input/i8042: Add quirk table to disable aux port on Clevo NS70MU
Subsystems (2)
PATCH v2 1/1 input/i8042: Add quirk table to disable aux port on Clevo NS70MU
At least one modern Clevo barebone has the touchpad connected both via PS/2 and i2c interface. This causes a race condition between the psmouse and i2c-hid driver. Since the full capability if the touchpad is available via the i2c interface and the device has no external PS/2 port, it is save to just ignore all ps2 mouses here to avoid this issue.
The know affected device is the Clevo NS70MU.
This patch adds a new i8042_dmi_noaux_table with the dmi strings of the affected device of different revisions. The table is then evaluated like the other quirk tables in the i8042 driver.
This is revision 2 as I got aware that there are yet another 2 dmi string combinations identifying the same device.
--- drivers/input/serio/i8042-x86ia64io.h | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
drivers/input/serio/i8042-x86ia64io.h +54 -0
@@ -1013,6 +1013,57 @@ static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = { { } }; +static const struct dmi_system_id i8042_dmi_noaux_table[]__initconst = { +/* +* At least one modern Clevo barebone has the touchpad connected +* both via PS/2 and i2c interface. This causes a race condition +* between the psmouse and i2c-hid driver. Since the full +* capability if the touchpad is available via the i2c interface +* and the device has no external PS/2 port, it is save to just +* ignore all ps2 mouses here to avoid this issue. +* The know affected device is the +* TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with +* one of the 6 different dmi string combinations below. +*/ + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"TUXEDO" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"TUXEDO" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"SchenkerTechnologiesGmbH" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"SchenkerTechnologiesGmbH" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Notebook" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Notebook" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { } +}; +#endif /* CONFIG_X86 */ #ifdef CONFIG_PNP
@@ -1336,6 +1387,9 @@ static int __init i8042_platform_init(void)if (dmi_check_system (i8042_dmi_probe_defer_table)) i8042_probe_defer = true; +if (dmi_check_system (i8042_dmi_noaux_table)) + i8042_noaux = true; +/* * A20 was already enabled during early kernel init. But some buggy * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
Signature · 1 line
2.25.1
Quoted 6 lines
At least one modern Clevo barebone has the touchpad connected both via PS/2 and i2c interface. This causes a race condition between the psmouse and i2c-hid driver. Since the full capability if the touchpad is available via the i2c interface and the device has no external PS/2 port, it is save to just ignore all ps2 mouses here to avoid this issue.
Quoted 8 lines
The know affected device is the Clevo NS70MU.
This patch adds a new
i8042_dmi_noaux_tablewith the dmi strings of the affected device of different revisions. The table is then evaluated like the other quirk tables in the i8042 driver.This is revision 2 as I got aware that there are yet another 2 dmi string combinations identifying the same device.
Please let me know if a patch like this could be accepted or if the i8042 quirk tables are in a freeze state and issues like this should be fixed another way now?
Quoted 78 lines
Signed-off-by Werner Sembach <[email protected]>--- drivers/input/serio/i8042-x86ia64io.h | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)drivers/input/serio/i8042-x86ia64io.h +54
-0@@ -1013,6 +1013,57 @@ static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = { { } }; +static const struct dmi_system_id i8042_dmi_noaux_table[]__initconst = { +/* +* At least one modern Clevo barebone has the touchpad connected +* both via PS/2 and i2c interface. This causes a race condition +* between the psmouse and i2c-hid driver. Since the full +* capability if the touchpad is available via the i2c interface +* and the device has no external PS/2 port, it is save to just +* ignore all ps2 mouses here to avoid this issue. +* The know affected device is the +* TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with +* one of the 6 different dmi string combinations below. +*/ + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"TUXEDO" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"TUXEDO" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"SchenkerTechnologiesGmbH" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"SchenkerTechnologiesGmbH" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Notebook" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50MU" ), + }, + }, + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Notebook" ), +DMI_MATCH (DMI_BOARD_NAME ,"NS50_70MU" ), + }, + }, + { } +}; +#endif /* CONFIG_X86 */ #ifdef CONFIG_PNP @@ -1336,6 +1387,9 @@ static int __init i8042_platform_init(void)if (dmi_check_system (i8042_dmi_probe_defer_table)) i8042_probe_defer = true; +if (dmi_check_system (i8042_dmi_noaux_table)) + i8042_noaux = true; +/* * A20 was already enabled during early kernel init. But some buggy * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to