xilinx: Update xilinx configurations
Michal Simek
maintainercover xilinx: Update xilinx configurations
Hi,
I am sending various patches for updating defconfigs and also one patch for disabling calling zynqmp_pmufw_node() in Versal case.
Thanks,
Michal
Ashok Reddy Soma (5):
xilinx: zynqmp: Disable various configs for mini U-Boot
xilinx: zynqmp: Disable LMB for mini u-boot
firmware: zynqmp: Skip loading config object for Versal
xilinx: versal: Enable power domain driver
xilinx: versal: Define CONFIG_CQSPI_REF_CLK
Michal Simek (1):
xilinx: versal: Enable i2c mux uclass with pca954x driver
configs/xilinx_versal_virt_defconfig | 6 ++++++ configs/xilinx_zynqmp_mini_nand_defconfig | 1 + configs/xilinx_zynqmp_mini_nand_single_defconfig | 1 + configs/xilinx_zynqmp_mini_qspi_defconfig | 14 ++++++++++++-- drivers/power/domain/zynqmp-power-domain.c | 5 ++++- 5 files changed, 24 insertions(+), 3 deletions(-)
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 1/6 xilinx: versal: Enable i2c mux uclass with pca954x driver
Xilinx is using pca954x i2c muxes on a lot of boards that's why enable this driver by default.
---
configs/xilinx_versal_virt_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/xilinx_versal_virt_defconfig +2 -0
@@ -69,6 +69,8 @@ CONFIG_FPGA_XILINX=y CONFIG_FPGA_VERSALPL=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y CONFIG_DM_MAILBOX=y CONFIG_ZYNQMP_IPI=y CONFIG_MISC=y
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 2/6 xilinx: zynqmp: Disable various configs for mini U-Boot
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
With 2022.01-rc3 upgrade, the size of the mini U-Boot increased and is not able to fit in OCM. Hence disable unnecessary configs and make room.
---
configs/xilinx_zynqmp_mini_qspi_defconfig | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
configs/xilinx_zynqmp_mini_qspi_defconfig +12 -2
@@ -3,7 +3,7 @@ CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_qspi" CONFIG_SYS_ICACHE_OFF=y CONFIG_ARCH_ZYNQMP=y CONFIG_SYS_TEXT_BASE=0xFFFC0000 -CONFIG_SYS_MALLOC_LEN=0x1a00 +CONFIG_SYS_MALLOC_LEN=0x1b00 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
@@ -19,7 +19,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_LEGACY_IMAGE_FORMAT is not set +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set # CONFIG_AUTOBOOT is not set +CONFIG_LOGLEVEL=0 # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y
@@ -62,6 +64,7 @@ CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SLEEP is not set +# CONFIG_CMD_MP is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -69,17 +72,24 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y +# CONFIG_FIRMWARE is not set +# CONFIG_GPIO is not set +# CONFIG_I2C is not set +# CONFIG_INPUT is not set # CONFIG_MMC is not set -CONFIG_SPI_FLASH_BAR=y +# CONFIG_SPI_FLASH_SMART_HWCAPS is not set +# CONFIG_SPI_FLASH_UNLOCK_ALL is not set CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +# CONFIG_POWER is not set CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y +# CONFIG_FAT_WRITE is not set CONFIG_PANIC_HANG=y # CONFIG_GZIP is not set # CONFIG_LMB is not set
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 3/6 xilinx: zynqmp: Disable LMB for mini u-boot
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
LMB is not required for mini u-boot which runs out of on chip memory. Disable CONFIG_LMB from mini u-boot defconfig's.
---
configs/xilinx_zynqmp_mini_nand_defconfig | 1 + configs/xilinx_zynqmp_mini_nand_single_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/xilinx_zynqmp_mini_nand_defconfig +1 -0
@@ -65,3 +65,4 @@ CONFIG_SYS_NAND_MAX_CHIPS=2 CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y # CONFIG_GZIP is not set +# CONFIG_LMB is not set
configs/xilinx_zynqmp_mini_nand_single_defconfig +1 -0
@@ -64,3 +64,4 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y # CONFIG_GZIP is not set +# CONFIG_LMB is not set
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 4/6 firmware: zynqmp: Skip loading config object for Versal
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
SET_CONFIGURATION is not yet implemented for Versal platforms. Skip loading config object for Versal until support is added.
---
drivers/power/domain/zynqmp-power-domain.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/power/domain/zynqmp-power-domain.c +4 -1
@@ -25,7 +25,10 @@ static int zynqmp_power_domain_request(struct power_domain *power_domain) {dev_dbg (power_domain->dev,"Request for id: %ld\n" , power_domain->id); -return zynqmp_pmufw_node (power_domain->id); +if (IS_ENABLED (CONFIG_ARCH_ZYNQMP )) +return zynqmp_pmufw_node (power_domain->id); + +return 0 ; }static int zynqmp_power_domain_free (struct power_domain *power_domain)
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 5/6 xilinx: versal: Enable power domain driver
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
Enable power domain driver to request node for all the IP's that are enabled in DT.
---
configs/xilinx_versal_virt_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/xilinx_versal_virt_defconfig +2 -0
@@ -104,6 +104,8 @@ CONFIG_PHY_GIGE=y CONFIG_XILINX_AXIEMAC=y CONFIG_XILINX_AXIMRMAC=y CONFIG_ZYNQ_GEM=y +CONFIG_POWER_DOMAIN=y +CONFIG_ZYNQMP_POWER_DOMAIN=y CONFIG_DM_RESET=y CONFIG_RESET_ZYNQMP=y CONFIG_ARM_DCC=y
Signature · 1 line
2.36.1
Michal Simek
maintainerPATCH 6/6 xilinx: versal: Define CONFIG_CQSPI_REF_CLK
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
With commit 55b3ba4c2ba4 ("spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig") CONFIG_CQSPI_REF_CLK is moved to Kconfig.
The static value via Kconfig is a fallback option in case of clock framework is not enabled or fails for some reason.
---
configs/xilinx_versal_virt_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/xilinx_versal_virt_defconfig +2 -0
@@ -115,6 +115,8 @@ CONFIG_SOC_XILINX_VERSAL=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y +CONFIG_HAS_CQSPI_REF_CLK=y +CONFIG_CQSPI_REF_CLK=200000000 CONFIG_CADENCE_OSPI_VERSAL=y CONFIG_ZYNQ_SPI=y CONFIG_USB=y
Signature · 1 line
2.36.1
Quoted 19 lines · Michal Simek
Hi,
I am sending various patches for updating defconfigs and also one patch for disabling calling
zynqmp_pmufw_node()in Versal case.Thanks,
MichalAshok Reddy Soma (5):
xilinx: zynqmp: Disable various configs for mini U-Boot
xilinx: zynqmp: Disable LMB for mini u-boot
firmware: zynqmp: Skip loading config object for Versal
xilinx: versal: Enable power domain driver
xilinx: versal: DefineCONFIG_CQSPI_REF_CLKMichal Simek (1):
xilinx: versal: Enable i2c mux uclass with pca954x driver
Quoted 7 lines
configs/xilinx_versal_virt_defconfig | 6 ++++++ configs/xilinx_zynqmp_mini_nand_defconfig | 1 + configs/xilinx_zynqmp_mini_nand_single_defconfig | 1 + configs/xilinx_zynqmp_mini_qspi_defconfig | 14 ++++++++++++-- drivers/power/domain/zynqmp-power-domain.c | 5 ++++- 5 files changed, 24 insertions(+), 3 deletions(-)
applied.
M