)/tools/lib/subcmd/
+ifneq ($(OUTPUT),)
+  LIBSUBCMD_OUTPUT = $(abspath $(OUTPUT))/libsubcmd
+else
+  LIBSUBCMD_OUTPUT = $(CURDIR)/libsubcmd
+endif
+LIBSUBCMD = $(LIBSUBCMD_OUTPUT)/libsubcmd.a
 
 OBJTOOL    := $(OUTPUT)objtool
 OBJTOOL_IN := $(OBJTOOL)-in.o
@@ -28,7 +32,8 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
 	    -I$(srctree)/tools/arch/$(SRCARCH)/include	\
 	    -I$(srctree)/tools/objtool/include \
-	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include
+	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
+	    -I$(LIBSUBCMD_OUTPUT)/include
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
 CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
 LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
@@ -38,6 +43,7 @@ elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E -
 CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
 AWK = awk
+MKDIR = mkdir
 
 BUILD_ORC := n
 
@@ -57,13 +63,22 @@ $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
 	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
 
 
-$(LIBSUBCMD): fixdep FORCE
-	$(Q)$(MAKE) -C $(SUBCMD_SRCDIR) OUTPUT=$(LIBSUBCMD_OUTPUT)
+$(LIBSUBCMD_OUTPUT):
+	@$(MKDIR) -p $@
+
+$(LIBSUBCMD): fixdep FORCE $(LIBSUBCMD_OUTPUT)
+	@$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
+		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$@ install_headers
+
+$(LIBSUBCMD)-clean:
+	$(call QUIET_CLEAN, libsubcmd)
+	$(Q)$(RM) -r -- $(LIBSUBCMD_OUTPUT)
 
-clean:
+clean: $(LIBSUBCMD)-clean
 	$(call QUIET_CLEAN, objtool) $(RM) $(OBJTOOL)
 	$(Q)find $(OUTPUT) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
-	$(Q)$(RM) $(OUTPUT)arch/x86/lib/inat-tables.c $(OUTPUT)fixdep $(LIBSUBCMD)
+	$(Q)$(RM) $(OUTPUT)arch/x86/lib/inat-tables.c $(OUTPUT)fixdep
 
 FORCE:
 
Signature · 1 line
2.39.1.456.gfc5497dd1b-goog
merge bot Applied
#2 lore raw

[tip: objtool/core] objtool: Install libsubcmd in build

The following commit has been merged into the objtool/core branch of tip:

The following commit has been merged into the objtool/core branch of tip:

Commit-ID:     bdb8bf7d56afd1d22c12c61455d732d3baff2bde
Gitweb:        https://git.kernel.org/tip/bdb8bf7d56afd1d22c12c61455d732d3baff2bde
Author:        Ian Rogers <[email protected]>
AuthorDate:    Thu, 26 Jan 2023 11:06:04 -08:00
Committer:     Josh Poimboeuf <[email protected]>
CommitterDate: Mon, 30 Jan 2023 16:27:46 -08:00

objtool: Install libsubcmd in build

Including from tools/lib can create inadvertent dependencies. Install libsubcmd in the objtool build and then include the headers from there.

---
 tools/objtool/.gitignore |  1 +
 tools/objtool/Build      |  2 --
 tools/objtool/Makefile   | 31 +++++++++++++++++++++++--------
 3 files changed, 24 insertions(+), 10 deletions(-)
tools/objtool/.gitignore +1 -0
index 14236db..4faa4dd 100644
@@ -2,3 +2,4 @@
 arch/x86/lib/inat-tables.c
 /objtool
 fixdep
+libsubcmd/
tools/objtool/Build +0 -2
index 33f2ee5..a3cdf8a 100644
@@ -16,8 +16,6 @@ objtool-y += libctype.o
 objtool-y += str_error_r.o
 objtool-y += librbtree.o
 
-CFLAGS += -I$(srctree)/tools/lib
-
 $(OUTPUT)libstring.o: ../lib/string.c FORCE
 	$(call rule_mkdir)
 	$(call if_changed_dep,cc_o_c)
tools/objtool/Makefile +23 -8
index a3a9cc2..3505ae4 100644
@@ -12,9 +12,13 @@ srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
 endif
 
-SUBCMD_SRCDIR		= $(srctree)/tools/lib/subcmd/
-LIBSUBCMD_OUTPUT	= $(or $(OUTPUT),$(CURDIR)/)
-LIBSUBCMD		= $(LIBSUBCMD_OUTPUT)libsubcmd.a
+LIBSUBCMD_DIR = $(srctree)/tools/lib/subcmd/
+ifneq ($(OUTPUT),)
+  LIBSUBCMD_OUTPUT = $(abspath $(OUTPUT))/libsubcmd
+else
+  LIBSUBCMD_OUTPUT = $(CURDIR)/libsubcmd
+endif
+LIBSUBCMD = $(LIBSUBCMD_OUTPUT)/libsubcmd.a
 
 OBJTOOL    := $(OUTPUT)objtool
 OBJTOOL_IN := $(OBJTOOL)-in.o
@@ -28,7 +32,8 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
 	    -I$(srctree)/tools/arch/$(SRCARCH)/include	\
 	    -I$(srctree)/tools/objtool/include \
-	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include
+	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
+	    -I$(LIBSUBCMD_OUTPUT)/include
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
 CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
 LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
@@ -38,6 +43,7 @@ elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E -
 CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
 AWK = awk
+MKDIR = mkdir
 
 BUILD_ORC := n
 
@@ -57,13 +63,22 @@ $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
 	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
 
 
-$(LIBSUBCMD): fixdep FORCE
-	$(Q)$(MAKE) -C $(SUBCMD_SRCDIR) OUTPUT=$(LIBSUBCMD_OUTPUT)
+$(LIBSUBCMD_OUTPUT):
+	@$(MKDIR) -p $@
+
+$(LIBSUBCMD): fixdep $(LIBSUBCMD_OUTPUT) FORCE
+	@$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
+		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$@ install_headers
+
+$(LIBSUBCMD)-clean:
+	$(call QUIET_CLEAN, libsubcmd)
+	$(Q)$(RM) -r -- $(LIBSUBCMD_OUTPUT)
 
-clean:
+clean: $(LIBSUBCMD)-clean
 	$(call QUIET_CLEAN, objtool) $(RM) $(OBJTOOL)
 	$(Q)find $(OUTPUT) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
-	$(Q)$(RM) $(OUTPUT)arch/x86/lib/inat-tables.c $(OUTPUT)fixdep $(LIBSUBCMD)
+	$(Q)$(RM) $(OUTPUT)arch/x86/lib/inat-tables.c $(OUTPUT)fixdep
 
 FORCE:
 
author
#3 lore raw

PATCH v4 2/3 objtool: Properly support make V=1

In reply to Ian Rogers

The Q variable was being used but never correctly set up. Add the setting up and use in place of @.

---
 tools/objtool/Makefile | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
tools/objtool/Makefile +10 -4
index 0bfdb9da8729..f0651eac06e6 100644
@@ -45,6 +45,12 @@ CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 AWK = awk
 MKDIR = mkdir
 
+ifeq ($(V),1)
+  Q =
+else
+  Q = @
+endif
+
 BUILD_ORC := n
 
 ifeq ($(SRCARCH),x86)
@@ -56,18 +62,18 @@ export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
 $(OBJTOOL_IN): fixdep FORCE
-	@$(CONFIG_SHELL) ./sync-check.sh
-	@$(MAKE) $(build)=objtool
+	$(Q)$(CONFIG_SHELL) ./sync-check.sh
+	$(Q)$(MAKE) $(build)=objtool
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
 	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
-	@$(MKDIR) -p $@
+	$(Q)$(MKDIR) -p $@
 
 $(LIBSUBCMD): fixdep FORCE $(LIBSUBCMD_OUTPUT)
-	@$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
+	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
 		$@ install_headers
 
Signature · 1 line
2.39.1.456.gfc5497dd1b-goog
merge bot Applied
#4 lore raw

[tip: objtool/core] objtool: Properly support make V=1

The following commit has been merged into the objtool/core branch of tip:

The following commit has been merged into the objtool/core branch of tip:

Commit-ID:     8c4526ca6a45e7ff915c2b33b54db6b773291fac
Gitweb:        https://git.kernel.org/tip/8c4526ca6a45e7ff915c2b33b54db6b773291fac
Author:        Ian Rogers <[email protected]>
AuthorDate:    Thu, 26 Jan 2023 11:06:05 -08:00
Committer:     Josh Poimboeuf <[email protected]>
CommitterDate: Mon, 30 Jan 2023 16:28:16 -08:00

objtool: Properly support make V=1

The Q variable was being used but never correctly set up. Add the setting up and use in place of @.

---
 tools/objtool/Makefile | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
tools/objtool/Makefile +10 -4
index 3505ae4..d54b669 100644
@@ -45,6 +45,12 @@ CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 AWK = awk
 MKDIR = mkdir
 
+ifeq ($(V),1)
+  Q =
+else
+  Q = @
+endif
+
 BUILD_ORC := n
 
 ifeq ($(SRCARCH),x86)
@@ -56,18 +62,18 @@ export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
 $(OBJTOOL_IN): fixdep FORCE
-	@$(CONFIG_SHELL) ./sync-check.sh
-	@$(MAKE) $(build)=objtool
+	$(Q)$(CONFIG_SHELL) ./sync-check.sh
+	$(Q)$(MAKE) $(build)=objtool
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
 	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
-	@$(MKDIR) -p $@
+	$(Q)$(MKDIR) -p $@
 
 $(LIBSUBCMD): fixdep $(LIBSUBCMD_OUTPUT) FORCE
-	@$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
+	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
 		$@ install_headers
 
author
#5 lore raw

PATCH v4 3/3 objtool: Alter how HOSTCC is forced

In reply to Ian Rogers

HOSTCC is always wanted when building objtool. Setting CC to HOSTCC happens after tools/scripts/Makefile.include is included, meaning flags (like CFLAGS) are set assuming say CC is gcc, but then it can be later set to HOSTCC which may be clang. tools/scripts/Makefile.include is needed for host set up and common macros in objtool's Makefile. Rather than override the CC variable to HOSTCC, just pass CC as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and also to the linkage step.

---
 tools/objtool/Makefile | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)
tools/objtool/Makefile +13 -10
index f0651eac06e6..bbf8ec440430 100644
@@ -2,11 +2,6 @@
 include ../scripts/Makefile.include
 include ../scripts/Makefile.arch
 
-# always use the host compiler
-AR	 = $(HOSTAR)
-CC	 = $(HOSTCC)
-LD	 = $(HOSTLD)
-
 ifeq ($(srctree),)
 srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
@@ -34,13 +29,18 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/objtool/include \
 	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
 	    -I$(LIBSUBCMD_OUTPUT)/include
+# Note, EXTRA_WARNINGS here was determined for CC and not HOSTCC, it
+# is passed here to match a legacy behavior.
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
-CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
-LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
 elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
-CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+
+# Always want host compilation.
+HOST_OVERRIDES := CC="$(HOSTCC)" LD="$(HOSTLD)" AR="$(HOSTAR)"
 
 AWK = awk
 MKDIR = mkdir
@@ -63,10 +63,12 @@ include $(srctree)/tools/build/Makefile.include
 
 $(OBJTOOL_IN): fixdep FORCE
 	$(Q)$(CONFIG_SHELL) ./sync-check.sh
-	$(Q)$(MAKE) $(build)=objtool
+	$(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
+		LDFLAGS="$(OBJTOOL_LDFLAGS)"
+
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
-	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
+	$(QUIET_LINK)$(HOSTCC) $(OBJTOOL_IN) $(OBJTOOL_LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
@@ -75,6 +77,7 @@ $(LIBSUBCMD_OUTPUT):
 $(LIBSUBCMD): fixdep FORCE $(LIBSUBCMD_OUTPUT)
 	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$(HOST_OVERRIDES) EXTRA_CFLAGS="$(OBJTOOL_CFLAGS)" \
 		$@ install_headers
 
 $(LIBSUBCMD)-clean:
Signature · 1 line
2.39.1.456.gfc5497dd1b-goog
merge bot Applied
#6 lore raw

[tip: objtool/core] objtool: Fix HOSTCC flag usage

The following commit has been merged into the objtool/core branch of tip:

The following commit has been merged into the objtool/core branch of tip:

Commit-ID:     93eacc15687a491a9cf829f94b6891bf544084f3
Gitweb:        https://git.kernel.org/tip/93eacc15687a491a9cf829f94b6891bf544084f3
Author:        Ian Rogers <[email protected]>
AuthorDate:    Thu, 26 Jan 2023 11:06:06 -08:00
Committer:     Josh Poimboeuf <[email protected]>
CommitterDate: Mon, 30 Jan 2023 16:28:18 -08:00

objtool: Fix HOSTCC flag usage

HOSTCC is always wanted when building objtool. Setting CC to HOSTCC happens after tools/scripts/Makefile.include is included, meaning flags (like CFLAGS) are set assuming say CC is gcc, but then it can be later set to HOSTCC which may be clang. tools/scripts/Makefile.include is needed for host set up and common macros in objtool's Makefile. Rather than override the CC variable to HOSTCC, just pass CC as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and also to the linkage step.

---
 tools/objtool/Makefile | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
tools/objtool/Makefile +14 -11
index d54b669..29a8cd7 100644
@@ -2,11 +2,6 @@
 include ../scripts/Makefile.include
 include ../scripts/Makefile.arch
 
-# always use the host compiler
-AR	 = $(HOSTAR)
-CC	 = $(HOSTCC)
-LD	 = $(HOSTLD)
-
 ifeq ($(srctree),)
 srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
@@ -34,13 +29,18 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/objtool/include \
 	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
 	    -I$(LIBSUBCMD_OUTPUT)/include
+# Note, EXTRA_WARNINGS here was determined for CC and not HOSTCC, it
+# is passed here to match a legacy behavior.
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
-CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
-LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
 elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
-CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+
+# Always want host compilation.
+HOST_OVERRIDES := CC="$(HOSTCC)" LD="$(HOSTLD)" AR="$(HOSTAR)"
 
 AWK = awk
 MKDIR = mkdir
@@ -61,12 +61,14 @@ export BUILD_ORC
 export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
-$(OBJTOOL_IN): fixdep FORCE
+$(OBJTOOL_IN): fixdep $(LIBSUBCMD) FORCE
 	$(Q)$(CONFIG_SHELL) ./sync-check.sh
-	$(Q)$(MAKE) $(build)=objtool
+	$(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
+		LDFLAGS="$(OBJTOOL_LDFLAGS)"
+
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
-	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
+	$(QUIET_LINK)$(HOSTCC) $(OBJTOOL_IN) $(OBJTOOL_LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
@@ -75,6 +77,7 @@ $(LIBSUBCMD_OUTPUT):
 $(LIBSUBCMD): fixdep $(LIBSUBCMD_OUTPUT) FORCE
 	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$(HOST_OVERRIDES) EXTRA_CFLAGS="$(OBJTOOL_CFLAGS)" \
 		$@ install_headers
 
 $(LIBSUBCMD)-clean:
#7 lore raw

Re: [tip: objtool/core] objtool: Fix HOSTCC flag usage

Hi,

I just spotted this breaks cross-compiling; details below.

Quoted 32 lines · On Wed, Feb 01, 2023 at 04:26:34PM -0000, tip-bot2 for Ian Rogers wrote:

The following commit has been merged into the objtool/core branch of tip:

Commit-ID:     93eacc15687a491a9cf829f94b6891bf544084f3
Gitweb:        https://git.kernel.org/tip/93eacc15687a491a9cf829f94b6891bf544084f3
Author:        Ian Rogers <[email protected]>
AuthorDate:    Thu, 26 Jan 2023 11:06:06 -08:00
Committer:     Josh Poimboeuf <[email protected]>
CommitterDate: Mon, 30 Jan 2023 16:28:18 -08:00

objtool: Fix HOSTCC flag usage

HOSTCC is always wanted when building objtool. Setting CC to HOSTCC happens after tools/scripts/Makefile.include is included, meaning flags (like CFLAGS) are set assuming say CC is gcc, but then it can be later set to HOSTCC which may be clang. tools/scripts/Makefile.include is needed for host set up and common macros in objtool's Makefile. Rather than override the CC variable to HOSTCC, just pass CC as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and also to the linkage step.

---
 tools/objtool/Makefile | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
tools/objtool/Makefile +0 -0
index d54b669..29a8cd7 100644

tools/objtool/Makefile line 8

Quoted 7 lines
tools/objtool/Makefile +0 -4
@@ -2,11 +2,6 @@
 include ../scripts/Makefile.include
 include ../scripts/Makefile.arch
 
-# always use the host compiler
-AR	 = $(HOSTAR)
-CC	 = $(HOSTCC)
-LD	 = $(HOSTLD)

So as of this change, CC is now the cross-compiler CC ....

Quoted 8 lines
tools/objtool/Makefile +0 -1
-
 ifeq ($(srctree),)
 srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
@@ -34,13 +29,18 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/objtool/include \
 	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
 	    -I$(LIBSUBCMD_OUTPUT)/include

tools/objtool/Makefile INCLUDES := -I$(srctree)/tools/include \ · line 39

Quoted 10 lines
tools/objtool/Makefile +4 -2
+# Note, EXTRA_WARNINGS here was determined for CC and not HOSTCC, it
+# is passed here to match a legacy behavior.
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
-CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
-LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
 elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)

... and so as of this patch, this check uses the cross-compiler CC rather than the HOSTCC (and IIUC the wrong CFLAGS too).

So that probably wants to be $(HOSTCC) $(OBJTOOL_CFLAGS) ?

The cross CC might not even have libelf in its header path ...

tools/objtool/Makefile INCLUDES := -I$(srctree)/tools/include \ · line 40

Quoted 2 lines
tools/objtool/Makefile +1 -1
-CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)

... which means that we might end up setting DLIBELF_USE_DEPRECATED when we didn't mean to.

I saw this blowing up in some experiments with an arm64 objtool built on x86_64, and I believe the reverse can also occur (i.e. building for x86_64 on arm64).

As of this patch, I get a splat:

| [mark@lakrids:~/src/linux]% usekorg 12.1.0 make ARCH=arm64 CROSS_COMPILE=aarch64-linux- tools/objtool/elf.o
|   CALL    scripts/checksyscalls.sh
|   DESCEND objtool
| <stdin>:1:10: fatal error: libelf.h: No such file or directory
| compilation terminated.
|   INSTALL libsubcmd_headers
|   CC      /home/mark/src/linux/tools/objtool/elf.o
| elf.c: In function ‘read_sections’:
| elf.c:273:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
|   273 |  if (elf_getshdrnum(elf->elf, &sections_nr)) {
|       |  ^~
| In file included from /usr/include/gelf.h:32,
|                  from /home/mark/src/linux/tools/objtool/include/objtool/elf.h:10,
|                  from elf.c:22:
| /usr/include/libelf.h:310:12: note: declared here
|   310 | extern int elf_getshnum (Elf *__elf, size_t *__dst)
|       |            ^~~~~~~~~~~~
| elf.c:278:2: error: ‘elf_getshstrndx’ is deprecated [-Werror=deprecated-declarations]
|   278 |  if (elf_getshdrstrndx(elf->elf, &shstrndx)) {
|       |  ^~
| In file included from /usr/include/gelf.h:32,
|                  from /home/mark/src/linux/tools/objtool/include/objtool/elf.h:10,
|                  from elf.c:22:
| /usr/include/libelf.h:322:12: note: declared here
|   322 | extern int elf_getshstrndx (Elf *__elf, size_t *__dst)
|       |            ^~~~~~~~~~~~~~~
| cc1: all warnings being treated as errors
| make[3]: *** [/home/mark/src/linux/tools/build/Makefile.build:97: /home/mark/src/linux/tools/objtool/elf.o] Error 1
| make[2]: *** [Makefile:66: /home/mark/src/linux/tools/objtool/objtool-in.o] Error 2
| make[1]: *** [Makefile:73: objtool] Error 2
| make: *** [Makefile:1439: tools/objtool] Error 2

Thanks,
Mark.

Quoted 32 lines
tools/objtool/Makefile +9 -3
+
+# Always want host compilation.
+HOST_OVERRIDES := CC="$(HOSTCC)" LD="$(HOSTLD)" AR="$(HOSTAR)"
 
 AWK = awk
 MKDIR = mkdir
@@ -61,12 +61,14 @@ export BUILD_ORC
 export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
-$(OBJTOOL_IN): fixdep FORCE
+$(OBJTOOL_IN): fixdep $(LIBSUBCMD) FORCE
 	$(Q)$(CONFIG_SHELL) ./sync-check.sh
-	$(Q)$(MAKE) $(build)=objtool
+	$(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
+		LDFLAGS="$(OBJTOOL_LDFLAGS)"
+
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
-	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
+	$(QUIET_LINK)$(HOSTCC) $(OBJTOOL_IN) $(OBJTOOL_LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
@@ -75,6 +77,7 @@ $(LIBSUBCMD_OUTPUT):
 $(LIBSUBCMD): fixdep $(LIBSUBCMD_OUTPUT) FORCE
 	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$(HOST_OVERRIDES) EXTRA_CFLAGS="$(OBJTOOL_CFLAGS)" \
 		$@ install_headers
 
 $(LIBSUBCMD)-clean:
maintainer
#8 lore raw

Re: [tip: objtool/core] objtool: Fix HOSTCC flag usage

Quoted 3 lines · Mark Rutland

Hi,

I just spotted this breaks cross-compiling; details below.

Thanks, we'll fix it up with

tools/objtool/Makefile +1 -1
index 29a8cd7449bf..83b100c1e7f6 100644
@@ -36,7 +36,7 @@ OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE
 OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
-elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
+elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(HOSTCC) $(OBJTOOL_CFLAGS) -x c -E - | grep elf_getshdr)
 OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
 # Always want host compilation.
#9 lore raw

Re: [tip: objtool/core] objtool: Fix HOSTCC flag usage

Quoted 12 lines · Josh Poimboeuf
Quoted 3 lines · Mark Rutland

Hi,

I just spotted this breaks cross-compiling; details below.

Thanks, we'll fix it up with

tools/objtool/Makefile +0 -0
index 29a8cd7449bf..83b100c1e7f6 100644

tools/objtool/Makefile OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE · line 42

Quoted 8 lines
tools/objtool/Makefile +1 -1
@@ -36,7 +36,7 @@ OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE
 OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
-elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
+elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(HOSTCC) $(OBJTOOL_CFLAGS) -x c -E - | grep elf_getshdr)
 OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
 # Always want host compilation.

Profiting off of the occasion to point out that cross-compiling with CONFIG_DEBUG_INFO_BTF=y is also broken (it builds the resolve_btfids tool):

I source this script when cross-compiling, which has worked up until now:

#!/bin/bash

export TOPDIR=$(cd "$(dirname "${BASH_SOURCE[0]}" )" && pwd) export PATH="${TOPDIR}/bin:$PATH"
export ARCH="arm64"
export CROSS_COMPILE="aarch64-none-linux-gnu-"
export SYSROOT="${TOPDIR}/sysroot"
export CC="aarch64-none-linux-gnu-gcc"
export CXX="aarch64-none-linux-gnu-g++"
export LDFLAGS="-L${SYSROOT}/usr/lib -L${SYSROOT}/usr/local/lib" export CFLAGS="-I${SYSROOT}/usr/include -I${SYSROOT}/usr/local/include" export CFLAGS="${CFLAGS} -Wno-format-nonliteral"
export KBUILD_OUTPUT="output-arm64"

Before reverting this patch, the build fails like this:

$ make -j 8 Image.gz dtbs modules W=1 C=1
make[1]: Entering directory '/opt/net-next/output-arm64'
  SYNC    include/config/auto.conf.cmd
  GEN     Makefile
  GEN     Makefile
  DESCEND bpf/resolve_btfids
  CC      scripts/mod/empty.o
  CC      scripts/mod/devicetable-offsets.s
  CHECK   ../scripts/mod/empty.c
  INSTALL libsubcmd_headers
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/modpost.o
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/sumversion.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/main.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/rbtree.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/string.o
In file included from /opt/net-next/tools/include/linux/rbtree_augmented.h:19,
                 from ../../lib/rbtree.c:12:
/opt/net-next/tools/include/linux/rbtree.h: In function ‘rb_link_node’:
/opt/net-next/tools/include/linux/rbtree.h:70:42: error: ‘NULL’ undeclared (first use in this function)
   70 |         node->rb_left = node->rb_right = NULL;
      |                                          ^~~~
/opt/net-next/tools/include/linux/rbtree.h:21:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
   20 | #include <linux/kernel.h>
  +++ |+#include <stddef.h>
   21 | #include <linux/stddef.h>
/opt/net-next/tools/include/linux/rbtree.h:70:42: note: each undeclared identifier is reported only once for each function it appears in
   70 |         node->rb_left = node->rb_right = NULL;
      |                                          ^~~~
/opt/net-next/tools/include/linux/rbtree.h: At top level:
/opt/net-next/tools/include/linux/rbtree.h:131:43: error: unknown type name ‘bool’
  131 |                                           bool leftmost)
      |                                           ^~~~
/opt/net-next/tools/include/linux/rbtree.h:21:1: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
   20 | #include <linux/kernel.h>
  +++ |+#include <stdbool.h>
   21 | #include <linux/stddef.h>
/opt/net-next/tools/include/linux/rbtree.h:179:15: error: unknown type name ‘bool’
  179 |               bool (*less)(struct rb_node *, const struct rb_node *))
      |               ^~~~
/opt/net-next/tools/include/linux/rbtree.h:179:15: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
/opt/net-next/tools/include/linux/rbtree.h:207:8: error: unknown type name ‘bool’
  207 |        bool (*less)(struct rb_node *, const struct rb_node *))
      |        ^~~~
/opt/net-next/tools/include/linux/rbtree.h:207:8: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
/opt/net-next/tools/include/linux/rbtree.h: In function ‘rb_find_add’:
/opt/net-next/tools/include/linux/rbtree.h:238:34: error: ‘NULL’ undeclared (first use in this function)
  238 |         struct rb_node *parent = NULL;
      |                                  ^~~~
/opt/net-next/tools/include/linux/rbtree.h:238:34: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
/opt/net-next/tools/include/linux/rbtree.h: In function ‘rb_find’:
/opt/net-next/tools/include/linux/rbtree.h:283:16: error: ‘NULL’ undeclared (first use in this function)
  283 |         return NULL;
      |                ^~~~
/opt/net-next/tools/include/linux/rbtree.h:283:16: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
/opt/net-next/tools/include/linux/rbtree.h: In function ‘rb_find_first’:
/opt/net-next/tools/include/linux/rbtree.h:299:33: error: ‘NULL’ undeclared (first use in this function)
  299 |         struct rb_node *match = NULL;
      |                                 ^~~~
/opt/net-next/tools/include/linux/rbtree.h:299:33: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
/opt/net-next/tools/include/linux/rbtree.h: In function ‘rb_next_match’:
/opt/net-next/tools/include/linux/rbtree.h:330:24: error: ‘NULL’ undeclared (first use in this function)
  330 |                 node = NULL;
      |                        ^~~~
/opt/net-next/tools/include/linux/rbtree.h:330:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
In file included from ../../lib/rbtree.c:12:
/opt/net-next/tools/include/linux/rbtree_augmented.h: At top level:
/opt/net-next/tools/include/linux/rbtree_augmented.h:57:57: error: unknown type name ‘bool’
   57 |                            struct rb_root_cached *root, bool newleft,
      |                                                         ^~~~
/opt/net-next/tools/include/linux/rbtree_augmented.h:20:1: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
   19 | #include <linux/rbtree.h>
  +++ |+#include <stdbool.h>
   20 |
/opt/net-next/tools/include/linux/rbtree_augmented.h: In function ‘__rb_erase_augmented’:
/opt/net-next/tools/include/linux/rbtree_augmented.h:208:37: error: ‘NULL’ undeclared (first use in this function)
  208 |                         rebalance = NULL;
      |                                     ^~~~
/opt/net-next/tools/include/linux/rbtree_augmented.h:20:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
   19 | #include <linux/rbtree.h>
  +++ |+#include <stddef.h>
   20 |
../../lib/rbtree.c: In function ‘__rb_insert’:
../../lib/rbtree.c:90:16: error: ‘true’ undeclared (first use in this function)
   90 |         while (true) {
      |                ^~~~
../../lib/rbtree.c:14:1: note: ‘true’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
   13 | #include <linux/export.h>
  +++ |+#include <stdbool.h>
   14 |
../../lib/rbtree.c:100:51: error: ‘NULL’ undeclared (first use in this function)
  100 |                         rb_set_parent_color(node, NULL, RB_BLACK);
      |                                                   ^~~~
../../lib/rbtree.c:14:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
   13 | #include <linux/export.h>
  +++ |+#include <stddef.h>
   14 |
../../lib/rbtree.c: In function ‘____rb_erase_color’:
../../lib/rbtree.c:230:32: error: ‘NULL’ undeclared (first use in this function)
  230 |         struct rb_node *node = NULL, *sibling, *tmp1, *tmp2;
      |                                ^~~~
../../lib/rbtree.c:230:32: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c:232:16: error: ‘true’ undeclared (first use in this function)
  232 |         while (true) {
      |                ^~~~
../../lib/rbtree.c:232:16: note: ‘true’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
../../lib/rbtree.c: In function ‘rb_first’:
../../lib/rbtree.c:468:24: error: ‘NULL’ undeclared (first use in this function)
  468 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:468:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c: In function ‘rb_last’:
../../lib/rbtree.c:480:24: error: ‘NULL’ undeclared (first use in this function)
  480 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:480:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c: In function ‘rb_next’:
../../lib/rbtree.c:491:24: error: ‘NULL’ undeclared (first use in this function)
  491 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:491:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c: In function ‘rb_prev’:
../../lib/rbtree.c:522:24: error: ‘NULL’ undeclared (first use in this function)
  522 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:522:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c: In function ‘rb_next_postorder’:
../../lib/rbtree.c:577:24: error: ‘NULL’ undeclared (first use in this function)
  577 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:577:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/rbtree.c: In function ‘rb_first_postorder’:
../../lib/rbtree.c:594:24: error: ‘NULL’ undeclared (first use in this function)
  594 |                 return NULL;
      |                        ^~~~
../../lib/rbtree.c:594:24: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
../../lib/string.c:48:30: error: unknown type name ‘bool’
   48 | int strtobool(const char *s, bool *res)
      |                              ^~~~
../../lib/string.c:21:1: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
   20 | #include <linux/ctype.h>
  +++ |+#include <stdbool.h>
   21 | #include <linux/compiler.h>
../../lib/string.c:172:33: error: unknown type name ‘u8’
  172 | static void *check_bytes8(const u8 *start, u8 value, unsigned int bytes)
      |                                 ^~
../../lib/string.c:172:44: error: unknown type name ‘u8’
  172 | static void *check_bytes8(const u8 *start, u8 value, unsigned int bytes)
      |                                            ^~
../../lib/string.c: In function ‘memchr_inv’:
../../lib/string.c:194:9: error: unknown type name ‘u8’
  194 |         u8 value = c;
      |         ^~
../../lib/string.c:195:9: error: unknown type name ‘u64’
  195 |         u64 value64;
      |         ^~~
../../lib/string.c:199:24: warning: implicit declaration of function ‘check_bytes8’ [-Wimplicit-function-declaration]
  199 |                 return check_bytes8(start, value, bytes);
      |                        ^~~~~~~~~~~~
../../lib/string.c:199:24: warning: returning ‘int’ from a function with return type ‘void *’ makes pointer from integer without a cast [-Wint-conversion]
  199 |                 return check_bytes8(start, value, bytes);
      |                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../lib/string.c:204:28: warning: left shift count >= width of type [-Wshift-count-overflow]
  204 |         value64 |= value64 << 32;
      |                            ^~
../../lib/string.c:208:17: error: unknown type name ‘u8’
  208 |                 u8 *r;
      |                 ^~
../../lib/string.c:211:19: warning: assignment to ‘int *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
  211 |                 r = check_bytes8(start, value, prefix);
      |                   ^
../../lib/string.c:221:23: error: ‘u64’ undeclared (first use in this function)
  221 |                 if (*(u64 *)start != value64)
      |                       ^~~
../../lib/string.c:221:23: note: each undeclared identifier is reported only once for each function it appears in
../../lib/string.c:221:28: error: expected expression before ‘)’ token
  221 |                 if (*(u64 *)start != value64)
      |                            ^
../../lib/string.c:222:32: warning: returning ‘int’ from a function with return type ‘void *’ makes pointer from integer without a cast [-Wint-conversion]
  222 |                         return check_bytes8(start, value, 8);
      |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../lib/string.c:227:16: warning: returning ‘int’ from a function with return type ‘void *’ makes pointer from integer without a cast [-Wint-conversion]
  227 |         return check_bytes8(start, value, bytes % 8);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make[4]: *** [Build:9: /opt/net-next/output-arm64/tools/bpf/resolve_btfids/rbtree.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [Build:9: /opt/net-next/output-arm64/tools/bpf/resolve_btfids/string.o] Error 1
In file included from main.c:73:
/opt/net-next/tools/include/linux/rbtree.h:131:43: error: unknown type name ‘bool’
  131 |                                           bool leftmost)
      |                                           ^~~~
/opt/net-next/tools/include/linux/rbtree.h:21:1: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
   20 | #include <linux/kernel.h>
  +++ |+#include <stdbool.h>
   21 | #include <linux/stddef.h>
/opt/net-next/tools/include/linux/rbtree.h:179:15: error: unknown type name ‘bool’
  179 |               bool (*less)(struct rb_node *, const struct rb_node *))
      |               ^~~~
/opt/net-next/tools/include/linux/rbtree.h:179:15: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
/opt/net-next/tools/include/linux/rbtree.h:207:8: error: unknown type name ‘bool’
  207 |        bool (*less)(struct rb_node *, const struct rb_node *))
      |        ^~~~
/opt/net-next/tools/include/linux/rbtree.h:207:8: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
In file included from main.c:75:
/opt/net-next/tools/include/linux/err.h:35:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘ERR_PTR’
   35 | static inline void * __must_check ERR_PTR(long error_)
      |                                   ^~~~~~~
/opt/net-next/tools/include/linux/err.h:40:33: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PTR_ERR’
   40 | static inline long __must_check PTR_ERR(__force const void *ptr)
      |                                 ^~~~~~~
/opt/net-next/tools/include/linux/err.h:45:15: error: unknown type name ‘bool’
   45 | static inline bool __must_check IS_ERR(__force const void *ptr)
      |               ^~~~
/opt/net-next/tools/include/linux/err.h:45:33: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘IS_ERR’
   45 | static inline bool __must_check IS_ERR(__force const void *ptr)
      |                                 ^~~~~~
/opt/net-next/tools/include/linux/err.h:50:15: error: unknown type name ‘bool’
   50 | static inline bool __must_check IS_ERR_OR_NULL(__force const void *ptr)
      |               ^~~~
/opt/net-next/tools/include/linux/err.h:50:33: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘IS_ERR_OR_NULL’
   50 | static inline bool __must_check IS_ERR_OR_NULL(__force const void *ptr)
      |                                 ^~~~~~~~~~~~~~
/opt/net-next/tools/include/linux/err.h:55:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PTR_ERR_OR_ZERO’
   55 | static inline int __must_check PTR_ERR_OR_ZERO(__force const void *ptr)
      |                                ^~~~~~~~~~~~~~~
/opt/net-next/tools/include/linux/err.h:70:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘ERR_CAST’
   70 | static inline void * __must_check ERR_CAST(__force const void *ptr)
      |                                   ^~~~~~~~
In file included from main.c:76:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h:208:35: warning: ‘enum btf_func_linkage’ declared inside parameter list will not be visible outside of this definition
 or declaration
  208 |                              enum btf_func_linkage linkage, int proto_type_id);
      |                                   ^~~~~~~~~~~~~~~~
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h: In function ‘btf_kflag’:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h:332:16: warning: implicit declaration of function ‘BTF_INFO_KFLAG’; did you mean ‘BTF_INFO_KIND’? [-Wimplicit-function
-declaration]
  332 |         return BTF_INFO_KFLAG(t->info);
      |                ^~~~~~~~~~~~~~
      |                BTF_INFO_KIND
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h: In function ‘btf_member_bit_offset’:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h:534:24: warning: implicit declaration of function ‘BTF_MEMBER_BIT_OFFSET’ [-Wimplicit-function-declaration]
  534 |         return kflag ? BTF_MEMBER_BIT_OFFSET(m->offset) : m->offset;
      |                        ^~~~~~~~~~~~~~~~~~~~~
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h: In function ‘btf_member_bitfield_size’:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/btf.h:546:24: warning: implicit declaration of function ‘BTF_MEMBER_BITFIELD_SIZE’ [-Wimplicit-function-declaration]
  546 |         return kflag ? BTF_MEMBER_BITFIELD_SIZE(m->offset) : 0;
      |                        ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from main.c:77:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/libbpf.h: At top level:
/opt/gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu/sysroot/usr/include/bpf/libbpf.h:70:54: warning: ‘enum bpf_link_type’ declared inside parameter list will not be visible outside of this definition
or declaration
   70 | LIBBPF_API const char *libbpf_bpf_link_type_str(enum bpf_link_type t);
      |                                                      ^~~~~~~~~~~~~
In file included from main.c:73:
main.c: In function ‘btf_id__find’:
/opt/net-next/tools/include/linux/rbtree.h:37:37: warning: implicit declaration of function ‘container_of’ [-Wimplicit-function-declaration]
   37 | #define rb_entry(ptr, type, member) container_of(ptr, type, member)
      |                                     ^~~~~~~~~~~~
main.c:174:22: note: in expansion of macro ‘rb_entry’
  174 |                 id = rb_entry(p, struct btf_id, rb_node);
      |                      ^~~~~~~~
main.c:174:34: error: expected expression before ‘struct’
  174 |                 id = rb_entry(p, struct btf_id, rb_node);
      |                                  ^~~~~~
/opt/net-next/tools/include/linux/rbtree.h:37:55: note: in definition of macro ‘rb_entry’
   37 | #define rb_entry(ptr, type, member) container_of(ptr, type, member)
      |                                                       ^~~~
main.c: In function ‘btf_id__add’:
main.c:196:39: error: expected expression before ‘struct’
  196 |                 id = rb_entry(parent, struct btf_id, rb_node);
      |                                       ^~~~~~
/opt/net-next/tools/include/linux/rbtree.h:37:55: note: in definition of macro ‘rb_entry’
   37 | #define rb_entry(ptr, type, member) container_of(ptr, type, member)
      |                                                       ^~~~
main.c: In function ‘__symbols_patch’:
main.c:632:37: error: expected expression before ‘struct’
  632 |                 id = rb_entry(next, struct btf_id, rb_node);
      |                                     ^~~~~~
/opt/net-next/tools/include/linux/rbtree.h:37:55: note: in definition of macro ‘rb_entry’
   37 | #define rb_entry(ptr, type, member) container_of(ptr, type, member)
      |                                                       ^~~~
main.c: In function ‘sets_patch’:
main.c:662:39: error: expected expression before ‘struct’
  662 |                 id   = rb_entry(next, struct btf_id, rb_node);
      |                                       ^~~~~~
/opt/net-next/tools/include/linux/rbtree.h:37:55: note: in definition of macro ‘rb_entry’
   37 | #define rb_entry(ptr, type, member) container_of(ptr, type, member)
      |                                                       ^~~~
In file included from main.c:78:
main.c: In function ‘main’:
/opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/include/subcmd/parse-options.h:118:32: warning: implicit declaration of function ‘BUILD_BUG_ON_ZERO’ [-Wimplicit-function-declaration]
  118 | #define check_vtype(v, type) ( BUILD_BUG_ON_ZERO(!__builtin_types_compatible_p(typeof(v), type)) + v )
      |                                ^~~~~~~~~~~~~~~~~
/opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/include/subcmd/parse-options.h:131:106: note: in expansion of macro ‘check_vtype’
  131 | #define OPT_INCR(s, l, v, h)        { .type = OPTION_INCR, .short_name = (s), .long_name = (l), .value = check_vtype(v, int *), .help = (h) }
      |                                                                                                          ^~~~~~~~~~~
main.c:736:17: note: in expansion of macro ‘OPT_INCR’
  736 |                 OPT_INCR('v', "verbose", &verbose,
      |                 ^~~~~~~~
make[4]: *** [/opt/net-next/tools/build/Makefile.build:97: /opt/net-next/output-arm64/tools/bpf/resolve_btfids/main.o] Error 1
make[3]: *** [Makefile:80: /opt/net-next/output-arm64/tools/bpf/resolve_btfids//resolve_btfids-in.o] Error 2
make[2]: *** [Makefile:76: bpf/resolve_btfids] Error 2
make[1]: *** [/opt/net-next/Makefile:1451: tools/bpf/resolve_btfids] Error 2
make[1]: *** Waiting for unfinished jobs....
  HOSTLD  scripts/mod/modpost
  CC      kernel/bounds.s
  CC      arch/arm64/kernel/asm-offsets.s
  CALL    ../scripts/checksyscalls.sh
make[1]: Leaving directory '/opt/net-next/output-arm64'
make: *** [Makefile:242: __sub-make] Error 2

After reverting:

make -j 8 Image.gz dtbs modules W=1 C=1 make[1]: Entering directory '/opt/net-next/output-arm64'
GEN Makefile
DESCEND bpf/resolve_btfids
CALL ../scripts/checksyscalls.sh
INSTALL libsubcmd_headers

  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/exec-cmd.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/help.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/pager.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/parse-options.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/run-command.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/sigchain.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/subcmd-config.o
  LDS     arch/arm64/kernel/vdso/vdso.lds
  CC      arch/arm64/kernel/vdso/vgettimeofday.o
  AS      arch/arm64/kernel/vdso/note.o
  AS      arch/arm64/kernel/vdso/sigreturn.o
  CHECK   ../arch/arm64/kernel/vdso/vgettimeofday.c

../arch/arm64/kernel/vdso/vgettimeofday.c:9:5: warning: symbol '__kernel_clock_gettime' was not declared. Should it be static? ../arch/arm64/kernel/vdso/vgettimeofday.c:15:5: warning: symbol '__kernel_gettimeofday' was not declared. Should it be static? ../arch/arm64/kernel/vdso/vgettimeofday.c:21:5: warning: symbol '__kernel_clock_getres' was not declared. Should it be static?
LD arch/arm64/kernel/vdso/vdso.so.dbg
VDSOSYM include/generated/vdso-offsets.h
OBJCOPY arch/arm64/kernel/vdso/vdso.so

  LD      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/libsubcmd-in.o
  AR      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/libsubcmd/libsubcmd.a
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/main.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/rbtree.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/zalloc.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/string.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/ctype.o
  CC      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/str_error_r.o
  LD      /opt/net-next/output-arm64/tools/bpf/resolve_btfids/resolve_btfids-in.o

LINK resolve_btfids
(...)

Sadly idk how to fix it. I put this print in tools/bpf/resolve_btfids/Makefile if it helps:

$(error CC $(CC) HOSTCC $(HOSTCC) HOSTCFLAGS $(HOSTCFLAGS) KBUILD_HOSTCFLAGS $(KBUILD_HOSTLDFLAGS))

which outputs:

Makefile:24: *** CC aarch64-none-linux-gnu-gcc HOSTCC gcc HOSTCFLAGS KBUILD_HOSTCFLAGS . Stop.

maintainer
#10 lore raw

Re: [tip: objtool/core] objtool: Fix HOSTCC flag usage

Quoted 20 lines · Vladimir Oltean
Quoted 19 lines · Josh Poimboeuf
Quoted 3 lines · Mark Rutland

Hi,

I just spotted this breaks cross-compiling; details below.

Thanks, we'll fix it up with

tools/objtool/Makefile +1 -1
index 29a8cd7449bf..83b100c1e7f6 100644
@@ -36,7 +36,7 @@ OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE
 OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
-elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
+elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(HOSTCC) $(OBJTOOL_CFLAGS) -x c -E - | grep elf_getshdr)
 OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
Quoted 5 lines

tools/objtool/Makefile OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE · line 42

Quoted 1 line
tools/objtool/Makefile +0 -0
 # Always want host compilation.

Profiting off of the occasion to point out that cross-compiling with CONFIG_DEBUG_INFO_BTF=y is also broken (it builds the resolve_btfids tool):

The above patch was for objtool, though I'm guessing you were bitten by a similar patch for bpf:

13e07691a16f ("tools/resolve_btfids: Alter how HOSTCC is forced")

It looks like it might have a similar problem we had for objtool. Does this fix it?

tools/bpf/resolve_btfids/Makefile +13 -11
index daed388aa5d7..fff84cd914cd 100644
@@ -18,8 +18,8 @@ else
 endif
 
 # always use the host compiler
-HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)" \
-		  EXTRA_CFLAGS="$(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)"
+HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)"
+BTF_CFLAGS     := $(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)
 
 RM      ?= rm
 CROSS_COMPILE =
@@ -53,23 +53,25 @@ $(OUTPUT) $(OUTPUT)/libsubcmd $(LIBBPF_OUT):
 
 $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/libsubcmd
 	$(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(SUBCMD_OUT) \
-		    DESTDIR=$(SUBCMD_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
+		    $(HOST_OVERRIDES) EXTRA_CFLAGS="$(BTF_CFLAGS)" \
+		    DESTDIR=$(LIBBPF_DESTDIR) prefix= subdir= \
 		    $(abspath $@) install_headers
 
 $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(LIBBPF_OUT)
 	$(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC) OUTPUT=$(LIBBPF_OUT)    \
-		    DESTDIR=$(LIBBPF_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
+		    $(HOST_OVERRIDES) EXTRA_CFLAGS="$(BTF_CFLAGS)" \
+		    DESTDIR=$(LIBBPF_DESTDIR) prefix= subdir= \
 		    $(abspath $@) install_headers
 
 LIBELF_FLAGS := $(shell $(HOSTPKG_CONFIG) libelf --cflags 2>/dev/null)
 LIBELF_LIBS  := $(shell $(HOSTPKG_CONFIG) libelf --libs 2>/dev/null || echo -lelf)
 
-CFLAGS += -g \
-          -I$(srctree)/tools/include \
-          -I$(srctree)/tools/include/uapi \
-          -I$(LIBBPF_INCLUDE) \
-          -I$(SUBCMD_INCLUDE) \
-          $(LIBELF_FLAGS)
+BTF_CFLAGS += -g \
+              -I$(srctree)/tools/include \
+              -I$(srctree)/tools/include/uapi \
+              -I$(LIBBPF_INCLUDE) \
+              -I$(SUBCMD_INCLUDE) \
+              $(LIBELF_FLAGS)
 
 LIBS = $(LIBELF_LIBS) -lz
 
@@ -77,7 +79,7 @@ export srctree OUTPUT CFLAGS Q
 include $(srctree)/tools/build/Makefile.include
 
 $(BINARY_IN): fixdep FORCE prepare | $(OUTPUT)
-	$(Q)$(MAKE) $(build)=resolve_btfids $(HOST_OVERRIDES)
+	$(Q)$(MAKE) $(build)=resolve_btfids $(HOST_OVERRIDES) CFLAGS="$(BTF_CFLAGS)"
 
 $(BINARY): $(BPFOBJ) $(SUBCMDOBJ) $(BINARY_IN)
 	$(call msg,LINK,$@)
author
#11 lore raw

Re: [tip: objtool/core] objtool: Fix HOSTCC flag usage

Quoted 28 lines · Josh Poimboeuf
Quoted 20 lines · Vladimir Oltean
Quoted 19 lines · Josh Poimboeuf
Quoted 3 lines · Mark Rutland

Hi,

I just spotted this breaks cross-compiling; details below.

Thanks, we'll fix it up with

tools/objtool/Makefile +1 -1
index 29a8cd7449bf..83b100c1e7f6 100644
@@ -36,7 +36,7 @@ OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE
 OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
-elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
+elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(HOSTCC) $(OBJTOOL_CFLAGS) -x c -E - | grep elf_getshdr)
 OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
 
Quoted 5 lines

tools/objtool/Makefile OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBE · line 42

Quoted 1 line
tools/objtool/Makefile +0 -0
 # Always want host compilation.

Profiting off of the occasion to point out that cross-compiling with CONFIG_DEBUG_INFO_BTF=y is also broken (it builds the resolve_btfids tool):

Quoted 7 lines

The above patch was for objtool, though I'm guessing you were bitten by a similar patch for bpf:

13e07691a16f ("tools/resolve_btfids: Alter how HOSTCC is forced")

It looks like it might have a similar problem we had for objtool. Does this fix it?

Jiri Olsa has been exploring switching to using hostprogs (we need a hostlibs notion), his patch is:
https://lore.kernel.org/bpf/[email protected]/
With this thread giving context:
https://lore.kernel.org/lkml/[email protected]/
If we have hostprogs and hostlibs then objtool should move to this approach as changing CC leads to broken CFLAGS and the like.

Thanks,
Ian

Quoted 58 lines
tools/bpf/resolve_btfids/Makefile +13 -11
index daed388aa5d7..fff84cd914cd 100644
@@ -18,8 +18,8 @@ else
 endif
 
 # always use the host compiler
-HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)" \
-                 EXTRA_CFLAGS="$(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)"
+HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)"
+BTF_CFLAGS     := $(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)
 
 RM      ?= rm
 CROSS_COMPILE =
@@ -53,23 +53,25 @@ $(OUTPUT) $(OUTPUT)/libsubcmd $(LIBBPF_OUT):
 
 $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/libsubcmd
        $(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(SUBCMD_OUT) \
-                   DESTDIR=$(SUBCMD_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
+                   $(HOST_OVERRIDES) EXTRA_CFLAGS="$(BTF_CFLAGS)" \
+                   DESTDIR=$(LIBBPF_DESTDIR) prefix= subdir= \
                    $(abspath $@) install_headers
 
 $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(LIBBPF_OUT)
        $(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC) OUTPUT=$(LIBBPF_OUT)    \
-                   DESTDIR=$(LIBBPF_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
+                   $(HOST_OVERRIDES) EXTRA_CFLAGS="$(BTF_CFLAGS)" \
+                   DESTDIR=$(LIBBPF_DESTDIR) prefix= subdir= \
                    $(abspath $@) install_headers
 
 LIBELF_FLAGS := $(shell $(HOSTPKG_CONFIG) libelf --cflags 2>/dev/null)
 LIBELF_LIBS  := $(shell $(HOSTPKG_CONFIG) libelf --libs 2>/dev/null || echo -lelf)
 
-CFLAGS += -g \
-          -I$(srctree)/tools/include \
-          -I$(srctree)/tools/include/uapi \
-          -I$(LIBBPF_INCLUDE) \
-          -I$(SUBCMD_INCLUDE) \
-          $(LIBELF_FLAGS)
+BTF_CFLAGS += -g \
+              -I$(srctree)/tools/include \
+              -I$(srctree)/tools/include/uapi \
+              -I$(LIBBPF_INCLUDE) \
+              -I$(SUBCMD_INCLUDE) \
+              $(LIBELF_FLAGS)
 
 LIBS = $(LIBELF_LIBS) -lz
 
@@ -77,7 +79,7 @@ export srctree OUTPUT CFLAGS Q
 include $(srctree)/tools/build/Makefile.include
 
 $(BINARY_IN): fixdep FORCE prepare | $(OUTPUT)
-       $(Q)$(MAKE) $(build)=resolve_btfids $(HOST_OVERRIDES)
+       $(Q)$(MAKE) $(build)=resolve_btfids $(HOST_OVERRIDES) CFLAGS="$(BTF_CFLAGS)"
 
 $(BINARY): $(BPFOBJ) $(SUBCMDOBJ) $(BINARY_IN)
        $(call msg,LINK,$@)
merge bot Applied
#12 lore raw

[tip: objtool/core] objtool: Fix HOSTCC flag usage

In reply to Ian Rogers
The following commit has been merged into the objtool/core branch of tip:

The following commit has been merged into the objtool/core branch of tip:

Commit-ID:     cd955bdd6aa5ec54cdef622a142f8899a64b5446
Gitweb:        https://git.kernel.org/tip/cd955bdd6aa5ec54cdef622a142f8899a64b5446
Author:        Ian Rogers <[email protected]>
AuthorDate:    Thu, 26 Jan 2023 11:06:06 -08:00
Committer:     Josh Poimboeuf <[email protected]>
CommitterDate: Wed, 01 Feb 2023 09:15:18 -08:00

objtool: Fix HOSTCC flag usage

HOSTCC is always wanted when building objtool. Setting CC to HOSTCC happens after tools/scripts/Makefile.include is included, meaning flags (like CFLAGS) are set assuming say CC is gcc, but then it can be later set to HOSTCC which may be clang. tools/scripts/Makefile.include is needed for host set up and common macros in objtool's Makefile. Rather than override the CC variable to HOSTCC, just pass CC as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and also to the linkage step.

---
 tools/objtool/Makefile | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)
tools/objtool/Makefile +15 -12
index d54b669..83b100c 100644
@@ -2,11 +2,6 @@
 include ../scripts/Makefile.include
 include ../scripts/Makefile.arch
 
-# always use the host compiler
-AR	 = $(HOSTAR)
-CC	 = $(HOSTCC)
-LD	 = $(HOSTLD)
-
 ifeq ($(srctree),)
 srctree := $(patsubst %/,%,$(dir $(CURDIR)))
 srctree := $(patsubst %/,%,$(dir $(srctree)))
@@ -34,13 +29,18 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/objtool/include \
 	    -I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
 	    -I$(LIBSUBCMD_OUTPUT)/include
+# Note, EXTRA_WARNINGS here was determined for CC and not HOSTCC, it
+# is passed here to match a legacy behavior.
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
-CFLAGS   := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
-LDFLAGS  += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
 
 # Allow old libelf to be used:
-elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
-CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(HOSTCC) $(OBJTOOL_CFLAGS) -x c -E - | grep elf_getshdr)
+OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+
+# Always want host compilation.
+HOST_OVERRIDES := CC="$(HOSTCC)" LD="$(HOSTLD)" AR="$(HOSTAR)"
 
 AWK = awk
 MKDIR = mkdir
@@ -61,12 +61,14 @@ export BUILD_ORC
 export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
-$(OBJTOOL_IN): fixdep FORCE
+$(OBJTOOL_IN): fixdep $(LIBSUBCMD) FORCE
 	$(Q)$(CONFIG_SHELL) ./sync-check.sh
-	$(Q)$(MAKE) $(build)=objtool
+	$(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
+		LDFLAGS="$(OBJTOOL_LDFLAGS)"
+
 
 $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
-	$(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
+	$(QUIET_LINK)$(HOSTCC) $(OBJTOOL_IN) $(OBJTOOL_LDFLAGS) -o $@
 
 
 $(LIBSUBCMD_OUTPUT):
@@ -75,6 +77,7 @@ $(LIBSUBCMD_OUTPUT):
 $(LIBSUBCMD): fixdep $(LIBSUBCMD_OUTPUT) FORCE
 	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
 		DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+		$(HOST_OVERRIDES) EXTRA_CFLAGS="$(OBJTOOL_CFLAGS)" \
 		$@ install_headers
 
 $(LIBSUBCMD)-clean:
#13 lore raw

Re: [PATCH v4 3/3] objtool: Alter how HOSTCC is forced

In reply to Ian Rogers

Could this patch be backported to LTS branches? Entire build fails if KBUILD_HOSTCFLAGS has flags that would make the libsubcmd incompatible with the built objtool, since those flags were not passed to libsubcmd before this patch.

One example is that the AOSP GKI builds fail since they set a custom sysroot using that variable. For the Google devs, issue b/335829879 is relevant.

maintainer
#14 lore raw
In reply to Ian Rogers
Quoted 26 lines · Ian Rogers

Install libsubcmd and then get headers from there, this avoids inadvertent dependencies on things in tools/lib. Fix V=1 support. Clean up how HOSTCC is used to override CC to avoid CFLAGS being set for say gcc, and then CC being overridden to clang.

v4. Rebase and look to address review comments from Josh Poimboeuf
<[email protected]>. Removes the reviewed-by/tested-by given
the scope of changes.
v3. Is a rebase that removes the merged "tools lib subcmd: Add install
target" patch. In:
https://lore.kernel.org/lkml/CAKwvOd=kgXmpfbVa1wiEvwL0tX3gu+dDTGi-HEiRXSojwCLRrg@mail.gmail.com/
Nick rightly points out that:
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
became:
WARNINGS := -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
losing the EXTRA_WARNINGS which v3 now adds back in. Previous
testing had added the warnings to the end rather than the
beginning, thereby causing unexpected build issues that aren't present in v3.
v2. Include required "tools lib subcmd: Add install target" that is
already in Arnaldo's tree:
https://lore.kernel.org/lkml/[email protected]/
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/commit/?h=perf/core&id=630ae80ea1dd253609cb50cff87f3248f901aca3
When building libsubcmd.a from objtool's Makefile, clear the
subdir to avoid it being appended onto OUTPUT and breaking the
build.

Quoted 4 lines

Ian Rogers (3):
objtool: Install libsubcmd in build
objtool: Properly support make V=1
objtool: Alter how HOSTCC is forced

Thanks, this looks pretty good. I might tweak the patch subjects to describe what's being fixed from a user's perspective.

I'll wait a few days for any more reviews before merging.

Independently from this patch set, I discovered that HOSTCFLAGS (and KBUILD_HOSTCFLAGS which includes -O2 and some other flags) don't work when building objtool directly from tools/objtool. But they do work (for me at least) when building from the top-level Makefile. So I'm not sure what Nick's issue is.

Signature · 1 line
Josh
maintainer
#15 lore raw
Quoted 35 lines · Josh Poimboeuf
Quoted 26 lines · Ian Rogers

Install libsubcmd and then get headers from there, this avoids inadvertent dependencies on things in tools/lib. Fix V=1 support. Clean up how HOSTCC is used to override CC to avoid CFLAGS being set for say gcc, and then CC being overridden to clang.

v4. Rebase and look to address review comments from Josh Poimboeuf
<[email protected]>. Removes the reviewed-by/tested-by given
the scope of changes.
v3. Is a rebase that removes the merged "tools lib subcmd: Add install
target" patch. In:
https://lore.kernel.org/lkml/CAKwvOd=kgXmpfbVa1wiEvwL0tX3gu+dDTGi-HEiRXSojwCLRrg@mail.gmail.com/
Nick rightly points out that:
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
became:
WARNINGS := -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
losing the EXTRA_WARNINGS which v3 now adds back in. Previous
testing had added the warnings to the end rather than the
beginning, thereby causing unexpected build issues that aren't present in v3.
v2. Include required "tools lib subcmd: Add install target" that is
already in Arnaldo's tree:
https://lore.kernel.org/lkml/[email protected]/
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/commit/?h=perf/core&id=630ae80ea1dd253609cb50cff87f3248f901aca3
When building libsubcmd.a from objtool's Makefile, clear the
subdir to avoid it being appended onto OUTPUT and breaking the
build.

Quoted 4 lines

Ian Rogers (3):
objtool: Install libsubcmd in build
objtool: Properly support make V=1
objtool: Alter how HOSTCC is forced

Thanks, this looks pretty good. I might tweak the patch subjects to describe what's being fixed from a user's perspective.

Quoted 7 lines

I'll wait a few days for any more reviews before merging.

Independently from this patch set, I discovered that HOSTCFLAGS (and KBUILD_HOSTCFLAGS which includes -O2 and some other flags) don't work when building objtool directly from tools/objtool. But they do work (for me at least) when building from the top-level Makefile. So I'm not sure what Nick's issue is.

The objtool build is failing intermittently with a clean output tree:

    HOSTCC  /home/jpoimboe/tmp/a/tools/objtool/fixdep.o
    HOSTLD  /home/jpoimboe/tmp/a/tools/objtool/fixdep-in.o
    LINK    /home/jpoimboe/tmp/a/tools/objtool/fixdep

INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/exec-cmd.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/exec-cmd.o
MKDIR /home/jpoimboe/tmp/a/tools/objtool/arch/x86/
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/help.o
CC /home/jpoimboe/tmp/a/tools/objtool/arch/x86/special.o
HOSTLD arch/x86/tools/relocs
In file included from arch/x86/special.c:5:
/home/jpoimboe/git/linux/tools/objtool/include/objtool/builtin.h:8:10: fatal error: subcmd/parse-options.h: No such file or directory
8 | #include <subcmd/parse-options.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[5]: *** [/home/jpoimboe/git/linux/tools/build/Makefile.build:97: /home/jpoimboe/tmp/a/tools/objtool/arch/x86/special.o] Error 1 make[4]: *** [/home/jpoimboe/git/linux/tools/build/Makefile.build:139: arch/x86] Error 2
make[3]: *** [Makefile:66: /home/jpoimboe/tmp/a/tools/objtool/objtool-in.o] Error 2
make[3]: *** Waiting for unfinished jobs....
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/help.h
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/pager.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/pager.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/parse-options.o
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/parse-options.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/run-command.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/sigchain.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/subcmd-config.o
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/run-command.h

The libsubcmd header files need to be installed before any of the objtool files gets compiled, so objtool-in.o needs a dependency on $(LIBSUBCMD). I'll fold in the following fix:

tools/objtool/Makefile +1 -1
index bbf8ec440430..1e90dad0b23b 100644
@@ -61,7 +61,7 @@ export BUILD_ORC
 export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
-$(OBJTOOL_IN): fixdep FORCE
+$(OBJTOOL_IN): fixdep $(LIBSUBCMD) FORCE
 	$(Q)$(CONFIG_SHELL) ./sync-check.sh
 	$(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
 		LDFLAGS="$(OBJTOOL_LDFLAGS)"
author
#16 lore raw
Quoted 75 lines · Josh Poimboeuf
Quoted 35 lines · Josh Poimboeuf
Quoted 26 lines · Ian Rogers

Install libsubcmd and then get headers from there, this avoids inadvertent dependencies on things in tools/lib. Fix V=1 support. Clean up how HOSTCC is used to override CC to avoid CFLAGS being set for say gcc, and then CC being overridden to clang.

v4. Rebase and look to address review comments from Josh Poimboeuf
<[email protected]>. Removes the reviewed-by/tested-by given
the scope of changes.
v3. Is a rebase that removes the merged "tools lib subcmd: Add install
target" patch. In:
https://lore.kernel.org/lkml/CAKwvOd=kgXmpfbVa1wiEvwL0tX3gu+dDTGi-HEiRXSojwCLRrg@mail.gmail.com/
Nick rightly points out that:
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
became:
WARNINGS := -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
losing the EXTRA_WARNINGS which v3 now adds back in. Previous
testing had added the warnings to the end rather than the
beginning, thereby causing unexpected build issues that aren't present in v3.
v2. Include required "tools lib subcmd: Add install target" that is
already in Arnaldo's tree:
https://lore.kernel.org/lkml/[email protected]/
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/commit/?h=perf/core&id=630ae80ea1dd253609cb50cff87f3248f901aca3
When building libsubcmd.a from objtool's Makefile, clear the
subdir to avoid it being appended onto OUTPUT and breaking the
build.

Quoted 4 lines

Ian Rogers (3):
objtool: Install libsubcmd in build
objtool: Properly support make V=1
objtool: Alter how HOSTCC is forced

Thanks, this looks pretty good. I might tweak the patch subjects to describe what's being fixed from a user's perspective.

Quoted 7 lines

I'll wait a few days for any more reviews before merging.

Independently from this patch set, I discovered that HOSTCFLAGS (and KBUILD_HOSTCFLAGS which includes -O2 and some other flags) don't work when building objtool directly from tools/objtool. But they do work (for me at least) when building from the top-level Makefile. So I'm not sure what Nick's issue is.

The objtool build is failing intermittently with a clean output tree:

    HOSTCC  /home/jpoimboe/tmp/a/tools/objtool/fixdep.o
    HOSTLD  /home/jpoimboe/tmp/a/tools/objtool/fixdep-in.o
    LINK    /home/jpoimboe/tmp/a/tools/objtool/fixdep

INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/exec-cmd.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/exec-cmd.o
MKDIR /home/jpoimboe/tmp/a/tools/objtool/arch/x86/
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/help.o
CC /home/jpoimboe/tmp/a/tools/objtool/arch/x86/special.o
HOSTLD arch/x86/tools/relocs
In file included from arch/x86/special.c:5:
/home/jpoimboe/git/linux/tools/objtool/include/objtool/builtin.h:8:10: fatal error: subcmd/parse-options.h: No such file or directory
8 | #include <subcmd/parse-options.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[5]: *** [/home/jpoimboe/git/linux/tools/build/Makefile.build:97: /home/jpoimboe/tmp/a/tools/objtool/arch/x86/special.o] Error 1 make[4]: *** [/home/jpoimboe/git/linux/tools/build/Makefile.build:139: arch/x86] Error 2
make[3]: *** [Makefile:66: /home/jpoimboe/tmp/a/tools/objtool/objtool-in.o] Error 2
make[3]: *** Waiting for unfinished jobs....
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/help.h
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/pager.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/pager.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/parse-options.o
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/parse-options.h
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/run-command.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/sigchain.o
CC /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/subcmd-config.o
INSTALL /home/jpoimboe/tmp/a/tools/objtool/libsubcmd/include/subcmd/run-command.h

Quoted 3 lines

The libsubcmd header files need to be installed before any of the objtool files gets compiled, so objtool-in.o needs a dependency on $(LIBSUBCMD). I'll fold in the following fix:

Right, sorry for that. We fix this elsewhere (not just in perf) with a phony target called "prepare":
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/Makefile.perf?h=perf/core#n672
The prepare target has a list of dependencies that must be built first, such as installing header files.

Thanks and apologies again,
Ian

Quoted 14 lines
tools/objtool/Makefile +1 -1
index bbf8ec440430..1e90dad0b23b 100644
@@ -61,7 +61,7 @@ export BUILD_ORC
 export srctree OUTPUT CFLAGS SRCARCH AWK
 include $(srctree)/tools/build/Makefile.include
 
-$(OBJTOOL_IN): fixdep FORCE
+$(OBJTOOL_IN): fixdep $(LIBSUBCMD) FORCE
        $(Q)$(CONFIG_SHELL) ./sync-check.sh
        $(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
                LDFLAGS="$(OBJTOOL_LDFLAGS)"