microvm: memory config tweaks
cover microvm: memory config tweaks
With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...
take care,
Gerd
Gerd Hoffmann (3):
microvm: use 2G split unconditionally
microvm: drop max-ram-below-4g support
x86: move max-ram-below-4g to pc
include/hw/i386/pc.h | 2 ++ include/hw/i386/x86.h | 4 ---- hw/i386/microvm.c | 35 +------------------------------- hw/i386/pc.c | 46 +++++++++++++++++++++++++++++++++++++++++++ hw/i386/pc_piix.c | 10 +++++----- hw/i386/pc_q35.c | 10 +++++----- hw/i386/x86.c | 46 ------------------------------------------- 7 files changed, 59 insertions(+), 94 deletions(-)
Signature · 1 line
2.18.4
PATCH 1/3 microvm: use 2G split unconditionally
Looks like the logic was copied over from q35.
q35 does this for backward compatibility, there is no reason to do this on microvm though. So split @ 2G unconditionally.
--- hw/i386/microvm.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)
hw/i386/microvm.c +1 -15
@@ -170,23 +170,9 @@ static void microvm_memory_init(MicrovmMachineState *mms)MemoryRegion *ram_below_4g, *ram_above_4g;MemoryRegion *system_memory =get_system_memory ();FWCfgState *fw_cfg; -ram_addr_t lowmem; +ram_addr_t lowmem =0x80000000 ;/* 2G */ int i; -/* -* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory -* and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping -* also known as MMCFG). -* If it doesn't, we need to split it in chunks below and above 4G. -* In any case, try to make sure that guest addresses aligned at -* 1G boundaries get mapped to host addresses aligned at 1G boundaries. -*/ -if (machine->ram_size >=0xb0000000 ) { - lowmem =0x80000000 ; - }else { - lowmem =0xb0000000 ; - } -/* * Handle the machine opt max-ram-below-4g. It is basically doing * min(qemu limit, user limit).
Signature · 1 line
2.18.4
PATCH 2/3 microvm: drop max-ram-below-4g support
In reply to Gerd HoffmannNot useful for microvm and allows users to shot themself into the foot (make ram + mmio overlap).
--- hw/i386/microvm.c | 19 ------------------- 1 file changed, 19 deletions(-)
hw/i386/microvm.c +0 -19
@@ -173,25 +173,6 @@ static void microvm_memory_init(MicrovmMachineState *mms)ram_addr_t lowmem =0x80000000 ;/* 2G */ int i; -/* -* Handle the machine opt max-ram-below-4g. It is basically doing -* min(qemu limit, user limit). -*/ -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =4 * GiB; - } -if (lowmem > x86ms->max_ram_below_4g) { - lowmem = x86ms->max_ram_below_4g; -if (machine->ram_size - lowmem > lowmem && - lowmem & (1 * GiB -1 )) { -warn_report ("There is possibly poor performance as the ram size " -" (0x%" PRIx64") is more then twice the size of" -" max-ram-below-4g (%" PRIu64") and" -" max-ram-below-4g is not a multiple of 1G." , - (uint64_t )machine->ram_size, x86ms->max_ram_below_4g); - } - } -if (machine->ram_size > lowmem) { x86ms->above_4g_mem_size = machine->ram_size - lowmem; x86ms->below_4g_mem_size = lowmem;
Signature · 1 line
2.18.4
Re: [PATCH 2/3] microvm: drop max-ram-below-4g support
Quoted 1 line · On Mon, 25 May 2020 15:41:00 +0200 Gerd Hoffmann <[email protected]> wrote:
Not useful for microvm and allows users to shot themself
s/shot/shoot/
Quoted 1 line
into the foot (make ram + mmio overlap).
also see my toher reply to previous version, parhaps we can drop some more logic here
Quoted 1 line
Signed-off-by Gerd Hoffmann <[email protected]>
Quoted 34 lines
--- hw/i386/microvm.c | 19 ------------------- 1 file changed, 19 deletions(-)hw/i386/microvm.c +0
-19@@ -173,25 +173,6 @@ static void microvm_memory_init(MicrovmMachineState *mms)ram_addr_t lowmem =0x80000000 ;/* 2G */ int i; -/* -* Handle the machine opt max-ram-below-4g. It is basically doing -* min(qemu limit, user limit). -*/ -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =4 * GiB; - } -if (lowmem > x86ms->max_ram_below_4g) { - lowmem = x86ms->max_ram_below_4g; -if (machine->ram_size - lowmem > lowmem && - lowmem & (1 * GiB -1 )) { -warn_report ("There is possibly poor performance as the ram size " -" (0x%" PRIx64") is more then twice the size of" -" max-ram-below-4g (%" PRIu64") and" -" max-ram-below-4g is not a multiple of 1G." , - (uint64_t )machine->ram_size, x86ms->max_ram_below_4g); - } - } -if (machine->ram_size > lowmem) { x86ms->above_4g_mem_size = machine->ram_size - lowmem; x86ms->below_4g_mem_size = lowmem;
PATCH 3/3 x86: move max-ram-below-4g to pc
In reply to Gerd HoffmannMove from X86MachineClass to PCMachineClass so it disappears from microvm machine type property list.
--- include/hw/i386/pc.h | 2 ++ include/hw/i386/x86.h | 4 ---- hw/i386/pc.c | 46 +++++++++++++++++++++++++++++++++++++++++++ hw/i386/pc_piix.c | 10 +++++----- hw/i386/pc_q35.c | 10 +++++----- hw/i386/x86.c | 46 ------------------------------------------- 6 files changed, 58 insertions(+), 60 deletions(-)
include/hw/i386/pc.h +2 -0
@@ -35,6 +35,7 @@ struct PCMachineState {PFlashCFI01 *flash[2 ];/* Configuration options: */ +uint64_t max_ram_below_4g;OnOffAuto vmport;bool acpi_build_enabled;
@@ -51,6 +52,7 @@ struct PCMachineState { };#define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device" +#define PC_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"#define PC_MACHINE_DEVMEM_REGION_SIZE "device-memory-region-size"#define PC_MACHINE_VMPORT "vmport"#define PC_MACHINE_SMBUS "smbus"
include/hw/i386/x86.h +0 -4
@@ -51,9 +51,6 @@ typedef struct {qemu_irq *gsi;GMappedFile *initrd_mapped_file; -/* Configuration options: */ -uint64_t max_ram_below_4g; -/* RAM information (sizes, addresses, configuration): */ ram_addr_t below_4g_mem_size, above_4g_mem_size;
@@ -82,7 +79,6 @@ typedef struct {AddressSpace *ioapic_as; } X86MachineState; -#define X86_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"#define X86_MACHINE_SMM "smm"#define X86_MACHINE_ACPI "acpi"
hw/i386/pc.c +46 -0
64 lines not on this page · raw message
hw/i386/pc_piix.c +5 -5
@@ -127,11 +127,11 @@ static void pc_init1(MachineState *machine,if (xen_enabled ()) {xen_hvm_init (pcms, &ram_memory); }else { -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =0xe0000000 ;/* default: 3.5G */ +if (!pcms->max_ram_below_4g) { + pcms->max_ram_below_4g =0xe0000000 ;/* default: 3.5G */ } - lowmem = x86ms->max_ram_below_4g; -if (machine->ram_size >= x86ms->max_ram_below_4g) { + lowmem = pcms->max_ram_below_4g; +if (machine->ram_size >= pcms->max_ram_below_4g) {if (pcmc->gigabyte_align) {if (lowmem >0xc0000000 ) { lowmem =0xc0000000 ;
@@ -140,7 +140,7 @@ static void pc_init1(MachineState *machine,warn_report ("Large machine and max_ram_below_4g " "(%" PRIu64") not a multiple of 1G; " "possible bad performance." , - x86ms->max_ram_below_4g); + pcms->max_ram_below_4g); } } }
hw/i386/pc_q35.c +5 -5
@@ -154,18 +154,18 @@ static void pc_q35_init(MachineState *machine)/* Handle the machine opt max-ram-below-4g. It is basically doing * min(qemu limit, user limit). */ -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =4 * GiB; +if (!pcms->max_ram_below_4g) { + pcms->max_ram_below_4g =4 * GiB; } -if (lowmem > x86ms->max_ram_below_4g) { - lowmem = x86ms->max_ram_below_4g; +if (lowmem > pcms->max_ram_below_4g) { + lowmem = pcms->max_ram_below_4g;if (machine->ram_size - lowmem > lowmem && lowmem & (1 * GiB -1 )) {warn_report ("There is possibly poor performance as the ram size " " (0x%" PRIx64") is more then twice the size of" " max-ram-below-4g (%" PRIu64") and" " max-ram-below-4g is not a multiple of 1G." , - (uint64_t )machine->ram_size, x86ms->max_ram_below_4g); + (uint64_t )machine->ram_size, pcms->max_ram_below_4g); } }
hw/i386/x86.c +0 -46
64 lines not on this page · raw message
Signature · 1 line
2.18.4
Re: [PATCH 3/3] x86: move max-ram-below-4g to pc
Quoted 245 lines · Gerd Hoffmann
Move from X86MachineClass to PCMachineClass so it disappears from microvm machine type property list.
Signed-off-by Gerd Hoffmann <[email protected]>--- include/hw/i386/pc.h | 2 ++ include/hw/i386/x86.h | 4 ---- hw/i386/pc.c | 46 +++++++++++++++++++++++++++++++++++++++++++ hw/i386/pc_piix.c | 10 +++++----- hw/i386/pc_q35.c | 10 +++++----- hw/i386/x86.c | 46 ------------------------------------------- 6 files changed, 58 insertions(+), 60 deletions(-)include/hw/i386/pc.h +2
-0@@ -35,6 +35,7 @@ struct PCMachineState {PFlashCFI01 *flash[2 ];/* Configuration options: */ +uint64_t max_ram_below_4g;OnOffAuto vmport;bool acpi_build_enabled;@@ -51,6 +52,7 @@ struct PCMachineState { };#define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device" +#define PC_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"#define PC_MACHINE_DEVMEM_REGION_SIZE "device-memory-region-size"#define PC_MACHINE_VMPORT "vmport"#define PC_MACHINE_SMBUS "smbus"include/hw/i386/x86.h +0
-4@@ -51,9 +51,6 @@ typedef struct {qemu_irq *gsi;GMappedFile *initrd_mapped_file; -/* Configuration options: */ -uint64_t max_ram_below_4g; -/* RAM information (sizes, addresses, configuration): */ ram_addr_t below_4g_mem_size, above_4g_mem_size;@@ -82,7 +79,6 @@ typedef struct {AddressSpace *ioapic_as; } X86MachineState; -#define X86_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"#define X86_MACHINE_SMM "smm"#define X86_MACHINE_ACPI "acpi"hw/i386/pc.c +46
-0@@ -1856,6 +1856,45 @@ static void pc_machine_set_pit(Object *obj, bool value, Error **errp) pcms->pit_enabled = value; } +static void pc_machine_get_max_ram_below_4g (Object *obj,Visitor *v, +const char *name,void *opaque, +Error **errp) +{ +PCMachineState *pcms =PC_MACHINE (obj); +uint64_t value = pcms->max_ram_below_4g; + +visit_type_size (v, name, &value, errp); +} + +static void pc_machine_set_max_ram_below_4g (Object *obj,Visitor *v, +const char *name,void *opaque, +Error **errp) +{ +PCMachineState *pcms =PC_MACHINE (obj); +Error *error =NULL ; +uint64_t value; + +visit_type_size (v, name, &value, &error); +if (error) { +error_propagate (errp, error); +return ; + } +if (value >4 * GiB) { +error_setg (&error, +"Machine option 'max-ram-below-4g=%" PRIu64 +"' expects size less than or equal to 4G" , value); +error_propagate (errp, error); +return ; + } + +if (value <1 * MiB) { +warn_report ("Only %" PRIu64" bytes of RAM below the 4GiB boundary," +"BIOS may not work with less than 1MiB" , value); + } + + pcms->max_ram_below_4g = value; +} +static void pc_machine_initfn (Object *obj) {PCMachineState *pcms =PC_MACHINE (obj);@@ -1865,6 +1904,7 @@ static void pc_machine_initfn(Object *obj)#else pcms->vmport =ON_OFF_AUTO_OFF ;#endif /* CONFIG_VMPORT */ + pcms->max_ram_below_4g =0 ;/* use default */ /* acpi build is enabled by default if machine supports it */ pcms->acpi_build_enabled =PC_MACHINE_GET_CLASS (pcms)->has_acpi_build; pcms->smbus_enabled = true;@@ -1963,6 +2003,12 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) mc->numa_mem_supported = true; mc->default_ram_id ="pc.ram" ; +object_class_property_add (oc,PC_MACHINE_MAX_RAM_BELOW_4G ,"size" , + pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, +NULL ,NULL ); +object_class_property_set_description (oc,PC_MACHINE_MAX_RAM_BELOW_4G , +"Maximum ram below the 4G boundary (32bit boundary)" ); +object_class_property_add (oc,PC_MACHINE_DEVMEM_REGION_SIZE ,"int" , pc_machine_get_device_memory_region_size,NULL ,NULL ,NULL );hw/i386/pc_piix.c +5
-5@@ -127,11 +127,11 @@ static void pc_init1(MachineState *machine,if (xen_enabled ()) {xen_hvm_init (pcms, &ram_memory); }else { -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =0xe0000000 ;/* default: 3.5G */ +if (!pcms->max_ram_below_4g) { + pcms->max_ram_below_4g =0xe0000000 ;/* default: 3.5G */ } - lowmem = x86ms->max_ram_below_4g; -if (machine->ram_size >= x86ms->max_ram_below_4g) { + lowmem = pcms->max_ram_below_4g; +if (machine->ram_size >= pcms->max_ram_below_4g) {if (pcmc->gigabyte_align) {if (lowmem >0xc0000000 ) { lowmem =0xc0000000 ;@@ -140,7 +140,7 @@ static void pc_init1(MachineState *machine,warn_report ("Large machine and max_ram_below_4g " "(%" PRIu64") not a multiple of 1G; " "possible bad performance." , - x86ms->max_ram_below_4g); + pcms->max_ram_below_4g); } } }hw/i386/pc_q35.c +5
-5@@ -154,18 +154,18 @@ static void pc_q35_init(MachineState *machine)/* Handle the machine opt max-ram-below-4g. It is basically doing * min(qemu limit, user limit). */ -if (!x86ms->max_ram_below_4g) { - x86ms->max_ram_below_4g =4 * GiB; +if (!pcms->max_ram_below_4g) { + pcms->max_ram_below_4g =4 * GiB; } -if (lowmem > x86ms->max_ram_below_4g) { - lowmem = x86ms->max_ram_below_4g; +if (lowmem > pcms->max_ram_below_4g) { + lowmem = pcms->max_ram_below_4g;if (machine->ram_size - lowmem > lowmem && lowmem & (1 * GiB -1 )) {warn_report ("There is possibly poor performance as the ram size " " (0x%" PRIx64") is more then twice the size of" " max-ram-below-4g (%" PRIu64") and" " max-ram-below-4g is not a multiple of 1G." , - (uint64_t )machine->ram_size, x86ms->max_ram_below_4g); + (uint64_t )machine->ram_size, pcms->max_ram_below_4g); } }hw/i386/x86.c +0
-40@@ -846,45 +846,6 @@ void x86_bios_rom_init(MemoryRegion *rom_memory, bool isapc_ram_fw) bios); } -static void x86_machine_get_max_ram_below_4g (Object *obj,Visitor *v, -const char *name,void *opaque, -Error **errp) -{ -X86MachineState *x86ms =X86_MACHINE (obj); -uint64_t value = x86ms->max_ram_below_4g; - -visit_type_size (v, name, &value, errp); -} - -static void x86_machine_set_max_ram_below_4g (Object *obj,Visitor *v, -const char *name,void *opaque, -Error **errp) -{ -X86MachineState *x86ms =X86_MACHINE (obj); -Error *error =NULL ; -uint64_t value; - -visit_type_size (v, name, &value, &error); -if (error) { -error_propagate (errp, error); -return ; - } -if (value >4 * GiB) { -error_setg (&error, -"Machine option 'max-ram-below-4g=%" PRIu64 -"' expects size less than or equal to 4G" , value); -error_propagate (errp, error); -return ; - } - -if (value <1 * MiB) { -warn_report ("Only %" PRIu64" bytes of RAM below the 4GiB boundary," -"BIOS may not work with less than 1MiB" , value); - } - - x86ms->max_ram_below_4g = value; -} -bool x86_machine_is_smm_enabled (X86MachineState *x86ms) {bool smm_available = false;@@ -958,7 +919,6 @@ static void x86_machine_initfn(Object *obj) x86ms->smm =ON_OFF_AUTO_AUTO ; x86ms->acpi =ON_OFF_AUTO_AUTO ; - x86ms->max_ram_below_4g =0 ;/* use default */ x86ms->smp_dies =1 ; x86ms->apicid_from_cpu_idx = x86_apicid_from_cpu_idx;@@ -980,12 +940,6 @@ static void x86_machine_class_init(ObjectClass *oc, void *data) x86mc->save_tsc_khz = true; nc->nmi_monitor_handler = x86_nmi;
hw/i386/x86.c static void x86_machine_class_init(ObjectClass *oc, void *data) · line 945
Quoted 10 lines
hw/i386/x86.c +0
-6-object_class_property_add (oc,X86_MACHINE_MAX_RAM_BELOW_4G ,"size" , - x86_machine_get_max_ram_below_4g, x86_machine_set_max_ram_below_4g, -NULL ,NULL ); -object_class_property_set_description (oc,X86_MACHINE_MAX_RAM_BELOW_4G , -"Maximum ram below the 4G boundary (32bit boundary)" ); -object_class_property_add (oc,X86_MACHINE_SMM ,"OnOffAuto" , x86_machine_get_smm, x86_machine_set_smm,NULL ,NULL );
Good!
Quoted 11 lines · Gerd Hoffmann
With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...
take care,
GerdGerd Hoffmann (3):
microvm: use 2G split unconditionally
microvm: drop max-ram-below-4g support
x86: move max-ram-below-4g to pc
Quoted 9 lines
include/hw/i386/pc.h | 2 ++ include/hw/i386/x86.h | 4 ---- hw/i386/microvm.c | 35 +------------------------------- hw/i386/pc.c | 46 +++++++++++++++++++++++++++++++++++++++++++ hw/i386/pc_piix.c | 10 +++++----- hw/i386/pc_q35.c | 10 +++++----- hw/i386/x86.c | 46 ------------------------------------------- 7 files changed, 59 insertions(+), 94 deletions(-)
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===
CC aarch64-softmmu/qapi/qapi-types-machine-target.o
CC aarch64-softmmu/qapi/qapi-types-misc-target.o/tmp/qemu-test/src/hw/i386/xen/xen-hvm.c: In function 'xen_ram_init':/tmp/qemu-test/src/hw/i386/xen/xen-hvm.c:206:34: error: 'X86_MACHINE_MAX_RAM_BELOW_4G' undeclared (first use in this function)
X86_MACHINE_MAX_RAM_BELOW_4G,
^/tmp/qemu-test/src/hw/i386/xen/xen-hvm.c:206:34: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [hw/i386/xen/xen-hvm.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC aarch64-softmmu/qapi/qapi-types.o
CC aarch64-softmmu/qapi/qapi-visit-machine-target.o
---
CC aarch64-softmmu/qapi/qapi-events-machine-target.o CC aarch64-softmmu/qapi/qapi-events-misc-target.o CC aarch64-softmmu/qapi/qapi-events.o
make: *** [x86_64-softmmu/all] Error 2
make: *** Waiting for unfinished jobs....
CC aarch64-softmmu/qapi/qapi-commands-machine-target.o
CC aarch64-softmmu/qapi/qapi-commands-misc-target.o
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=6355d775870e40b7b24b057ce98613cb', '-u', '1003', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew2/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-nzkk4v5m/src/docker-src.2020-05-25-21.44.46.13774:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=6355d775870e40b7b24b057ce98613cb
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-nzkk4v5m/src'
make: *** [docker-run-test-quick@centos7] Error 2
real 3m1.633s
user 0m8.168s
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===
CC x86_64-softmmu/target/i386/excp_helper.o
CC x86_64-softmmu/target/i386/fpu_helper.o
CC x86_64-softmmu/target/i386/int_helper.o
/tmp/qemu-test/src/hw/i386/xen/xen-hvm.c:206:34: error: use of undeclared identifier 'X86_MACHINE_MAX_RAM_BELOW_4G'
X86_MACHINE_MAX_RAM_BELOW_4G,
^1 error generated.
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/i386/xen/xen-hvm.o] Error 1 make[1]: *** Waiting for unfinished jobs....
CC x86_64-softmmu/target/i386/mem_helper.o
make: *** [Makefile:527: x86_64-softmmu/all] Error 2
Traceback (most recent call last):
File "./tests/docker/docker.py", line 664, in <module>
sys.exit(main())
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=a2fe8fb6681b4eafbb6da25a6234866a', '-u', '1003', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=x86_64-softmmu', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew2/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-u67ad0wm/src/docker-src.2020-05-25-21.48.27.23221:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-debug']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=a2fe8fb6681b4eafbb6da25a6234866a
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-u67ad0wm/src'
make: *** [docker-run-test-debug@fedora] Error 2
real 4m14.520s
user 0m8.700s
The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]