Asus P5A Reboots
Hi,
I'm having trouble running the installation for Arch 0.7.1 on an Asus P5A motherboard. The installation uses the 2.6.15 kernel and the problem is that during, or immediately after, the initrd decompression stage the machine reboots.
I've tried running an alternative installation kernel without SCSI support as well as a number of kernel parameters (noacpi, noapm, acpi=off), none of which helped.
The hardware is good, it is currently running another operating system without issue and I gave the memory a thorough check with memtest86+ not too long ago.
I have no idea where to even begin to find the source of this problem but if anybody could offer some ideas or suggestions I would appreciate it.
Thanks.
Simon
P.S. Please CC me on any replies as I'm not subscribed to the list.
Quoted 7 lines · Simon Morgan
I'm having trouble running the installation for Arch 0.7.1 on an Asus P5A
motherboard. The installation uses the 2.6.15 kernel and the problem is
that during, or immediately after, the initrd decompression stage the machine reboots.
you most likely are getting an i686 kernel, while the cpu you have is an AMD K6 which doesn't support the cmov instruction as used in i686 kernels...
Quoted 3 lines · Arjan van de Ven
you most likely are getting an i686 kernel, while the cpu you have is an AMD K6 which doesn't support the cmov instruction as used in i686 kernels...
You're completely right. I'm an idiot. Thanks for your help.
Simon