Add ov9655 camera driver
PATCH 1/1 Add ov9655 camera driver
Add a driver for the OmniVision ov9655 camera sensor. The driver use the soc_camera framework.
It was tested on the BeBot robot with a PXA270 processor.
---
linux/drivers/media/video/Kconfig +6 -0
@@ -746,6 +746,12 @@ config SOC_CAMERA_OV772X help This is a ov772x camera driver +config SOC_CAMERA_OV9655 + tristate "ov9655 camera support" + depends on SOC_CAMERA && I2C + help + This driver supports OV9655 cameras from OmniVision + config MX1_VIDEO bool
linux/drivers/media/video/Makefile +1 -0
@@ -145,6 +145,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o +obj-$(CONFIG_SOC_CAMERA_OV9655) += ov9655.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o
linux/drivers/media/video/ov9655.c new file +1307 -0
1,307 lines not on this page · raw message
Quoted 5 lines · Stefan Herbrechtsmeier
Add a driver for the OmniVision ov9655 camera sensor. The driver use the
soc_cameraframework.
It was tested on the BeBot robot with a PXA270 processor.Signed-off-by Stefan Herbrechtsmeier <[email protected]>
Hans, does it make sense to include this one or shall we wait for gspca on this one too?
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
A message that is not in the archive (sent off-list or not yet received): 1239044648.4346.2.camel@ubtonio
Quoted 1 line · aderach
Does this driver is working for ov534 with 9657 sensor ID ?
I don't know the ov534. The sensor ID is the same.
At the moment the driver support only the YUV formats. I don't know, which format the ov534 expect.
Quoted 2 lines
Where did you find the document to write this code?
I haven't a real documentation. I get the preliminary OV9655 datasheet with the register description from OmniVision.
Most of the register values in the driver were extracted from the inf file of the evaluation board driver. I compare the values for the different output sizes and analyze them. Based on this and some test I write the driver.
Regards
Stefan
Quoted 27 lines
-------- Message initial --------
*De*: Guennadi Liakhovetski <[email protected] <mailto:Guennadi%20Liakhovetski%20%[email protected]%3e>>
*À*: Stefan Herbrechtsmeier <[email protected] <mailto:Stefan%20Herbrechtsmeier%20%[email protected]%3e>>
*Cc*: Linux Media Mailing List <[email protected] <mailto:Linux%20Media%20Mailing%20List%20%[email protected]%3e>>, Hans Verkuil <[email protected] <mailto:Hans%20Verkuil%20%[email protected]%3e>> *Sujet*: Re: [PATCH] Add ov9655 camera driver
*Date*: Mon, 6 Apr 2009 17:58:57 +0200 (CEST)Quoted 5 lines · Stefan Herbrechtsmeier
Add a driver for the OmniVision ov9655 camera sensor. The driver use the
soc_cameraframework.
It was tested on the BeBot robot with a PXA270 processor.Signed-off-by Stefan Herbrechtsmeier <[email protected] <mailto:[email protected]>>Hans, does it make sense to include this one or shall we wait for gspca on this one too?
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] <mailto:[email protected]> More majordomo info at http://vger.kernel.org/majordomo-info.html