Skip to contentSkip to conversation

Platform configuration and the host-tool questions

phosphor-ipmi-blobs-binarystore George Hung (洪忠敬) 2 participants 2 messages Nov 6, 2019 – Nov 20, 2019

lore
Share & tools
lore
#0 lore raw

Hi Kun,

I'd like to add a platform configuration file for blob basd id and sysfile path, but I always get the return error, "Encountered error when parsing config file". Is my config file format wrong or something I missed ?

My example config.json:
{
"blobBaseId": "/skm/hss/",
"sysFilePath": "/sys/class/i2c-dev/i2c-8/device/8-0058/eeprom", "offsetBytes": 256,
"maxSizeBytes": 1024
}

BTW, is there the utility such as the host-tool of phosphor-ipmi-flash to test ?

Thanks.

Best Regards
George Hung
Research Division - Software Engineer
Quanta Computer Inc.
Ext: 16830
E-Mail : [email protected]

#1 lore raw

Hi George,

Sorry for the late reply. The current configuration expected is an array, so you would need:

[{
"blobBaseId": "/skm/hss/",
"sysFilePath": "/sys/class/i2c-dev/i2c-8/device/8-0058/eeprom", "offsetBytes": 256,
"maxSizeBytes": 1024
}]

The documentation on the configuration file format isn't super clear. I will send a patch to improve it.
Currently there is no host-side tools like phosphor-ipmi-flash. Hope this helps.

Quoted 29 lines · George Hung (洪忠敬)

Hi Kun,

I'd like to add a platform configuration file for blob basd id and sysfile path, but I always get the return error, "Encountered error when parsing config file".
Is my config file format wrong or something I missed ?

My example config.json:
{
"blobBaseId": "/skm/hss/",
"sysFilePath": "/sys/class/i2c-dev/i2c-8/device/8-0058/eeprom", "offsetBytes": 256,
"maxSizeBytes": 1024
}

BTW, is there the utility such as the host-tool of phosphor-ipmi-flash to test ?

Thanks.

Best Regards
George Hung
Research Division - Software Engineer
Quanta Computer Inc.
Ext: 16830
E-Mail : [email protected]

Signature · 2 lines
Regards,
Kun