Skip to contentSkip to conversation

Ooops: 0000 [#1] PIONEER DVD-RW DVR-K12RA

DISCUSSION Rechberger Markus 2 participants 4 messages Mar 23, 2005 – Mar 25, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

just got that message when I tried to mount a cd

Kernel: 2.6.11.5

0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)

ATAPI CD-ROM, with removable media

        Model Number:       PIONEER DVD-RW DVR-K12RA                
        Serial Number:      DBDL085110WL       
        Firmware Revision:  1.10    

Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 64.0kB
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* DEVICE RESET cmd
* PACKET command feature set
* Power Management feature set
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper

Oops: 0000 [#1]
PREEMPT 
Modules linked in: isofs ext3 jbd md5 ipv6 pcmcia joydev evdev

yenta_socket rsrc_nonstatic pcmcia_core sd_mod snd_intel8x0m 8250_pci 8250 serial_core snd_intel8x0 snd_ac97_codec hw_random usb_storage usb_midi snd_usb_audio snd_pcm snd_timer snd_page_alloc snd_usb_lib snd_rawmidi snd eth1394 ehci_hcd uhci_hcd b44 mii ohci1394 dm_mod sg audio sr_mod cdrom usbcore soundcore ide_scsi sbp2 scsi_mod ieee1394 rtc unix

CPU:    0
EIP:    0060:[<c01ad0c6>]    Not tainted VLI
EFLAGS: 00010246   (2.6.11.5) 

EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
ds: 007b es: 007b ss: 0068
Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)

Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020 
       d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0 
       00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8 
Call Trace:
 [<c01ad15f>] kobject_get_path+0x1f/0x80
 [<c01adb98>] do_kobject_uevent+0x28/0x110
 [<c01adca8>] kobject_uevent+0x28/0x30
 [<c015bade>] bdev_uevent+0x2e/0x50
 [<c015bc76>] kill_block_super+0x26/0x60
 [<c015ad9e>] deactivate_super+0x6e/0xa0
 [<c015bc21>] get_sb_bdev+0x121/0x150
 [<c0172050>] alloc_vfsmnt+0x90/0xd0
 [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
 [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
 [<c015be67>] do_kern_mount+0x57/0xe0
 [<c017332c>] do_new_mount+0x9c/0xe0
 [<c0173a47>] do_mount+0x157/0x1b0
 [<c0173893>] copy_mount_options+0x63/0xc0
 [<c0173e3f>] sys_mount+0x9f/0xe0
 [<c01031af>] syscall_call+0x7/0xb
Code: 90 8d 74 26 00 55 bd ff ff ff ff 57 56 be 01 00 00 00 53 8b 54

24 14 31 db 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 3a 89 e9 89 d8 <f2> ae f7 d1 49 8b 52 24 8d 74 31 01 85 d2 75 ea 5b 89 f0 5e 5f

Markus

#1 lore raw
Quoted 24 lines · Rechberger Markus

Hi,

just got that message when I tried to mount a cd

...

EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
ds: 007b es: 007b ss: 0068
Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)

Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020 
       d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0 
       00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8 
Call Trace:
 [<c01ad15f>] kobject_get_path+0x1f/0x80
 [<c01adb98>] do_kobject_uevent+0x28/0x110
 [<c01adca8>] kobject_uevent+0x28/0x30
 [<c015bade>] bdev_uevent+0x2e/0x50
 [<c015bc76>] kill_block_super+0x26/0x60
 [<c015ad9e>] deactivate_super+0x6e/0xa0
 [<c015bc21>] get_sb_bdev+0x121/0x150
 [<c0172050>] alloc_vfsmnt+0x90/0xd0
Quoted 8 lines
 [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
 [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
 [<c015be67>] do_kern_mount+0x57/0xe0
 [<c017332c>] do_new_mount+0x9c/0xe0
 [<c0173a47>] do_mount+0x157/0x1b0
 [<c0173893>] copy_mount_options+0x63/0xc0
 [<c0173e3f>] sys_mount+0x9f/0xe0
 [<c01031af>] syscall_call+0x7/0xb

Is this repeatable? If so, are you able to devise a formula which allows others to releat it?

#2 lore raw

oh yes I tried to record a cd and something tried to mount the empty cd - mount uses to segfault there.

Quoted 38 lines · Andrew Morton
Quoted 24 lines · Rechberger Markus

Hi,

just got that message when I tried to mount a cd

...

EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
ds: 007b es: 007b ss: 0068
Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)

Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
       d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
       00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
Call Trace:
 [<c01ad15f>] kobject_get_path+0x1f/0x80
 [<c01adb98>] do_kobject_uevent+0x28/0x110
 [<c01adca8>] kobject_uevent+0x28/0x30
 [<c015bade>] bdev_uevent+0x2e/0x50
 [<c015bc76>] kill_block_super+0x26/0x60
 [<c015ad9e>] deactivate_super+0x6e/0xa0
 [<c015bc21>] get_sb_bdev+0x121/0x150
 [<c0172050>] alloc_vfsmnt+0x90/0xd0
Quoted 8 lines
 [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
 [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
 [<c015be67>] do_kern_mount+0x57/0xe0
 [<c017332c>] do_new_mount+0x9c/0xe0
 [<c0173a47>] do_mount+0x157/0x1b0
 [<c0173893>] copy_mount_options+0x63/0xc0
 [<c0173e3f>] sys_mount+0x9f/0xe0
 [<c01031af>] syscall_call+0x7/0xb

Is this repeatable? If so, are you able to devise a formula which allows others to releat it?

#3 lore raw

ok that problem is solved I set up scsi emulation for the cd/dvd recorder which didn't work correctly, but it works fine with ide/ATAPI support!

thanks anyway,
Markus

Quoted 44 lines · Rechberger Markus

oh yes I tried to record a cd and something tried to mount the empty cd - mount uses to segfault there.

Quoted 38 lines · Andrew Morton
Quoted 24 lines · Rechberger Markus

Hi,

just got that message when I tried to mount a cd

...

EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
ds: 007b es: 007b ss: 0068
Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)

Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
       d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
       00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
Call Trace:
 [<c01ad15f>] kobject_get_path+0x1f/0x80
 [<c01adb98>] do_kobject_uevent+0x28/0x110
 [<c01adca8>] kobject_uevent+0x28/0x30
 [<c015bade>] bdev_uevent+0x2e/0x50
 [<c015bc76>] kill_block_super+0x26/0x60
 [<c015ad9e>] deactivate_super+0x6e/0xa0
 [<c015bc21>] get_sb_bdev+0x121/0x150
 [<c0172050>] alloc_vfsmnt+0x90/0xd0
Quoted 8 lines
 [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
 [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
 [<c015be67>] do_kern_mount+0x57/0xe0
 [<c017332c>] do_new_mount+0x9c/0xe0
 [<c0173a47>] do_mount+0x157/0x1b0
 [<c0173893>] copy_mount_options+0x63/0xc0
 [<c0173e3f>] sys_mount+0x9f/0xe0
 [<c01031af>] syscall_call+0x7/0xb

Is this repeatable? If so, are you able to devise a formula which allows others to releat it?