bnxt patchset
cover bnxt patchset
Patchset against dpdk-next-net.
Please apply.
Ajit Khaparde (5):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
Somnath Kotur (2):
net/bnxt: get rid of ff pools array and use the vnic info array net/bnxt: fix uninitialized ptr access in transmit handler
drivers/net/bnxt/bnxt.h | 27 +- drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 311 +- drivers/net/bnxt/bnxt_filter.c | 28 +- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_hwrm.c | 381 +- drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_rxq.c | 20 +- drivers/net/bnxt/bnxt_stats.c | 221 +- drivers/net/bnxt/bnxt_txr.c | 5 +- drivers/net/bnxt/bnxt_vnic.c | 42 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 20527 +++++++++++++++---------------- 12 files changed, 10442 insertions(+), 11138 deletions(-)
Signature · 1 line
2.15.2 (Apple Git-101.1)
PATCH 1/7 net/bnxt: get rid of ff pools array and use the vnic info array
From: Somnath Kotur <[email protected]>
There was no direct association between the rxq's vnic and the vnic_info[]. Explicitly associate the two in bnxt_mq_rx_configure().
--- drivers/net/bnxt/bnxt.h | 4 - drivers/net/bnxt/bnxt_ethdev.c | 275 ++++++++++++++++++++--------------------- drivers/net/bnxt/bnxt_filter.c | 28 ++--- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_rxq.c | 20 +-- drivers/net/bnxt/bnxt_vnic.c | 42 ++----- 6 files changed, 173 insertions(+), 208 deletions(-)
drivers/net/bnxt/bnxt.h +0 -4
@@ -285,10 +285,6 @@ struct bnxt {struct bnxt_filter_info *filter_info; STAILQ_HEAD(, bnxt_filter_info) free_filter_list; -/* VNIC pointer for flow filter (VMDq) pools */ -#define MAX_FF_POOLS 256 - STAILQ_HEAD(, bnxt_vnic_info) ff_pool[MAX_FF_POOLS]; -struct bnxt_irq *irq_tbl;#define MAX_NUM_MAC_ADDR 32
drivers/net/bnxt/bnxt_ethdev.c +135 -140
387 lines not on this page · raw message
drivers/net/bnxt/bnxt_filter.c +14 -14
@@ -80,21 +80,21 @@ void bnxt_free_all_filters(struct bnxt *bp) {struct bnxt_vnic_info *vnic;struct bnxt_filter_info *filter, *temp_filter; -int i; - -for (i =0 ; i <MAX_FF_POOLS ; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { - filter =STAILQ_FIRST (&vnic->filter); -while (filter) { - temp_filter =STAILQ_NEXT (filter, next); -STAILQ_REMOVE (&vnic->filter, filter, - bnxt_filter_info, next); -STAILQ_INSERT_TAIL (&bp->free_filter_list, - filter, next); - filter = temp_filter; - } -STAILQ_INIT (&vnic->filter); +unsigned int i; + +// for (i = 0; i < MAX_FF_POOLS; i++) { +for (i =0 ; i < bp->nr_vnics; i++) { + vnic = &bp->vnic_info[i]; + filter =STAILQ_FIRST (&vnic->filter); +while (filter) { + temp_filter =STAILQ_NEXT (filter, next); +STAILQ_REMOVE (&vnic->filter, filter, + bnxt_filter_info, next); +STAILQ_INSERT_TAIL (&bp->free_filter_list, + filter, next); + filter = temp_filter; } +STAILQ_INIT (&vnic->filter); }for (i =0 ; i < bp->pf.max_vfs; i++) {
drivers/net/bnxt/bnxt_flow.c +6 -6
@@ -678,7 +678,7 @@ bnxt_get_l2_filter(struct bnxt *bp, struct bnxt_filter_info *nf,struct bnxt_vnic_info *vnic0;int rc; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; f0 =STAILQ_FIRST (&vnic0->filter);/* This flow has same DST MAC as the port/l2 filter. */
@@ -763,8 +763,8 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, }PMD_DRV_LOG (DEBUG ,"Queue index %d\n" , act_q->index); - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); - vnic =STAILQ_FIRST (&bp->ff_pool[act_q->index]); + vnic0 = &bp->vnic_info[0 ]; + vnic = &bp->vnic_info[act_q->index];if (vnic ==NULL ) { rte_flow_error_set(error, EINVAL,
@@ -786,7 +786,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,PMD_DRV_LOG (DEBUG ,"VNIC found\n" );break ;case RTE_FLOW_ACTION_TYPE_DROP : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -802,7 +802,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP ;break ;case RTE_FLOW_ACTION_TYPE_COUNT : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -854,7 +854,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, filter->mirror_vnic_id = dflt_vnic; filter->enables |=NTUPLE_FLTR_ALLOC_INPUT_EN_MIRROR_VNIC_ID ; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
drivers/net/bnxt/bnxt_rxq.c +11 -9
@@ -43,21 +43,19 @@ int bnxt_mq_rx_configure(struct bnxt *bp)/* Single queue mode */ if (bp->rx_cp_nr_rings <2 ) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[0 ];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[0 ], vnic, next); bp->nr_vnics++; rxq = bp->eth_dev->data->rx_queues[0 ]; rxq->vnic = vnic; vnic->func_default = true; - vnic->ff_pool_idx =0 ; vnic->start_grp_id =0 ; vnic->end_grp_id = vnic->start_grp_id; filter =bnxt_alloc_filter (bp);
@@ -85,6 +83,9 @@ int bnxt_mq_rx_configure(struct bnxt *bp)RTE_MIN (bp->max_l2_ctx,RTE_MIN (bp->max_rsscos_ctx, ETH_64_POOLS))); +PMD_DRV_LOG (ERR , +"pools = %u max_pools = %u\n" , + pools, max_pools);if (pools > max_pools) pools = max_pools;break ;
@@ -98,25 +99,28 @@ int bnxt_mq_rx_configure(struct bnxt *bp) goto err_out; } } - nb_q_per_grp = bp->rx_cp_nr_rings / pools; +PMD_DRV_LOG (DEBUG , +"pools = %u nb_q_per_grp = %u\n" , pools, nb_q_per_grp); start_grp_id =0 ; end_grp_id = nb_q_per_grp;for (i =0 ; i < pools; i++) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[i];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[i], vnic, next); bp->nr_vnics++;for (j =0 ; j < nb_q_per_grp; j++, ring_idx++) { rxq = bp->eth_dev->data->rx_queues[ring_idx]; rxq->vnic = vnic; +PMD_DRV_LOG (DEBUG , +"rxq[%d] = %p vnic[%d] = %p\n" , + ring_idx, rxq, i, vnic); }if (i ==0 ) {if (dev_conf->rxmode.mq_mode Ð_MQ_RX_VMDQ_DCB ) {
@@ -125,7 +129,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) } vnic->func_default = true; } - vnic->ff_pool_idx = i; vnic->start_grp_id = start_grp_id; vnic->end_grp_id = end_grp_id;
@@ -176,7 +179,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp) hash_type |=HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 ;for (i =0 ; i < bp->nr_vnics; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { + vnic = &bp->vnic_info[i]; vnic->hash_type = hash_type;/*
@@ -187,7 +190,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) rss->rss_key_len <= HW_HASH_KEY_SIZE)memcpy (vnic->rss_hash_key, rss->rss_key, rss->rss_key_len); - } } }
drivers/net/bnxt/bnxt_vnic.c +7 -35
62 lines not on this page · raw message
Signature · 1 line
2.15.2 (Apple Git-101.1)
Re: [PATCH 1/7] net/bnxt: get rid of ff pools array and use the vnic info array
Quoted 10 lines · Ajit Khaparde
From: Somnath Kotur <[email protected]>
There was no direct association between the rxq's vnic and the vnic_info[]. Explicitly associate the two in
bnxt_mq_rx_configure().Fixes f7c3d72afff7 ("net/bnxt: fix Rx ring count limitation")Signed-off-by Somnath Kotur <[email protected]>Signed-off-by Ajit Khaparde <[email protected]>
<...>
drivers/net/bnxt/bnxt_vnic.c struct bnxt_vnic_info *bnxt_alloc_vnic(struct bnxt *bp) · line 93
Quoted 8 lines
void
bnxt_free_vnic_attributes(struct bnxt *bp)
{drivers/net/bnxt/bnxt_vnic.c +2
-1struct bnxt_vnic_info *vnic; +unsigned int i; - STAILQ_FOREACH(vnic, &bp->free_vnic_list, next) { +for (i =0 ; i < bp->nr_vnics; i++) {if (vnic->rss_table) {
Here vnic accessed without initial value [1], I guess intention was:
"vnic = &bp->vnic_info[i];" before access.
[1].../drivers/net/bnxt/bnxt_vnic.c:93:7: error: variable 'vnic' is uninitialized when used here [-Werror,-Wuninitialized]
if (vnic->rss_table) {
^~~~Re: [PATCH 1/7] net/bnxt: get rid of ff pools array and use the vnic info array
Quoted 7 lines · Ferruh Yigit
Quoted 6 lines · Ajit Khaparde
From: Somnath Kotur <[email protected]>
There was no direct association between the rxq's vnic and the vnic_info[]. Explicitly associate the two in
bnxt_mq_rx_configure().Fixes f7c3d72afff7 ("net/bnxt: fix Rx ring count limitation")
Wrong 'Fixes' reference:
Correct one seems:
Quoted 25 lines
Quoted 4 lines
Signed-off-by Somnath Kotur <[email protected]>Signed-off-by Ajit Khaparde <[email protected]><...>
drivers/net/bnxt/bnxt_vnic.c struct bnxt_vnic_info *bnxt_alloc_vnic(struct bnxt *bp) · line 93
Quoted 8 lines
void
bnxt_free_vnic_attributes(struct bnxt *bp)
{drivers/net/bnxt/bnxt_vnic.c +2
-1struct bnxt_vnic_info *vnic; +unsigned int i; - STAILQ_FOREACH(vnic, &bp->free_vnic_list, next) { +for (i =0 ; i < bp->nr_vnics; i++) {if (vnic->rss_table) {Here vnic accessed without initial value [1], I guess intention was:
"vnic = &bp->vnic_info[i];" before access.[1]
.../drivers/net/bnxt/bnxt_vnic.c:93:7: error: variable 'vnic' is uninitialized when used here [-Werror,-Wuninitialized]if (vnic->rss_table) { ^~~~
v2 cover bnxt patchset
Patchset against dpdk-next-net.
v1->v2:
net/bnxt: get rid of ff pools array and use the vnic info array instead
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.
net/bnxt: update HWRM version
- Update from 1.9.2.45 to version 1.9.2.53
Please apply.
Ajit Khaparde (8):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
net/bnxt: set MAC filtering as outer for non tunnel frames net/bnxt: set a VNIC as default only once net/bnxt: remove excess log messages
Bei Sun (1):
net/bnxt: set VLAN strip mode before default vnic cfg
Somnath Kotur (2):
net/bnxt: get rid of ff pools array and use the vnic info array
instead
net/bnxt: fix uninitialized ptr access in transmit handler
yongping (1):
net/bnxt: use correct macro to register VF async event completion ring
drivers/net/bnxt/bnxt.h | 28 +- drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 322 +- drivers/net/bnxt/bnxt_filter.c | 28 +- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_hwrm.c | 414 +- drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_rxq.c | 19 +- drivers/net/bnxt/bnxt_stats.c | 221 +- drivers/net/bnxt/bnxt_txr.c | 5 +- drivers/net/bnxt/bnxt_vnic.c | 43 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 24017 +++++++++++------------ 12 files changed, 12225 insertions(+), 12890 deletions(-)
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 1/12 net/bnxt: get rid of ff pools array and use the vnic info array instead
From: Somnath Kotur <[email protected]>
There was no direct association between the rxq's vnic and the vnic_info[]. Explicitly associate the two in bnxt_mq_rx_configure().
--v1->v2:
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.
--- drivers/net/bnxt/bnxt.h | 4 - drivers/net/bnxt/bnxt_ethdev.c | 274 ++++++++++++++++----------------- drivers/net/bnxt/bnxt_filter.c | 28 ++-- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_rxq.c | 19 +-- drivers/net/bnxt/bnxt_vnic.c | 43 +----- 6 files changed, 172 insertions(+), 208 deletions(-)
drivers/net/bnxt/bnxt.h +0 -4
@@ -285,10 +285,6 @@ struct bnxt {struct bnxt_filter_info *filter_info; STAILQ_HEAD(, bnxt_filter_info) free_filter_list; -/* VNIC pointer for flow filter (VMDq) pools */ -#define MAX_FF_POOLS 256 - STAILQ_HEAD(, bnxt_vnic_info) ff_pool[MAX_FF_POOLS]; -struct bnxt_irq *irq_tbl;#define MAX_NUM_MAC_ADDR 32
drivers/net/bnxt/bnxt_ethdev.c +134 -140
386 lines not on this page · raw message
drivers/net/bnxt/bnxt_filter.c +14 -14
@@ -80,21 +80,21 @@ void bnxt_free_all_filters(struct bnxt *bp) {struct bnxt_vnic_info *vnic;struct bnxt_filter_info *filter, *temp_filter; -int i; - -for (i =0 ; i <MAX_FF_POOLS ; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { - filter =STAILQ_FIRST (&vnic->filter); -while (filter) { - temp_filter =STAILQ_NEXT (filter, next); -STAILQ_REMOVE (&vnic->filter, filter, - bnxt_filter_info, next); -STAILQ_INSERT_TAIL (&bp->free_filter_list, - filter, next); - filter = temp_filter; - } -STAILQ_INIT (&vnic->filter); +unsigned int i; + +// for (i = 0; i < MAX_FF_POOLS; i++) { +for (i =0 ; i < bp->nr_vnics; i++) { + vnic = &bp->vnic_info[i]; + filter =STAILQ_FIRST (&vnic->filter); +while (filter) { + temp_filter =STAILQ_NEXT (filter, next); +STAILQ_REMOVE (&vnic->filter, filter, + bnxt_filter_info, next); +STAILQ_INSERT_TAIL (&bp->free_filter_list, + filter, next); + filter = temp_filter; } +STAILQ_INIT (&vnic->filter); }for (i =0 ; i < bp->pf.max_vfs; i++) {
drivers/net/bnxt/bnxt_flow.c +6 -6
@@ -678,7 +678,7 @@ bnxt_get_l2_filter(struct bnxt *bp, struct bnxt_filter_info *nf,struct bnxt_vnic_info *vnic0;int rc; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; f0 =STAILQ_FIRST (&vnic0->filter);/* This flow has same DST MAC as the port/l2 filter. */
@@ -763,8 +763,8 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, }PMD_DRV_LOG (DEBUG ,"Queue index %d\n" , act_q->index); - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); - vnic =STAILQ_FIRST (&bp->ff_pool[act_q->index]); + vnic0 = &bp->vnic_info[0 ]; + vnic = &bp->vnic_info[act_q->index];if (vnic ==NULL ) { rte_flow_error_set(error, EINVAL,
@@ -786,7 +786,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,PMD_DRV_LOG (DEBUG ,"VNIC found\n" );break ;case RTE_FLOW_ACTION_TYPE_DROP : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -802,7 +802,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP ;break ;case RTE_FLOW_ACTION_TYPE_COUNT : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -854,7 +854,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, filter->mirror_vnic_id = dflt_vnic; filter->enables |=NTUPLE_FLTR_ALLOC_INPUT_EN_MIRROR_VNIC_ID ; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
drivers/net/bnxt/bnxt_rxq.c +10 -9
@@ -43,21 +43,19 @@ int bnxt_mq_rx_configure(struct bnxt *bp)/* Single queue mode */ if (bp->rx_cp_nr_rings <2 ) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[0 ];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[0 ], vnic, next); bp->nr_vnics++; rxq = bp->eth_dev->data->rx_queues[0 ]; rxq->vnic = vnic; vnic->func_default = true; - vnic->ff_pool_idx =0 ; vnic->start_grp_id =0 ; vnic->end_grp_id = vnic->start_grp_id; filter =bnxt_alloc_filter (bp);
@@ -85,6 +83,9 @@ int bnxt_mq_rx_configure(struct bnxt *bp)RTE_MIN (bp->max_l2_ctx,RTE_MIN (bp->max_rsscos_ctx, ETH_64_POOLS))); +PMD_DRV_LOG (DEBUG , +"pools = %u max_pools = %u\n" , + pools, max_pools);if (pools > max_pools) pools = max_pools;break ;
@@ -98,25 +99,27 @@ int bnxt_mq_rx_configure(struct bnxt *bp) goto err_out; } } - nb_q_per_grp = bp->rx_cp_nr_rings / pools; +PMD_DRV_LOG (ERR ,"pools = %u nb_q_per_grp = %u\n" , pools, nb_q_per_grp); start_grp_id =0 ; end_grp_id = nb_q_per_grp;for (i =0 ; i < pools; i++) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[i];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[i], vnic, next); bp->nr_vnics++;for (j =0 ; j < nb_q_per_grp; j++, ring_idx++) { rxq = bp->eth_dev->data->rx_queues[ring_idx]; rxq->vnic = vnic; +PMD_DRV_LOG (DEBUG , +"rxq[%d] = %p vnic[%d] = %p\n" , + ring_idx, rxq, i, vnic); }if (i ==0 ) {if (dev_conf->rxmode.mq_mode Ð_MQ_RX_VMDQ_DCB ) {
@@ -125,7 +128,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) } vnic->func_default = true; } - vnic->ff_pool_idx = i; vnic->start_grp_id = start_grp_id; vnic->end_grp_id = end_grp_id;
@@ -176,7 +178,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp) hash_type |=HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 ;for (i =0 ; i < bp->nr_vnics; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { + vnic = &bp->vnic_info[i]; vnic->hash_type = hash_type;/*
@@ -187,7 +189,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) rss->rss_key_len <= HW_HASH_KEY_SIZE)memcpy (vnic->rss_hash_key, rss->rss_key, rss->rss_key_len); - } } }
drivers/net/bnxt/bnxt_vnic.c +8 -35
63 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 2/12 net/bnxt: fix uninitialized ptr access in transmit handler
In reply to Ajit KhapardeFrom: Somnath Kotur <[email protected]>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1 which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
--- drivers/net/bnxt/bnxt_txr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt_txr.c +3 -2
@@ -120,7 +120,7 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, {struct bnxt_tx_ring_info *txr = txq->tx_ring;struct tx_bd_long *txbd; -struct tx_bd_long_hi *txbd1; +struct tx_bd_long_hi *txbd1 =NULL ;uint32_t vlan_tag_flags, cfa_action;bool long_bd = false;uint16_t last_prod =0 ;
@@ -295,7 +295,8 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, } txbd->flags_type |=TX_BD_LONG_FLAGS_PACKET_END ; - txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); +if (txbd1) + txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); txr->tx_prod =RING_NEXT (txr->tx_ring_struct, txr->tx_prod);
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 3/12 net/bnxt: fix MTU setting
In reply to Ajit KhapardeThe HW can support maximum frame length of 9600 bytes. And we are currently capping the max frame size to 9500 bytes.
--- drivers/net/bnxt/bnxt.h | 2 +- drivers/net/bnxt/bnxt_ethdev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt.h +1 -1
@@ -20,7 +20,7 @@#include "bnxt_cpr.h" -#define BNXT_MAX_MTU 9500 +#define BNXT_MAX_MTU 9578#define VLAN_TAG_SIZE 4#define BNXT_VF_RSV_NUM_RSS_CTX 1#define BNXT_VF_RSV_NUM_L2_CTX 4
drivers/net/bnxt/bnxt_ethdev.c +1 -1
@@ -451,7 +451,7 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,/* Fast path specifics */ dev_info->min_rx_bufsize =1 ; dev_info->max_rx_pktlen =BNXT_MAX_MTU +ETHER_HDR_LEN +ETHER_CRC_LEN - +VLAN_TAG_SIZE ; + +VLAN_TAG_SIZE *2 ; dev_info->rx_offload_capa =BNXT_DEV_RX_OFFLOAD_SUPPORT ;if (bp->flags &BNXT_FLAG_PTP_SUPPORTED )
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 4/12 net/bnxt: update HWRM version
In reply to Ajit KhapardeUpdate the HWRM API to version 1.9.2.53
--v1->v2:
Update from 1.9.2.45 to version 1.9.2.53
--- drivers/net/bnxt/bnxt_stats.c | 12 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 24017 +++++++++++------------ 2 files changed, 11540 insertions(+), 12489 deletions(-)
drivers/net/bnxt/bnxt_stats.c +6 -6
@@ -26,8 +26,8 @@ static const struct bnxt_xstats_name_off bnxt_rx_stats_strings[] = { rx_256b_511b_frames)}, {"rx_512b_1023b_frames" , offsetof(struct rx_port_stats , rx_512b_1023b_frames)}, - {"rx_1024b_1518_frames", offsetof(struct rx_port_stats, - rx_1024b_1518_frames)}, + {"rx_1024b_1518b_frames", offsetof(struct rx_port_stats, + rx_1024b_1518b_frames)}, {"rx_good_vlan_frames", offsetof(struct rx_port_stats, rx_good_vlan_frames)}, {"rx_1519b_2047b_frames", offsetof(struct rx_port_stats,
@@ -93,12 +93,12 @@ static const struct bnxt_xstats_name_off bnxt_tx_stats_strings[] = { tx_256b_511b_frames)}, {"tx_512b_1023b_frames" , offsetof(struct tx_port_stats , tx_512b_1023b_frames)}, - {"tx_1024b_1518_frames", offsetof(struct tx_port_stats, - tx_1024b_1518_frames)}, + {"tx_1024b_1518b_frames", offsetof(struct tx_port_stats, + tx_1024b_1518b_frames)}, {"tx_good_vlan_frames", offsetof(struct tx_port_stats, tx_good_vlan_frames)}, - {"tx_1519b_2047_frames", offsetof(struct tx_port_stats, - tx_1519b_2047_frames)}, + {"tx_1519b_2047b_frames", offsetof(struct tx_port_stats, + tx_1519b_2047b_frames)}, {"tx_2048b_4095b_frames", offsetof(struct tx_port_stats, tx_2048b_4095b_frames)}, {"tx_4096b_9216b_frames", offsetof(struct tx_port_stats,
drivers/net/bnxt/hsi_struct_def_dpdk.h +11534 -12483
2,974 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1 (Apple Git-112)
Part of the diff is not shown here. View the raw message.
Re: [PATCH v2 04/12] net/bnxt: update HWRM version
Quoted 9 lines · Ajit Khaparde
Update the HWRM API to version 1.9.2.53
Signed-off-by Ajit Khaparde <[email protected]>--
v1->v2:
Update from 1.9.2.45 to version 1.9.2.53--- drivers/net/bnxt/bnxt_stats.c | 12 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 24017 +++++++++++------------ 2 files changed, 11540 insertions(+), 12489 deletions(-)
Hi Ajit,
I am aware that this is HWRM API version update but this is a big patch. Are all these updates used for DPDK? Can it be possible to drop some part or can it be possible to split this into multiple logical updates?
Thanks,
ferruh
PATCH v2 5/12 net/bnxt: add support for extended port counters
In reply to Ajit KhapardeThis patch adds support extended port statistics like COS bytes, packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
--- drivers/net/bnxt/bnxt.h | 8 ++ drivers/net/bnxt/bnxt_ethdev.c | 30 ++++- drivers/net/bnxt/bnxt_hwrm.c | 44 +++++++ drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_stats.c | 209 ++++++++++++++++++++++++++++++++- 5 files changed, 289 insertions(+), 7 deletions(-)
drivers/net/bnxt/bnxt.h +8 -0
@@ -250,6 +250,8 @@ struct bnxt {#define BNXT_FLAG_UPDATE_HASH (1 << 5)#define BNXT_FLAG_PTP_SUPPORTED (1 << 6)#define BNXT_FLAG_MULTI_HOST (1 << 7) +#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8) +#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -264,6 +266,9 @@ struct bnxt {const void *rx_mem_zone;struct rx_port_stats *hw_rx_port_stats;rte_iova_t hw_rx_port_stats_map; +struct rx_port_stats_ext *hw_rx_port_stats_ext; +rte_iova_t hw_rx_port_stats_ext_map; +uint16_t fw_rx_port_stats_ext_size;unsigned int tx_nr_rings;unsigned int tx_cp_nr_rings;
@@ -271,6 +276,9 @@ struct bnxt {const void *tx_mem_zone;struct tx_port_stats *hw_tx_port_stats;rte_iova_t hw_tx_port_stats_map; +struct tx_port_stats_ext *hw_tx_port_stats_ext; +rte_iova_t hw_tx_port_stats_ext_map; +uint16_t fw_tx_port_stats_ext_size;/* Default completion ring */ struct bnxt_cp_ring_info *def_cp_ring;
drivers/net/bnxt/bnxt_ethdev.c +28 -2
@@ -3219,7 +3219,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct rx_port_stats ) +512 ); +sizeof (struct rx_port_stats ) + +sizeof (struct rx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len, SOCKET_ID_ANY,
@@ -3255,7 +3257,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct tx_port_stats ) +512 ); +sizeof (struct tx_port_stats ) + +sizeof (struct tx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len,
@@ -3286,8 +3290,30 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) bp->hw_tx_port_stats_map = mz_phys_addr; bp->flags |=BNXT_FLAG_PORT_STATS ; + +/* Display extended statistics if FW supports it */ +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_8_4 || + bp->hwrm_spec_code ==HWRM_SPEC_CODE_1_9_0 ) + goto skip_ext_stats; + + bp->hw_rx_port_stats_ext = (void *) + (bp->hw_rx_port_stats +sizeof (struct rx_port_stats )); + bp->hw_rx_port_stats_ext_map = bp->hw_rx_port_stats_map + +sizeof (struct rx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_RX_PORT_STATS ; + + +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_9_2 ) { + bp->hw_tx_port_stats_ext = (void *) + (bp->hw_tx_port_stats +sizeof (struct tx_port_stats )); + bp->hw_tx_port_stats_ext_map = + bp->hw_tx_port_stats_map + +sizeof (struct tx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_TX_PORT_STATS ; + } } +skip_ext_stats: rc =bnxt_alloc_hwrm_resources (bp);if (rc) { PMD_DRV_LOG(ERR,
drivers/net/bnxt/bnxt_hwrm.c +44 -0
47 lines not on this page · raw message
drivers/net/bnxt/bnxt_hwrm.h +5 -0
@@ -32,6 +32,10 @@ struct bnxt_cp_ring_info;#define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESV_STRATEGY_MINIMAL_STATIC \ HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC +#define HWRM_SPEC_CODE_1_8_4 0x10804 +#define HWRM_SPEC_CODE_1_9_0 0x10900 +#define HWRM_SPEC_CODE_1_9_2 0x10902 +int bnxt_hwrm_cfa_l2_clear_rx_mask (struct bnxt *bp,struct bnxt_vnic_info *vnic); int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic,
@@ -174,4 +178,5 @@ int bnxt_vnic_rss_configure(struct bnxt *bp,int bnxt_hwrm_set_ring_coal (struct bnxt *bp,struct bnxt_coal *coal,uint16_t ring_id);int bnxt_hwrm_check_vf_rings (struct bnxt *bp); +int bnxt_hwrm_ext_port_qstats (struct bnxt *bp);#endif
drivers/net/bnxt/bnxt_stats.c +204 -5
256 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 6/12 net/bnxt: add support to enable new mailbox channel
In reply to Ajit KhapardeFor hardware having multiple embedded management processors the firmware has added support to indicate if the comm channel to the processor has been enabled. If the channel is enabled, switch the CFA NTUPLE and EM filtering commands to use the kong channel.
--- drivers/net/bnxt/bnxt.h | 11 ++ drivers/net/bnxt/bnxt_hwrm.c | 333 ++++++++++++++++++----------------- 2 files changed, 184 insertions(+), 160 deletions(-)
drivers/net/bnxt/bnxt.h +11 -0
@@ -33,6 +33,13 @@#define BNXT_MAX_RX_RING_DESC 8192#define BNXT_DB_SIZE 0x80 +/* Chimp Communication Channel */ +#define GRCPF_REG_CHIMP_CHANNEL_OFFSET 0x0 +#define GRCPF_REG_CHIMP_COMM_TRIGGER 0x100 +/* Kong Communication Channel */ +#define GRCPF_REG_KONG_CHANNEL_OFFSET 0xA00 +#define GRCPF_REG_KONG_COMM_TRIGGER 0xB00 +#define BNXT_INT_LAT_TMR_MIN 75#define BNXT_INT_LAT_TMR_MAX 150#define BNXT_NUM_CMPL_AGGR_INT 36
@@ -252,6 +259,7 @@ struct bnxt {#define BNXT_FLAG_MULTI_HOST (1 << 7)#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9) +#define BNXT_FLAG_KONG_MB_EN (1 << 10)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -259,6 +267,8 @@ struct bnxt {#define BNXT_NPAR (bp) ((bp)->port_partition_type)#define BNXT_MH (bp) ((bp)->flags & BNXT_FLAG_MULTI_HOST)#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp)) +#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp. +#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
@@ -299,6 +309,7 @@ struct bnxt {uint8_t mac_addr[ETHER_ADDR_LEN ];uint16_t hwrm_cmd_seq; +uint16_t kong_cmd_seq;void *hwrm_cmd_resp_addr;rte_iova_t hwrm_cmd_resp_dma_addr;void *hwrm_short_cmd_req_addr;
drivers/net/bnxt/bnxt_hwrm.c +173 -160
1,136 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 7/12 net/bnxt: add support for trusted VF
In reply to Ajit KhapardeIn the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands. Newer firmware has added support to allow VF to be trusted. Now the VF queries if it is a trusted entity and based on that it can send HWRM commands to the firmware.
--- drivers/net/bnxt/bnxt.h | 2 ++ drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 4 ++-- drivers/net/bnxt/bnxt_hwrm.c | 8 ++++++++ 4 files changed, 13 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt.h +2 -0
@@ -260,6 +260,7 @@ struct bnxt {#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_KONG_MB_EN (1 << 10) +#define BNXT_FLAG_TRUSTED_VF_EN (1 << 11)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -269,6 +270,7 @@ struct bnxt {#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp))#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp.#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN) +#define BNXT_VF_IS_TRUSTED (bp) ((bp)->flags & BNXT_FLAG_TRUSTED_VF_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
drivers/net/bnxt/bnxt_cpr.c +1 -0
@@ -35,6 +35,7 @@ void bnxt_handle_async_event(struct bnxt *bp,break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE :PMD_DRV_LOG (INFO ,"Async event: VF config changed\n" ); +bnxt_hwrm_func_qcfg (bp);break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED :PMD_DRV_LOG (INFO ,"Port conn async event\n" );
drivers/net/bnxt/bnxt_ethdev.c +2 -2
@@ -755,7 +755,7 @@ static int bnxt_mac_addr_add_op(struct rte_eth_dev *eth_dev,struct bnxt_vnic_info *vnic = &bp->vnic_info[pool];struct bnxt_filter_info *filter; -if (BNXT_VF (bp)) { +if (BNXT_VF (bp) & !BNXT_VF_IS_TRUSTED (bp)) {PMD_DRV_LOG (ERR ,"Cannot add MAC address to a VF interface\n" );return -ENOTSUP ; }
@@ -1447,7 +1447,7 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)struct bnxt_filter_info *filter;int rc; -if (BNXT_VF (bp)) +if (BNXT_VF (bp) && !BNXT_VF_IS_TRUSTED (bp))return -EPERM ;memcpy (bp->mac_addr, addr,sizeof (bp->mac_addr));
drivers/net/bnxt/bnxt_hwrm.c +8 -0
@@ -909,6 +909,9 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) bp->flags |=BNXT_FLAG_KONG_MB_EN ;PMD_DRV_LOG (DEBUG ,"Kong mailbox channel enabled\n" ); } +if (dev_caps_cfg & +HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_TRUSTED_VF_SUPPORTED ) +PMD_DRV_LOG (DEBUG ,"FW supports Trusted VFs\n" ); error:HWRM_UNLOCK ();
@@ -2458,6 +2461,11 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)if (BNXT_PF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST )) bp->flags |=BNXT_FLAG_MULTI_HOST ; +if (BNXT_VF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF )) { + bp->flags |=BNXT_FLAG_TRUSTED_VF_EN ; +PMD_DRV_LOG (INFO ,"Trusted VF cap enabled\n" ); + } +switch (resp->port_partition_type) {case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 :case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 :
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 8/12 net/bnxt: use correct macro to register VF async event completion ring
In reply to Ajit KhapardeFrom: yongping <[email protected]>
While registering vf's event completion ring to FW, use the wrong macro, FW doesn't set up the event completion ring successfully, VF can't receive any async event.
--- drivers/net/bnxt/bnxt_hwrm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bnxt/bnxt_hwrm.c +1 -1
@@ -3001,7 +3001,7 @@ int bnxt_hwrm_vf_func_cfg_def_cp(struct bnxt *bp)HWRM_PREP (req,FUNC_VF_CFG ,BNXT_USE_CHIMP_MB ); req.enables =rte_cpu_to_le_32 ( -HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); +HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); req.async_event_cr =rte_cpu_to_le_16 ( bp->def_cp_ring->cp_ring_struct->fw_ring_id); rc =bnxt_hwrm_send_message (bp, &req,sizeof (req),BNXT_USE_CHIMP_MB );
Signature · 1 line
2.17.1 (Apple Git-112)
Re: [PATCH v2 08/12] net/bnxt: use correct macro to register VF async event completion ring
Quoted 5 lines · Ajit Khaparde
From: yongping <[email protected]>
While registering vf's event completion ring to FW, use the wrong macro, FW doesn't set up the event completion ring successfully, VF can't receive any async event.
Isn't this a fix that you would want to backport?
If so can you please update the commit log according, and perhaps it can be better to move this patch before HWRM update patch, to help stable tree maintainers.
Quoted 2 lines
Signed-off-by yongping <[email protected]>
Can you please use "Name Surname <mail_address_all_lowercase>" syntax?
Quoted 19 lines
Signed-off-by Ajit Khaparde <[email protected]>--- drivers/net/bnxt/bnxt_hwrm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/net/bnxt/bnxt_hwrm.c +1
-1@@ -3001,7 +3001,7 @@ int bnxt_hwrm_vf_func_cfg_def_cp(struct bnxt *bp)HWRM_PREP (req,FUNC_VF_CFG ,BNXT_USE_CHIMP_MB ); req.enables =rte_cpu_to_le_32 ( -HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); +HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); req.async_event_cr =rte_cpu_to_le_16 ( bp->def_cp_ring->cp_ring_struct->fw_ring_id); rc =bnxt_hwrm_send_message (bp, &req,sizeof (req),BNXT_USE_CHIMP_MB );
PATCH v2 9/12 net/bnxt: set MAC filtering as outer for non tunnel frames
In reply to Ajit KhapardeWe need to set HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST bit in L2_FILTER_ALLOC for filtering non-tunnel packets based on outermost MAC.
--- drivers/net/bnxt/bnxt_hwrm.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/bnxt/bnxt_hwrm.c +2 -0
@@ -383,6 +383,8 @@ int bnxt_hwrm_set_l2_filter(struct bnxt *bp,HWRM_PREP (req,CFA_L2_FILTER_ALLOC ,BNXT_USE_CHIMP_MB ); req.flags =rte_cpu_to_le_32 (filter->flags); + req.flags |= +rte_cpu_to_le_32 (HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST ); enables = filter->enables |HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID ;
Signature · 1 line
2.17.1 (Apple Git-112)
Re: [PATCH v2 09/12] net/bnxt: set MAC filtering as outer for non tunnel frames
Quoted 2 lines · Ajit Khaparde
We need to set
HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOSTbit inL2_FILTER_ALLOCfor filtering non-tunnel packets based on outermost MAC.
What happens if that bit is not set, filtering is not working as expected? If so can you please convert this patch to a fix patch?
Quoted 19 lines
Signed-off-by Ajit Khaparde <[email protected]>--- drivers/net/bnxt/bnxt_hwrm.c | 2 ++ 1 file changed, 2 insertions(+)drivers/net/bnxt/bnxt_hwrm.c +2
-0@@ -383,6 +383,8 @@ int bnxt_hwrm_set_l2_filter(struct bnxt *bp,HWRM_PREP (req,CFA_L2_FILTER_ALLOC ,BNXT_USE_CHIMP_MB ); req.flags =rte_cpu_to_le_32 (filter->flags); + req.flags |= +rte_cpu_to_le_32 (HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST ); enables = filter->enables |HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID ;
PATCH v2 10/12 net/bnxt: set a VNIC as default only once
In reply to Ajit KhapardeIf a vnic is configured as default and the setting has not changed, there is no need to issue this setting again to the FW.
--- drivers/net/bnxt/bnxt.h | 1 + drivers/net/bnxt/bnxt_hwrm.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-)
drivers/net/bnxt/bnxt.h +1 -0
@@ -261,6 +261,7 @@ struct bnxt {#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_KONG_MB_EN (1 << 10)#define BNXT_FLAG_TRUSTED_VF_EN (1 << 11) +#define BNXT_FLAG_DFLT_VNIC_SET (1 << 12)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
drivers/net/bnxt/bnxt_hwrm.c +8 -1
@@ -1460,9 +1460,12 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic) req.cos_rule =rte_cpu_to_le_16 (vnic->cos_rule); req.lb_rule =rte_cpu_to_le_16 (vnic->lb_rule); req.mru =rte_cpu_to_le_16 (vnic->mru); -if (vnic->func_default) +/* Configure default VNIC only once. */ +if (vnic->func_default && !(bp->flags &BNXT_FLAG_DFLT_VNIC_SET )) { req.flags |=rte_cpu_to_le_32 (HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT ); + bp->flags |=BNXT_FLAG_DFLT_VNIC_SET ; + }if (vnic->vlan_strip) req.flags |=rte_cpu_to_le_32 (HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE );
@@ -1600,6 +1603,10 @@ int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic)HWRM_UNLOCK (); vnic->fw_vnic_id =INVALID_HW_RING_ID ; +/* Configure default VNIC again if necessary. */ +if (vnic->func_default && (bp->flags &BNXT_FLAG_DFLT_VNIC_SET )) + bp->flags &= ~BNXT_FLAG_DFLT_VNIC_SET ; +return rc; }
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v2 11/12 net/bnxt: set VLAN strip mode before default vnic cfg
In reply to Ajit KhapardeFrom: Bei Sun <[email protected]>
Firmware sets pf pair in default vnic cfg. If the VLAN strip setting is not available at this time, it will not be configured correctly in the CFA.
Set the desired VLAN strip mode before default vnic configuration.
--- drivers/net/bnxt/bnxt_ethdev.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/net/bnxt/bnxt_ethdev.c +12 -0
@@ -202,7 +202,9 @@ static int bnxt_init_chip(struct bnxt *bp)struct bnxt_rx_queue *rxq;struct rte_eth_link new;struct rte_pci_device *pci_dev =RTE_ETH_DEV_TO_PCI (bp->eth_dev); +struct rte_eth_conf *dev_conf = &bp->eth_dev->data->dev_conf;struct rte_intr_handle *intr_handle = &pci_dev->intr_handle; +uint64_t rx_offloads = dev_conf->rxmode.offloads;uint32_t intr_vector =0 ;uint32_t queue_id, base =BNXT_MISC_VEC_ID ;uint32_t vec =BNXT_MISC_VEC_ID ;
@@ -283,6 +285,16 @@ static int bnxt_init_chip(struct bnxt *bp) } } +/* +* Firmware sets pf pair in default vnic cfg. If the VLAN strip +* setting is not available at this time, it will not be +* configured correctly in the CFA. +*/ +if (rx_offloads &DEV_RX_OFFLOAD_VLAN_STRIP ) + vnic->vlan_strip = true; +else + vnic->vlan_strip = false; + rc =bnxt_hwrm_vnic_cfg (bp, vnic);if (rc) { PMD_DRV_LOG(ERR, "HWRM vnic %d cfg failure rc: %x\n",
Signature · 1 line
2.17.1 (Apple Git-112)
Re: [PATCH v2 11/12] net/bnxt: set VLAN strip mode before default vnic cfg
Quoted 6 lines · Ajit Khaparde
From: Bei Sun <[email protected]>
Firmware sets pf pair in default vnic cfg. If the VLAN strip setting is not available at this time, it will not be configured correctly in the CFA.
Set the desired VLAN strip mode before default vnic configuration.
vnic used as uppercase in prev patch titles, can you please make usage consistent?
Quoted 39 lines
Signed-off-by Bei Sun <[email protected]>Signed-off-by Ajit Khaparde <[email protected]>--- drivers/net/bnxt/bnxt_ethdev.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)drivers/net/bnxt/bnxt_ethdev.c +12
-0@@ -202,7 +202,9 @@ static int bnxt_init_chip(struct bnxt *bp)struct bnxt_rx_queue *rxq;struct rte_eth_link new;struct rte_pci_device *pci_dev =RTE_ETH_DEV_TO_PCI (bp->eth_dev); +struct rte_eth_conf *dev_conf = &bp->eth_dev->data->dev_conf;struct rte_intr_handle *intr_handle = &pci_dev->intr_handle; +uint64_t rx_offloads = dev_conf->rxmode.offloads;uint32_t intr_vector =0 ;uint32_t queue_id, base =BNXT_MISC_VEC_ID ;uint32_t vec =BNXT_MISC_VEC_ID ;@@ -283,6 +285,16 @@ static int bnxt_init_chip(struct bnxt *bp) } } +/* +* Firmware sets pf pair in default vnic cfg. If the VLAN strip +* setting is not available at this time, it will not be +* configured correctly in the CFA. +*/ +if (rx_offloads &DEV_RX_OFFLOAD_VLAN_STRIP ) + vnic->vlan_strip = true; +else + vnic->vlan_strip = false; + rc =bnxt_hwrm_vnic_cfg (bp, vnic);if (rc) { PMD_DRV_LOG(ERR, "HWRM vnic %d cfg failure rc: %x\n",
PATCH v2 12/12 net/bnxt: remove excess log messages
In reply to Ajit KhapardeWhen the firmware version and the driver HWRM version do not match, we are logging some messages. These messages unnecessarily clutter the logs and can add to the noise. We are logging the HWRM version and the firmware version anyway. The difference in version numbers can be gleaned from that. Removing the remaining log messages.
--- drivers/net/bnxt/bnxt_hwrm.c | 20 -------------------- 1 file changed, 20 deletions(-)
drivers/net/bnxt/bnxt_hwrm.c +0 -20
@@ -789,7 +789,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)int rc =0 ;struct hwrm_ver_get_input req = {.req_type =0 };struct hwrm_ver_get_output *resp = bp->hwrm_cmd_resp_addr; -uint32_t my_version;uint32_t fw_version;uint16_t max_resp_len;char type[RTE_MEMZONE_NAMESIZE ];
@@ -817,10 +816,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)PMD_DRV_LOG (INFO ,"Driver HWRM version: %d.%d.%d\n" ,HWRM_VERSION_MAJOR ,HWRM_VERSION_MINOR ,HWRM_VERSION_UPDATE ); - my_version =HWRM_VERSION_MAJOR <<16 ; - my_version |=HWRM_VERSION_MINOR <<8 ; - my_version |=HWRM_VERSION_UPDATE ; - fw_version = resp->hwrm_intf_maj_8b <<16 ; fw_version |= resp->hwrm_intf_min_8b <<8 ; fw_version |= resp->hwrm_intf_upd_8b;
@@ -832,21 +827,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) goto error; } -if (my_version != fw_version) { -PMD_DRV_LOG (INFO ,"BNXT Driver/HWRM API mismatch.\n" ); -if (my_version < fw_version) { -PMD_DRV_LOG (INFO , -"Firmware API version is newer than driver.\n" ); -PMD_DRV_LOG (INFO , -"The driver may be missing features.\n" ); - }else { -PMD_DRV_LOG (INFO , -"Firmware API version is older than driver.\n" ); -PMD_DRV_LOG (INFO , -"Not all driver features may be functional.\n" ); - } - } -if (bp->max_req_len > resp->max_req_win_len) {PMD_DRV_LOG (ERR ,"Unsupported request length\n" ); rc = -EINVAL ;
Signature · 1 line
2.17.1 (Apple Git-112)
Re: [PATCH v2 12/12] net/bnxt: remove excess log messages
Quoted 5 lines · Ajit Khaparde
When the firmware version and the driver HWRM version do not match, we are logging some messages. These messages unnecessarily clutter the logs and can add to the noise. We are logging the HWRM version and the firmware version anyway. The difference in version numbers can be gleaned from that. Removing the remaining log messages.
If these messages are creating noise, wouldn't you want this patch to be backported to stable tree? If so can you please update commit log?
Quoted 52 lines
Signed-off-by Ajit Khaparde <[email protected]>--- drivers/net/bnxt/bnxt_hwrm.c | 20 -------------------- 1 file changed, 20 deletions(-)drivers/net/bnxt/bnxt_hwrm.c +0
-20@@ -789,7 +789,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)int rc =0 ;struct hwrm_ver_get_input req = {.req_type =0 };struct hwrm_ver_get_output *resp = bp->hwrm_cmd_resp_addr; -uint32_t my_version;uint32_t fw_version;uint16_t max_resp_len;char type[RTE_MEMZONE_NAMESIZE ];@@ -817,10 +816,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)PMD_DRV_LOG (INFO ,"Driver HWRM version: %d.%d.%d\n" ,HWRM_VERSION_MAJOR ,HWRM_VERSION_MINOR ,HWRM_VERSION_UPDATE ); - my_version =HWRM_VERSION_MAJOR <<16 ; - my_version |=HWRM_VERSION_MINOR <<8 ; - my_version |=HWRM_VERSION_UPDATE ; - fw_version = resp->hwrm_intf_maj_8b <<16 ; fw_version |= resp->hwrm_intf_min_8b <<8 ; fw_version |= resp->hwrm_intf_upd_8b;@@ -832,21 +827,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) goto error; } -if (my_version != fw_version) { -PMD_DRV_LOG (INFO ,"BNXT Driver/HWRM API mismatch.\n" ); -if (my_version < fw_version) { -PMD_DRV_LOG (INFO , -"Firmware API version is newer than driver.\n" ); -PMD_DRV_LOG (INFO , -"The driver may be missing features.\n" ); - }else { -PMD_DRV_LOG (INFO , -"Firmware API version is older than driver.\n" ); -PMD_DRV_LOG (INFO , -"Not all driver features may be functional.\n" ); - } - } -if (bp->max_req_len > resp->max_req_win_len) {PMD_DRV_LOG (ERR ,"Unsupported request length\n" ); rc = -EINVAL ;
Quoted 25 lines · Ajit Khaparde
Patchset against dpdk-next-net.
v1->v2:
net/bnxt: get rid of ff pools array and use the vnic info array instead
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.net/bnxt: update HWRM version
- Update from 1.9.2.45 to version 1.9.2.53Please apply.
Ajit Khaparde (8):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
net/bnxt: set MAC filtering as outer for non tunnel frames net/bnxt: set a VNIC as default only once net/bnxt: remove excess log messagesBei Sun (1):
net/bnxt: set VLAN strip mode before default vnic cfg
Quoted 7 lines
Somnath Kotur (2):
net/bnxt: get rid of ff pools array and use the vnic info array
instead
net/bnxt: fix uninitialized ptr access in transmit handleryongping (1):
net/bnxt: use correct macro to register VF async event completion ring
Since there will be a new version of the patchset, can you please also check following warnings:
$ ./devtools/check-git-log.sh -12
Headline too long:
net/bnxt: get rid of ff pools array and use the vnic info array instead
net/bnxt: use correct macro to register VF async event completion ring
Is it candidate for Cc: [email protected] backport?
net/bnxt: fix uninitialized ptr access in transmit handlerv3 cover bnxt patchset
Patchset against dpdk-next-net.
v1->v2:
net/bnxt: get rid of ff pools array and use the vnic info array instead
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.
net/bnxt: update HWRM version
- Update from 1.9.2.45 to version 1.9.2.53
v2->v3:
net/bnxt: update HWRM version
- Tried to split into more than one patch.
- Updated commit logs and messages for rest based on review comments.
Please apply.
Ajit Khaparde (10):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: update HWRM version part 2
net/bnxt: update HWRM version part 3
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
net/bnxt: set MAC filtering as outer for non tunnel frames net/bnxt: set a VNIC as default only once net/bnxt: remove excess log messages
Bei Sun (1):
net/bnxt: set VLAN strip mode before default VNIC cfg
Somnath Kotur (2):
net/bnxt: get rid of ff pools and use VNIC info array net/bnxt: fix uninitialized ptr access in transmit handler
Xiaoxin Peng (1):
net/bnxt: reduce the polling interval for valid bit
Yongping Zhang (1):
net/bnxt: fix registration of VF async event completion ring
drivers/net/bnxt/bnxt.h | 28 +- drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 330 +- drivers/net/bnxt/bnxt_filter.c | 28 +- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_hwrm.c | 418 +- drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_rxq.c | 19 +- drivers/net/bnxt/bnxt_stats.c | 221 +- drivers/net/bnxt/bnxt_txr.c | 5 +- drivers/net/bnxt/bnxt_vnic.c | 43 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 24017 +++++++++++------------ 12 files changed, 12229 insertions(+), 12898 deletions(-)
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 1/15 net/bnxt: get rid of ff pools and use VNIC info array
From: Somnath Kotur <[email protected]>
There was no direct association between the rxq's VNIC and the vnic_info[]. Explicitly associate the two in bnxt_mq_rx_configure().
--v1->v2:
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.v2->v3:
- incorporate review comments
--- drivers/net/bnxt/bnxt.h | 4 - drivers/net/bnxt/bnxt_ethdev.c | 274 ++++++++++++++++----------------- drivers/net/bnxt/bnxt_filter.c | 28 ++-- drivers/net/bnxt/bnxt_flow.c | 12 +- drivers/net/bnxt/bnxt_rxq.c | 19 +-- drivers/net/bnxt/bnxt_vnic.c | 43 +----- 6 files changed, 172 insertions(+), 208 deletions(-)
drivers/net/bnxt/bnxt.h +0 -4
@@ -285,10 +285,6 @@ struct bnxt {struct bnxt_filter_info *filter_info; STAILQ_HEAD(, bnxt_filter_info) free_filter_list; -/* VNIC pointer for flow filter (VMDq) pools */ -#define MAX_FF_POOLS 256 - STAILQ_HEAD(, bnxt_vnic_info) ff_pool[MAX_FF_POOLS]; -struct bnxt_irq *irq_tbl;#define MAX_NUM_MAC_ADDR 32
drivers/net/bnxt/bnxt_ethdev.c +134 -140
386 lines not on this page · raw message
drivers/net/bnxt/bnxt_filter.c +14 -14
@@ -80,21 +80,21 @@ void bnxt_free_all_filters(struct bnxt *bp) {struct bnxt_vnic_info *vnic;struct bnxt_filter_info *filter, *temp_filter; -int i; - -for (i =0 ; i <MAX_FF_POOLS ; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { - filter =STAILQ_FIRST (&vnic->filter); -while (filter) { - temp_filter =STAILQ_NEXT (filter, next); -STAILQ_REMOVE (&vnic->filter, filter, - bnxt_filter_info, next); -STAILQ_INSERT_TAIL (&bp->free_filter_list, - filter, next); - filter = temp_filter; - } -STAILQ_INIT (&vnic->filter); +unsigned int i; + +// for (i = 0; i < MAX_FF_POOLS; i++) { +for (i =0 ; i < bp->nr_vnics; i++) { + vnic = &bp->vnic_info[i]; + filter =STAILQ_FIRST (&vnic->filter); +while (filter) { + temp_filter =STAILQ_NEXT (filter, next); +STAILQ_REMOVE (&vnic->filter, filter, + bnxt_filter_info, next); +STAILQ_INSERT_TAIL (&bp->free_filter_list, + filter, next); + filter = temp_filter; } +STAILQ_INIT (&vnic->filter); }for (i =0 ; i < bp->pf.max_vfs; i++) {
drivers/net/bnxt/bnxt_flow.c +6 -6
@@ -678,7 +678,7 @@ bnxt_get_l2_filter(struct bnxt *bp, struct bnxt_filter_info *nf,struct bnxt_vnic_info *vnic0;int rc; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; f0 =STAILQ_FIRST (&vnic0->filter);/* This flow has same DST MAC as the port/l2 filter. */
@@ -763,8 +763,8 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, }PMD_DRV_LOG (DEBUG ,"Queue index %d\n" , act_q->index); - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); - vnic =STAILQ_FIRST (&bp->ff_pool[act_q->index]); + vnic0 = &bp->vnic_info[0 ]; + vnic = &bp->vnic_info[act_q->index];if (vnic ==NULL ) { rte_flow_error_set(error, EINVAL,
@@ -786,7 +786,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,PMD_DRV_LOG (DEBUG ,"VNIC found\n" );break ;case RTE_FLOW_ACTION_TYPE_DROP : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -802,7 +802,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP ;break ;case RTE_FLOW_ACTION_TYPE_COUNT : - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
@@ -854,7 +854,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev, filter->mirror_vnic_id = dflt_vnic; filter->enables |=NTUPLE_FLTR_ALLOC_INPUT_EN_MIRROR_VNIC_ID ; - vnic0 =STAILQ_FIRST (&bp->ff_pool[0 ]); + vnic0 = &bp->vnic_info[0 ]; filter1 =bnxt_get_l2_filter (bp, filter, vnic0);if (filter1 ==NULL ) { rc = -ENOSPC ;
drivers/net/bnxt/bnxt_rxq.c +10 -9
@@ -43,21 +43,19 @@ int bnxt_mq_rx_configure(struct bnxt *bp)/* Single queue mode */ if (bp->rx_cp_nr_rings <2 ) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[0 ];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[0 ], vnic, next); bp->nr_vnics++; rxq = bp->eth_dev->data->rx_queues[0 ]; rxq->vnic = vnic; vnic->func_default = true; - vnic->ff_pool_idx =0 ; vnic->start_grp_id =0 ; vnic->end_grp_id = vnic->start_grp_id; filter =bnxt_alloc_filter (bp);
@@ -85,6 +83,9 @@ int bnxt_mq_rx_configure(struct bnxt *bp)RTE_MIN (bp->max_l2_ctx,RTE_MIN (bp->max_rsscos_ctx, ETH_64_POOLS))); +PMD_DRV_LOG (DEBUG , +"pools = %u max_pools = %u\n" , + pools, max_pools);if (pools > max_pools) pools = max_pools;break ;
@@ -98,25 +99,27 @@ int bnxt_mq_rx_configure(struct bnxt *bp) goto err_out; } } - nb_q_per_grp = bp->rx_cp_nr_rings / pools; +PMD_DRV_LOG (ERR ,"pools = %u nb_q_per_grp = %u\n" , pools, nb_q_per_grp); start_grp_id =0 ; end_grp_id = nb_q_per_grp;for (i =0 ; i < pools; i++) { - vnic =bnxt_alloc_vnic (bp); + vnic = &bp->vnic_info[i];if (!vnic) {PMD_DRV_LOG (ERR ,"VNIC alloc failed\n" ); rc = -ENOMEM ; goto err_out; } vnic->flags |=BNXT_VNIC_INFO_BCAST ; -STAILQ_INSERT_TAIL (&bp->ff_pool[i], vnic, next); bp->nr_vnics++;for (j =0 ; j < nb_q_per_grp; j++, ring_idx++) { rxq = bp->eth_dev->data->rx_queues[ring_idx]; rxq->vnic = vnic; +PMD_DRV_LOG (DEBUG , +"rxq[%d] = %p vnic[%d] = %p\n" , + ring_idx, rxq, i, vnic); }if (i ==0 ) {if (dev_conf->rxmode.mq_mode Ð_MQ_RX_VMDQ_DCB ) {
@@ -125,7 +128,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) } vnic->func_default = true; } - vnic->ff_pool_idx = i; vnic->start_grp_id = start_grp_id; vnic->end_grp_id = end_grp_id;
@@ -176,7 +178,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp) hash_type |=HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 ;for (i =0 ; i < bp->nr_vnics; i++) { - STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) { + vnic = &bp->vnic_info[i]; vnic->hash_type = hash_type;/*
@@ -187,7 +189,6 @@ int bnxt_mq_rx_configure(struct bnxt *bp) rss->rss_key_len <= HW_HASH_KEY_SIZE)memcpy (vnic->rss_hash_key, rss->rss_key, rss->rss_key_len); - } } }
drivers/net/bnxt/bnxt_vnic.c +8 -35
63 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 2/15 net/bnxt: fix uninitialized ptr access in transmit handler
In reply to Ajit KhapardeFrom: Somnath Kotur <[email protected]>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1 which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
--- drivers/net/bnxt/bnxt_txr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt_txr.c +3 -2
@@ -120,7 +120,7 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, {struct bnxt_tx_ring_info *txr = txq->tx_ring;struct tx_bd_long *txbd; -struct tx_bd_long_hi *txbd1; +struct tx_bd_long_hi *txbd1 =NULL ;uint32_t vlan_tag_flags, cfa_action;bool long_bd = false;uint16_t last_prod =0 ;
@@ -295,7 +295,8 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, } txbd->flags_type |=TX_BD_LONG_FLAGS_PACKET_END ; - txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); +if (txbd1) + txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); txr->tx_prod =RING_NEXT (txr->tx_ring_struct, txr->tx_prod);
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 3/15 net/bnxt: fix MTU setting
In reply to Ajit KhapardeThe HW can support maximum frame length of 9600 bytes. And we are currently capping the max frame size to 9500 bytes.
--- drivers/net/bnxt/bnxt.h | 2 +- drivers/net/bnxt/bnxt_ethdev.c | 10 +++------- 2 files changed, 4 insertions(+), 8 deletions(-)
drivers/net/bnxt/bnxt.h +1 -1
@@ -20,7 +20,7 @@#include "bnxt_cpr.h" -#define BNXT_MAX_MTU 9500 +#define BNXT_MAX_MTU 9574#define VLAN_TAG_SIZE 4#define BNXT_VF_RSV_NUM_RSS_CTX 1#define BNXT_VF_RSV_NUM_L2_CTX 4
drivers/net/bnxt/bnxt_ethdev.c +3 -7
@@ -451,7 +451,7 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,/* Fast path specifics */ dev_info->min_rx_bufsize =1 ; dev_info->max_rx_pktlen =BNXT_MAX_MTU +ETHER_HDR_LEN +ETHER_CRC_LEN - +VLAN_TAG_SIZE ; + +VLAN_TAG_SIZE *2 ; dev_info->rx_offload_capa =BNXT_DEV_RX_OFFLOAD_SUPPORT ;if (bp->flags &BNXT_FLAG_PTP_SUPPORTED )
@@ -1564,21 +1564,17 @@ static int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu) {struct bnxt *bp = eth_dev->data->dev_private;struct rte_eth_dev_info dev_info; -uint32_t max_dev_mtu;uint32_t rc =0 ;uint32_t i;bnxt_dev_info_get_op (eth_dev, &dev_info); - max_dev_mtu = dev_info.max_rx_pktlen - -ETHER_HDR_LEN -ETHER_CRC_LEN -VLAN_TAG_SIZE *2 ; -if (new_mtu <ETHER_MIN_MTU || new_mtu > max_dev_mtu) { +if (new_mtu <ETHER_MIN_MTU || new_mtu >BNXT_MAX_MTU ) {PMD_DRV_LOG (ERR ,"MTU requested must be within (%d, %d)\n" , -ETHER_MIN_MTU , max_dev_mtu); +ETHER_MIN_MTU ,BNXT_MAX_MTU );return -EINVAL ; } -if (new_mtu >ETHER_MTU ) { bp->flags |=BNXT_FLAG_JUMBO ; bp->eth_dev->data->dev_conf.rxmode.offloads |=
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 4/15 net/bnxt: update HWRM version
In reply to Ajit KhapardeUpdate the HWRM API to version 1.9.2.53
--v1->v2:
Update from 1.9.2.45 to version 1.9.2.53v2->v3:
Split the patch into smaller patches
--- drivers/net/bnxt/bnxt_stats.c | 12 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 16311 +++++++---------------- 2 files changed, 5029 insertions(+), 11294 deletions(-)
drivers/net/bnxt/bnxt_stats.c +6 -6
@@ -26,8 +26,8 @@ static const struct bnxt_xstats_name_off bnxt_rx_stats_strings[] = { rx_256b_511b_frames)}, {"rx_512b_1023b_frames" , offsetof(struct rx_port_stats , rx_512b_1023b_frames)}, - {"rx_1024b_1518_frames", offsetof(struct rx_port_stats, - rx_1024b_1518_frames)}, + {"rx_1024b_1518b_frames", offsetof(struct rx_port_stats, + rx_1024b_1518b_frames)}, {"rx_good_vlan_frames", offsetof(struct rx_port_stats, rx_good_vlan_frames)}, {"rx_1519b_2047b_frames", offsetof(struct rx_port_stats,
@@ -93,12 +93,12 @@ static const struct bnxt_xstats_name_off bnxt_tx_stats_strings[] = { tx_256b_511b_frames)}, {"tx_512b_1023b_frames" , offsetof(struct tx_port_stats , tx_512b_1023b_frames)}, - {"tx_1024b_1518_frames", offsetof(struct tx_port_stats, - tx_1024b_1518_frames)}, + {"tx_1024b_1518b_frames", offsetof(struct tx_port_stats, + tx_1024b_1518b_frames)}, {"tx_good_vlan_frames", offsetof(struct tx_port_stats, tx_good_vlan_frames)}, - {"tx_1519b_2047_frames", offsetof(struct tx_port_stats, - tx_1519b_2047_frames)}, + {"tx_1519b_2047b_frames", offsetof(struct tx_port_stats, + tx_1519b_2047b_frames)}, {"tx_2048b_4095b_frames", offsetof(struct tx_port_stats, tx_2048b_4095b_frames)}, {"tx_4096b_9216b_frames", offsetof(struct tx_port_stats,
drivers/net/bnxt/hsi_struct_def_dpdk.h +5023 -11288
2,974 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1 (Apple Git-112)
Part of the diff is not shown here. View the raw message.
PATCH v3 5/15 net/bnxt: update HWRM version part 2
In reply to Ajit KhapardeUpdate the HWRM API to version 1.9.2.53
This is second part of the patch.
--v1->v2:
Update from 1.9.2.45 to version 1.9.2.53v2->v3:
Split the patch into smaller patches
--- drivers/net/bnxt/hsi_struct_def_dpdk.h | 1153 ++++++++++++++++++++++++ 1 file changed, 1153 insertions(+)
drivers/net/bnxt/hsi_struct_def_dpdk.h +1153 -0
@@ -17291,6 +17291,261 @@ struct hwrm_ring_reset_output {uint8_t valid; } __attribute__((packed)); +/************************** +* hwrm_ring_aggint_qcaps * +**************************/ + + +/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */ +struct hwrm_ring_aggint_qcaps_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +} __attribute__((packed)); + +/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */ +struct hwrm_ring_aggint_qcaps_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint32_t cmpl_params; +/* +* When this bit is set to '1', int_lat_tmr_min can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \ + UINT32_C(0x1) +/* +* When this bit is set to '1', int_lat_tmr_max can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \ + UINT32_C(0x2) +/* +* When this bit is set to '1', timer_reset can be enabled +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \ + UINT32_C(0x4) +/* +* When this bit is set to '1', ring_idle can be enabled +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \ + UINT32_C(0x8) +/* +* When this bit is set to '1', num_cmpl_dma_aggr can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \ + UINT32_C(0x10) +/* +* When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \ + UINT32_C(0x20) +/* +* When this bit is set to '1', cmpl_aggr_dma_tmr can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \ + UINT32_C(0x40) +/* +* When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \ + UINT32_C(0x80) +/* +* When this bit is set to '1', num_cmpl_aggr_int can be configured +* on completion rings. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \ + UINT32_C(0x100) +uint32_t nq_params; +/* +* When this bit is set to '1', int_lat_tmr_min can be configured +* on notification queues. +*/ +#define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \ + UINT32_C(0x1) +/* Minimum value for num_cmpl_dma_aggr */ +uint16_t num_cmpl_dma_aggr_min; +/* Maximum value for num_cmpl_dma_aggr */ +uint16_t num_cmpl_dma_aggr_max; +/* Minimum value for num_cmpl_dma_aggr_during_int */ +uint16_t num_cmpl_dma_aggr_during_int_min; +/* Maximum value for num_cmpl_dma_aggr_during_int */ +uint16_t num_cmpl_dma_aggr_during_int_max; +/* Minimum value for cmpl_aggr_dma_tmr */ +uint16_t cmpl_aggr_dma_tmr_min; +/* Maximum value for cmpl_aggr_dma_tmr */ +uint16_t cmpl_aggr_dma_tmr_max; +/* Minimum value for cmpl_aggr_dma_tmr_during_int */ +uint16_t cmpl_aggr_dma_tmr_during_int_min; +/* Maximum value for cmpl_aggr_dma_tmr_during_int */ +uint16_t cmpl_aggr_dma_tmr_during_int_max; +/* Minimum value for int_lat_tmr_min */ +uint16_t int_lat_tmr_min_min; +/* Maximum value for int_lat_tmr_min */ +uint16_t int_lat_tmr_min_max; +/* Minimum value for int_lat_tmr_max */ +uint16_t int_lat_tmr_max_min; +/* Maximum value for int_lat_tmr_max */ +uint16_t int_lat_tmr_max_max; +/* Minimum value for num_cmpl_aggr_int */ +uint16_t num_cmpl_aggr_int_min; +/* Maximum value for num_cmpl_aggr_int */ +uint16_t num_cmpl_aggr_int_max; +/* The units for timer parameters, in nanoseconds. */ +uint16_t timer_units; +uint8_t unused_0[1 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/************************************** +* hwrm_ring_cmpl_ring_qaggint_params * +**************************************/ + + +/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */ +struct hwrm_ring_cmpl_ring_qaggint_params_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* Physical number of completion ring. */ +uint16_t ring_id; +uint8_t unused_0[6 ]; +} __attribute__((packed)); + +/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */ +struct hwrm_ring_cmpl_ring_qaggint_params_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint16_t flags; +/* +* When this bit is set to '1', interrupt max +* timer is reset whenever a completion is received. +*/ +#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \ + UINT32_C(0x1) +/* +* When this bit is set to '1', ring idle mode +* aggregation will be enabled. +*/ +#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \ + UINT32_C(0x2) +/* +* Number of completions to aggregate before DMA +* during the normal mode. +*/ +uint16_t num_cmpl_dma_aggr; +/* +* Number of completions to aggregate before DMA +* during the interrupt mode. +*/ +uint16_t num_cmpl_dma_aggr_during_int; +/* +* Timer in unit of 80-nsec used to aggregate completions before +* DMA during the normal mode (not in interrupt mode). +*/ +uint16_t cmpl_aggr_dma_tmr; +/* +* Timer in unit of 80-nsec used to aggregate completions before +* DMA during the interrupt mode. +*/ +uint16_t cmpl_aggr_dma_tmr_during_int; +/* Minimum time (in unit of 80-nsec) between two interrupts. */ +uint16_t int_lat_tmr_min; +/* +* Maximum wait time (in unit of 80-nsec) spent aggregating +* completions before signaling the interrupt after the +* interrupt is enabled. +*/ +uint16_t int_lat_tmr_max; +/* +* Minimum number of completions aggregated before signaling +* an interrupt. +*/ +uint16_t num_cmpl_aggr_int; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); +/***************************************** * hwrm_ring_cmpl_ring_cfg_aggint_params * *****************************************/
@@ -18534,6 +18789,904 @@ struct hwrm_cfa_vlan_antispoof_qcfg_output {uint8_t valid; } __attribute__((packed)); +/******************************** +* hwrm_cfa_tunnel_filter_alloc * +********************************/ + + +/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */ +struct hwrm_cfa_tunnel_filter_alloc_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +uint32_t flags; +/* Setting of this flag indicates the applicability to the loopback path. */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x1) +uint32_t enables; +/* +* This bit must be '1' for the l2_filter_id field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ + UINT32_C(0x1) +/* +* This bit must be '1' for the l2_addr field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ + UINT32_C(0x2) +/* +* This bit must be '1' for the l2_ivlan field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ + UINT32_C(0x4) +/* +* This bit must be '1' for the l3_addr field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \ + UINT32_C(0x8) +/* +* This bit must be '1' for the l3_addr_type field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \ + UINT32_C(0x10) +/* +* This bit must be '1' for the t_l3_addr_type field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \ + UINT32_C(0x20) +/* +* This bit must be '1' for the t_l3_addr field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \ + UINT32_C(0x40) +/* +* This bit must be '1' for the tunnel_type field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ + UINT32_C(0x80) +/* +* This bit must be '1' for the vni field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \ + UINT32_C(0x100) +/* +* This bit must be '1' for the dst_vnic_id field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \ + UINT32_C(0x200) +/* +* This bit must be '1' for the mirror_vnic_id field to be +* configured. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ + UINT32_C(0x400) +/* +* This value identifies a set of CFA data structures used for an L2 +* context. +*/ +uint64_t l2_filter_id; +/* +* This value sets the match value for the inner L2 +* MAC address. +* Destination MAC address for RX path. +* Source MAC address for TX path. +*/ +uint8_t l2_addr[6 ]; +/* +* This value sets VLAN ID value for inner VLAN. +* Only 12-bits of VLAN ID are used in setting the filter. +*/ +uint16_t l2_ivlan; +/* +* The value of inner destination IP address to be used in filtering. +* For IPv4, first four bytes represent the IP address. +*/ +uint32_t l3_addr[4 ]; +/* +* The value of tunnel destination IP address to be used in filtering. +* For IPv4, first four bytes represent the IP address. +*/ +uint32_t t_l3_addr[4 ]; +/* +* This value indicates the type of inner IP address. +* 4 - IPv4 +* 6 - IPv6 +* All others are invalid. +*/ +uint8_t l3_addr_type; +/* +* This value indicates the type of tunnel IP address. +* 4 - IPv4 +* 6 - IPv6 +* All others are invalid. +*/ +uint8_t t_l3_addr_type; +/* Tunnel Type. */ +uint8_t tunnel_type; +/* Non-tunnel */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) +/* Virtual eXtensible Local Area Network (VXLAN) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) +/* Network Virtualization Generic Routing Encapsulation (NVGRE) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) +/* Generic Routing Encapsulation (GRE) inside Ethernet payload */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) +/* IP in IP */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) +/* Generic Network Virtualization Encapsulation (Geneve) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) +/* Multi-Protocol Lable Switching (MPLS) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) +/* Stateless Transport Tunnel (STT) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) +/* Generic Routing Encapsulation (GRE) inside IP datagram payload */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) +/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) +/* Any tunneled traffic */ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL +/* +* tunnel_flags allows the user to indicate the tunnel tag detection +* for the tunnel type specified in tunnel_type. +*/ +uint8_t tunnel_flags; +/* +* If the tunnel_type is geneve, then this bit indicates if we +* need to match the geneve OAM packet. +* If the tunnel_type is nvgre or gre, then this bit indicates if +* we need to detect checksum present bit in geneve header. +* If the tunnel_type is mpls, then this bit indicates if we need +* to match mpls packet with explicit IPV4/IPV6 null header. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \ + UINT32_C(0x1) +/* +* If the tunnel_type is geneve, then this bit indicates if we +* need to detect the critical option bit set in the oam packet. +* If the tunnel_type is nvgre or gre, then this bit indicates +* if we need to match nvgre packets with key present bit set in +* gre header. +* If the tunnel_type is mpls, then this bit indicates if we +* need to match mpls packet with S bit from inner/second label. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \ + UINT32_C(0x2) +/* +* If the tunnel_type is geneve, then this bit indicates if we +* need to match geneve packet with extended header bit set in +* geneve header. +* If the tunnel_type is nvgre or gre, then this bit indicates +* if we need to match nvgre packets with sequence number +* present bit set in gre header. +* If the tunnel_type is mpls, then this bit indicates if we +* need to match mpls packet with S bit from out/first label. +*/ +#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \ + UINT32_C(0x4) +/* +* Virtual Network Identifier (VNI). Only valid with +* tunnel_types VXLAN, NVGRE, and Geneve. +* Only lower 24-bits of VNI field are used +* in setting up the filter. +*/ +uint32_t vni; +/* Logical VNIC ID of the destination VNIC. */ +uint32_t dst_vnic_id; +/* +* Logical VNIC ID of the VNIC where traffic is +* mirrored. +*/ +uint32_t mirror_vnic_id; +} __attribute__((packed)); + +/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */ +struct hwrm_cfa_tunnel_filter_alloc_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +/* This value is an opaque id into CFA data structures. */ +uint64_t tunnel_filter_id; +/* +* This is the ID of the flow associated with this +* filter. +* This value shall be used to match and associate the +* flow identifier returned in completion records. +* A value of 0xFFFFFFFF shall indicate no flow id. +*/ +uint32_t flow_id; +uint8_t unused_0[3 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/******************************* +* hwrm_cfa_tunnel_filter_free * +*******************************/ + + +/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_tunnel_filter_free_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* This value is an opaque id into CFA data structures. */ +uint64_t tunnel_filter_id; +} __attribute__((packed)); + +/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */ +struct hwrm_cfa_tunnel_filter_free_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/*************************************** +* hwrm_cfa_redirect_tunnel_type_alloc * +***************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_alloc_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* The destination function id, to whom the traffic is redirected. */ +uint16_t dest_fid; +/* Tunnel Type. */ +uint8_t tunnel_type; +/* Non-tunnel */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) +/* Virtual eXtensible Local Area Network (VXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) +/* Network Virtualization Generic Routing Encapsulation (NVGRE) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) +/* Generic Routing Encapsulation (GRE) inside Ethernet payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) +/* IP in IP */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) +/* Generic Network Virtualization Encapsulation (Geneve) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) +/* Multi-Protocol Lable Switching (MPLS) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) +/* Stateless Transport Tunnel (STT) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) +/* Generic Routing Encapsulation (GRE) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) +/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) +/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) +/* Any tunneled traffic */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL +/* Tunnel alloc flags. */ +uint8_t flags; +/* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \ + UINT32_C(0x1) +uint8_t unused_0[4 ]; +} __attribute__((packed)); + +/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_alloc_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/************************************** +* hwrm_cfa_redirect_tunnel_type_free * +**************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_free_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* The destination function id, to whom the traffic is redirected. */ +uint16_t dest_fid; +/* Tunnel Type. */ +uint8_t tunnel_type; +/* Non-tunnel */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) +/* Virtual eXtensible Local Area Network (VXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) +/* Network Virtualization Generic Routing Encapsulation (NVGRE) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) +/* Generic Routing Encapsulation (GRE) inside Ethernet payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) +/* IP in IP */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) +/* Generic Network Virtualization Encapsulation (Geneve) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) +/* Multi-Protocol Lable Switching (MPLS) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) +/* Stateless Transport Tunnel (STT) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) +/* Generic Routing Encapsulation (GRE) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) +/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) +/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) +/* Any tunneled traffic */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL +uint8_t unused_0[5 ]; +} __attribute__((packed)); + +/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_free_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/************************************** +* hwrm_cfa_redirect_tunnel_type_info * +**************************************/ + + +/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */ +struct hwrm_cfa_redirect_tunnel_type_info_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* The source function id. */ +uint16_t src_fid; +/* Tunnel Type. */ +uint8_t tunnel_type; +/* Non-tunnel */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) +/* Virtual eXtensible Local Area Network (VXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) +/* Network Virtualization Generic Routing Encapsulation (NVGRE) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) +/* Generic Routing Encapsulation (GRE) inside Ethernet payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) +/* IP in IP */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) +/* Generic Network Virtualization Encapsulation (Geneve) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) +/* Multi-Protocol Lable Switching (MPLS) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) +/* Stateless Transport Tunnel (STT) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \ + UINT32_C(0x7) +/* Generic Routing Encapsulation (GRE) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) +/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) +/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) +/* Any tunneled traffic */ +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) +#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \ + HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL +uint8_t unused_0[5 ]; +} __attribute__((packed)); + +/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */ +struct hwrm_cfa_redirect_tunnel_type_info_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +/* The destination function id, to whom the traffic is redirected. */ +uint16_t dest_fid; +uint8_t unused_0[5 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */ +struct hwrm_vxlan_ipv4_hdr { +/* IPv4 version and header length. */ +uint8_t ver_hlen; +/* IPv4 header length */ +#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf) +#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0 +/* Version */ +#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0) +#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4 +/* IPv4 type of service. */ +uint8_t tos; +/* IPv4 identification. */ +uint16_t ip_id; +/* IPv4 flags and offset. */ +uint16_t flags_frag_offset; +/* IPv4 TTL. */ +uint8_t ttl; +/* IPv4 protocol. */ +uint8_t protocol; +/* IPv4 source address. */ +uint32_t src_ip_addr; +/* IPv4 destination address. */ +uint32_t dest_ip_addr; +} __attribute__((packed)); + +/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */ +struct hwrm_vxlan_ipv6_hdr { +/* IPv6 version, traffic class and flow label. */ +uint32_t ver_tc_flow_label; +/* IPv6 version shift */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \ + UINT32_C(0x1c) +/* IPv6 version mask */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \ + UINT32_C(0xf0000000) +/* IPv6 TC shift */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \ + UINT32_C(0x14) +/* IPv6 TC mask */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \ + UINT32_C(0xff00000) +/* IPv6 flow label shift */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \ + UINT32_C(0x0) +/* IPv6 flow label mask */ +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \ + UINT32_C(0xfffff) +#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \ + HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK +/* IPv6 payload length. */ +uint16_t payload_len; +/* IPv6 next header. */ +uint8_t next_hdr; +/* IPv6 TTL. */ +uint8_t ttl; +/* IPv6 source address. */ +uint32_t src_ip_addr[4 ]; +/* IPv6 destination address. */ +uint32_t dest_ip_addr[4 ]; +} __attribute__((packed)); + +/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */ +struct hwrm_cfa_encap_data_vxlan { +/* Source MAC address. */ +uint8_t src_mac_addr[6 ]; +/* reserved. */ +uint16_t unused_0; +/* Destination MAC address. */ +uint8_t dst_mac_addr[6 ]; +/* Number of VLAN tags. */ +uint8_t num_vlan_tags; +/* reserved. */ +uint8_t unused_1; +/* Outer VLAN TPID. */ +uint16_t ovlan_tpid; +/* Outer VLAN TCI. */ +uint16_t ovlan_tci; +/* Inner VLAN TPID. */ +uint16_t ivlan_tpid; +/* Inner VLAN TCI. */ +uint16_t ivlan_tci; +/* L3 header fields. */ +uint32_t l3[10 ]; +/* IP version mask. */ +#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf) +/* IP version 4. */ +#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4) +/* IP version 6. */ +#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6) +#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \ + HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 +/* UDP source port. */ +uint16_t src_port; +/* UDP destination port. */ +uint16_t dst_port; +/* VXLAN Network Identifier. */ +uint32_t vni; +/* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */ +uint8_t hdr_rsvd0[3 ]; +/* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */ +uint8_t hdr_rsvd1; +/* VXLAN header flags field. */ +uint8_t hdr_flags; +uint8_t unused[3 ]; +} __attribute__((packed)); + +/******************************* +* hwrm_cfa_encap_record_alloc * +*******************************/ + + +/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */ +struct hwrm_cfa_encap_record_alloc_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +uint32_t flags; +/* Setting of this flag indicates the applicability to the loopback path. */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \ + UINT32_C(0x1) +/* Encapsulation Type. */ +uint8_t encap_type; +/* Virtual eXtensible Local Area Network (VXLAN) */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \ + UINT32_C(0x1) +/* Network Virtualization Generic Routing Encapsulation (NVGRE) */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \ + UINT32_C(0x2) +/* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \ + UINT32_C(0x3) +/* IP in IP */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \ + UINT32_C(0x4) +/* Generic Network Virtualization Encapsulation (Geneve) */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \ + UINT32_C(0x5) +/* Multi-Protocol Lable Switching (MPLS) */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \ + UINT32_C(0x6) +/* VLAN */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \ + UINT32_C(0x7) +/* Generic Routing Encapsulation (GRE) inside IP datagram payload */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \ + UINT32_C(0x8) +/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \ + UINT32_C(0x9) +#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \ + HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 +uint8_t unused_0[3 ]; +/* This value is encap data used for the given encap type. */ +uint32_t encap_data[20 ]; +} __attribute__((packed)); + +/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */ +struct hwrm_cfa_encap_record_alloc_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +/* This value is an opaque id into CFA data structures. */ +uint32_t encap_record_id; +uint8_t unused_0[3 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/****************************** +* hwrm_cfa_encap_record_free * +******************************/ + + +/* hwrm_cfa_encap_record_free_input (size:192b/24B) */ +struct hwrm_cfa_encap_record_free_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +/* This value is an opaque id into CFA data structures. */ +uint32_t encap_record_id; +uint8_t unused_0[4 ]; +} __attribute__((packed)); + +/* hwrm_cfa_encap_record_free_output (size:128b/16B) */ +struct hwrm_cfa_encap_record_free_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); +/******************************** * hwrm_cfa_ntuple_filter_alloc * ********************************/
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 6/15 net/bnxt: update HWRM version part 3
In reply to Ajit KhapardeUpdate the HWRM API to version 1.9.2.53
This is part 3 of the patch.
--v1->v2:
Update from 1.9.2.45 to version 1.9.2.53v2->v3:
Split the patch into smaller patches
--- drivers/net/bnxt/hsi_struct_def_dpdk.h | 18025 ++++++++++++++--------- 1 file changed, 11094 insertions(+), 6931 deletions(-)
drivers/net/bnxt/hsi_struct_def_dpdk.h +11094 -6931
@@ -3574,6 +3574,56 @@ struct hwrm_async_event_cmpl_link_status_change { 20 } __attribute__((packed)); +/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_mtu_change { +uint16_t type; +/* +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* Link MTU changed */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \ + UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* The new MTU of the link in bytes. */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0 +} __attribute__((packed)); +/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_speed_change {uint16_t type;
@@ -3669,6 +3719,216 @@ struct hwrm_async_event_cmpl_link_speed_change { 16 } __attribute__((packed)); +/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_dcb_config_change { +uint16_t type; +/* +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* DCB Configuration changed */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \ + UINT32_C(0x3) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE +/* Event specific data */ +uint32_t event_data2; +/* ETS configuration change */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \ + UINT32_C(0x1) +/* PFC configuration change */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \ + UINT32_C(0x2) +/* APP configuration change */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \ + UINT32_C(0x4) +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* PORT ID */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 0 +/* Priority recommended for RoCE traffic */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \ + UINT32_C(0xff0000) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \ + 16 +/* none is 255 */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \ + (UINT32_C(0xff) << 16) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE +/* Priority recommended for L2 traffic */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \ + UINT32_C(0xff000000) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \ + 24 +/* none is 255 */ +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \ + (UINT32_C(0xff) << 24) +#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */ +struct hwrm_async_event_cmpl_port_conn_not_allowed { +uint16_t type; +/* +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \ + 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* Port connection not allowed */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \ + UINT32_C(0x4) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* PORT ID */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ + 0 +/* +* This value indicates the current port level enforcement policy +* for the optics module when there is an optical module mismatch +* and port is not connected. +*/ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \ + UINT32_C(0xff0000) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \ + 16 +/* No enforcement */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \ + (UINT32_C(0x0) << 16) +/* Disable Transmit side Laser. */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \ + (UINT32_C(0x1) << 16) +/* Raise a warning message. */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \ + (UINT32_C(0x2) << 16) +/* Power down the module. */ +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \ + (UINT32_C(0x3) << 16) +#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \ + HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */ +struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { +uint16_t type; +/* +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \ + 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* Link speed configuration was not allowed */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ + UINT32_C(0x5) +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* PORT ID */ +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ + 0 +} __attribute__((packed)); +/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_speed_cfg_change {uint16_t type;
@@ -3814,8 +4074,8 @@ struct hwrm_async_event_cmpl_port_phy_cfg_change { UINT32_C(0x40000) } __attribute__((packed)); -/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */ -struct hwrm_async_event_cmpl_pf_drvr_unload { +/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */ +struct hwrm_async_event_cmpl_reset_notify {uint16_t type;/* * This field indicates the exact type of the completion.
@@ -3824,21 +4084,21 @@ struct hwrm_async_event_cmpl_pf_drvr_unload {* records. Odd values indicate 32B * records. */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \ UINT32_C(0x3f) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0 +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_SFT 0/* HWRM Asynchronous Event Information */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT/* Identifiers of events. */ uint16_t event_id; -/* PF driver unloaded */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \ - UINT32_C(0x20) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD +/* Notify clients of imminent reset. */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY \ + UINT32_C(0x8) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY/* Event specific data */ uint32_t event_data2;uint8_t opaque_v;
@@ -3847,28 +4107,65 @@ struct hwrm_async_event_cmpl_pf_drvr_unload {* for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1)/* opaque is 7 b */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1 +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_SFT 1/* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo;/* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi;/* Event specific data */ uint32_t event_data1; -/* PF ID */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ - UINT32_C(0xffff) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0 -/* Indicates the physical port this pf belongs to */ -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \ - UINT32_C(0x70000) -#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16 +/* Indicates driver action requested */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_MASK \ + UINT32_C(0xff) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_SFT \ + 0 +/* +* If set to 1, it indicates that the l2 client should +* stop sending in band traffic to Nitro. +* if set to 0, there is no change in L2 client behavior. +*/ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_STOP_TX_QUEUE \ + UINT32_C(0x1) +/* +* If set to 1, it indicates that the L2 client should +* bring down the interface. +* If set to 0, then there is no change in L2 client behavior. +*/ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN \ + UINT32_C(0x2) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN +/* Indicates reason for reset. */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MASK \ + UINT32_C(0xff00) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_SFT \ + 8 +/* A management client has requested reset. */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MANAGEMENT_RESET_REQUEST \ + (UINT32_C(0x1) << 8) +/* A fatal firmware exception has occurred. */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_FATAL \ + (UINT32_C(0x2) << 8) +/* A non-fatal firmware exception has occurred. */ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL \ + (UINT32_C(0x3) << 8) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_LAST \ + HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL +/* +* Minimum time before driver should attempt access - units 100ms ticks. +* Range 0-65535 +*/ +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_MASK \ + UINT32_C(0xffff0000) +#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \ + 16 } __attribute__((packed)); -/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */ -struct hwrm_async_event_cmpl_vf_cfg_change { +/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_drvr_unload {uint16_t type;/* * This field indicates the exact type of the completion.
@@ -3877,21 +4174,21 @@ struct hwrm_async_event_cmpl_vf_cfg_change {* records. Odd values indicate 32B * records. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \ UINT32_C(0x3f) -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0 +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0/* HWRM Asynchronous Event Information */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT/* Identifiers of events. */ uint16_t event_id; -/* VF Configuration Change */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \ - UINT32_C(0x33) -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE +/* Function driver unloaded */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \ + UINT32_C(0x10) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD/* Event specific data */ uint32_t event_data2;uint8_t opaque_v;
@@ -3900,60 +4197,128 @@ struct hwrm_async_event_cmpl_vf_cfg_change {* for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1)/* opaque is 7 b */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1 +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1/* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo;/* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; -/* -* Each flag provided in this field indicates a specific VF -* configuration change. At least one of these flags shall be set to 1 -* when an asynchronous event completion of this type is provided -* by the HWRM. -*/ +/* Event specific data */ uint32_t event_data1; +/* Function ID */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \ + 0 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_drvr_load { +uint16_t type;/* -* If this bit is set to 1, then the value of MTU -* was changed on this VF. -* If set to 0, then this bit should be ignored. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \ - UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* Function driver loaded */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \ + UINT32_C(0x11) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* If this bit is set to 1, then the value of MRU -* was changed on this VF. -* If set to 0, then this bit should be ignored. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \ - UINT32_C(0x2) -/* -* If this bit is set to 1, then the value of default MAC -* address was changed on this VF. -* If set to 0, then this bit should be ignored. -*/ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \ - UINT32_C(0x4) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* Function ID */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */ +struct hwrm_async_event_cmpl_func_flr_proc_cmplt { +uint16_t type;/* -* If this bit is set to 1, then the value of default VLAN -* was changed on this VF. -* If set to 0, then this bit should be ignored. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \ - UINT32_C(0x8) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \ + 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* Function FLR related processing has completed */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \ + UINT32_C(0x12) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* If this bit is set to 1, then the value of trusted VF enable -* was changed on this VF. -* If set to 0, then this bit should be ignored. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \ - UINT32_C(0x10) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* Function ID */ +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \ + 0 } __attribute__((packed)); -/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ -struct hwrm_async_event_cmpl_hwrm_error { +/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_drvr_unload {uint16_t type;/* * This field indicates the exact type of the completion.
@@ -3962,289 +4327,655 @@ struct hwrm_async_event_cmpl_hwrm_error {* records. Odd values indicate 32B * records. */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ UINT32_C(0x3f) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0/* HWRM Asynchronous Event Information */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT/* Identifiers of events. */ uint16_t event_id; -/* HWRM Error */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ - UINT32_C(0xff) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR +/* PF driver unloaded */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \ + UINT32_C(0x20) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD/* Event specific data */ uint32_t event_data2; -/* Severity of HWRM Error */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ - UINT32_C(0xff) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 -/* Warning */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ - UINT32_C(0x0) -/* Non-fatal Error */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ - UINT32_C(0x1) -/* Fatal Error */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ - UINT32_C(0x2) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATALuint8_t opaque_v;/* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1)/* opaque is 7 b */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1/* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo;/* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi;/* Event specific data */ uint32_t event_data1; -/* Time stamp for error event */ -#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ - UINT32_C(0x1) +/* PF ID */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0 +/* Indicates the physical port this pf belongs to */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x70000) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16 } __attribute__((packed)); -/******************* -* hwrm_func_reset * -*******************/ - - -/* hwrm_func_reset_input (size:192b/24B) */ -struct hwrm_func_reset_input { -/* The HWRM command request type. */ -uint16_t req_type; -/* -* The completion ring to send the completion event on. This should -* be the NQ ID returned from the `nq_alloc` HWRM command. -*/ -uint16_t cmpl_ring; +/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_drvr_load { +uint16_t type;/* -* The sequence ID is used by the driver for tracking multiple -* commands. This ID is treated as opaque data by the firmware and -* the value is returned in the `hwrm_resp_hdr` upon completion. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint16_t seq_id; +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* PF driver loaded */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \ + UINT32_C(0x21) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* The target ID of the command: -* * 0x0-0xFFF8 - The function ID -* * 0xFFF8-0xFFFE - Reserved for internal processors -* * 0xFFFF - HWRM +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -uint16_t target_id; +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* PF ID */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 +/* Indicates the physical port this pf belongs to */ +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x70000) +#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_flr { +uint16_t type;/* -* A physical address pointer pointing to a host buffer that the -* command's response data will be written. This can be either a host -* physical address (HPA) or a guest physical address (GPA) and must -* point to a physically contiguous block of memory. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint64_t resp_addr; -uint32_t enables; +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* VF Function Level Reset (FLR) */ +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* This bit must be '1' for the vf_id_valid field to be -* configured. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* VF ID */ +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0 +/* Indicates the physical function this event occured on. */ +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \ + UINT32_C(0xff0000) +#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_mac_addr_change { +uint16_t type;/* -* The ID of the VF that this PF is trying to reset. -* Only the parent PF shall be allowed to reset a child VF. -* -* A parent PF driver shall use this field only when a specific child VF -* is requested to be reset. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint16_t vf_id; -/* This value indicates the level of a function reset. */ -uint8_t func_reset_level; +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* VF MAC Address Change */ +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \ + UINT32_C(0x31) +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* Reset the caller function and its children VFs (if any). If no -* children functions exist, then reset the caller function only. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ - UINT32_C(0x0) -/* Reset the caller function only */ -#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \ UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* VF ID */ +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0xffff) +#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \ + 0 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_pf_vf_comm_status_change { +uint16_t type;/* -* Reset all children VFs of the caller function driver if the -* caller is a PF driver. -* It is an error to specify this level by a VF driver. -* It is an error to specify this level by a PF driver with -* no children VFs. -*/ -#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ - UINT32_C(0x2) +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \ + 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* PF-VF communication channel status change. */ +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ + UINT32_C(0x32) +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* Reset a specific VF of the caller function driver if the caller -* is the parent PF driver. -* It is an error to specify this level by a VF driver. -* It is an error to specify this level by a PF driver that is not -* the parent of the VF that is being requested to reset. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ - UINT32_C(0x3) -#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \ - HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF -uint8_t unused_0; -} __attribute__((packed)); - -/* hwrm_func_reset_output (size:128b/16B) */ -struct hwrm_func_reset_output { -/* The specific error status for the command. */ -uint16_t error_code; -/* The HWRM command request type. */ -uint16_t req_type; -/* The sequence ID from the original command. */ -uint16_t seq_id; -/* The length of the response data in number of bytes. */ -uint16_t resp_len; -uint8_t unused_0[7 ]; +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1;/* -* This field is used in Output records to indicate that the output -* is completely written to RAM. This field should be read as '1' -* to indicate that the output has been completely written. -* When writing a command completion or response to an internal processor, -* the order of writes has to be such that this field is written last. +* If this bit is set to 1, then it indicates that the PF-VF +* communication was lost and it is established. +* If this bit set to 0, then it indicates that the PF-VF +* communication was established and it is lost. */ -uint8_t valid; +#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \ + UINT32_C(0x1) } __attribute__((packed)); -/******************** -* hwrm_func_getfid * -********************/ - - -/* hwrm_func_getfid_input (size:192b/24B) */ -struct hwrm_func_getfid_input { -/* The HWRM command request type. */ -uint16_t req_type; +/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_vf_cfg_change { +uint16_t type;/* -* The completion ring to send the completion event on. This should -* be the NQ ID returned from the `nq_alloc` HWRM command. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint16_t cmpl_ring; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* VF Configuration Change */ +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \ + UINT32_C(0x33) +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* The sequence ID is used by the driver for tracking multiple -* commands. This ID is treated as opaque data by the firmware and -* the value is returned in the `hwrm_resp_hdr` upon completion. +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -uint16_t seq_id; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi;/* -* The target ID of the command: -* * 0x0-0xFFF8 - The function ID -* * 0xFFF8-0xFFFE - Reserved for internal processors -* * 0xFFFF - HWRM +* Each flag provided in this field indicates a specific VF +* configuration change. At least one of these flags shall be set to 1 +* when an asynchronous event completion of this type is provided +* by the HWRM. */ -uint16_t target_id; +uint32_t event_data1;/* -* A physical address pointer pointing to a host buffer that the -* command's response data will be written. This can be either a host -* physical address (HPA) or a guest physical address (GPA) and must -* point to a physically contiguous block of memory. +* If this bit is set to 1, then the value of MTU +* was changed on this VF. +* If set to 0, then this bit should be ignored. */ -uint64_t resp_addr; -uint32_t enables; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \ + UINT32_C(0x1)/* -* This bit must be '1' for the pci_id field to be -* configured. +* If this bit is set to 1, then the value of MRU +* was changed on this VF. +* If set to 0, then this bit should be ignored. */ -#define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \ + UINT32_C(0x2)/* -* This value is the PCI ID of the queried function. -* If ARI is enabled, then it is -* Bus Number (8b):Function Number(8b). Otherwise, it is -* Bus Number (8b):Device Number (5b):Function Number(3b). +* If this bit is set to 1, then the value of default MAC +* address was changed on this VF. +* If set to 0, then this bit should be ignored. */ -uint16_t pci_id; -uint8_t unused_0[2 ]; -} __attribute__((packed)); - -/* hwrm_func_getfid_output (size:128b/16B) */ -struct hwrm_func_getfid_output { -/* The specific error status for the command. */ -uint16_t error_code; -/* The HWRM command request type. */ -uint16_t req_type; -/* The sequence ID from the original command. */ -uint16_t seq_id; -/* The length of the response data in number of bytes. */ -uint16_t resp_len; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \ + UINT32_C(0x4)/* -* FID value. This value is used to identify operations on the PCI -* bus as belonging to a particular PCI function. +* If this bit is set to 1, then the value of default VLAN +* was changed on this VF. +* If set to 0, then this bit should be ignored. */ -uint16_t fid; -uint8_t unused_0[5 ]; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \ + UINT32_C(0x8)/* -* This field is used in Output records to indicate that the output -* is completely written to RAM. This field should be read as '1' -* to indicate that the output has been completely written. -* When writing a command completion or response to an internal processor, -* the order of writes has to be such that this field is written last. +* If this bit is set to 1, then the value of trusted VF enable +* was changed on this VF. +* If set to 0, then this bit should be ignored. */ -uint8_t valid; +#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \ + UINT32_C(0x10) } __attribute__((packed)); -/********************** -* hwrm_func_vf_alloc * -**********************/ - - -/* hwrm_func_vf_alloc_input (size:192b/24B) */ -struct hwrm_func_vf_alloc_input { -/* The HWRM command request type. */ -uint16_t req_type; -/* -* The completion ring to send the completion event on. This should -* be the NQ ID returned from the `nq_alloc` HWRM command. -*/ -uint16_t cmpl_ring; +/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_llfc_pfc_change { +uint16_t type;/* -* The sequence ID is used by the driver for tracking multiple -* commands. This ID is treated as opaque data by the firmware and -* the value is returned in the `hwrm_resp_hdr` upon completion. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint16_t seq_id; +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* unused1 is 10 b */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \ + UINT32_C(0xffc0) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT 6 +/* Identifiers of events. */ +uint16_t event_id; +/* LLFC/PFC Configuration Change */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \ + UINT32_C(0x34) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v;/* -* The target ID of the command: -* * 0x0-0xFFF8 - The function ID -* * 0xFFF8-0xFFFE - Reserved for internal processors -* * 0xFFFF - HWRM +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. */ -uint16_t target_id; +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* Indicates llfc pfc status change */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \ + UINT32_C(0x3) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \ + 0/* -* A physical address pointer pointing to a host buffer that the -* command's response data will be written. This can be either a host -* physical address (HPA) or a guest physical address (GPA) and must -* point to a physically contiguous block of memory. +* If this field set to 1, then it indicates that llfc is +* enabled. */ -uint64_t resp_addr; -uint32_t enables; +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \ + UINT32_C(0x1)/* -* This bit must be '1' for the first_vf_id field to be -* configured. +* If this field is set to 2, then it indicates that pfc +* is enabled. */ -#define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \ + UINT32_C(0x2) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \ + HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC +/* Indicates the physical port this llfc pfc change occur */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \ + UINT32_C(0x1c) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \ + 2 +/* PORT ID */ +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \ + UINT32_C(0x1fffe0) +#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \ + 5 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_default_vnic_change { +uint16_t type;/* -* This value is used to identify a Virtual Function (VF). -* The scope of VF ID is local within a PF. +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. */ -uint16_t first_vf_id; -/* The number of virtual functions requested. */ -uint16_t num_vfs; +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \ + 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT +/* unused1 is 10 b */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \ + UINT32_C(0xffc0) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \ + 6 +/* Identifiers of events. */ +uint16_t event_id; +/* Notification of a default vnic allocaiton or free */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \ + UINT32_C(0x35) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION +/* Event specific data */ +uint32_t event_data2; +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \ + UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* Indicates default vnic configuration change */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \ + UINT32_C(0x3) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \ + 0 +/* +* If this field is set to 1, then it indicates that +* a default VNIC has been allocate. +*/ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \ + UINT32_C(0x1) +/* +* If this field is set to 2, then it indicates that +* a default VNIC has been freed. +*/ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \ + UINT32_C(0x2) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \ + HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE +/* Indicates the physical function this event occured on. */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \ + UINT32_C(0x3fc) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \ + 2 +/* Indicates the virtual function this event occured on */ +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \ + UINT32_C(0x3fffc00) +#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \ + 10 } __attribute__((packed)); -/* hwrm_func_vf_alloc_output (size:128b/16B) */ -struct hwrm_func_vf_alloc_output { +/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ +struct hwrm_async_event_cmpl_hwrm_error { +uint16_t type; +/* +* This field indicates the exact type of the completion. +* By convention, the LSB identifies the length of the +* record in 16B units. Even values indicate 16B +* records. Odd values indicate 32B +* records. +*/ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ + UINT32_C(0x3f) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 +/* HWRM Asynchronous Event Information */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT +/* Identifiers of events. */ +uint16_t event_id; +/* HWRM Error */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ + UINT32_C(0xff) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR +/* Event specific data */ +uint32_t event_data2; +/* Severity of HWRM Error */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ + UINT32_C(0xff) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 +/* Warning */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ + UINT32_C(0x0) +/* Non-fatal Error */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ + UINT32_C(0x1) +/* Fatal Error */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ + UINT32_C(0x2) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL +uint8_t opaque_v; +/* +* This value is written by the NIC such that it will be different +* for each pass through the completion queue. The even passes +* will write 1. The odd passes will write 0. +*/ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) +/* opaque is 7 b */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 +/* 8-lsb timestamp from POR (100-msec resolution) */ +uint8_t timestamp_lo; +/* 16-lsb timestamp from POR (100-msec resolution) */ +uint16_t timestamp_hi; +/* Event specific data */ +uint32_t event_data1; +/* Time stamp for error event */ +#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ + UINT32_C(0x1) +} __attribute__((packed)); + +/******************* +* hwrm_func_reset * +*******************/ + + +/* hwrm_func_reset_input (size:192b/24B) */ +struct hwrm_func_reset_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +uint32_t enables; +/* +* This bit must be '1' for the vf_id_valid field to be +* configured. +*/ +#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) +/* +* The ID of the VF that this PF is trying to reset. +* Only the parent PF shall be allowed to reset a child VF. +* +* A parent PF driver shall use this field only when a specific child VF +* is requested to be reset. +*/ +uint16_t vf_id; +/* This value indicates the level of a function reset. */ +uint8_t func_reset_level; +/* +* Reset the caller function and its children VFs (if any). If no +* children functions exist, then reset the caller function only. +*/ +#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ + UINT32_C(0x0) +/* Reset the caller function only */ +#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ + UINT32_C(0x1) +/* +* Reset all children VFs of the caller function driver if the +* caller is a PF driver. +* It is an error to specify this level by a VF driver. +* It is an error to specify this level by a PF driver with +* no children VFs. +*/ +#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ + UINT32_C(0x2) +/* +* Reset a specific VF of the caller function driver if the caller +* is the parent PF driver. +* It is an error to specify this level by a VF driver. +* It is an error to specify this level by a PF driver that is not +* the parent of the VF that is being requested to reset. +*/ +#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ + UINT32_C(0x3) +#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \ + HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF +uint8_t unused_0; +} __attribute__((packed)); + +/* hwrm_func_reset_output (size:128b/16B) */ +struct hwrm_func_reset_output {/* The specific error status for the command. */ uint16_t error_code;/* The HWRM command request type. */
@@ -4253,9 +4984,7 @@ struct hwrm_func_vf_alloc_output {uint16_t seq_id;/* The length of the response data in number of bytes. */ uint16_t resp_len; -/* The ID of the first VF allocated. */ -uint16_t first_vf_id; -uint8_t unused_0[5 ]; +uint8_t unused_0[7 ];/* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1'
@@ -4266,13 +4995,13 @@ struct hwrm_func_vf_alloc_output {uint8_t valid; } __attribute__((packed)); -/********************* -* hwrm_func_vf_free * -*********************/ +/******************** +* hwrm_func_getfid * +********************/ -/* hwrm_func_vf_free_input (size:192b/24B) */ -struct hwrm_func_vf_free_input { +/* hwrm_func_getfid_input (size:192b/24B) */ +struct hwrm_func_getfid_input {/* The HWRM command request type. */ uint16_t req_type;/*
@@ -4302,24 +5031,22 @@ struct hwrm_func_vf_free_input {uint64_t resp_addr;uint32_t enables;/* -* This bit must be '1' for the first_vf_id field to be +* This bit must be '1' for the pci_id field to be * configured. */ -#define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) -/* -* This value is used to identify a Virtual Function (VF). -* The scope of VF ID is local within a PF. -*/ -uint16_t first_vf_id; +#define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1)/* -* The number of virtual functions requested. -* 0xFFFF - Cleanup all children of this PF. +* This value is the PCI ID of the queried function. +* If ARI is enabled, then it is +* Bus Number (8b):Function Number(8b). Otherwise, it is +* Bus Number (8b):Device Number (5b):Function Number(3b). */ -uint16_t num_vfs; +uint16_t pci_id; +uint8_t unused_0[2 ]; } __attribute__((packed)); -/* hwrm_func_vf_free_output (size:128b/16B) */ -struct hwrm_func_vf_free_output { +/* hwrm_func_getfid_output (size:128b/16B) */ +struct hwrm_func_getfid_output {/* The specific error status for the command. */ uint16_t error_code;/* The HWRM command request type. */
@@ -4328,7 +5055,12 @@ struct hwrm_func_vf_free_output {uint16_t seq_id;/* The length of the response data in number of bytes. */ uint16_t resp_len; -uint8_t unused_0[7 ]; +/* +* FID value. This value is used to identify operations on the PCI +* bus as belonging to a particular PCI function. +*/ +uint16_t fid; +uint8_t unused_0[5 ];/* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1'
@@ -4339,13 +5071,13 @@ struct hwrm_func_vf_free_output {uint8_t valid; } __attribute__((packed)); -/******************** -* hwrm_func_vf_cfg * -********************/ +/********************** +* hwrm_func_vf_alloc * +**********************/ -/* hwrm_func_vf_cfg_input (size:448b/56B) */ -struct hwrm_func_vf_cfg_input { +/* hwrm_func_vf_alloc_input (size:192b/24B) */ +struct hwrm_func_vf_alloc_input {/* The HWRM command request type. */ uint16_t req_type;/*
@@ -4375,17 +5107,162 @@ struct hwrm_func_vf_cfg_input {uint64_t resp_addr;uint32_t enables;/* -* This bit must be '1' for the mtu field to be +* This bit must be '1' for the first_vf_id field to be * configured. */ -#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \ - UINT32_C(0x1) +#define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1)/* -* This bit must be '1' for the guest_vlan field to be -* configured. +* This value is used to identify a Virtual Function (VF). +* The scope of VF ID is local within a PF. */ -#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \ - UINT32_C(0x2) +uint16_t first_vf_id; +/* The number of virtual functions requested. */ +uint16_t num_vfs; +} __attribute__((packed)); + +/* hwrm_func_vf_alloc_output (size:128b/16B) */ +struct hwrm_func_vf_alloc_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +/* The ID of the first VF allocated. */ +uint16_t first_vf_id; +uint8_t unused_0[5 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/********************* +* hwrm_func_vf_free * +*********************/ + + +/* hwrm_func_vf_free_input (size:192b/24B) */ +struct hwrm_func_vf_free_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +uint32_t enables; +/* +* This bit must be '1' for the first_vf_id field to be +* configured. +*/ +#define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) +/* +* This value is used to identify a Virtual Function (VF). +* The scope of VF ID is local within a PF. +*/ +uint16_t first_vf_id; +/* +* The number of virtual functions requested. +* 0xFFFF - Cleanup all children of this PF. +*/ +uint16_t num_vfs; +} __attribute__((packed)); + +/* hwrm_func_vf_free_output (size:128b/16B) */ +struct hwrm_func_vf_free_output { +/* The specific error status for the command. */ +uint16_t error_code; +/* The HWRM command request type. */ +uint16_t req_type; +/* The sequence ID from the original command. */ +uint16_t seq_id; +/* The length of the response data in number of bytes. */ +uint16_t resp_len; +uint8_t unused_0[7 ]; +/* +* This field is used in Output records to indicate that the output +* is completely written to RAM. This field should be read as '1' +* to indicate that the output has been completely written. +* When writing a command completion or response to an internal processor, +* the order of writes has to be such that this field is written last. +*/ +uint8_t valid; +} __attribute__((packed)); + +/******************** +* hwrm_func_vf_cfg * +********************/ + + +/* hwrm_func_vf_cfg_input (size:448b/56B) */ +struct hwrm_func_vf_cfg_input { +/* The HWRM command request type. */ +uint16_t req_type; +/* +* The completion ring to send the completion event on. This should +* be the NQ ID returned from the `nq_alloc` HWRM command. +*/ +uint16_t cmpl_ring; +/* +* The sequence ID is used by the driver for tracking multiple +* commands. This ID is treated as opaque data by the firmware and +* the value is returned in the `hwrm_resp_hdr` upon completion. +*/ +uint16_t seq_id; +/* +* The target ID of the command: +* * 0x0-0xFFF8 - The function ID +* * 0xFFF8-0xFFFE - Reserved for internal processors +* * 0xFFFF - HWRM +*/ +uint16_t target_id; +/* +* A physical address pointer pointing to a host buffer that the +* command's response data will be written. This can be either a host +* physical address (HPA) or a guest physical address (GPA) and must +* point to a physically contiguous block of memory. +*/ +uint64_t resp_addr; +uint32_t enables; +/* +* This bit must be '1' for the mtu field to be +* configured. +*/ +#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \ + UINT32_C(0x1) +/* +* This bit must be '1' for the guest_vlan field to be +* configured. +*/ +#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \ + UINT32_C(0x2)/* * This bit must be '1' for the async_event_cr field to be * configured.
@@ -6946,13 +7823,13 @@ struct hwrm_func_resource_qcaps_output {uint8_t valid; } __attribute__((packed)); -/*********************** -* hwrm_func_vlan_qcfg * -***********************/ +/********************************* +* hwrm_func_backing_store_qcaps * +*********************************/ -/* hwrm_func_vlan_qcfg_input (size:192b/24B) */ -struct hwrm_func_vlan_qcfg_input { +/* hwrm_func_backing_store_qcaps_input (size:128b/16B) */ +struct hwrm_func_backing_store_qcaps_input {/* The HWRM command request type. */ uint16_t req_type;/*
@@ -6980,18 +7857,10 @@ struct hwrm_func_vlan_qcfg_input {* point to a physically contiguous block of memory. */ uint64_t resp_addr; -/* -* Function ID of the function that is being -* configured. -* If set to 0xFF... (All Fs), then the configuration is -* for the requesting function. -*/ -uint16_t fid; -uint8_t unused_0[6 ]; } __attribute__((packed)); -/* hwrm_func_vlan_qcfg_output (size:320b/40B) */ -struct hwrm_func_vlan_qcfg_output { +/* hwrm_func_backing_store_qcaps_output (size:576b/72B) */ +struct hwrm_func_backing_store_qcaps_output {/* The specific error status for the command. */ uint16_t error_code;/* The HWRM command request type. */
@@ -7000,32 +7869,85 @@ struct hwrm_func_vlan_qcfg_output {uint16_t seq_id;/* The length of the response data in number of bytes. */ uint16_t resp_len; -uint64_t unused_0; -/* S-TAG VLAN identifier configured for the function. */ -uint16_t stag_vid; -/* S-TAG PCP value configured for the function. */ -uint8_t stag_pcp; -uint8_t unused_1; -/* -* S-TAG TPID value configured for the function. This field is specified in -* network byte order. -*/ -uint16_t stag_tpid; -/* C-TAG VLAN identifier configured for the function. */ -uint16_t ctag_vid; -/* C-TAG PCP value configured for the function. */ -uint8_t ctag_pcp; -uint8_t unused_2; +/* Maximum number of QP context entries supported for this function. */ +uint32_t qp_max_entries; +/* +* Minimum number of QP context entries that are needed to be reserved +* for QP1 for the PF and its VFs. PF drivers must allocate at least +* this many QP context entries, even if RoCE will not be used. +*/ +uint16_t qp_min_qp1_entries; +/* Maximum number of QP context entries that can be used for L2. */ +uint16_t qp_max_l2_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t qp_entry_size; +/* Maximum number of SRQ context entries that can be used for L2. */ +uint16_t srq_max_l2_entries; +/* Maximum number of SRQ context entries supported for this function. */ +uint32_t srq_max_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t srq_entry_size; +/* Maximum number of CQ context entries that can be used for L2. */ +uint16_t cq_max_l2_entries; +/* Maximum number of CQ context entries supported for this function. */ +uint32_t cq_max_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t cq_entry_size; +/* Maximum number of VNIC context entries supported for this function. */ +uint16_t vnic_max_vnic_entries; +/* Maximum number of Ring table context entries supported for this function. */ +uint16_t vnic_max_ring_table_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t vnic_entry_size; +/* Maximum number of statistic context entries supported for this function. */ +uint32_t stat_max_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t stat_entry_size; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t tqm_entry_size; +/* Minimum number of TQM context entries required per ring. */ +uint32_t tqm_min_entries_per_ring; +/* +* Maximum number of TQM context entries supported per ring. This is +* actually a recommended TQM queue size based on worst case usage of +* the TQM queue. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* TQM slowpath rings should be sized as follows: +* +* num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size +* +* Where: +* num_vnics is the number of VNICs allocated in the VNIC backing store +* num_l2_tx_rings is the number of L2 rings in the QP backing store +* num_roce_qps is the number of RoCE QPs in the QP backing store +* tqm_min_size is tqm_min_entries_per_ring reported by +* HWRM_FUNC_BACKING_STORE_QCAPS +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_max_entries_per_ring; +/* Maximum number of MR/AV context entries supported for this function. */ +uint32_t mrav_max_entries; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t mrav_entry_size; +/* Number of bytes that must be allocated for each context entry. */ +uint16_t tim_entry_size; +/* Maximum number of Timer context entries supported for this function. */ +uint32_t tim_max_entries; +uint8_t unused_0[2 ];/* -* C-TAG TPID value configured for the function. This field is specified in -* network byte order. +* The number of entries specified for any TQM ring must be a +* multiple of this value to prevent any resource allocation +* limitations. */ -uint16_t ctag_tpid; -/* Future use. */ -uint32_t rsvd2; -/* Future use. */ -uint32_t rsvd3; -uint8_t unused_3[3 ]; +uint8_t tqm_entries_multiple;/* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1'
@@ -7036,13 +7958,13 @@ struct hwrm_func_vlan_qcfg_output {uint8_t valid; } __attribute__((packed)); -/********************** -* hwrm_func_vlan_cfg * -**********************/ +/******************************* +* hwrm_func_backing_store_cfg * +*******************************/ -/* hwrm_func_vlan_cfg_input (size:384b/48B) */ -struct hwrm_func_vlan_cfg_input { +/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */ +struct hwrm_func_backing_store_cfg_input {/* The HWRM command request type. */ uint16_t req_type;/*
@@ -7070,74 +7992,968 @@ struct hwrm_func_vlan_cfg_input {* point to a physically contiguous block of memory. */ uint64_t resp_addr; +uint32_t flags;/* -* Function ID of the function that is being -* configured. -* If set to 0xFF... (All Fs), then the configuration is -* for the requesting function. +* When set, the firmware only uses on-chip resources and does not +* expect any backing store to be provided by the host driver. This +* mode provides minimal L2 functionality (e.g. limited L2 resources, +* no RoCE). */ -uint16_t fid; -uint8_t unused_0[2 ]; +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \ + UINT32_C(0x1)uint32_t enables;/* -* This bit must be '1' for the stag_vid field to be +* This bit must be '1' for the qp fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \ + UINT32_C(0x1)/* -* This bit must be '1' for the ctag_vid field to be +* This bit must be '1' for the srq fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \ + UINT32_C(0x2)/* -* This bit must be '1' for the stag_pcp field to be +* This bit must be '1' for the cq fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \ + UINT32_C(0x4)/* -* This bit must be '1' for the ctag_pcp field to be +* This bit must be '1' for the vnic fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \ + UINT32_C(0x8)/* -* This bit must be '1' for the stag_tpid field to be +* This bit must be '1' for the stat fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \ + UINT32_C(0x10)/* -* This bit must be '1' for the ctag_tpid field to be +* This bit must be '1' for the tqm_sp fields to be * configured. */ -#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20) -/* S-TAG VLAN identifier configured for the function. */ -uint16_t stag_vid; -/* S-TAG PCP value configured for the function. */ -uint8_t stag_pcp; -uint8_t unused_1; +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \ + UINT32_C(0x20)/* -* S-TAG TPID value configured for the function. This field is specified in -* network byte order. +* This bit must be '1' for the tqm_ring0 fields to be +* configured. */ -uint16_t stag_tpid; -/* C-TAG VLAN identifier configured for the function. */ -uint16_t ctag_vid; -/* C-TAG PCP value configured for the function. */ -uint8_t ctag_pcp; -uint8_t unused_2; +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \ + UINT32_C(0x40)/* -* C-TAG TPID value configured for the function. This field is specified in -* network byte order. +* This bit must be '1' for the tqm_ring1 fields to be +* configured. */ -uint16_t ctag_tpid; -/* Future use. */ -uint32_t rsvd1; -/* Future use. */ -uint32_t rsvd2; -uint8_t unused_3[4 ]; -} __attribute__((packed)); - -/* hwrm_func_vlan_cfg_output (size:128b/16B) */ -struct hwrm_func_vlan_cfg_output { +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \ + UINT32_C(0x80) +/* +* This bit must be '1' for the tqm_ring2 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \ + UINT32_C(0x100) +/* +* This bit must be '1' for the tqm_ring3 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \ + UINT32_C(0x200) +/* +* This bit must be '1' for the tqm_ring4 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \ + UINT32_C(0x400) +/* +* This bit must be '1' for the tqm_ring5 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \ + UINT32_C(0x800) +/* +* This bit must be '1' for the tqm_ring6 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \ + UINT32_C(0x1000) +/* +* This bit must be '1' for the tqm_ring7 fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \ + UINT32_C(0x2000) +/* +* This bit must be '1' for the mrav fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \ + UINT32_C(0x4000) +/* +* This bit must be '1' for the tim fields to be +* configured. +*/ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \ + UINT32_C(0x8000) +/* QPC page size and level. */ +uint8_t qpc_pg_size_qpc_lvl; +/* QPC PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 +/* QPC page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G +/* SRQ page size and level. */ +uint8_t srq_pg_size_srq_lvl; +/* SRQ PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 +/* SRQ page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G +/* CQ page size and level. */ +uint8_t cq_pg_size_cq_lvl; +/* CQ PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 +/* CQ page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G +/* VNIC page size and level. */ +uint8_t vnic_pg_size_vnic_lvl; +/* VNIC PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 +/* VNIC page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G +/* Stat page size and level. */ +uint8_t stat_pg_size_stat_lvl; +/* Stat PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 +/* Stat page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G +/* TQM slow path page size and level. */ +uint8_t tqm_sp_pg_size_tqm_sp_lvl; +/* TQM slow path PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 +/* TQM slow path page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G +/* TQM ring 0 page size and level. */ +uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; +/* TQM ring 0 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 +/* TQM ring 0 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G +/* TQM ring 1 page size and level. */ +uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; +/* TQM ring 1 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 +/* TQM ring 1 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G +/* TQM ring 2 page size and level. */ +uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; +/* TQM ring 2 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 +/* TQM ring 2 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G +/* TQM ring 3 page size and level. */ +uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; +/* TQM ring 3 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 +/* TQM ring 3 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G +/* TQM ring 4 page size and level. */ +uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; +/* TQM ring 4 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 +/* TQM ring 4 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G +/* TQM ring 5 page size and level. */ +uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; +/* TQM ring 5 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 +/* TQM ring 5 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G +/* TQM ring 6 page size and level. */ +uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; +/* TQM ring 6 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 +/* TQM ring 6 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G +/* TQM ring 7 page size and level. */ +uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; +/* TQM ring 7 PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 +/* TQM ring 7 page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G +/* MR/AV page size and level. */ +uint8_t mrav_pg_size_mrav_lvl; +/* MR/AV PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 +/* MR/AV page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G +/* Timer page size and level. */ +uint8_t tim_pg_size_tim_lvl; +/* Timer PBL indirect levels. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \ + UINT32_C(0xf) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT 0 +/* PBL pointer is physical start address. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \ + UINT32_C(0x0) +/* PBL pointer points to PTE table. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \ + UINT32_C(0x1) +/* PBL pointer points to PDE table with each entry pointing to PTE tables. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \ + UINT32_C(0x2) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 +/* Timer page size. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \ + UINT32_C(0xf0) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT 4 +/* 4KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) +/* 8KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) +/* 64KB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) +/* 2MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) +/* 8MB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) +/* 1GB. */ +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) +#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G +/* QP page directory. */ +uint64_t qpc_page_dir; +/* SRQ page directory. */ +uint64_t srq_page_dir; +/* CQ page directory. */ +uint64_t cq_page_dir; +/* VNIC page directory. */ +uint64_t vnic_page_dir; +/* Stat page directory. */ +uint64_t stat_page_dir; +/* TQM slowpath page directory. */ +uint64_t tqm_sp_page_dir; +/* TQM ring 0 page directory. */ +uint64_t tqm_ring0_page_dir; +/* TQM ring 1 page directory. */ +uint64_t tqm_ring1_page_dir; +/* TQM ring 2 page directory. */ +uint64_t tqm_ring2_page_dir; +/* TQM ring 3 page directory. */ +uint64_t tqm_ring3_page_dir; +/* TQM ring 4 page directory. */ +uint64_t tqm_ring4_page_dir; +/* TQM ring 5 page directory. */ +uint64_t tqm_ring5_page_dir; +/* TQM ring 6 page directory. */ +uint64_t tqm_ring6_page_dir; +/* TQM ring 7 page directory. */ +uint64_t tqm_ring7_page_dir; +/* MR/AV page directory. */ +uint64_t mrav_page_dir; +/* Timer page directory. */ +uint64_t tim_page_dir; +/* Number of QPs. */ +uint32_t qp_num_entries; +/* Number of SRQs. */ +uint32_t srq_num_entries; +/* Number of CQs. */ +uint32_t cq_num_entries; +/* Number of Stats. */ +uint32_t stat_num_entries; +/* +* Number of TQM slowpath entries. +* +* TQM slowpath rings should be sized as follows: +* +* num_entries = num_vnics + num_l2_tx_rings + num_roce_qps + tqm_min_size +* +* Where: +* num_vnics is the number of VNICs allocated in the VNIC backing store +* num_l2_tx_rings is the number of L2 rings in the QP backing store +* num_roce_qps is the number of RoCE QPs in the QP backing store +* tqm_min_size is tqm_min_entries_per_ring reported by +* HWRM_FUNC_BACKING_STORE_QCAPS +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_sp_num_entries; +/* +* Number of TQM ring 0 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring0_num_entries; +/* +* Number of TQM ring 1 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring1_num_entries; +/* +* Number of TQM ring 2 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring2_num_entries; +/* +* Number of TQM ring 3 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring3_num_entries; +/* +* Number of TQM ring 4 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring4_num_entries; +/* +* Number of TQM ring 5 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring5_num_entries; +/* +* Number of TQM ring 6 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring6_num_entries; +/* +* Number of TQM ring 7 entries. +* +* TQM fastpath rings should be sized large enough to accommodate the +* maximum number of QPs (either L2 or RoCE, or both if shared) +* that can be enqueued to the TQM ring. +* +* Note that TQM ring sizes cannot be extended while the system is +* operational. If a PF driver needs to extend a TQM ring, it needs +* to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate +* the backing store. +*/ +uint32_t tqm_ring7_num_entries; +/* Number of MR/AV entries. */ +uint32_t mrav_num_entries; +/* Number of Timer entries. */ +uint32_t tim_num_entries; +/* Number of entries to reserve for QP1 */ +uint16_t qp_num_qp1_entries; +/* Number of entries to reserve for L2 */ +uint16_t qp_num_l2_entries; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t qp_entry_size; +/* Number of entries to reserve for L2 */ +uint16_t srq_num_l2_entries; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t srq_entry_size; +/* Number of entries to reserve for L2 */ +uint16_t cq_num_l2_entries; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t cq_entry_size; +/* Number of entries to reserve for VNIC entries */ +uint16_t vnic_num_vnic_entries; +/* Number of entries to reserve for Ring table entries */ +uint16_t vnic_num_ring_table_entries; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t vnic_entry_size; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t stat_entry_size; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t tqm_entry_size; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t mrav_entry_size; +/* Number of bytes that have been allocated for each context entry. */ +uint16_t tim_entry_size; +} __attribute__((packed)); + +/* hwrm_func_backing_store_cfg_output (size:128b/16B) */ +struct hwrm_func_backing_store_cfg_output {/* The specific error status for the command. */ uint16_t error_code;/* The HWRM command request type. */
@@ -7157,13 +8973,13 @@ struct hwrm_func_vlan_cfg_output {uint8_t valid; } __attribute__((packed)); -/******************************* -* hwrm_func_vf_vnic_ids_query * -*******************************/ +/******************************** +* hwrm_func_backing_store_qcfg * +********************************/ -/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */ -struct hwrm_func_vf_vnic_ids_query_input { +/* hwrm_func_backing_store_qcfg_input (size:128b/16B) */ +struct hwrm_func_backing_store_qcfg_input {/* The HWRM command request type. */ uint16_t req_type;/*
@@ -7191,20 +9007,10 @@ struct hwrm_func_vf_vnic_ids_query_input {* point to a physically contiguous block of memory. */ uint64_t resp_addr; -/* -* This value is used to identify a Virtual Function (VF). -* The scope of VF ID is local within a PF. -*/ -uint16_t vf_id; -uint8_t unused_0[2 ]; -/* Max number of vnic ids in vnic id table */ -uint32_t max_vnic_id_cnt; -/* This is the address for VF VNIC ID table */ -uint64_t vnic_id_tbl_addr; } __attribute__((packed)); -/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */ -struct hwrm_func_vf_vnic_ids_query_output { +/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */ +struct hwrm_func_backing_store_qcfg_output {/* The specific error status for the command. */ uint16_t error_code;/* The HWRM command request type. */
@@ -7213,302 +9019,871 @@ struct hwrm_func_vf_vnic_ids_query_output {uint16_t seq_id;/* The length of the response data in number of bytes. */ uint16_t resp_len; +uint32_t flags;/* -* Actual number of vnic ids -* -* Each VNIC ID is written as a 32-bit number. +* When set, the firmware only uses on-chip resources and does not +* expect any backing store to be provided by the host driver. This +* mode provides minimal L2 functionality (e.g. limited L2 resources, +* no RoCE). */ -uint32_t vnic_id_cnt; -uint8_t unused_0[3 ]; +#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \ + UINT32_C(0x1) +uint8_t unused_0[4 ];/* -* This field is used in Output records to indicate that the output -* is completely written to RAM. This field should be read as '1' -* to indicate that the output has been completely written. -* When writing a command completion or response to an internal processor, -* the order of writes has to be such that this field is written last. +* This bit must be '1' for the qp fields to be +* configured. */ -uint8_t valid; -} __attribute__((packed)); - -/*********************** -* hwrm_func_vf_bw_cfg * -***********************/ - - -/* hwrm_func_vf_bw_cfg_input (size:960b/120B) */ -struct hwrm_func_vf_bw_cfg_input { -/* The HWRM command request type. */ -uint16_t req_type; +#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \ + UINT32_C(0x1)/* -* The completion ring to send the completion event on. This should -* be the NQ ID returned from the `nq_alloc` HWRM command. +* This bit must be '1' for the srq fields to be +* configured. */ -uint16_t cmpl_ring; +#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \ + UINT32_C(0x2)/* -* The sequence ID is used by the driver for tracking multiple -* commands. This ID is treated as opaque data by the firmware and -* the value is returned in the `hwrm_resp_hdr` upon completion. +* This bit must be '1' for the cq fields to be +* configured. */ -uint16_t seq_id; +#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \ + UINT32_C(0x4)/* -* The target ID of the command: -* * 0x0-0xFFF8 - The function ID -* * 0xFFF8-0xFFFE - Reserved for internal processors -* * 0xFFFF - HWRM -*/ -uint16_t target_id; -/*
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1 (Apple Git-112)
Part of the diff is not shown here. View the raw message.
PATCH v3 7/15 net/bnxt: add support for extended port counters
In reply to Ajit KhapardeThis patch adds support extended port statistics like COS bytes, packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
--- drivers/net/bnxt/bnxt.h | 8 ++ drivers/net/bnxt/bnxt_ethdev.c | 30 ++++- drivers/net/bnxt/bnxt_hwrm.c | 44 +++++++ drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_stats.c | 209 ++++++++++++++++++++++++++++++++- 5 files changed, 289 insertions(+), 7 deletions(-)
drivers/net/bnxt/bnxt.h +8 -0
@@ -250,6 +250,8 @@ struct bnxt {#define BNXT_FLAG_UPDATE_HASH (1 << 5)#define BNXT_FLAG_PTP_SUPPORTED (1 << 6)#define BNXT_FLAG_MULTI_HOST (1 << 7) +#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8) +#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -264,6 +266,9 @@ struct bnxt {const void *rx_mem_zone;struct rx_port_stats *hw_rx_port_stats;rte_iova_t hw_rx_port_stats_map; +struct rx_port_stats_ext *hw_rx_port_stats_ext; +rte_iova_t hw_rx_port_stats_ext_map; +uint16_t fw_rx_port_stats_ext_size;unsigned int tx_nr_rings;unsigned int tx_cp_nr_rings;
@@ -271,6 +276,9 @@ struct bnxt {const void *tx_mem_zone;struct tx_port_stats *hw_tx_port_stats;rte_iova_t hw_tx_port_stats_map; +struct tx_port_stats_ext *hw_tx_port_stats_ext; +rte_iova_t hw_tx_port_stats_ext_map; +uint16_t fw_tx_port_stats_ext_size;/* Default completion ring */ struct bnxt_cp_ring_info *def_cp_ring;
drivers/net/bnxt/bnxt_ethdev.c +28 -2
@@ -3215,7 +3215,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct rx_port_stats ) +512 ); +sizeof (struct rx_port_stats ) + +sizeof (struct rx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len, SOCKET_ID_ANY,
@@ -3251,7 +3253,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct tx_port_stats ) +512 ); +sizeof (struct tx_port_stats ) + +sizeof (struct tx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len,
@@ -3282,8 +3286,30 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) bp->hw_tx_port_stats_map = mz_phys_addr; bp->flags |=BNXT_FLAG_PORT_STATS ; + +/* Display extended statistics if FW supports it */ +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_8_4 || + bp->hwrm_spec_code ==HWRM_SPEC_CODE_1_9_0 ) + goto skip_ext_stats; + + bp->hw_rx_port_stats_ext = (void *) + (bp->hw_rx_port_stats +sizeof (struct rx_port_stats )); + bp->hw_rx_port_stats_ext_map = bp->hw_rx_port_stats_map + +sizeof (struct rx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_RX_PORT_STATS ; + + +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_9_2 ) { + bp->hw_tx_port_stats_ext = (void *) + (bp->hw_tx_port_stats +sizeof (struct tx_port_stats )); + bp->hw_tx_port_stats_ext_map = + bp->hw_tx_port_stats_map + +sizeof (struct tx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_TX_PORT_STATS ; + } } +skip_ext_stats: rc =bnxt_alloc_hwrm_resources (bp);if (rc) { PMD_DRV_LOG(ERR,
drivers/net/bnxt/bnxt_hwrm.c +44 -0
47 lines not on this page · raw message
drivers/net/bnxt/bnxt_hwrm.h +5 -0
@@ -32,6 +32,10 @@ struct bnxt_cp_ring_info;#define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESV_STRATEGY_MINIMAL_STATIC \ HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC +#define HWRM_SPEC_CODE_1_8_4 0x10804 +#define HWRM_SPEC_CODE_1_9_0 0x10900 +#define HWRM_SPEC_CODE_1_9_2 0x10902 +int bnxt_hwrm_cfa_l2_clear_rx_mask (struct bnxt *bp,struct bnxt_vnic_info *vnic); int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic,
@@ -174,4 +178,5 @@ int bnxt_vnic_rss_configure(struct bnxt *bp,int bnxt_hwrm_set_ring_coal (struct bnxt *bp,struct bnxt_coal *coal,uint16_t ring_id);int bnxt_hwrm_check_vf_rings (struct bnxt *bp); +int bnxt_hwrm_ext_port_qstats (struct bnxt *bp);#endif
drivers/net/bnxt/bnxt_stats.c +204 -5
256 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 8/15 net/bnxt: add support to enable new mailbox channel
In reply to Ajit KhapardeFor hardware having multiple embedded management processors the firmware has added support to indicate if the comm channel to the processor has been enabled. If the channel is enabled, switch the CFA NTUPLE and EM filtering commands to use the kong channel.
--- drivers/net/bnxt/bnxt.h | 11 ++ drivers/net/bnxt/bnxt_hwrm.c | 333 ++++++++++++++++++----------------- 2 files changed, 184 insertions(+), 160 deletions(-)
drivers/net/bnxt/bnxt.h +11 -0
@@ -33,6 +33,13 @@#define BNXT_MAX_RX_RING_DESC 8192#define BNXT_DB_SIZE 0x80 +/* Chimp Communication Channel */ +#define GRCPF_REG_CHIMP_CHANNEL_OFFSET 0x0 +#define GRCPF_REG_CHIMP_COMM_TRIGGER 0x100 +/* Kong Communication Channel */ +#define GRCPF_REG_KONG_CHANNEL_OFFSET 0xA00 +#define GRCPF_REG_KONG_COMM_TRIGGER 0xB00 +#define BNXT_INT_LAT_TMR_MIN 75#define BNXT_INT_LAT_TMR_MAX 150#define BNXT_NUM_CMPL_AGGR_INT 36
@@ -252,6 +259,7 @@ struct bnxt {#define BNXT_FLAG_MULTI_HOST (1 << 7)#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9) +#define BNXT_FLAG_KONG_MB_EN (1 << 10)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -259,6 +267,8 @@ struct bnxt {#define BNXT_NPAR (bp) ((bp)->port_partition_type)#define BNXT_MH (bp) ((bp)->flags & BNXT_FLAG_MULTI_HOST)#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp)) +#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp. +#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
@@ -299,6 +309,7 @@ struct bnxt {uint8_t mac_addr[ETHER_ADDR_LEN ];uint16_t hwrm_cmd_seq; +uint16_t kong_cmd_seq;void *hwrm_cmd_resp_addr;rte_iova_t hwrm_cmd_resp_dma_addr;void *hwrm_short_cmd_req_addr;
drivers/net/bnxt/bnxt_hwrm.c +173 -160
1,136 lines not on this page · raw message
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 9/15 net/bnxt: add support for trusted VF
In reply to Ajit KhapardeIn the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands. Newer firmware has added support to allow VF to be trusted. Now the VF queries if it is a trusted entity and based on that it can send HWRM commands to the firmware.
--- drivers/net/bnxt/bnxt.h | 2 ++ drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 4 ++-- drivers/net/bnxt/bnxt_hwrm.c | 8 ++++++++ 4 files changed, 13 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt.h +2 -0
@@ -260,6 +260,7 @@ struct bnxt {#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_KONG_MB_EN (1 << 10) +#define BNXT_FLAG_TRUSTED_VF_EN (1 << 11)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -269,6 +270,7 @@ struct bnxt {#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp))#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp.#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN) +#define BNXT_VF_IS_TRUSTED (bp) ((bp)->flags & BNXT_FLAG_TRUSTED_VF_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
drivers/net/bnxt/bnxt_cpr.c +1 -0
@@ -35,6 +35,7 @@ void bnxt_handle_async_event(struct bnxt *bp,break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE :PMD_DRV_LOG (INFO ,"Async event: VF config changed\n" ); +bnxt_hwrm_func_qcfg (bp);break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED :PMD_DRV_LOG (INFO ,"Port conn async event\n" );
drivers/net/bnxt/bnxt_ethdev.c +2 -2
@@ -755,7 +755,7 @@ static int bnxt_mac_addr_add_op(struct rte_eth_dev *eth_dev,struct bnxt_vnic_info *vnic = &bp->vnic_info[pool];struct bnxt_filter_info *filter; -if (BNXT_VF (bp)) { +if (BNXT_VF (bp) & !BNXT_VF_IS_TRUSTED (bp)) {PMD_DRV_LOG (ERR ,"Cannot add MAC address to a VF interface\n" );return -ENOTSUP ; }
@@ -1447,7 +1447,7 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)struct bnxt_filter_info *filter;int rc; -if (BNXT_VF (bp)) +if (BNXT_VF (bp) && !BNXT_VF_IS_TRUSTED (bp))return -EPERM ;memcpy (bp->mac_addr, addr,sizeof (bp->mac_addr));
drivers/net/bnxt/bnxt_hwrm.c +8 -0
@@ -909,6 +909,9 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) bp->flags |=BNXT_FLAG_KONG_MB_EN ;PMD_DRV_LOG (DEBUG ,"Kong mailbox channel enabled\n" ); } +if (dev_caps_cfg & +HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_TRUSTED_VF_SUPPORTED ) +PMD_DRV_LOG (DEBUG ,"FW supports Trusted VFs\n" ); error:HWRM_UNLOCK ();
@@ -2458,6 +2461,11 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)if (BNXT_PF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST )) bp->flags |=BNXT_FLAG_MULTI_HOST ; +if (BNXT_VF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF )) { + bp->flags |=BNXT_FLAG_TRUSTED_VF_EN ; +PMD_DRV_LOG (INFO ,"Trusted VF cap enabled\n" ); + } +switch (resp->port_partition_type) {case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 :case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 :
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 10/15 net/bnxt: fix registration of VF async event completion ring
In reply to Ajit KhapardeFrom: yongping <[email protected]>
While registering vf's event completion ring to FW, use the wrong macro, FW doesn't set up the event completion ring successfully, VF can't receive any async event.
--v1->v2:
Shorten commit log and message as per review comment
--- drivers/net/bnxt/bnxt_hwrm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bnxt/bnxt_hwrm.c +1 -1
@@ -3001,7 +3001,7 @@ int bnxt_hwrm_vf_func_cfg_def_cp(struct bnxt *bp)HWRM_PREP (req,FUNC_VF_CFG ,BNXT_USE_CHIMP_MB ); req.enables =rte_cpu_to_le_32 ( -HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); +HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR ); req.async_event_cr =rte_cpu_to_le_16 ( bp->def_cp_ring->cp_ring_struct->fw_ring_id); rc =bnxt_hwrm_send_message (bp, &req,sizeof (req),BNXT_USE_CHIMP_MB );
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 11/15 net/bnxt: set MAC filtering as outer for non tunnel frames
In reply to Ajit KhapardeWe need to set HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST bit in L2_FILTER_ALLOC for filtering non-tunnel packets based on outermost MAC.
--v1->v2:
Add "Fixes" to the commit message.
--- drivers/net/bnxt/bnxt_hwrm.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/bnxt/bnxt_hwrm.c +2 -0
@@ -383,6 +383,8 @@ int bnxt_hwrm_set_l2_filter(struct bnxt *bp,HWRM_PREP (req,CFA_L2_FILTER_ALLOC ,BNXT_USE_CHIMP_MB ); req.flags =rte_cpu_to_le_32 (filter->flags); + req.flags |= +rte_cpu_to_le_32 (HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST ); enables = filter->enables |HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID ;
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 12/15 net/bnxt: set a VNIC as default only once
In reply to Ajit KhapardeIf a vnic is configured as default and the setting has not changed, there is no need to issue this setting again to the FW.
--v1->v2:
Add "Fixes" to commit message
--- drivers/net/bnxt/bnxt.h | 1 + drivers/net/bnxt/bnxt_hwrm.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-)
drivers/net/bnxt/bnxt.h +1 -0
@@ -261,6 +261,7 @@ struct bnxt {#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_KONG_MB_EN (1 << 10)#define BNXT_FLAG_TRUSTED_VF_EN (1 << 11) +#define BNXT_FLAG_DFLT_VNIC_SET (1 << 12)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
drivers/net/bnxt/bnxt_hwrm.c +8 -1
@@ -1460,9 +1460,12 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic) req.cos_rule =rte_cpu_to_le_16 (vnic->cos_rule); req.lb_rule =rte_cpu_to_le_16 (vnic->lb_rule); req.mru =rte_cpu_to_le_16 (vnic->mru); -if (vnic->func_default) +/* Configure default VNIC only once. */ +if (vnic->func_default && !(bp->flags &BNXT_FLAG_DFLT_VNIC_SET )) { req.flags |=rte_cpu_to_le_32 (HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT ); + bp->flags |=BNXT_FLAG_DFLT_VNIC_SET ; + }if (vnic->vlan_strip) req.flags |=rte_cpu_to_le_32 (HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE );
@@ -1600,6 +1603,10 @@ int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic)HWRM_UNLOCK (); vnic->fw_vnic_id =INVALID_HW_RING_ID ; +/* Configure default VNIC again if necessary. */ +if (vnic->func_default && (bp->flags &BNXT_FLAG_DFLT_VNIC_SET )) + bp->flags &= ~BNXT_FLAG_DFLT_VNIC_SET ; +return rc; }
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 13/15 net/bnxt: set VLAN strip mode before default VNIC cfg
In reply to Ajit KhapardeFrom: Bei Sun <[email protected]>
Firmware sets pf pair in default VNIC cfg. If the VLAN strip setting is not available at this time, it will not be configured correctly in the CFA.
Set the desired VLAN strip mode before default VNIC configuration.
--v1->v2:
Update commit message as per review comment
--- drivers/net/bnxt/bnxt_ethdev.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/net/bnxt/bnxt_ethdev.c +12 -0
@@ -202,7 +202,9 @@ static int bnxt_init_chip(struct bnxt *bp)struct bnxt_rx_queue *rxq;struct rte_eth_link new;struct rte_pci_device *pci_dev =RTE_ETH_DEV_TO_PCI (bp->eth_dev); +struct rte_eth_conf *dev_conf = &bp->eth_dev->data->dev_conf;struct rte_intr_handle *intr_handle = &pci_dev->intr_handle; +uint64_t rx_offloads = dev_conf->rxmode.offloads;uint32_t intr_vector =0 ;uint32_t queue_id, base =BNXT_MISC_VEC_ID ;uint32_t vec =BNXT_MISC_VEC_ID ;
@@ -283,6 +285,16 @@ static int bnxt_init_chip(struct bnxt *bp) } } +/* +* Firmware sets pf pair in default vnic cfg. If the VLAN strip +* setting is not available at this time, it will not be +* configured correctly in the CFA. +*/ +if (rx_offloads &DEV_RX_OFFLOAD_VLAN_STRIP ) + vnic->vlan_strip = true; +else + vnic->vlan_strip = false; + rc =bnxt_hwrm_vnic_cfg (bp, vnic);if (rc) { PMD_DRV_LOG(ERR, "HWRM vnic %d cfg failure rc: %x\n",
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 14/15 net/bnxt: remove excess log messages
In reply to Ajit KhapardeWhen the firmware version and the driver HWRM version do not match, we are logging some messages. These messages unnecessarily clutter the logs and can add to the noise. We are logging the HWRM version and the firmware version anyway. The difference in version numbers can be gleaned from that. Removing the remaining log messages.
--v1->v2:
Add "Fixes" to the commit message.
--- drivers/net/bnxt/bnxt_hwrm.c | 20 -------------------- 1 file changed, 20 deletions(-)
drivers/net/bnxt/bnxt_hwrm.c +0 -20
@@ -789,7 +789,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)int rc =0 ;struct hwrm_ver_get_input req = {.req_type =0 };struct hwrm_ver_get_output *resp = bp->hwrm_cmd_resp_addr; -uint32_t my_version;uint32_t fw_version;uint16_t max_resp_len;char type[RTE_MEMZONE_NAMESIZE ];
@@ -817,10 +816,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)PMD_DRV_LOG (INFO ,"Driver HWRM version: %d.%d.%d\n" ,HWRM_VERSION_MAJOR ,HWRM_VERSION_MINOR ,HWRM_VERSION_UPDATE ); - my_version =HWRM_VERSION_MAJOR <<16 ; - my_version |=HWRM_VERSION_MINOR <<8 ; - my_version |=HWRM_VERSION_UPDATE ; - fw_version = resp->hwrm_intf_maj_8b <<16 ; fw_version |= resp->hwrm_intf_min_8b <<8 ; fw_version |= resp->hwrm_intf_upd_8b;
@@ -832,21 +827,6 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) goto error; } -if (my_version != fw_version) { -PMD_DRV_LOG (INFO ,"BNXT Driver/HWRM API mismatch.\n" ); -if (my_version < fw_version) { -PMD_DRV_LOG (INFO , -"Firmware API version is newer than driver.\n" ); -PMD_DRV_LOG (INFO , -"The driver may be missing features.\n" ); - }else { -PMD_DRV_LOG (INFO , -"Firmware API version is older than driver.\n" ); -PMD_DRV_LOG (INFO , -"Not all driver features may be functional.\n" ); - } - } -if (bp->max_req_len > resp->max_req_win_len) {PMD_DRV_LOG (ERR ,"Unsupported request length\n" ); rc = -EINVAL ;
Signature · 1 line
2.17.1 (Apple Git-112)
PATCH v3 15/15 net/bnxt: reduce the polling interval for valid bit
In reply to Ajit KhapardeFrom: Xiaoxin Peng <[email protected]>
Change polling interval for valid bit in bnxt_hwrm_send_message Poll every 1us instead of 600us.
--- drivers/net/bnxt/bnxt_hwrm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt_hwrm.c +2 -2
@@ -26,7 +26,7 @@#include <rte_io.h> -#define HWRM_CMD_TIMEOUT 10000 +#define HWRM_CMD_TIMEOUT 6000000#define HWRM_SPEC_CODE_1_8_3 0x10803#define HWRM_VERSION_1_9_1 0x10901
@@ -135,7 +135,7 @@ static int bnxt_hwrm_send_message(struct bnxt *bp, void *msg,if (*valid ==HWRM_RESP_VALID_KEY )break ; } -rte_delay_us (600 ); +rte_delay_us (1 ); }if (i >=HWRM_CMD_TIMEOUT ) {
Signature · 1 line
2.17.1 (Apple Git-112)
Quoted 16 lines · Ajit Khaparde
Patchset against dpdk-next-net.
v1->v2:
net/bnxt: get rid of ff pools array and use the vnic info array instead
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.net/bnxt: update HWRM version
- Update from 1.9.2.45 to version 1.9.2.53
v2->v3:
net/bnxt: update HWRM version
- Tried to split into more than one patch.- Updated commit logs and messages for rest based on review comments.
Quoted 7 lines
Please apply.
Ajit Khaparde (10):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: update HWRM version part 2
net/bnxt: update HWRM version part 3
Is there a logical to separation of part 1,2 & 3?
Commit logs are empty and there is nothing distinctive from commits. If the separation is not logical but just physically split into 3 pieces I am for merging them back with the "Update the HWRM API to version 1.9.2.53" commit log.
Or if there is a logic please clarify it on patch subject and commit log.
I will wait your answer before moving on.
Thanks,
ferruh
Quoted 6 lines
Quoted 5 lines
net/bnxt: update HWRM version
net/bnxt: update HWRM version part 2
net/bnxt: update HWRM version part 3
Quoted 6 lines
Is there a logical to separation of part 1,2 & 3?
Commit logs are empty and there is nothing distinctive from commits. If the separation is not logical but just physically split into 3 pieces I am for merging them back with the "Update the HWRM API to version 1.9.2.53" commit log.
Ferruh, It was a physical split into 3 patches.
So merging them into one is ok.
Thanks for checking.
Ajit
Quoted 8 lines
Or if there is a logic please clarify it on patch subject and commit log.
I will wait your answer before moving on.
Thanks,
ferruh
Quoted 37 lines · Ajit Khaparde
Patchset against dpdk-next-net.
v1->v2:
net/bnxt: get rid of ff pools array and use the vnic info array instead
- Fix access to uninitialized variable.
- Rectify the wrong 'Fixes' reference.net/bnxt: update HWRM version
- Update from 1.9.2.45 to version 1.9.2.53
v2->v3:
net/bnxt: update HWRM version
- Tried to split into more than one patch.- Updated commit logs and messages for rest based on review comments.
Please apply.
Ajit Khaparde (10):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: update HWRM version part 2
net/bnxt: update HWRM version part 3
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
net/bnxt: set MAC filtering as outer for non tunnel frames net/bnxt: set a VNIC as default only once net/bnxt: remove excess log messagesBei Sun (1):
net/bnxt: set VLAN strip mode before default VNIC cfgSomnath Kotur (2):
net/bnxt: get rid of ff pools and use VNIC info array net/bnxt: fix uninitialized ptr access in transmit handler
Quoted 5 lines
Xiaoxin Peng (1):
net/bnxt: reduce the polling interval for valid bitYongping Zhang (1):
net/bnxt: fix registration of VF async event completion ring
Series applied to dpdk-next-net/master, thanks.
(patches 5/15 & 6/15 are squashed into 4/15)
PATCH 2/7 net/bnxt: fix uninitialized ptr access in transmit handler
In reply to Ajit KhapardeFrom: Somnath Kotur <[email protected]>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1 which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
--- drivers/net/bnxt/bnxt_txr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt_txr.c +3 -2
@@ -120,7 +120,7 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, {struct bnxt_tx_ring_info *txr = txq->tx_ring;struct tx_bd_long *txbd; -struct tx_bd_long_hi *txbd1; +struct tx_bd_long_hi *txbd1 =NULL ;uint32_t vlan_tag_flags, cfa_action;bool long_bd = false;uint16_t last_prod =0 ;
@@ -295,7 +295,8 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt, } txbd->flags_type |=TX_BD_LONG_FLAGS_PACKET_END ; - txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); +if (txbd1) + txbd1->lflags =rte_cpu_to_le_32 (txbd1->lflags); txr->tx_prod =RING_NEXT (txr->tx_ring_struct, txr->tx_prod);
Signature · 1 line
2.15.2 (Apple Git-101.1)
Re: [PATCH 2/7] net/bnxt: fix uninitialized ptr access in transmit handler
Quoted 8 lines · Ajit Khaparde
From: Somnath Kotur <[email protected]>
bnxt_start_xmit()was attempting to access an uninitialized ptr - txbd1 which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.Fixes f10258e39ec2 ("net/bnxt: fix HW Tx checksum offload check")
dpdk.org
PATCH 3/7 net/bnxt: fix MTU setting
In reply to Ajit KhapardeThe HW can support maximum frame length of 9600 bytes. And we are currently capping the max frame size to 9500 bytes.
--- drivers/net/bnxt/bnxt.h | 2 +- drivers/net/bnxt/bnxt_ethdev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt.h +1 -1
@@ -20,7 +20,7 @@#include "bnxt_cpr.h" -#define BNXT_MAX_MTU 9500 +#define BNXT_MAX_MTU 9578#define VLAN_TAG_SIZE 4#define BNXT_VF_RSV_NUM_RSS_CTX 1#define BNXT_VF_RSV_NUM_L2_CTX 4
drivers/net/bnxt/bnxt_ethdev.c +1 -1
@@ -453,7 +453,7 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,/* Fast path specifics */ dev_info->min_rx_bufsize =1 ; dev_info->max_rx_pktlen =BNXT_MAX_MTU +ETHER_HDR_LEN +ETHER_CRC_LEN - +VLAN_TAG_SIZE ; + +VLAN_TAG_SIZE *2 ; dev_info->rx_offload_capa =BNXT_DEV_RX_OFFLOAD_SUPPORT ;if (bp->flags &BNXT_FLAG_PTP_SUPPORTED )
Signature · 1 line
2.15.2 (Apple Git-101.1)
PATCH 4/7 net/bnxt: update HWRM version
In reply to Ajit KhapardeUpdate the HWRM API to version 1.9.2.45
--- drivers/net/bnxt/bnxt_stats.c | 12 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 20527 +++++++++++++++---------------- 2 files changed, 9780 insertions(+), 10759 deletions(-)
drivers/net/bnxt/bnxt_stats.c +6 -6
@@ -26,8 +26,8 @@ static const struct bnxt_xstats_name_off bnxt_rx_stats_strings[] = { rx_256b_511b_frames)}, {"rx_512b_1023b_frames" , offsetof(struct rx_port_stats , rx_512b_1023b_frames)}, - {"rx_1024b_1518_frames", offsetof(struct rx_port_stats, - rx_1024b_1518_frames)}, + {"rx_1024b_1518b_frames", offsetof(struct rx_port_stats, + rx_1024b_1518b_frames)}, {"rx_good_vlan_frames", offsetof(struct rx_port_stats, rx_good_vlan_frames)}, {"rx_1519b_2047b_frames", offsetof(struct rx_port_stats,
@@ -93,12 +93,12 @@ static const struct bnxt_xstats_name_off bnxt_tx_stats_strings[] = { tx_256b_511b_frames)}, {"tx_512b_1023b_frames" , offsetof(struct tx_port_stats , tx_512b_1023b_frames)}, - {"tx_1024b_1518_frames", offsetof(struct tx_port_stats, - tx_1024b_1518_frames)}, + {"tx_1024b_1518b_frames", offsetof(struct tx_port_stats, + tx_1024b_1518b_frames)}, {"tx_good_vlan_frames", offsetof(struct tx_port_stats, tx_good_vlan_frames)}, - {"tx_1519b_2047_frames", offsetof(struct tx_port_stats, - tx_1519b_2047_frames)}, + {"tx_1519b_2047b_frames", offsetof(struct tx_port_stats, + tx_1519b_2047b_frames)}, {"tx_2048b_4095b_frames", offsetof(struct tx_port_stats, tx_2048b_4095b_frames)}, {"tx_4096b_9216b_frames", offsetof(struct tx_port_stats,
drivers/net/bnxt/hsi_struct_def_dpdk.h +9774 -10753
2,974 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.15.2 (Apple Git-101.1)
Part of the diff is not shown here. View the raw message.
PATCH 5/7 net/bnxt: add support for extended port counters
In reply to Ajit KhapardeThis patch adds support extended port statistics like COS bytes, packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
--- drivers/net/bnxt/bnxt.h | 8 ++ drivers/net/bnxt/bnxt_ethdev.c | 30 +++++- drivers/net/bnxt/bnxt_hwrm.c | 44 +++++++++ drivers/net/bnxt/bnxt_hwrm.h | 5 + drivers/net/bnxt/bnxt_stats.c | 209 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 289 insertions(+), 7 deletions(-)
drivers/net/bnxt/bnxt.h +8 -0
@@ -250,6 +250,8 @@ struct bnxt {#define BNXT_FLAG_UPDATE_HASH (1 << 5)#define BNXT_FLAG_PTP_SUPPORTED (1 << 6)#define BNXT_FLAG_MULTI_HOST (1 << 7) +#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8) +#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -264,6 +266,9 @@ struct bnxt {const void *rx_mem_zone;struct rx_port_stats *hw_rx_port_stats;rte_iova_t hw_rx_port_stats_map; +struct rx_port_stats_ext *hw_rx_port_stats_ext; +rte_iova_t hw_rx_port_stats_ext_map; +uint16_t fw_rx_port_stats_ext_size;unsigned int tx_nr_rings;unsigned int tx_cp_nr_rings;
@@ -271,6 +276,9 @@ struct bnxt {const void *tx_mem_zone;struct tx_port_stats *hw_tx_port_stats;rte_iova_t hw_tx_port_stats_map; +struct tx_port_stats_ext *hw_tx_port_stats_ext; +rte_iova_t hw_tx_port_stats_ext_map; +uint16_t fw_tx_port_stats_ext_size;/* Default completion ring */ struct bnxt_cp_ring_info *def_cp_ring;
drivers/net/bnxt/bnxt_ethdev.c +28 -2
@@ -3221,7 +3221,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct rx_port_stats ) +512 ); +sizeof (struct rx_port_stats ) + +sizeof (struct rx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len, SOCKET_ID_ANY,
@@ -3257,7 +3259,9 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) mz_name[RTE_MEMZONE_NAMESIZE -1 ] =0 ; mz =rte_memzone_lookup (mz_name); total_alloc_len =RTE_CACHE_LINE_ROUNDUP ( -sizeof (struct tx_port_stats ) +512 ); +sizeof (struct tx_port_stats ) + +sizeof (struct tx_port_stats_ext ) + +512 );if (!mz) { mz = rte_memzone_reserve(mz_name, total_alloc_len,
@@ -3288,8 +3292,30 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) bp->hw_tx_port_stats_map = mz_phys_addr; bp->flags |=BNXT_FLAG_PORT_STATS ; + +/* Display extended statistics if FW supports it */ +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_8_4 || + bp->hwrm_spec_code ==HWRM_SPEC_CODE_1_9_0 ) + goto skip_ext_stats; + + bp->hw_rx_port_stats_ext = (void *) + (bp->hw_rx_port_stats +sizeof (struct rx_port_stats )); + bp->hw_rx_port_stats_ext_map = bp->hw_rx_port_stats_map + +sizeof (struct rx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_RX_PORT_STATS ; + + +if (bp->hwrm_spec_code <HWRM_SPEC_CODE_1_9_2 ) { + bp->hw_tx_port_stats_ext = (void *) + (bp->hw_tx_port_stats +sizeof (struct tx_port_stats )); + bp->hw_tx_port_stats_ext_map = + bp->hw_tx_port_stats_map + +sizeof (struct tx_port_stats ); + bp->flags |=BNXT_FLAG_EXT_TX_PORT_STATS ; + } } +skip_ext_stats: rc =bnxt_alloc_hwrm_resources (bp);if (rc) { PMD_DRV_LOG(ERR,
drivers/net/bnxt/bnxt_hwrm.c +44 -0
47 lines not on this page · raw message
drivers/net/bnxt/bnxt_hwrm.h +5 -0
@@ -32,6 +32,10 @@ struct bnxt_cp_ring_info;#define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESV_STRATEGY_MINIMAL_STATIC \ HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC +#define HWRM_SPEC_CODE_1_8_4 0x10804 +#define HWRM_SPEC_CODE_1_9_0 0x10900 +#define HWRM_SPEC_CODE_1_9_2 0x10902 +int bnxt_hwrm_cfa_l2_clear_rx_mask (struct bnxt *bp,struct bnxt_vnic_info *vnic); int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic,
@@ -174,4 +178,5 @@ int bnxt_vnic_rss_configure(struct bnxt *bp,int bnxt_hwrm_set_ring_coal (struct bnxt *bp,struct bnxt_coal *coal,uint16_t ring_id);int bnxt_hwrm_check_vf_rings (struct bnxt *bp); +int bnxt_hwrm_ext_port_qstats (struct bnxt *bp);#endif
drivers/net/bnxt/bnxt_stats.c +204 -5
256 lines not on this page · raw message
Signature · 1 line
2.15.2 (Apple Git-101.1)
PATCH 6/7 net/bnxt: add support to enable new mailbox channel
In reply to Ajit KhapardeFor hardware having multiple embedded management processors the firmware has added support to indicate if the comm channel to the processor has been enabled. If the channel is enabled, switch the CFA NTUPLE and EM filtering commands to use the kong channel.
--- drivers/net/bnxt/bnxt.h | 11 ++ drivers/net/bnxt/bnxt_hwrm.c | 333 ++++++++++++++++++++++--------------------- 2 files changed, 184 insertions(+), 160 deletions(-)
drivers/net/bnxt/bnxt.h +11 -0
@@ -33,6 +33,13 @@#define BNXT_MAX_RX_RING_DESC 8192#define BNXT_DB_SIZE 0x80 +/* Chimp Communication Channel */ +#define GRCPF_REG_CHIMP_CHANNEL_OFFSET 0x0 +#define GRCPF_REG_CHIMP_COMM_TRIGGER 0x100 +/* Kong Communication Channel */ +#define GRCPF_REG_KONG_CHANNEL_OFFSET 0xA00 +#define GRCPF_REG_KONG_COMM_TRIGGER 0xB00 +#define BNXT_INT_LAT_TMR_MIN 75#define BNXT_INT_LAT_TMR_MAX 150#define BNXT_NUM_CMPL_AGGR_INT 36
@@ -252,6 +259,7 @@ struct bnxt {#define BNXT_FLAG_MULTI_HOST (1 << 7)#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9) +#define BNXT_FLAG_KONG_MB_EN (1 << 10)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -259,6 +267,8 @@ struct bnxt {#define BNXT_NPAR (bp) ((bp)->port_partition_type)#define BNXT_MH (bp) ((bp)->flags & BNXT_FLAG_MULTI_HOST)#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp)) +#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp. +#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
@@ -299,6 +309,7 @@ struct bnxt {uint8_t mac_addr[ETHER_ADDR_LEN ];uint16_t hwrm_cmd_seq; +uint16_t kong_cmd_seq;void *hwrm_cmd_resp_addr;rte_iova_t hwrm_cmd_resp_dma_addr;void *hwrm_short_cmd_req_addr;
drivers/net/bnxt/bnxt_hwrm.c +173 -160
1,136 lines not on this page · raw message
Signature · 1 line
2.15.2 (Apple Git-101.1)
PATCH 7/7 net/bnxt: add support for trusted VF
In reply to Ajit KhapardeIn the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands. Newer firmware has added support to allow VF to be trusted. Now the VF queries if it is a trusted entity and based on that it can send HWRM commands to the firmware.
--- drivers/net/bnxt/bnxt.h | 2 ++ drivers/net/bnxt/bnxt_cpr.c | 1 + drivers/net/bnxt/bnxt_ethdev.c | 4 ++-- drivers/net/bnxt/bnxt_hwrm.c | 8 ++++++++ 4 files changed, 13 insertions(+), 2 deletions(-)
drivers/net/bnxt/bnxt.h +2 -0
@@ -260,6 +260,7 @@ struct bnxt {#define BNXT_FLAG_EXT_RX_PORT_STATS (1 << 8)#define BNXT_FLAG_EXT_TX_PORT_STATS (1 << 9)#define BNXT_FLAG_KONG_MB_EN (1 << 10) +#define BNXT_FLAG_TRUSTED_VF_EN (1 << 11)#define BNXT_FLAG_NEW_RM (1 << 30)#define BNXT_FLAG_INIT_DONE (1 << 31)#define BNXT_PF (bp) (!((bp)->flags & BNXT_FLAG_VF))
@@ -269,6 +270,7 @@ struct bnxt {#define BNXT_SINGLE_PF (bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp))#define BNXT_USE_CHIMP_MB 0 //For non-CFA commands, everything uses Chimp.#define BNXT_USE_KONG (bp) ((bp)->flags & BNXT_FLAG_KONG_MB_EN) +#define BNXT_VF_IS_TRUSTED (bp) ((bp)->flags & BNXT_FLAG_TRUSTED_VF_EN)unsigned int rx_nr_rings;unsigned int rx_cp_nr_rings;
drivers/net/bnxt/bnxt_cpr.c +1 -0
@@ -35,6 +35,7 @@ void bnxt_handle_async_event(struct bnxt *bp,break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE :PMD_DRV_LOG (INFO ,"Async event: VF config changed\n" ); +bnxt_hwrm_func_qcfg (bp);break ;case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED :PMD_DRV_LOG (INFO ,"Port conn async event\n" );
drivers/net/bnxt/bnxt_ethdev.c +2 -2
@@ -757,7 +757,7 @@ static int bnxt_mac_addr_add_op(struct rte_eth_dev *eth_dev,struct bnxt_vnic_info *vnic = &bp->vnic_info[pool];struct bnxt_filter_info *filter; -if (BNXT_VF (bp)) { +if (BNXT_VF (bp) & !BNXT_VF_IS_TRUSTED (bp)) {PMD_DRV_LOG (ERR ,"Cannot add MAC address to a VF interface\n" );return -ENOTSUP ; }
@@ -1449,7 +1449,7 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)struct bnxt_filter_info *filter;int rc; -if (BNXT_VF (bp)) +if (BNXT_VF (bp) && !BNXT_VF_IS_TRUSTED (bp))return -EPERM ;memcpy (bp->mac_addr, addr,sizeof (bp->mac_addr));
drivers/net/bnxt/bnxt_hwrm.c +8 -0
@@ -909,6 +909,9 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) bp->flags |=BNXT_FLAG_KONG_MB_EN ;PMD_DRV_LOG (DEBUG ,"Kong mailbox channel enabled\n" ); } +if (dev_caps_cfg & +HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_TRUSTED_VF_SUPPORTED ) +PMD_DRV_LOG (DEBUG ,"FW supports Trusted VFs\n" ); error:HWRM_UNLOCK ();
@@ -2458,6 +2461,11 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)if (BNXT_PF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST )) bp->flags |=BNXT_FLAG_MULTI_HOST ; +if (BNXT_VF (bp) && (flags &HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF )) { + bp->flags |=BNXT_FLAG_TRUSTED_VF_EN ; +PMD_DRV_LOG (INFO ,"Trusted VF cap enabled\n" ); + } +switch (resp->port_partition_type) {case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 :case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 :
Signature · 1 line
2.15.2 (Apple Git-101.1)
Quoted 10 lines · Ajit Khaparde
Patchset against dpdk-next-net.
Please apply.Ajit Khaparde (5):
net/bnxt: fix MTU setting
net/bnxt: update HWRM version
net/bnxt: add support for extended port counters net/bnxt: add support to enable new mailbox channel net/bnxt: add support for trusted VF
Quoted 3 lines
Somnath Kotur (2):
net/bnxt: get rid of ff pools array and use the vnic info array net/bnxt: fix uninitialized ptr access in transmit handler
Hi Ajit,
Patchset mostly looks OK, can you please send a new version to address build error.
Thanks,
ferruh