ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
PATCH 1/1 ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
From: Aleksey Nasibulin <[email protected]>
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM.
--- arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +2 -1
@@ -19,7 +19,8 @@ chosen { memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; gpio-keys {
Signature · 1 line
2.40.1
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts chosen { · line 23
Quoted 9 lines
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +2
-1@@ -19,7 +19,8 @@ chosen { memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>;
So there is a hole in the middle? Does this require any special CONFIG_ option to support sparse memory?
Andrew
Rafał Miłecki
maintainerQuoted 4 lines · Andrew Lunn
Quoted 4 lines
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +0
-0@@ -19,7 +19,8 @@ chosen {
Quoted 8 lines
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts chosen { · line 23
Quoted 5 lines
arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +2
-1memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>;So there is a hole in the middle? Does this require any special
CONFIG_option to support sparse memory?
This is how RAM is mapped on all known Northstar devices. Using two blocks.
I've heard there is a way to design Northstar SoC board to have all RAM in one region but thay requires disabling something (I don't remember what) and in practice to vendor decided to do that.
AFAIK no extra CONFIG_* option is needed to make Linux map multiple RAM regions.
Quoted 9 lines · Christian Marangi
From: Aleksey Nasibulin <[email protected]>
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM.
Fixes 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")Signed-off-by Aleksey Nasibulin <[email protected]>Signed-off-by Christian Marangi <[email protected]>
From: Florian Fainelli <[email protected]>
Quoted 10 lines · Christian Marangi
From: Aleksey Nasibulin <[email protected]>
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM.
Fixes 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")Signed-off-by Aleksey Nasibulin <[email protected]>Signed-off-by Christian Marangi <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian