board/orangepi/orangepi-zero-plus2: fix build after genimage update
PATCH 1/2 board/orangepi/orangepi-zero-plus2: fix build after genimage update
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it.
--- board/orangepi/orangepi-zero-plus2/genimage.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
board/orangepi/orangepi-zero-plus2/genimage.cfg +3 -3
@@ -22,11 +22,11 @@ image sdcard.img { in-partition-table = "no" image = "u-boot-sunxi-with-spl.bin" offset = 8K - size = 1032K # 1MB - 8KB + 16KB(GPT) + size = 1016K # 1MB - 8KB } partition boot { - partition-type = 0xC + partition-type-uuid = "F" bootable = "true" image = "boot.vfat" }
@@ -34,7 +34,7 @@ image sdcard.img { # 'rootfs' will be used as the partition label, used # with root=PARTLABEL=rootfs kernel command line partition rootfs { - partition-type = 0x83 + partition-type-uuid = "L" image = "rootfs.ext4" size = 256M }
Signature · 6 lines
2.35.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/2 configs/orangepi_zero_plus2: BSP update
Bump Linux kernel to 5.16.1 and U-Boot to 2022.01. Select option BR2_TARGET_UBOOT_NEEDS_OPENSSL since U-Boot requires openssl. Root filesystem does not fit into default 60M anymore, so increase its size.
--- configs/orangepi_zero_plus2_defconfig | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
configs/orangepi_zero_plus2_defconfig +5 -3
@@ -2,7 +2,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay"
@@ -17,9 +17,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
@@ -33,7 +34,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-pl # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16.1" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"
@@ -56,6 +57,7 @@ BR2_PACKAGE_WPA_SUPPLICANT_CLI=y BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus2" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y
Signature · 6 lines
2.35.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/2] configs/orangepi_zero_plus2: BSP update
Hi Sergey,
Quoted 4 lines · Sergey Matyukevich
Bump Linux kernel to 5.16.1 and U-Boot to 2022.01. Select option
BR2_TARGET_UBOOT_NEEDS_OPENSSLsince U-Boot requires openssl. Root filesystem does not fit into default 60M anymore, so increase its size.
Same as previous patch we need a:
Fixes:
url where you point the failure
There is the latest gitlab pipeline here, especially this board build failure:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371
But this was for previous patch, sorry, so please point this ^^^ URL there. And here probably you've found the bug by yourself, correct?
Best regards
Signature · 2 lines
Giulio Benetti Benetti Engineering sas
Quoted 47 lines
Signed-off-by Sergey Matyukevich <[email protected]>--- configs/orangepi_zero_plus2_defconfig | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)configs/orangepi_zero_plus2_defconfig +5
-3@@ -2,7 +2,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay"@@ -17,9 +17,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y@@ -33,7 +34,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-pl # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16.1" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"@@ -56,6 +57,7 @@ BR2_PACKAGE_WPA_SUPPLICANT_CLI=y BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus2" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y
Signature · 6 lines
Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Sergey,
Quoted 6 lines · Sergey Matyukevich
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps:
Quoted 6 lines
ERROR: hdimage(sdcard.img): partition [GPT array] (offset
0x100000, size0x4000) overlaps previous partition u-boot (offset0x2000, size0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it.
Here we need a:
Fixes:
url where you point the failure
Best regards
Signature · 2 lines
Giulio Benetti Benetti Engineering sas
Quoted 24 lines
Signed-off-by Sergey Matyukevich <[email protected]>--- board/orangepi/orangepi-zero-plus2/genimage.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)board/orangepi/orangepi-zero-plus2/genimage.cfg +2
-2@@ -22,11 +22,11 @@ image sdcard.img { in-partition-table = "no" image = "u-boot-sunxi-with-spl.bin" offset = 8K - size = 1032K # 1MB - 8KB + 16KB(GPT) + size = 1016K # 1MB - 8KB } partition boot { - partition-type = 0xC + partition-type-uuid = "F" bootable = "true" image = "boot.vfat" }
board/orangepi/orangepi-zero-plus2/genimage.cfg image sdcard.img { · line 40
Quoted 8 lines
board/orangepi/orangepi-zero-plus2/genimage.cfg +1
-1@@ -34,7 +34,7 @@ image sdcard.img { # 'rootfs' will be used as the partition label, used # with root=PARTLABEL=rootfs kernel command line partition rootfs { - partition-type = 0x83 + partition-type-uuid = "L" image = "rootfs.ext4" size = 256M }
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 12 lines
Hi Sergey,
Quoted 9 lines · Sergey Matyukevich
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset
0x100000, size0x4000) overlaps previous partition u-boot (offset0x2000, size0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
Quoted 7 lines
Quoted 3 lines
To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it.
Here we need a:
Fixes:
url where you point the failure
You are right. But I don't have a CI report for this. I noticed the problem when building images locally.
Regards,
Sergey
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 16 lines · Sergey Matyukevich
Quoted 16 lines
Hi Sergey,
Quoted 12 lines · Sergey Matyukevich
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset
0x100000, size0x4000) overlaps previous partition u-boot (offset0x2000, size0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it.
Quoted 6 lines
Quoted 3 lines
Here we need a:
Fixes:
url where you point the failureYou are right. But I don't have a CI report for this. I noticed the problem when building images locally.
Check here for this patch:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371
for the other you've found it locally.
Signature · 6 lines
Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 9 lines · On Tue, 1 Feb 2022 00:24:55 +0300 Sergey Matyukevich <[email protected]>…
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset
0x100000, size0x4000) overlaps previous partition u-boot (offset0x2000, size0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
Quoted 8 lines
To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it.
Signed-off-by Sergey Matyukevich <[email protected]>--- board/orangepi/orangepi-zero-plus2/genimage.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Both applied, thanks! In the commit log of the first patch, I've added a reference to the Gitlab CI failure that the patch is fixing, as suggested by Giulio.
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot