Skip to contentSkip to conversation

Upload firmware through TFTP on REDFISH interface.

DISCUSSION Xiaochao Ma (马小超) 2 participants 2 messages Oct 8, 2019

lore
Share & tools
lore
#0 lore raw

Hi, all.

I'm trying to update firmware using REDFISH interface. It can successfully upload images through TFTP on the BMCweb. However, the firmware upgrade command in
https://github.com/openbmc/docs/blob/master/REDFISH-cheatsheet.md
failed.(Through TFTP method)
The TFTP command here is not configured.
The results of the command are as follows:

$ curl -k -H "X-Auth-Token: $token" -X POST https://${bmc}/redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate -d '{"TransferProtocol":"TFTP","ImageURI":"obmc-phosphor-image-fp5280g2-20190924042243.static.mtd.tar"}'
  Not Found

How should the address of TFTP be configured?

#1 lore raw
Quoted 11 lines · Xiaochao Ma (马小超)

Hi, all.

I'm trying to update firmware using REDFISH interface. It can successfully upload images through TFTP on the BMCweb. However, the firmware upgrade command in
https://github.com/openbmc/docs/blob/master/REDFISH-cheatsheet.md
failed.(Through TFTP method)
The TFTP command here is not configured.
The results of the command are as follows:

Quoted 1 line
$ curl -k -H "X-Auth-Token: $token" -X POST https://${bmc}/redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate -d '{"TransferProtocol":"TFTP","ImageURI":"obmc-phosphor-image-fp5280g2-20190924042243.static.mtd.tar"}'

First make sure you have TFTP update enabled in bmcweb:
(BMCWEB_INSECURE_ENABLE_REDFISH_FW_TFTP_UPDATE)
https://github.com/openbmc/bmcweb/blob/master/CMakeLists.txt#L57

Then you need to be sure to provide the IP address of the TFTP server in your URI
-d '{"TransferProtocol":"TFTP","ImageURI":"<ip address of TFTP server>/obmc-phosphor-image-fp5280g2-20190924042243.static.mtd.tar"}'

Quoted 3 lines

How should the address of TFTP be configured?