report: 2.6.14-rc2-git8 crashed with scsi error after 40 hours
Here is the more than weekly error report about our usenetgateway. 2.6.12-mm1 keeps running for weeks.
2.6.1[34] keeps crashing within days
Hardware isn't the problem, software is (my guess is acpi/irq) ethernet is doing >200megabit/s average on 2 cards simultanious.
hardware:
tyan amd64 - opteron 250 (dual cpu, but UP kernel) 4Gig ram
dual scsi controller
8 x scsi disks
acenic gig-E (FO)
onboard gig-E (cupper)
software:
debian-pure64 amd
config/crash/dmesg @
http://newsgate.newsserver.nl/kernel/2.6.14-rc2-git8
Currently trying 2.6.14-rc2-mm2.
When that fails i will try rc3-git[latest]
Let me know when someone wants to have more info or a test setup.
Danny
2.6.14-rc2-mm2 barfed as well, was: 2.6.14-rc2-git8 crashed with scsi error after 40 hours
2.6.14-rc2-mm2 just any other 2.6.1[34] kernel so far didn't get _my_ sign of aproval ;-)
reboot system boot 2.6.14-rc2-mm2 Sun Oct 2 10:05 - crash (1+13:15)
----------
scsi0:0:0:0: Attempting to queue an ABORT message:CDB: 0x2a 0x0 0x1 0xdc 0x49 0xca 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x26 Mode 0x22 Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK) SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 128 CMDS_PENDING = 32 LASTSCB 0x1a CURRSCB 0x1a NEXTSCB 0xff00 qinstart = 27585 qinfifonext = 27585
QINFIFO:WAITING_TID_QUEUES:
Pending list:
36 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] 23 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
------------
Full crash, dmesg/config etc @ http://newsgate.newsserver.nl/kernel/2.6.14-rc2-mm2/
Now compiling 2.6.14-rc3-git3 ...
Danny